Symbol Technologies MC75A6 EDA (Enterprise Digital Assistant) User Manual MC75A User Guide

Symbol Technologies Inc EDA (Enterprise Digital Assistant) MC75A User Guide

user manual 1

MC75A Enterprise Digital AssistantUser GuideDRAFT
DRAFT
MC75A Enterprise Digital AssistantUser Guide72E-133503-01Rev. AFebruary 2010DRAFT
ii MC75A Enterprise Digital Assistant User Guide© 2010 by Motorola, Inc. All rights reserved.No part of this publication may be reproduced or used in any form, or by any electrical or mechanical means, without permission in writing from Motorola. This includes electronic or mechanical means, such as photocopying, recording, or information storage and retrieval systems. The material in this manual is subject to change without notice.The software is provided strictly on an “as is” basis. All software, including firmware, furnished to the user is on a licensed basis. Motorola grants to the user a non-transferable and non-exclusive license to use each software or firmware program delivered hereunder (licensed program). Except as noted below, such license may not be assigned, sublicensed, or otherwise transferred by the user without prior written consent of Motorola. No right to copy a licensed program in whole or in part is granted, except as permitted under copyright law. The user shall not modify, merge, or incorporate any form or portion of a licensed program with other program material, create a derivative work from a licensed program, or use a licensed program in a network without written permission from Motorola. The user agrees to maintain Motorola’s copyright notice on the licensed programs delivered hereunder, and to include the same on any authorized copies it makes, in whole or in part. The user agrees not to decompile, disassemble, decode, or reverse engineer any licensed program delivered to the user or any portion thereof.Motorola reserves the right to make changes to any software or product to improve reliability, function, or design.Motorola does not assume any product liability arising out of, or in connection with, the application or use of any product, circuit, or application described herein.No license is granted, either expressly or by implication, estoppel, or otherwise under any Motorola, Inc., intellectual property rights. An implied license only exists for equipment, circuits, and subsystems contained in Motorola products.MOTOROLA and the Stylized M Logo and Symbol and the Symbol logo are registered in the US Patent & Trademark Office. Bluetooth is a registered trademark of Bluetooth SIG. Microsoft, Windows and ActiveSync are either registered trademarks or trademarks of Microsoft Corporation. All other product or service names are the property of their respective owners.Motorola, Inc.One Motorola PlazaHoltsville, New York 11742-1300http://www.motorola.com/enterprisemobilityPatentsThis product is covered by one or more of the patents listed on the website: http://www.motorola.com/enterprisemobility/patents.DRAFT
iiiRevision HistoryChanges to the original manual are listed below:Change Date Description-01 Rev. A 02/2010 Initial release.DRAFT
iv MC75A Enterprise Digital Assistant User GuideDRAFT
Table of ContentsPatents.................................................................................................................................................. iiRevision History.................................................................................................................................... iiiAbout This GuideIntroduction........................................................................................................................................... xiiiDocumentation Set xiiiConfigurations....................................................................................................................................... xivSoftware Versions xivChapter Descriptions ............................................................................................................................ xviNotational Conventions......................................................................................................................... xviiRelated Documents .............................................................................................................................. xviiService Information............................................................................................................................... xviiiChapter 1: Getting StartedIntroduction .......................................................................................................................................... 1-1Unpacking ............................................................................................................................................ 1-2Getting Started ..................................................................................................................................... 1-2Installing the SIM Card ................................................................................................................... 1-3Installing the Main Battery .............................................................................................................. 1-4Charging the Battery ...................................................................................................................... 1-5Charging the Main Battery and Memory Backup Battery ......................................................... 1-5Charging Spare Batteries ......................................................................................................... 1-7Charging Temperature ............................................................................................................. 1-7Powering On the MC75A ............................................................................................................... 1-7Calibrating the Screen ................................................................................................................... 1-7Checking Battery Status ................................................................................................................ 1-8Micro Secure Digital (microSD) Card ................................................................................................... 1-8Adjusting the Handstrap ...................................................................................................................... 1-9Replacing the Main Battery .................................................................................................................. 1-9Changing the Power Settings ........................................................................................................ 1-11Changing the Backlight Settings .................................................................................................... 1-11Changing the Keypad Backlight Settings ....................................................................................... 1-11Turning Off the Radios ................................................................................................................... 1-12DRAFT
vi MC75A Enterprise Digital Assistant User GuideChapter 2: Using the MC75AIntroduction .......................................................................................................................................... 2-1Home Screen ....................................................................................................................................... 2-1Status Bar ...................................................................................................................................... 2-2Today Screen ................................................................................................................................. 2-4Classic Today Screen .................................................................................................................... 2-5Soft Keys Bar ................................................................................................................................. 2-6Start Screen ................................................................................................................................... 2-7Adjusting Volume ................................................................................................................................. 2-12Battery Status Indications .................................................................................................................... 2-13Battery Reserve Options ................................................................................................................ 2-13Main Battery Temperature Notifications ......................................................................................... 2-14LED Indicators ..................................................................................................................................... 2-15Resetting the MC75A ........................................................................................................................... 2-17Performing a Warm Boot ............................................................................................................... 2-17Performing a Cold Boot .................................................................................................................. 2-17Waking the MC75A .............................................................................................................................. 