Symbol Technologies PDT7533 PDT7533 Portable Data Terminal User Manual 72 38888 02a

Download:
Mirror Download [FCC.gov]
Document ID	109563
Application ID	KXYXWYukKQrqQr/HcWYg1Q==
Document Description	users manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	37.28kB (465972 bits)
Date Submitted	2000-07-17 00:00:00
Date Available	2000-09-11 00:00:00
Creation Date	2000-07-06 17:41:40
Producing Software	Acrobat Distiller 4.05 for Windows
Document Lastmod	2000-07-06 17:42:01
Document Title	72-38888-02a.fm
Document Creator	FrameMaker 5.5.6p145
Document Author:	califano

PR
EL
IM
IN
P D T
7 5 0 0
S e r i e s
IN
 1999-2000 SYMBOL TECHNOLOGIES, INC. All rights reserved.
Symbol reserves the right to make changes to any product to improve reliability,
function, or design.
Symbol does not assume any product liability arising out of, or in connection with, the
application or use of any product, circuit, or application described herein.
No license is granted, either expressly or by implication, estoppel, or otherwise under
any patent right or patent, covering or relating to any combination, system, apparatus,
machine, material, method, or process in which Symbol products might be used. An
implied license only exists for equipment, circuits, and subsystems contained in Symbol
products.
Symbol is a registered trademark of Symbol Technologies, Inc. Other product names
mentioned in this manual may be trademarks or registered trademarks of their
respective companies and are hereby acknowledged.
Symbol Technologies, Inc.
One Symbol Plaza
Holtsville, N.Y. 11742-1300
http://www.symbol.com
PR
EL
IM
Patents
This product is covered by one or more of the following U.S. and foreign Patents:
U.S. Patent No.4,387,297; 4,460,120; 4,496,831; 4,593,186; 4,603,262; 4,607,156;
4,652,750; 4,673,805; 4,736,095; 4,758,717; 4,816,660; 4,845,350; 4,896,026;
4,897,532; 4,923,281; 4,933,538; 4,992,717; 5,015,833; 5,017,765; 5,021,641;
5,029,183; 5,047,617; 5,103,461; 5,113,445; 5,130,520; 5,140,144; 5,142,550;
5,149,950; 5,157,687; 5,168,148; 5,168,149; 5,180,904; 5,216,232; 5,229,591;
5,230,088; 5,235,167; 5,243,655; 5,247,162; 5,250,791; 5,250,792; 5,260,553;
5,262,627; 5,262,628; 5,266,787; 5,278,398; 5,280,162; 5,280,163; 5,280,164;
5,280,498; 5,304,786; 5,304,788; 5,306,900; 5,321,246; 5,324,924; 5,337,361;
5,367,151; 5,373,148; 5,378,882; 5,396,053; 5,396,055; 5,399,846; 5,408,081;
5,410,139; 5,410,140; 5,412,198; 5,418,812; 5,420,411; 5,436,440; 5,444,231;
5,449,891; 5,449,893; 5,468,949; 5,471,042; 5,478,998; 5,479,000; 5,479,002;
5,479,441; 5,504,322; 5,519,577; 5,528,621; 5,532,469; 5,543,610; 5,545,889;
5,552,592; 5,557,093; 5,578,810; 5,581,070; 5,589,679; 5,589,680; 5,608,202;
5,612,531; 5,619,028; 5,627,359; 5,637,852;5,664,229; 5,668,803; 5,675,139;
5,693,929; 5,698,835; 5,705,800; 5,714,746; 5,723,851; 5,734,152; 5,734,153;
5,742,043; 5,745,794; 5,754,587; 5,762,516; 5,763,863; 5,767,500; 5,789,728;
5,789,731; 5,808,287; 5,811,785; 5,811,787; 5,815,811; 5,821,519; 5,821,520;
5,823,812; 5,828,050; 5,850,078; 5,861,615; 5,874,720; 5,875,415; 5,900,617;
5,902,989; 5,907,146; 5,912,450; 5,914,478; 5,917,173; 5,920,059; 5,923,025;
5,929,420; 5,945,658; 5,945,659; 5,946,194; 5,959,285; 6,002,918;D305,885;
D341,584; D344,501; D359,483; D362,453; D363,700; D363,918; D370,478;
D383,124; D391,250; D405,077; D406,581; D414,171; D414,172, D419,548.
Invention No. 55,358; 62,539; 69,060; 69,187 (Taiwan); No. 1,601,796; 1,907,875;
1,955,269 (Japan).
