Symbol Technologies NP4046 WLAN DS Radio Phone User Manual 72 51346 01 indd
Symbol Technologies Inc WLAN DS Radio Phone 72 51346 01 indd
Contents
- 1. Quick Reg Guide NP4046
- 2. Regulatory Addenum
Regulatory Addenum
Declaration of Conformity
BABT, Claremont House, 34 Molesey Road, W
alton-
on-
Thames, K
T12 4RQ
We
, Symbol T
echnologies Inc. of One Symbol Plaza, Holtsville, NY 11742-1300, USA
declare under our sole responsibility that the product
To
which this product relates, is in conformity with the following standards and/or other
normative documents
.
ETS 300 328 (November 1996) Radio; Wideband 2.4GHz Spread Spectrum
ETS 300 826 (November 1997) EMC: 2.4GHz wideband transmission systems
EN 60950: 1992 Incl Amdt 1-4, 11 - Safety of Information Technology Equipment
We hereby declare that all essential radio test suites have been carried out and
that the above named product is in conformity to all the essential requirements of
Directive 1999/5/EC
.
The conformity assessment procedure referred to in Article 10(5) and detailed in
Annex IV of Directive 1999/5/EC has been followed with the involvement of the
following Notified Body(ies)
:
Identification mark
:
0168 The equipment also carries the Class 2 equipment identifier
The technical documentation relevant to the above equipment can be made availabl
e
for inspection on application to
:
Symbol T
echnologies EMEA
, Symbol Place, Winnersh T
riangle, Berkshire, RG 41 5TP
, U
K
Dornu Narnor Senior Director
, Regulatory
7 September 2000
(name) (title)
(signature of authorised person) (date)
Inside North America, contact Symbol at:
Symbol Technologies, Inc.
One Symbol Plaza, Holtsville, New Y
ork 11742-1300
Telephone: 1-516-738-2400/1-800-SCAN 234; Fax: 1-516-738-5990
Symbol Support Center:
Telephone: 1-800-653-5350; Fax: (516) 563-5410; Email: support@symbol.com
International Contacts
Outside North America, contact Symbol at:
Symbol Technologies Technical Suppor
t
12 Oaklands Park; Berkshire, RG41 2FD, United Kingdom
Te
l: 011-44-118-945-7000 or 1-516-738-2400 ext. 6213
Customer Support
North American Contacts
Symbol T
echnologies is committed to providing its customers with world
-c
lass customer
service and technical support. The Symbol Support Center operates as the single point of
contact for any technical problem, question or support issue.
The Support Center operates all year
, 24 hours a day
, staffed by full-time professional
T
echnical Specialists.
If Symbol cannot solve the problem immediately within its tiered, technical-
support center,
access to all technical disciplines within Symbol become available for further assistance
email, fax or telephone
.
and support. F
. Responses by
irst response/contact within 24 hours or one business day
NetVision DP-4046, 11 Mbps Radio IP Communicator with Barcode reader
NetVision NV-4046, 11 Mbps Radio IP Communicator
Declaration of Conformity
BABT
, Claremont House, 34 Molesey Road, Walton-
on-
Thames, K
T12 4RQ
We
, Symbol T
echnologies Inc. of One Symbol Plaza, Holtsville, NY 11742-1300, USA
declare under our sole responsibility that the produc
t
To
which this product relates, is in conformity with the following standards and/or other
normative documents.
ETS 300 328 (November 1996) Radio; Wideband 2.4GHz Spread Spectrum
ETS 300 826 (November 1997) EMC: 2.4GHz wideband transmission systems
EN 60950: 1992 Incl Amdt 1-4, 11 - Safety of Information Technology Equipment
We
hereby declare that all essential radio test suites have been carried out and
that the above named product is in conformity to all the essential requirements of
Directive 1999/5/EC
.
The conformity assessment procedure referred to in Article 10(5) and detailed in
Annex IV of Directive 1999/5/EC has been followed with the involvement of the
following Notified Body(ies):
Identification mark
:
0168 The equipment also carries the Class 2 equipment identifier
The technical documentation relevant to the above equipment can be made availabl
e
for inspection on application to
:
Symbol T
echnologies EMEA
, Symbol Place, Winnersh T
riangle, Berkshire, RG 41 5TP
, U
K
Dornu Narnor Senior Director
, Regulatory
7 September 2000
(name) (title)
(signature of authorised person) (date)
Inside North America, contact Symbol at:
Symbol Technologies, Inc.