2-18Locking the MC75A ............................................................................................................................. 2-18Password Locking .......................................................................................................................... 2-19Function Buttons .................................................................................................................................. 2-20Stylus ................................................................................................................................................... 2-21Entering Data ....................................................................................................................................... 2-22Power Management ....................................................................................................................... 2-23Display Orientation ......................................................................................................................... 2-23Free Fall Detection ......................................................................................................................... 2-24Taking Photos ...................................................................................................................................... 2-24Recording Video .................................................................................................................................. 2-24Viewing Photos and Videos ................................................................................................................. 2-25Using IrDA ........................................................................................................................................... 2-25Infrared Connection ....................................................................................................................... 2-26Exchanging Files using IR Connection .................................................................................... 2-26Chapter 3: Data CaptureIntroduction .......................................................................................................................................... 3-1Laser Scanning .................................................................................................................................... 3-1Scanning Considerations ............................................................................................................... 3-1Bar Code Scanning ........................................................................................................................ 3-2Imaging ................................................................................................................................................ 3-2Operational Modes ......................................................................................................................... 3-3Imager Scanning ............................................................................................................................ 3-3Color Digital Camera ........................................................................................................................... 3-4Digital Camera Scanning ............................................................................................................... 3-4Chapter 4: Using the PhoneIntroduction .......................................................................................................................................... 4-1Accessing the Phone Keypad .............................................................................................................. 4-1Turning the Phone On and Off ............................................................................................................. 4-2Using a Wired Headset .................................................................................................................. 4-3DRAFT
Table of Contents viiUsing a Bluetooth Headset ............................................................................................................ 4-4Adjusting Audio Volume ................................................................................................................. 4-4Making a Call ....................................................................................................................................... 4-5Using the Phone Dialer .................................................................................................................. 4-5Using Contacts ............................................................................................................................... 4-5Using Call History .......................................................................................................................... 4-6Making a Speed Dial Call ............................................................................................................... 4-6Making an Emergency Call .................................................................................................................. 4-7Answering a Call .................................................................................................................................. 4-7Incoming Call Features .................................................................................................................. 4-8Smart Dialing ....................................................................................................................................... 4-8Muting a Call ........................................................................................................................................ 4-9Taking Notes ........................................................................................................................................ 4-10Using Speed Dial ................................................................................................................................. 4-11Adding a Speed Dial Entry ............................................................................................................. 4-11Editing a Speed Dial Entry ............................................................................................................. 4-13Deleting a Speed Dial Entry ........................................................................................................... 4-13Using Call History ................................................................................................................................ 4-14Managing Call History .................................................................................................................... 4-14Changing the Call History View ............................................................................................... 4-14Resetting the Recent Calls Counter ......................................................................................... 4-14Deleting All Call History Items .................................................................................................. 4-15Viewing Call Status .................................................................................................................. 4-16Using the Call History Menu .................................................................................................... 4-17Swapping Calls on an MC75A6 ........................................................................................................... 4-17Swapping Calls on an MC75A8 ........................................................................................................... 4-18Conference Calling on an MC75A6 ..................................................................................................... 4-19Three-way Calling on an MC75A8 ....................................................................................................... 4-21Text Messaging ................................................................................................................................... 4-21Viewing Text Messages ................................................................................................................. 4-21Sending a Text Message ............................................................................................................... 4-23Using a Dual Line SIM ......................................................................................................................... 4-24Chapter 5: Using GPS NavigationIntroduction .......................................................................................................................................... 5-1Software Installation ............................................................................................................................ 5-1MC75A GPS Setup .............................................................................................................................. 5-1Operation ............................................................................................................................................. 5-2GPS Maps on microSD Cards ....................................................................................................... 5-2Answering a Phone Call While Using GPS .................................................................................... 5-2Losing the GPS Signal While in a Vehicle ..................................................................................... 5-2Assisted GPS ....................................................................................................................................... 5-2Chapter 6: Using BluetoothIntroduction .......................................................................................................................................... 6-1Adaptive Frequency Hopping .............................................................................................................. 6-1Security ................................................................................................................................................ 6-2Bluetooth Power States ....................................................................................................................... 6-3DRAFT
