Symbol Technologies NP4046 WLAN DS Radio Phone User Manual 72 51346 01 indd

Symbol Technologies Inc WLAN DS Radio Phone 72 51346 01 indd

Contents

Regulatory Addenum

Declaration of ConformityBABT, Claremont House, 34 Molesey Road, Walton-on-Thames, KT12 4RQWe, Symbol Technologies Inc. of One Symbol Plaza, Holtsville, NY 11742-1300, USA declare under our sole responsibility that the productTo which this product relates, is in conformity with the following standards and/or othernormative documents.ETS 300 328 (November 1996) Radio; Wideband 2.4GHz Spread SpectrumETS 300 826 (November 1997) EMC: 2.4GHz wideband transmission systemsEN 60950: 1992 Incl Amdt 1-4, 11 - Safety of Information Technology EquipmentWe hereby declare that all essential radio test suites have been carried out andthat the above named product is in conformity to all the essential requirements ofDirective 1999/5/EC.The conformity assessment procedure referred to in Article 10(5) and detailed inAnnex IV of Directive 1999/5/EC has been followed with the involvement of thefollowing Notified Body(ies): Identification mark:0168 The equipment also carries the Class 2 equipment identifier The technical documentation relevant to the above equipment can be made availablefor inspection on application to:Symbol Technologies EMEA, Symbol Place, Winnersh Triangle, Berkshire, RG 41 5TP, UKDornu Narnor Senior Director, Regulatory 7 September 2000(name) (title) (signature of authorised person) (date)Inside North America, contact Symbol at:Symbol Technologies, Inc.One Symbol Plaza, Holtsville, New York 11742-1300 Telephone: 1-516-738-2400/1-800-SCAN 234; Fax: 1-516-738-5990Symbol Support Center: Telephone: 1-800-653-5350; Fax: (516) 563-5410; Email: support@symbol.comInternational ContactsOutside North America, contact Symbol at:Symbol Technologies Technical Support12 Oaklands Park; Berkshire, RG41 2FD, United KingdomTel: 011-44-118-945-7000 or 1-516-738-2400 ext. 6213 Customer SupportNorth American ContactsSymbol Technologies is committed to providing its customers with world-class customerservice and technical support. The Symbol Support Center operates as the single point of contact for any technical problem, question or support issue.The Support Center operates all year, 24 hours a day, staffed by full-time professionalTechnical Specialists.If Symbol cannot solve the problem immediately within its tiered, technical-support center,access to all technical disciplines within Symbol become available for further assistance email, fax or telephone.and support. F. Responses byirst response/contact within 24 hours or one business dayNetVision DP-4046, 11 Mbps Radio IP Communicator with Barcode readerNetVision NV-4046, 11 Mbps Radio IP Communicator Declaration of ConformityBABT, Claremont House, 34 Molesey Road, Walton-on-Thames, KT12 4RQWe, Symbol Technologies Inc. of One Symbol Plaza, Holtsville, NY 11742-1300, USA declare under our sole responsibility that the productTo which this product relates, is in conformity with the following standards and/or othernormative documents.ETS 300 328 (November 1996) Radio; Wideband 2.4GHz Spread SpectrumETS 300 826 (November 1997) EMC: 2.4GHz wideband transmission systemsEN 60950: 1992 Incl Amdt 1-4, 11 - Safety of Information Technology EquipmentWe hereby declare that all essential radio test suites have been carried out andthat the above named product is in conformity to all the essential requirements ofDirective 1999/5/EC.The conformity assessment procedure referred to in Article 10(5) and detailed inAnnex IV of Directive 1999/5/EC has been followed with the involvement of thefollowing Notified Body(ies): Identification mark:0168 The equipment also carries the Class 2 equipment identifier The technical documentation relevant to the above equipment can be made availablefor inspection on application to:Symbol Technologies EMEA, Symbol Place, Winnersh Triangle, Berkshire, RG 41 5TP, UKDornu Narnor Senior Director, Regulatory 7 September 2000(name) (title) (signature of authorised person) (date)Inside North America, contact Symbol at:Symbol Technologies, Inc.One Symbol Plaza, Holtsville, New York 11742-1300 Telephone: 1-516-738-2400/1-800-SCAN 234; Fax: 1-516-738-5990Symbol Support Center: Telephone: 1-800-653-5350; Fax: (516) 563-5410; Email: support@symbol.comInternational ContactsOutside North America, contact Symbol at:Symbol Technologies Technical Support12 Oaklands Park; Berkshire, RG41 2FD, United KingdomTel: 011-44-118-945-7000 or 1-516-738-2400 ext. 6213 Customer SupportNorth American ContactsSymbol Technologies is committed to providing its customers with world-class customerservice and technical support. The Symbol Support Center operates as the single point of contact for any technical problem, question or support issue.The Support Center operates all year, 24 hours a day, staffed by full-time professionalTechnical Specialists.If Symbol cannot solve the problem immediately within its tiered, technical-support center,access to all technical disciplines within Symbol become available for further assistance email, fax or telephone.and support. F. Responses byirst response/contact within 24 hours or one business dayNetVision DP-4046, 11 Mbps Radio IP Communicator with Barcode readerNetVision NV-4046, 11 Mbps Radio IP Communicator