One Symbol Plaza, Holtsville, New Y
ork 11742-1300
Telephone: 1-516-738-2400/1-800-SCAN 234; Fax: 1-516-738-5990
Symbol Support Center:
Telephone: 1-800-653-5350; Fax: (516) 563-5410; Email: support@symbol.com
International Contacts
Outside North America, contact Symbol at:
Symbol Technologies Technical Suppor
t
12 Oaklands Park; Berkshire, RG41 2FD, United Kingdom
Tel: 011-44-118-945-7000 or 1-516-738-2400 ext. 6213
Customer Support
North American Contacts
Symbol T
echnologies is committed to providing its customers with world
-c
lass customer
service and technical support. The Symbol Support Center operates as the single point of
contact for any technical problem, question or support issue.
The Support Center operates all year
, 24 hours a day
, staffed by full-time professional
T
echnical Specialists.
If Symbol cannot solve the problem immediately within its tiered, technical-
support center,
access to all technical disciplines within Symbol become available for further assistance
email, fax or telephone
.
and support. F
. Responses by
irst response/contact within 24 hours or one business day
NetVision DP-4046, 11 Mbps Radio IP Communicator with Barcode reader
NetVision NV-4046, 11 Mbps Radio IP Communicator
Regulatory Compliance
Symbol RF products are designed to be compliant with the rules and regulations
in the locations into which they are sold and will be labeled as required.
The majority of Symbol RF devices are type approved and do not require the user to
obtain license or authorization before using the equipment. Any changes or modification
to Symbol Technologies equipment not expressly approved by Symbol Technologies
could void the user authority to operate the equipment.
Radio Frequency Interference Requirements
This device has been tested and found to comply with the limits for a Class A digital
device pursuant to Part 15 of the Federal Communications Commissions Rules
and Regulation. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user
will be required to correct the interference at his own expense. However, there
is no guarantee that interference will not occur in a particular installation.
If the equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
• Re-orient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that which the receiver is connected.
Radio Frequency Interference Requirements - Canada
This Class A digital apparatus meets the requirements of the Canadian
Interference-Causing Equipment Regulations.
Cet appareil numérique de la Classe A respecte toutes les exigences du
Reglement sur le Materiél Brouilleur du Canada.
The FCC has granted an Equipment Authorization for these model phones with
all reported SAR levels evaluated as in compliance with the FCC RF emission
guidelines. SAR information on these model phones is on file wdith the FCC and
can be found under the Display Grant section of http://www.fcc.gove/oet/fccid.
European Economic Area
The European variant is intended for use throughout the European Economic area,
however authorization for use restricted as follows:
• European standards dictate maximum radiated transmit power of 100 mW
EIRP and frequency range 2.400 - 2.4835 GHz.
• France, the equipment is to be restricted to the 2.4465 - 2.4835 GHz
frequency range.
• Belgium outside, the equipment is to be restricted to the 2.460 -2.4835 GHz
frequency range
• Operation in Italy requires a user license.
*72-51346-01*
72-51346-01
Revision A
Regulatory Compliance
Symbol RF products are designed to be compliant with the rules and regulations
in the locations into which they are sold and will be labeled as required.
The majority of Symbol RF devices are type approved and do not require the user to
obtain license or authorization before using the equipment. Any changes or modification
to Symbol Technologies equipment not expressly approved by Symbol Technologies
could void the user authority to operate the equipment.
Radio Frequency Interference Requirements
This device has been tested and found to comply with the limits for a Class A digital
device pursuant to Part 15 of the Federal Communications Commissions Rules
and Regulation. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user
will be required to correct the interference at his own expense. However, there
is no guarantee that interference will not occur in a particular installation.
If the equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
• Re-orient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that which the receiver is connected.
Radio Frequency Interference Requirements - Canada
This Class A digital apparatus meets the requirements of the Canadian
Interference-Causing Equipment Regulations.
Cet appareil numérique de la Classe A respecte toutes les exigences du
Reglement sur le Materiél Brouilleur du Canada.
The FCC has granted an Equipment Authorization for these model phones with
all reported SAR levels evaluated as in compliance with the FCC RF emission
guidelines. SAR information on these model phones is on file wdith the FCC and
can be found under the Display Grant section of http://www.fcc.gove/oet/fccid.
European Economic Area
The European variant is intended for use throughout the European Economic area,
however authorization for use restricted as follows:
• European standards dictate maximum radiated transmit power of 100 mW
EIRP and frequency range 2.400 - 2.4835 GHz.
• France, the equipment is to be restricted to the 2.4465 - 2.4835 GHz
frequency range.
• Belgium outside, the equipment is to be restricted to the 2.460 -2.4835 GHz
frequency range
• Operation in Italy requires a user license.
*72-51346-01*
72-51346-01
Revision A