viii MC75A Enterprise Digital Assistant User GuideCold Boot ................................................................................................................................. 6-3Warm Boot ............................................................................................................................... 6-4Suspend ................................................................................................................................... 6-4Resume .................................................................................................................................... 6-4Using Microsoft Bluetooth Stack .......................................................................................................... 6-4Turning the Bluetooth Radio Mode On and Off .............................................................................. 6-4Enabling Bluetooth ................................................................................................................... 6-4Disabling Bluetooth .................................................................................................................. 6-5Discovering Bluetooth Device(s) .................................................................................................... 6-5Available Services .......................................................................................................................... 6-8Object Push Services via Beam ............................................................................................... 6-8Internet Sharing ....................................................................................................................... 6-9Hands-free Services ................................................................................................................ 6-10Serial Port Services ................................................................................................................. 6-11ActiveSync Using Serial Port Services .................................................................................... 6-12Phone Book Access Profile Services ....................................................................................... 6-13Dial-Up Networking Services ................................................................................................... 6-14Connect to a HID Device ......................................................................................................... 6-14A2DP/AVRCP Services ........................................................................................................... 6-14Turning the Bluetooth Radio Mode On and Off .............................................................................. 6-16Disabling Bluetooth .................................................................................................................. 6-16Enabling Bluetooth ................................................................................................................... 6-16Modes ............................................................................................................................................ 6-16Wizard Mode ............................................................................................................................ 6-16Explorer Mode .......................................................................................................................... 6-16Discovering Bluetooth Device(s) .................................................................................................... 6-17Available Services .......................................................................................................................... 6-20File Transfer Services .............................................................................................................. 6-20Connecting to the Internet Using an Access Point ................................................................... 6-22Dial-Up Networking Services ................................................................................................... 6-22Object Exchange Push Services .............................................................................................. 6-23Headset Services ..................................................................................................................... 6-27Hands-free Services ................................................................................................................ 6-28Serial Port Services ................................................................................................................. 6-28ActiveSync Using Serial Port Services .................................................................................... 6-29Personal Area Network Services ............................................................................................. 6-30IrMC Synchronization Services ................................................................................................ 6-30A2DP/AVRCP Services ........................................................................................................... 6-30Connect to a HID Device ......................................................................................................... 6-31Bonding with Discovered Device(s) ............................................................................................... 6-32Bluetooth Settings .......................................................................................................................... 6-34Device Info Tab ........................................................................................................................ 6-34Services Tab ............................................................................................................................ 6-34Security Tab ............................................................................................................................. 6-42Discovery Tab .......................................................................................................................... 6-43Virtual COM Port Tab ............................................................................................................... 6-43HID Tab .................................................................................................................................... 6-44Profiles Tab .............................................................................................................................. 6-45System Parameters Tab .......................................................................................................... 6-46Miscellaneous Tab ................................................................................................................... 6-46DRAFT
Table of Contents ixChapter 7: AccessoriesIntroduction .......................................................................................................................................... 7-1Single Slot USB/Serial Cradle ............................................................................................................. 7-2Charging the MC75A Battery ......................................................................................................... 7-3Charging the Spare Battery ........................................................................................................... 7-3Battery Charging Indicators ........................................................................................................... 7-4Charging Temperature ............................................................................................................. 7-4Charging ........................................................................................................................................ 7-5Battery Charging Indicators ........................................................................................................... 7-5Charging Temperature ............................................................................................................. 7-6Charging ........................................................................................................................................ 7-7Battery Charging Indicators ........................................................................................................... 7-7Charging Temperature ............................................................................................................. 7-7Charging the MC75A Battery ......................................................................................................... 7-9Removing the MC75A .............................................................................................................. 