Regulatory ComplianceSymbol RF products are designed to be compliant with the rules and regulations in the locations into which they are sold and will be labeled as required.The majority of Symbol RF devices are type approved and do not require the user to obtain license or authorization before using the equipment. Any changes or modificationto Symbol Technologies equipment not expressly approved by Symbol Technologiescould void the user authority to operate the equipment.Radio Frequency Interference RequirementsThis device has been tested and found to comply with the limits for a Class A digitaldevice pursuant to Part 15 of the Federal Communications Commissions Rules and Regulation. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. However, there is no guarantee that interference will not occur in a particular installation.If the equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user is encouragedto try to correct the interference by one or more of the following measures:• Re-orient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that which the receiver is connected.Radio Frequency Interference Requirements - CanadaThis Class A digital apparatus meets the requirements of the CanadianInterference-Causing Equipment Regulations.Cet appareil numérique de la Classe A respecte toutes les exigences du Reglement sur le Materiél Brouilleur du Canada. The FCC has granted an Equipment Authorization for these model phones with all reported SAR levels evaluated as in compliance with the FCC RF emission guidelines. SAR information on these model phones is on file wdith the FCC and can be found under the Display Grant section of http://www.fcc.gove/oet/fccid.European Economic AreaThe European variant is intended for use throughout the European Economic area,however authorization for use restricted as follows:• European standards dictate maximum radiated transmit power of 100 mW EIRP and frequency range 2.400 - 2.4835 GHz.• France, the equipment is to be restricted to the 2.4465 - 2.4835 GHz frequency range. • Belgium outside, the equipment is to be restricted to the 2.460 -2.4835 GHz frequency range• Operation in Italy requires a user license.*72-51346-01*72-51346-01Revision ARegulatory ComplianceSymbol RF products are designed to be compliant with the rules and regulations in the locations into which they are sold and will be labeled as required.The majority of Symbol RF devices are type approved and do not require the user to obtain license or authorization before using the equipment. Any changes or modificationto Symbol Technologies equipment not expressly approved by Symbol Technologiescould void the user authority to operate the equipment.Radio Frequency Interference RequirementsThis device has been tested and found to comply with the limits for a Class A digitaldevice pursuant to Part 15 of the Federal Communications Commissions Rules and Regulation. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. However, there is no guarantee that interference will not occur in a particular installation.If the equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user is encouragedto try to correct the interference by one or more of the following measures:• Re-orient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that which the receiver is connected.Radio Frequency Interference Requirements - CanadaThis Class A digital apparatus meets the requirements of the CanadianInterference-Causing Equipment Regulations.Cet appareil numérique de la Classe A respecte toutes les exigences du Reglement sur le Materiél Brouilleur du Canada. The FCC has granted an Equipment Authorization for these model phones with all reported SAR levels evaluated as in compliance with the FCC RF emission guidelines. SAR information on these model phones is on file wdith the FCC and can be found under the Display Grant section of http://www.fcc.gove/oet/fccid.European Economic AreaThe European variant is intended for use throughout the European Economic area,however authorization for use restricted as follows:• European standards dictate maximum radiated transmit power of 100 mW EIRP and frequency range 2.400 - 2.4835 GHz.• France, the equipment is to be restricted to the 2.4465 - 2.4835 GHz frequency range. • Belgium outside, the equipment is to be restricted to the 2.460 -2.4835 GHz frequency range• Operation in Italy requires a user license.*72-51346-01*72-51346-01Revision A

Navigation menu