7-10Charging the Spare Battery ........................................................................................................... 7-10Battery Charging Indicators ........................................................................................................... 7-11Charging Temperature ............................................................................................................. 7-11MC75A Battery Shim Installation ................................................................................................... 7-12Spare Battery Charging ................................................................................................................. 7-12Battery Charging Indicators ........................................................................................................... 7-13Charging Temperature ............................................................................................................. 7-13Attaching and Removing the MSR ................................................................................................. 7-14Using the MSR ............................................................................................................................... 7-14Getting Started ............................................................................................................................... 7-16Installation ...................................................................................................................................... 7-16Removal ............................................................................................................................................... 7-16Credit Card Transactions ............................................................................................................... 7-17Debit Card Transactions ................................................................................................................ 7-17Keypad ........................................................................................................................................... 7-18Display Messages .................................................................................................................... 7-19Check the DCR Battery Level ........................................................................................................ 7-19Installation ...................................................................................................................................... 7-21Removal ............................................................................................................................................... 7-21Credit Card Transactions ............................................................................................................... 7-22Debit Card Transactions ................................................................................................................ 7-22Chip and PIN Transactions ............................................................................................................ 7-23Keypad ..................................................................................................................................... 7-23Display Messages .......................................................................................................................... 7-24Battery Charging and Operating Power ......................................................................................... 7-27LED Charge Indications ................................................................................................................. 7-28Charging Temperature ............................................................................................................. 7-28Chapter 8: Maintenance & TroubleshootingIntroduction .......................................................................................................................................... 8-1Maintaining the MC75A ....................................................................................................................... 8-1Removing the Screen Protector ........................................................................................................... 8-2Battery Safety Guidelines .................................................................................................................... 8-2Cleaning ............................................................................................................................................... 8-3DRAFT
x MC75A Enterprise Digital Assistant User GuideMaterials Required ......................................................................................................................... 8-3Cleaning the MC75A ...................................................................................................................... 8-3Housing .................................................................................................................................... 8-3Display ..................................................................................................................................... 8-4Scanner Exit Window ............................................................................................................... 8-4Connector ................................................................................................................................ 8-4Cleaning Cradle Connectors .......................................................................................................... 8-4Cleaning Frequency ....................................................................................................................... 8-5Troubleshooting ................................................................................................................................... 8-5MC75A ........................................................................................................................................... 8-5Bluetooth Connection ..................................................................................................................... 8-7Single Slot USB/Serial Cradle ........................................................................................................ 8-8Four Slot Ethernet Cradle .............................................................................................................. 8-10Vehicle Cradle ................................................................................................................................ 8-10Four Slot Battery Charger .............................................................................................................. 8-11Cables ............................................................................................................................................ 8-12Magnetic Stripe Reader ................................................................................................................. 8-12Appendix A: Technical SpecificationsMC75A Technical Specifications ......................................................................................................... A-1MC75A ........................................................................................................................................... A-1Single Slot USB/Serial Cradle ........................................................................................................ A-6Four Slot Ethernet Cradle .............................................................................................................. A-6Four Slot Charge Only Cradle ........................................................................................................ A-7Four Slot Battery Charger .............................................................................................................. A-7Magnetic Stripe Reader ................................................................................................................. A-8Appendix B: KeypadsIntroduction .......................................................................................................................................... B-1Numeric Keypad Configuration ...................................................................................................... B-1DSD Keypad Configuration ............................................................................................................ B-5Alpha-numeric Keypad Configurations .......................................................................................... B-8Special Character Key ............................................................................................................. B-15Appendix C: Voice Quality ManagerIntroduction .......................................................................................................................................... C-1Features ............................................................................................................................................... C-1Enabling VQM ...................................................................................................................................... C-1Audio Modes ........................................................................................................................................ C-2Changing Audio Modes .................................................................................................................. C-2Voice Packet Prioritization ................................................................................................................... C-4Acoustic Echo Cancellation ............................................................................................................ C-4Limitations ...................................................................................................................................... C-4Disabling VQM ..................................................................................................................................... C-4GlossaryDRAFT
Table of Contents xiIndexDRAFT
xii MC75A Enterprise Digital Assistant User GuideDRAFT
About This GuideIntroductionThis guide provides information about using the MC75A Enterprise Digital Assistant (EDA) and accessories.Documentation SetThe documentation set for the MC75A provides information for specific user needs, and includes:•MC75A Quick Start Guide - describes how to get the MC75A EDA up and running.•MC75A Enterprise Digital Assistant User Guide - describes how to use the MC75A EDA.•MC75A Enterprise Digital Assistant Integrator Guide - describes how to set up the MC75A EDA and accessories.•Microsoft® Windows Mobile 6.0 Applications User Guide for Enterprise Mobility Devices - describes how to use Microsoft developed applications.•Enterprise Mobility Application Guide - describes how to use Enterprise Mobility developed sample applications.•Enterprise Mobility Developer Kit (EMDK) Help File - provides API information for writing applications.NOTE Screens and windows pictured in this guide are samples and can differ from actual screens.DRAFT
xiv MC75A Enterprise Digital Assistant User GuideConfigurationsThis guide covers the following configurations:Software VersionsThis guide covers various software configurations and references are made to operating system or software versions for:•Adaptation Kit Update (AKU) version•OEM version•Phone version•BTExplorer version•Fusion version•Phone version.AKU VersionTo determine the Adaptation Kit Update (AKU) version:Tap Start > Settings > System folder > About icon > Version tab.Configuration Radios Display Memory Data CaptureOperatingSystem KeypadsMC75A0 WPAN: BluetoothWLAN: 802.11a/b/g 3.5” VGA Color 256 MB RAM/1 GB Flash 1D laser scanner, 2D imager or cameraWindows Mobile 6.5 ClassicNumeric or Alphanumeric keypadMC75A6 WPAN: BluetoothWLAN: 802.11a/b/gWWAN: HSDPAGPS: SiRF III3.5” VGA Color 256 MB RAM/1 GB Flash 1D laser scanner, 2D imager or cameraWindows Mobile 6.5 ProfessionalNumeric, DSD or Alphanumeric keypadMC75A8 WPAN: BluetoothWLAN: 802.11a/b/gWWAN: EVDOGPS: SiRF III3.5” VGA Color 256 MB RAM/1 GB Flash 1D laser scanner, 2D imager or cameraWindows Mobile 6.5 ProfessionalNumeric, DSD or Alphanumeric keypadDRAFT
About This Guide xvThe second line lists the operating system version and the build number. The last part of the build number represents the AKU number. For example, Build 18552.0.7.5 indicates that the device is running AKU version 0.7.5.OEM VersionTo determine the OEM software version:Tap Start > Settings > System folder > System Info icon > System tab.BTExplorer SoftwareTo determine the BTExplorer software version:Tap Start > BTExplorer icon > Show BTExplorer> Menu > About.Fusion SoftwareTo determine the Fusion software version:Tap Start > Wireless Companion icon > Wireless Status icon > Versions.NOTE To view the BTExplorer version information, the StoneStreet One Bluetooth stack must be enabled. Refer to the MC75A Enterprise Digital Assistant Integrator Guide for more information.DRAFT
xvi MC75A Enterprise Digital Assistant User GuidePhone SoftwareTo determine the Phone software version:Tap Start > Phone > Menu > Options > Phone Info or Version Information tab.Chapter DescriptionsTopics covered in this guide are as follows:•Chapter 1, Getting Started provides information on getting the MC75A up and running for the first time.•Chapter 2, Using the MC75A provides basic instructions for using the MC75A, including powering on and resetting the MC75A, and entering and capturing data.•Chapter 3, Data Capture provides information for using the MC75A to capture data using the laser scanner, imager or camera.•Chapter 4, Using the Phone provides basic instructions for using the MC75A phone.•Chapter 5, Using GPS Navigation provides information about GPS navigation with the MC75A.•Chapter 6, Using Bluetooth explains Bluetooth functionality on the MC75A.•Chapter 7, Accessories describes the available accessories and how to use them with the MC75A.MC75A6 MC75A8DRAFT
About This Guide xvii•Chapter 8, Maintenance & Troubleshooting includes instructions on cleaning and storing the MC75A, and provides troubleshooting solutions for potential problems during MC75A operation.•Appendix A, Technical Specifications provides the technical specifications for the MC75A.•Appendix B, Keypads provides keypad layouts and operation.•Appendix C, Voice Quality Manager provides inflammation on using the Voice Quality Manager software.Notational ConventionsThe following conventions are used in this document:•“EDA” refers to the Motorola MC75A series of mobile computers.•Italics are used to highlight the following:•Chapters and sections in this and related documents•Icons on a screen.•Bold text is used to highlight the following:•Dialog box, window, and screen names•Drop-down list and list box names•Check box and radio button names•Key names on a keypad•Button names on a screen.•Bullets (•) indicate:•Action items•Lists of alternatives•Lists of required steps that are not necessarily sequential•Sequential lists (e.g., those that describe step-by-step procedures) appear as numbered lists.Related Documents•MC75A Quick Start Guide, p/n 72-127677-xx.•MC75A Windows Mobile 6 Regulatory Guide, p/n 72-130201-xx.•MC75A Enterprise Digital Assistant Integrator Guide, p/n 72E-133624-xx.•Microsoft® Applications for Mobile 6 User Guide, p/n 72E-108299-xx•Enterprise Mobility Application Guide, p/n 72E-68901-xx•Enterprise Mobility Developer Kits (EMDKs), available at: http://www.motorola.com/enterprisemobility/support.•Latest ActiveSync software, available at: http://www.microsoft.com.For the latest version of this guide and all guides, go to: http://www.motorola.com/enterprisemobility/manuals.DRAFT
xviii MC75A Enterprise Digital Assistant User GuideService InformationIf you have a problem with your equipment, contact Motorola Enterprise Mobility support for your region. Contact information is available at: http://www.motorola.com/enterprisemobility/contactsupport.When contacting Enterprise Mobility support, please have the following information available:•Serial number of the unit•Model number or product name•Software type and version numberMotorola responds to calls by email, telephone or fax within the time limits set forth in support agreements.If your problem cannot be solved by Motorola Enterprise Mobility Support, you may need to return your equipment for servicing and will be given specific directions. Motorola is not responsible for any damages incurred during shipment if the approved shipping container is not used. Shipping the units improperly can possibly void the warranty.If you purchased your Enterprise Mobility business product from a Motorola business partner, contact that business partner for support.DRAFT
Chapter 1 Getting StartedIntroductionThis chapter lists the parts and accessories for the MC75A and explains how to install and charge the batteries, replace the strap, and power on the MC75A for the first time.Figure 1-1 MC75A Front ViewScan/Action ButtonHandstrapKeypad(QWERTY Keypad Shown)Power ButtonI/O ConnectorUp/Down ButtonTouch Screen withProtective OverlayMicrophoneReceiverScan/Decode LEDCharging/Battery Status LEDRadio Status LED (MC75A6/8 only)DRAFT
1 - 2 MC75A Enterprise Digital Assistant User GuideFigure 1-2 MC75A Rear ViewUnpackingCarefully remove all protective material from the MC75A and save the shipping container for later storage and shipping.Verify that you received the following:•MC75A EDA•Lithium-ion battery•Battery cover/strap assembly•Tethered stylus•Protective overlay, installed on display window•Regulatory Guide•Quick Start Guide.Inspect the equipment for damage. If any equipment is missing or damaged, contact the Motorola Enterprise Mobility Support center immediately. See page xviii for contact information.Getting StartedTo start using the MC75A for the first time:•Install the SIM card (MC75A6 only)•Install the main battery.•Charge the MC75A.Battery CoverSpeakerScan Window (Imager Configuration Shown)Headset JackAction ButtonStylusHandstrap SlotHandstrapTether PointScan/Action ButtonMemory Card CoverBattery Cover LatchCameraCamera FlashIrDA WindowDRAFT
Getting Started 1 - 3•Power on the MC75A.•Configure the MC75A.Installing the SIM CardGSM phone service requires a Subscriber Identification Module (SIM) card, or smart card. Obtain this card from the your service provider. The card fits into the MC75A and can contain the following information:•Mobile phone service provider account details.•Information regarding service access and preferences.•Contact information, which can be moved to Contacts on the MC75A.•Any additional services to which you have subscribed.To install the SIM card:1. Slide the SIM cover to unlock.2. Lift the SIM cover using the stylus tip.Figure 1-3 Lifting the SIM Cover3. Insert the SIM card, as shown in Figure 1-4, with the cut edge of the card facing out and the contacts facing down.NOTE MC75A6 configurations only.NOTE For more information about SIM cards, refer to the service provider's documentation.DRAFT
1 - 4 MC75A Enterprise Digital Assistant User GuideFigure 1-4 Inserting the SIM Card4. Lower the SIM cover and using the stylus tip, slide it in place.5. Install the battery. See Installing the Main Battery on page 1-4 for more information.6. After completing initial MC75A setup or after replacing a SIM card:a. Press the red Power button.b. On the Today screen, tap the Antenna icon and select Wireless Manager in the dialog box.c. Ensure Phone is on.d. Press the red Power button to suspend the MC75A.e. Perform a warm boot. See Resetting the MC75A on page 2-17.f. Make a call to verify cellular connection.Installing the Main BatteryTo install the main battery:1. Insert the battery, top first, into the battery compartment in the back of the MC75A.2. Press the battery down into the battery compartment until the battery release latch snaps into place.NOTE For detailed information about WWAN activation and settings, refer to the MC75A Integrator Guide.NOTE The MC75A ships with either a 1950 mAh or a 3600 mAh battery. An optional 4800 mAh battery is available.NOTE Position the battery correctly, with the battery charging contacts on top of the charging contacts in the battery compartment.DRAFT
Getting Started 1 - 5Figure 1-5 Inserting the Battery3. With the battery cover latches open, insert the cover, bottom first, then press down on the top of the cover.4. Close the battery cover latches on either side of the battery cover.5. Insert the handstrap through the handstrap slot, then tighten and press down to secure.Figure 1-6 Inserting the HandstrapThe MC75A powers up after inserting the battery and replacing the battery cover.Charging the BatteryCharging the Main Battery and Memory Backup BatteryBefore using the MC75A for the first time, charge the main battery until the amber Charging/Battery Status LED remains lit (see Table 1-2 on page 1-7 for charge status indications). To charge the MC75A, use a cable or a cradle with the appropriate power supply. For information about the accessories available for the MC75A, see Chapter 7, Accessories.BatteryRelease LatchBattery CoverBattery Cover LatchHandstrap SlotHandstrapCAUTION Ensure that you follow the guidelines for battery safety described in Battery Safety Guidelines on page 8-2.DRAFT
1 - 6 MC75A Enterprise Digital Assistant User GuideThe MC75A is equipped with a memory backup battery which automatically charges from the fully-charged main battery. When using the MC75A for the first time, the backup battery requires approximately 36 hours to fully charge. This is also true any time the backup battery is discharged, which occurs when the main battery is removed for several hours. The backup battery retains RAM data in memory for at least 15 minutes (at room temperature) when the MC75A's main battery is removed. When the MC75A reaches a very low battery state, the combination of main battery and backup battery retains RAM data in memory for at least 48 hours.To charge the main battery, use either a charging cable or a cradle. For cable and cradle setup and charging procedures refer to the MC75A Integrator Guide.•Single Slot USB/Serial Cradle•Four Slot Ethernet Cradle•Four Slot Charge Only Cradle•Vehicle Cradle.To charge the main battery:1. Connect the charging accessory to the appropriate power source.2. Insert the MC75A into a cradle or attach to a cable. The MC75A begins charging. The Charging/Battery Status LED blinks amber while charging, then turns solid amber when fully charged. See Table 1-2 for charging indications.Table 1-1 lists the charge times for each available battery:Figure 1-7 LED IndicatorsTable 1-1 Battery Charge TimesBattery Size Charge Time1950 mAh Changes in less than four hours.3600 mAh Changes in less than eight hours.4800 mAh Changes in less than ten hours.Radio Status LED (MC75A6/8 only)Scan/Decode LEDCharging/Battery Status LEDDRAFT
Getting Started 1 - 7Charging Spare BatteriesSee Chapter 7, Accessories for information on using accessories to change spare batteries.Charging TemperatureCharge batteries in temperatures from 0°C to 40°C (32°F to 104°F). Charging is intelligently controlled by the MC75A.To accomplish this, for small periods of time, the MC75A or accessory alternately enables and disables battery charging to keep the battery at acceptable temperatures. The MC75A or accessory indicates when charging is disabled due to abnormal temperatures via its LED. See Table 1-2.Powering On the MC75APress the Power button to turn on the MC75A. If the MC75A does not power on perform a warm boot. See Resetting the MC75A on page 2-17.When turning the MC75A on for the first time, the splash screen displays for about a minute as the MC75A initializes its flash file system, then the calibration window appears. Note that these windows also appear upon cold boot.Calibrating the ScreenTo calibrate the screen so the cursor on the touch screen aligns with the tip of the stylus:1. Remove the stylus from its holder on the back of the MC75A.2. Tap the screen to begin calibration.3. Carefully press and briefly hold the tip of stylus on the center of each target that appears on the screen.4. Repeat as the target moves around the screen.Table 1-2 LED Charge Indications Charging/BatteryStatus LED IndicationOff MC75A is not charging.MC75A is not inserted correctly in the cradle or connected to a power source.Charger/cradle is not powered.Slow Blinking Amber(1 blink every 2 seconds) MC75A is charging.Solid Amber Charging complete.Note: When the battery is initially inserted in the MC75A, the amber LED flashes once if the battery power is low or the battery is not fully inserted.Fast Blinking Amber(2 blinks/second) Charging error, e.g.:•Temperature is too low or too high.•Charging has gone on too long without completion (typically eight hours).NOTE When the MC75A powers up after inserting a battery for the first time, the device boots and powers on automatically.DRAFT
1 - 8 MC75A Enterprise Digital Assistant User GuideChecking Battery StatusTo check the charge status of the main battery or backup battery in the MC75A, tap Start > Settings > Power icon to display the Power window.To save battery power, tap the Advanced tab and set the MC75A to turn off after a specified number of minutes.Micro Secure Digital (microSD) CardThe microSD card slot provides secondary non-volatile storage. The slot is located on the side of the MC75A (see Figure 1-8). Refer to the documentation provided with the card for more information, and follow the manufacturer’s recommendations for use.To install the microSD card:1. Remove the memory card cover on the side of the MC75A by loosening the two captive screws.Figure 1-8 Card Installation2. Insert the card with the card contacts facing up, until you feel a click.3. Replace the memory card cover and tighten the screws.To remove an microSD card:1. Remove the memory card cover by loosening the two captive screws.Figure 1-9 Card Removal2. Carefully press and release the card to eject it.3. Remove the card from the card slot.4. Replace the memory card cover and tighten the screws.CAUTION Follow proper ESD precautions to avoid damaging the microSD card. Proper ESD precautions include, but are not limited to, working on an ESD mat and ensuring that the operator is properly grounded.DRAFT
Getting Started 1 - 9Adjusting the HandstrapThe MC75A handstrap is attached to the bottom of the battery cover. Adjust the handstrap to increase comfort when holding the MC75A for extended periods of time. To adjust the handstrap:1. Feed the handstrap through the handstrap slot.2. Secure the handstrap by pressing the two sides together as shown in Figure 1-10.Figure 1-10 Handstrap AdjustmentReplacing the Main Battery3. If the MC75A is in suspend mode, press the red Power button to wake the device.4. Press the red Power button to suspend the MC75A.5. Wait for red Decode LED to turn on and then turn off.6. Open the battery cover latches on either side of the battery cover.DRAFT
1 - 10 MC75A Enterprise Digital Assistant User GuideFigure 1-11 Removing the Battery Cover7. Lift the top of the battery cover and remove.8. Press the battery release latch on the bottom of the battery to unlock, and lift the battery out of the well.9. Insert the replacement battery, top first, into the battery compartment in the back of the MC75A.10. Press the battery down into the battery compartment until the battery release latch snaps into place.11. With the battery cover latches open, insert the cover, bottom first, then press down on the top of the cover.12. Close the battery cover latches on either side of the battery cover.13. Press the red Power button to power on the MC75A.Battery Cover LatchNOTE Position the battery correctly, with the battery charging contacts on top of the charging contacts in the battery compartment.DRAFT
Getting Started 1 - 11Battery ManagementObserve the following battery saving tips:•Leave the MC75A connected to AC power at all times when not in use.•Set the MC75A to turn off after a short period of non-use.•Set the backlight to turn off after a short period of non-use.•Turn off all wireless activities when not in use.•Power off the MC75A when charging to charge at a faster rate.•Set IST to turn the display off or to suspend when the MC75A is placed face down.Changing the Power SettingsTo set the MC75A to turn off after a short period of non-use:1. Tap Start > Settings > System tab > Power icon > Advanced tab.2. Select the On battery power: Turn off device if not used for check box and select a value from the drop-down list.3. Select ok.Changing the Backlight SettingsTo change the backlight settings in order to conserve more battery power:1. Tap Start > Settings > System tab > Backlight icon > Battery Power tab.2. Select the Disable backlight if device is not used for check box and select a value from the drop-down list.3. Select the Brightness tab.4. Tap the Disable backlight check box to turn off the display backlight, or use the slider to set a low value for the backlight.5. Select ok.Changing the Keypad Backlight SettingsTo change the keypad backlight settings in order to conserve more battery power:1. Tap Start > Settings > System tab > Keylight icon > Battery Power tab.2. Select the On battery power: Disable keylight if device if not used for check box and select a value from the drop-down list.3. Select the Advanced tab.4. Tap the Disable keylight check box to turn off the keypad backlight.5. Select ok.NOTE The MC75A factory default settings for the WWAN and WLAN radios are set to ON.DRAFT
1 - 12 MC75A Enterprise Digital Assistant User GuideTurning Off the RadiosWindows Mobile 6 devices include Wireless Manager, which provides a simple method of enabling, disabling, and configuring all the device’s wireless capabilities in one place.To open Wireless Manager, tap the Connectivity icon or tap Wireless Manager on the Today screen.Figure 1-12 Opening Wireless ManagerSelect Wireless Manager.Figure 1-13 Wireless Manager WindowTo enable or disable a wireless connection, tap the specific button.To enable or disable all wireless connections, tap the All button.To configure settings for a connection, tap Menu.Connectivity iconNOTE Wireless connection options vary depending upon configurations.DRAFT
Getting Started 1 - 13Figure 1-14 Wireless Manager MenuDRAFT
1 - 14 MC75A Enterprise Digital Assistant User GuideDRAFT
Chapter 2 Using the MC75AIntroductionThis chapter explains the buttons, status icons, and controls on the MC75A, and provides basic instructions for using the MC75A, including powering on and resetting the MC75A, and entering and capturing data.The MC75A factory default radio states are:•Wireless LAN - ON•Bluetooth - OFF•Phone - ON.Home ScreenThe Home contains the Status Bar at the top of the screen, the Today screen in the center and the Soft Keys at the bottom of the screen.Each of these are described below.Figure 2-1 Home ScreenSoft Key BarStatus BarApplications Today ScreenDRAFT
2 - 2 MC75A Enterprise Digital Assistant User GuideStatus BarThe Status Bar at the top of the screen can contain the status icons listed in Table 2-1.Table 2-1 Status IconsIcon DescriptionNotificationsBackup battery low.Notification that one or more instant messages were received.Notification that one or more e-mail/text messages were received.Notification that one or more voice messages were received.Speakerphone is on.There are more notification icons than can be displayed. Tap to display remaining icons.Indicates a reminder of an upcoming calendar event.ConnectivityConnection is active.Connection is not active.Synchronization is occurring.Wi-Fi available.Wi-Fi in use.HSDPA available. (MC75A6)3G available. (MC75A6)GPRS available. (MC75A6)EGPRS available. (MC75A6)1xRTT available. (MC75A8)EVDO Rev. 0 available. (MC75A8)EVDO Rev. A available. (MC75A8)Dormant State - no data transmission during a 1x or EVDO connection. (MC75A8)BatteryAudioWANConnectivityNotificationsDRAFT
Using the MC75A 2 - 3Call missed.WANDialing while no SIM card is installed.Voice call in progress.Calls are forwarded.Call on hold.Antenna/signal icon: wireless on/good signal.Antenna/signal icon: wireless off.Antenna/signal icon: no service or searching.HSDPA connecting. (MC75A6)HSDPA in use. (MC75A6)3G connecting. (MC75A6)3G in use. (MC75A6)GPRS connecting. (MC75A6)GPRS in use. (MC75A6)EGPRS connecting. (MC75A6)EGPRS in use. (MC75A6)EVDO connecting. (MC75A8)EVDO in use. (MC75A8)Roaming.SIM Card not installed. (MC75A6)AudioAll sounds are on.All sounds are off.Vibrate is on.BatteryMain battery is charging.Main battery has a full charge.Main battery has a high charge.Table 2-1 Status Icons (Continued)Icon DescriptionDRAFT
2 - 4 MC75A Enterprise Digital Assistant User GuideToday S creenThe Today screen is scrollable and contains a list of applications and an Information Status bar. The Information Status bar highlights the application that is under it and provides additional information.Touch and hold the screen with your finger and move the Today screen up and down. As the application names move under the Information Status bar, information relevant to that application appears in the bar.Figure 2-2 Moving Today ScreenYou can also touch and hold the Information Status bar and move it up and down over an application name. Remove your finger and the Information Status bar and application name center in the screen.Figure 2-3 Moving Information Status BarMain battery has a medium charge.Main battery has a low charge.Main battery has a very low charge.Table 2-1 Status Icons (Continued)Icon DescriptionDRAFT
Using the MC75A 2 - 5Figure 2-4 Information Bar ExampleTo customize the Today screen, tap Start > Settings > Today icon. Use the Appearance tab to customize the background and the Items tab to change the display format.Classic Today ScreenThe user can change the Today screen to the classic layout that is used in Windows Mobile 6.1.Figure 2-5 Classic Today ScreenTo change to the classic view tap Start > Settings > Today icon > Items tab.Application IconApplication InformationSoft Key BarStatus BarToday ScreenTask TrayDRAFT
2 - 6 MC75A Enterprise Digital Assistant User GuideFigure 2-6 Today Screen SettingsDeselect the Windows Default checkbox and select any of the other checkboxes.Tap OK.The task bar at the bottom of the screen can contain the task tray icons listed in Table 2-2.Soft Keys BarThe Soft Key bar is located at the bottom of the screen and contains two soft key buttons. These buttons display an action and a menu to the user that are context sensitive and can be changed dynamically by an application. For example, in the Contacts list view, the soft keys are New and Menu. As the user begins creating a new contact in edit view, the soft keys change to Done and Menu.NOTE The task bar is only visible in the classic view.Table 2-2 Task Tray IconsIcon Name DescriptionWireless connection status Indicates WLAN signal strength.Bluetooth Enabled Bluetooth radio is on. (Available when StoneStreet One Bluetooth stack is enabled).Bluetooth Disabled Bluetooth radio is off. (Available when StoneStreet One Bluetooth stack is enabled).Bluetooth Connection Bluetooth radio is connected to another Bluetooth device. (Available when StoneStreet One Bluetooth stack is enabled).ActiveSync Active serial connection between the MC75A and the host computer.IST Use to configure the interactive sensing feature.DRAFT
Using the MC75A 2 - 7Start ScreenThe Start screen lists applications and folders available to the user. Table 2-3 lists the default programs and folders listed on the Start screen.Figure 2-7 Start ScreenTable 2-3 Programs and Folders on the Start ScreenIcon Name Description Icon Name DescriptionTodayClose the Start menu and display the Today screen.E-mail Send an Email.Text Send an SMS text message. Contacts Keep track of friends and colleagues.Calendar Keep track of appointments and create meeting requests.Internet Explorer Browse Web and WAP sites as well as download new programs and files from the Internet.Settings Open the Settings folder. See Settings Folder on page 2-10.Pictures & Videos View and manage pictures, animated GIFs, and video files.Getting Started Launch the Getting Started application. Windows Media Play back audio and video files.Messenger Use this mobile version of Windows Live Messenger. Marketplace Purchase applications from the Marketplace.Phone Make and receive calls, switch between calls, and set up conference calling.Microsoft My Phone Synchronizes the MC75A’s contacts, calendar, tasks, text messages, music, photos videos and documents with a Microsoft My Phone account.DRAFT
2 - 8 MC75A Enterprise Digital Assistant User GuideWindows Live Use this mobile version of Windows Live™ to find information on the web.MSN Weather Check the local weather.Games Play games. MSN Money Keep track of your finances.Notes Create handwritten or typed notes, drawings, and voice recordings.Calculator Perform basic arithmetic and calculations, such as addition, subtraction, multiplication, and division.Tasks Keep track of your tasks. File Explorer Organize and manage files on your device.ActiveSync Synchronize information between the MC75A and a host computer or the Exchange Server.Office Mobile Use the complete suite of Microsoft® Office applications for your mobile device.Excel MobileOneNote MobilePowerPoint MobileWord MobileInternet Sharing Connect a notebook computer to the Internet using the MC75A's data connection.Task Manager Enables viewing of memory and CPU allocations and stops running processes. Refer to the Microsoft Applications for Windows Mobile 6 User Guide for more information.Search Phone Search contacts, data, and other information on the MC75A. Refer to the Microsoft Applications for Windows Mobile 6 User Guide for more information.Wireless Companion FolderOpen the Wireless Companion folder.Help See Help topics for the current screen or program. AirBEAM Client Allows specially designed software packages to be transferred between a host server and the MC75A. Refer to the MC75A Integrator Guide for more information.Table 2-3 Programs and Folders on the Start Screen (Continued)Icon Name Description Icon Name DescriptionDRAFT
Using the MC75A 2 - 9BT Information Display information about the Bluetooth radio and generate a Bluetooth address bar code.BTScannerCtlPanel Set com port to use with a Bluetooth scanner.BTExplorer Manages Bluetooth connections using BTExplorer. Only available when the StoneStreet One Bluetooth stack is enabled.Remote Desktop Log onto Windows NT server type computers and use all of the programs that are available on that computer from the MC75A.Modem Link Enables the MC75A to be used as a modem. SMS StagingMSP Agent Interacts with MSP agents to collect monitoring and asset information to enable the configuration, provisioning, monitoring and troubleshooting of the MC75A. Refer to the MC75A Integrator Guide for more information.Rapid Deployment ClientFacilitates software downloads from a Mobility Services Platform Console FTP server to the MC75A. Refer to the MC75A Integrator Guide for more information.SIM Toolkit Manage the contacts that are stored on your SIM card. Copy SIM contents to Contacts on the MC75A.Search Widget Install Microsoft application on the MC75A.DEMO Launches the DEMO applications. This icon appears after the DEMO applications have been installed.Table 2-3 Programs and Folders on the Start Screen (Continued)Icon Name Description Icon Name DescriptionDRAFT
2 - 10 MC75A Enterprise Digital Assistant User GuideSettings FolderTable 2-4 lists the setting applications pre-installed on the MC75A. Tap Start > Settings to open the Settings folder.Table 2-4 Setting Applications in the Setting FolderIcon Name Description Icon Name DescriptionClock & Alarms Set the device clock to the date and time of your locale or to a visiting time zone when you’re traveling. Alarms can also be set at specified days and times of a week.Power Check battery power and set the time-out for turning off the display to conserve battery power.Lock Set a password for the MC75A. Sounds & Notifications Enable sounds for events, notifications, and more, and set the type of notification for different events.Connections FolderContains connection applications (see below).TodayCustomize the appearance of the Today screen and the information to display on it.Personal FolderContains personal applications (see below).Microsoft My PhoneSynchronizes the MC75A’s contacts, calendar, tasks, text messages, music, photos videos and documents with a Microsoft My Phone account.System FolderContains system applications (see below).Connections FolderBeam Set the MC75A to receive incoming IrDA beams. Connections Set up one or more types of modem connections for your device, such as phone dial-up, GPRS, Bluetooth, and more, so that your device can connect to the Internet or a private local network.Bluetooth Open the Bluetooth application, set the MC75A to visible mode and scan for other Bluetooth devices in the area.Domain Enroll Make your device an AD domain member for device management and security. Refer to the Microsoft Applications for Windows Mobile 6 User Guide for more information.DRAFT
Using the MC75A 2 - 11Wi-Fi Setup wireless network connection and customize settings.USB to PC Enables or disables the enhanced network connectivity.Wireless Manager Enables or disables the MC75A’s wireless radios and customizes Wi-Fi, and Bluetooth settings.Personal FolderButtons Assign a program to a button. Owner Information Enter personal information on the MC75A.Input Set options for each of the input methods. Phone Configure phone settings.System FolderAbout View basic information such as the Windows Mobile® version and type of processor used on the MC75A. Certificates See information about certificates installed on the MC75A.Backlight Set the display backlight time-out and adjust brightness.Customer Feedback Submit feedback on the Windows Mobile 6 software.Error Reporting Enable or disable the device's error reporting function. When this function is enabled and a program error occurs, technical data about the state of the program and your computer is logged in a text file and delivered to Microsoft's technical support if you choose to send it.Encryption Allow files on a storage card to be encrypted. Encrypted files are readable only on your device.External GPS Set the appropriate GPS communication ports, if required. You may need to do this when there are programs on the device that access GPS data or you have connected a GPS receiver to the device.HAC Settings Control the phone’s HAC feature.Table 2-4 Setting Applications in the Setting Folder (Continued)Icon Name Description Icon Name DescriptionDRAFT
2 - 12 MC75A Enterprise Digital Assistant User GuideAdjusting VolumeTo adjust the system volume using the Speaker icon in the navigation bar:1. Tap the Speaker icon. The Volume dialog box appears.Figure 2-8 Volume Dialog BoxGPS Setup View GPS SUPL information. IST Settings Set the appropriate setting for configuring the device’s interactive Sensor Technology.Managed Programs Displays the programs that were installed on the MC75A using Mobile Device Manager.Keylight Set the keypad backlight time-out.Memory Check the device memory allocation status and memory card information and stop currently running programs.Regional Settings Set the regional configuration to use, including the format for displaying numbers, currency, date, and time on the MC75A.Phone Info View phone information. Remove Programs Remove programs that you installed on the MC75A.System Info Displays the MC75A’s software and hardware information.Screen Change the screen orientation, re-calibrate the screen, and change the screen text size.Task Manager Stop running programs. Trigger Settings Enables the MC75A to use the Snap-on Trigger Handle.Table 2-4 Setting Applications in the Setting Folder (Continued)Icon Name Description Icon Name DescriptionDRAFT
Using the MC75A 2 - 132. Tap and move the slide bar to adjust the volume.3. Select the On or Off radio button to turn the volume on or off.You can also adjust the system volume using the Sounds & Notifications window, or use the Up/Down button on the side of the MC75A.Battery Status IndicationsBattery icons appear on the navigation bar indicating the battery power level. When the main battery or backup battery power falls below a predetermined level the icon indicates the status and a battery dialog box appears indicating the status of the main or backup battery.Figure 2-9 Battery Status Dialog BoxThe Battery icon always appears in the navigation bar when the Today screen is visible. The icon indicates the battery power level. The message displays until the Dismiss button is pressed.Figure 2-10 Battery Icon on the Title BarAlso view the battery status using the Power window.Battery Reserve OptionsIf the charge of the battery reaches a critical threshold, the MC75A shuts down. This threshold can be changed but affects the amount of time that data can be retained.1. Tap Start > Settings > Power icon > RunTime tab. A warning message appears.DRAFT
2 - 14 MC75A Enterprise Digital Assistant User GuideFigure 2-11 Warning Message2. Read the warning message and tap OK.Figure 2-12 RunTime Tab3. Select one of the Battery Reserve Options.•Option 1: Minimum - After a low battery shutdown, data will be retained for minimum amount of time. Battery should be replaced immediately to avoid data loss.•Option 2: Less - After a low battery shutdown, data will be retained for less than normal amount of time.•Option 3: Normal - After a low battery shutdown, data will be retained for maximum amount of time.4. Tap OK.Main Battery Temperature NotificationsThe temperature notification system implements three levels of notification when the temperature within the battery exceeds specific temperature thresholds:•Level 1: Temperature Watch; this level is similar to main battery low warning. It indicates that the battery temperature has reached the first threshold level. The user should move to an environment within proper operating temperature.•Level 2: Temperature Warning; this level is similar to main battery very low warning. It indicates the battery temperature has reached the second threshold level. The user should stop using the MC75A.DRAFT
Using the MC75A 2 - 15•Level 3: Temperature Error; this level indicates the battery has reached an unusable temperature threshold and immediately suspends the MC75A. This level does not have any graphical notification associated with it.Figure 2-13 Main Battery Temperature Watch Dialog BoxFigure 2-14 Main Battery Temperature Warning Dialog BoxLED IndicatorsThe MC75A has three LED indicators. The Scan/Decode LED indicates status for bar code scanning. The Charging/Battery Status LED indicates battery charging and status. The third LED is application programmable.NOTE The Temperature Warning dialog box remains visible until you tap Hide.DRAFT
2 - 16 MC75A Enterprise Digital Assistant User GuideFigure 2-15 LED IndicatorsTable 2-5 LED IndicationsLED State IndicationScan/Decode LEDSolid Green Successful decode/capture.Solid Red Laser enabled, scanning/imaging in process.Blink Red MC75A is going into suspend mode.Off Not enabled.Charging/Battery Status LEDSlow Blinking Amber Main battery in MC75A is charging.Solid Amber Main battery in MC75A is fully charged.Fast Blinking Amber Charging error.Off Not charging.Single Blink Amber (when Power button pressed) Battery depleted.Blinking Amber (when Power button pressed) Battery over-temperature condition.Radio Status LEDSlow Blinking Green WAN radio is on.Off WAN radio is off.Radio Status LED (MC75A6/8 only)Scan/Decode LEDCharging/Battery Status LEDNOTE For information about scanning/decoding, see Chapter 3, Data Capture. For information about WAN radio status and settings, see Chapter 4, Using the Phone, or refer to the MC75A Enterprise Digital Assistant Integrator Guide.DRAFT

Navigation menu