European Patent 367,299; 414,281; 367,300; 367,298; UK 2,072,832; France 81/
03938; Italy 1,138,713.
rev. 03/00
Q u i c k
R e f e r e n c e
Introduction
The PDT 7500 Series family of portable data terminals puts the
processing power of a 486 PC in the user’s hand. The terminal uses
a rechargeable Lithium-Ion 1400 mAh smart battery, and
incorporates pen technology and bar code scanning capability in a
key-based terminal.
The PDT 7500 ruggedized hand-held terminal combines:
PR
EL
•
•
•
•
IN
•
PC-standard architecture (32-bit 486 DX2)
Microsoft® MS-DOS 6.22 or Windows® CE OS
Wireless communication capability using Symbol’s wireless
LAN technology
An optional integrated Wireless Wide Area Network
(WWAN) cellular radio
Integrated laser scanning capability (1- and 2-Dimensional)
35-key keypad for key input
Touch screen
IrDA-compliant interface for printing and communications.
IM
•
•
•
P D T
7 5 0 0
S e r i e s
About This Guide
Parts of the PDT 7500 on page 3
Installing New or Recharged Batteries on page 5
Operating the PDT 7500 on page 8
Using the PDT 7500 Keypad on page 11
Using the Integrated Laser Scanner on page 12
Host Communications on page 15
Using the Touch Screen on page 16
Troubleshooting on page 16.
IN
•
•
•
•
•
•
•
•
This guide provides information on the operation of the PDT 7500
Series terminal. Specifically, the following topics are discussed:
Accessories
EL
Additional Li-Ion battery
Stylus for performing pen functions
Single-slot cradle
Four-slot cradle
Vehicle cradle
IrDA compliant printer
UBC 2000 charging adapter
Null modem cable
Holster.
PR
•
•
•
•
•
•
•
•
•
IM
Each PDT 7500 requires one 1400 mAh Li-Ion battery (p/n 2138602-06). The following optional accessories are available from
Symbol Technologies:
Q u i c k
R e f e r e n c e
Parts of the PDT 7500
Scan LED
Front View
LCD
Scan Button
Thumb Rest
Power Key
Top View
PR
EL
IM
IN
Communication LED
Battery Charge
LED
Scan Window
P D T
7 5 0 0
S e r i e s
Parts of the PDT 7500 (continued)
Bottom View
Serial
Communications
Port
EL
IM
IN
Back View
IrDA Port
PR
Li-Ion Battery
Battery Latch
Q u i c k
R e f e r e n c e
Installing New or Recharged Batteries
To ensure proper terminal operation, use ONLY the
Symbol Li-Ion battery in the PDT 7500.
To install a new or recharged Li-Ion battery:
Caution:
IM
IN
1. Hook the base of the new battery in the top of the battery
compartment, then press the into place.
EL
2. Slide the battery latch to secure the battery.
If the battery latch is not closed, do not operate the terminal,
otherwise data may be lost.
PR
Caution:
Do not expose the battery to temperatures in excess of
140°F (60°C). Do not disassemble, incinerate, or short
circuit the battery.
P D T
7 5 0 0
S e r i e s
Removing the Battery from the Terminal
To remove the Li-Ion battery from the terminal:
1. Suspend the terminal’s power.
IM
IN
2. Slide the battery release switch towards the top of the terminal
until the lock releases.
PR
EL
3. Lift the battery up and out of the battery compartment.
Charging the Battery in the Terminal
To charge the terminal’s battery, place the PDT 7500 in the cradle
or connect the synchronization/charging cable.
The terminal’s charging LED turns yellow while charging, then
turns green when the battery is fully charged, which takes 2-3
hours. A flashing yellow LED indicates there may be a problem with
the battery.
Q u i c k
R e f e r e n c e
For instructions on setting up the cradle, refer to the Quick
Reference Guide that shipped with your cradle or to the PDT 7500
Series Product Reference Guide (72-39225-xx for DOS terminals,
or 72-41235-xx for Windows CE Terminals).
Charging the Spare Battery
IN
The cradle also has a spare battery charging slot. To charge the
spare Li-Ion battery in the CRD 7500 cradle, place the battery into
the charging slot in the cradle. Charging begins automatically and
the charge LED on the cradle turns yellow. The charge LED turns
green upon successful completion of the charge cycle, which takes
approximately 4 hours. If the LED does not light, no battery is
present. If the LED blinks yellow, the battery is faulty.
IM
You may also charge the battery in the UBC 2000 Battery Charger.
See the Quick Reference Guide which came with the UBC 2000 for
more information.
LED Indication
EL
For all charging methods, the terminal’s battery charging LED
indicates the battery charging status, as follows:
Battery Charge State
Charge LED Indication
Battery absent/no charge power
Off
Battery charging
Yellow
Green
Abnormal battery
Flashing Yellow
PR
Battery fully charged
P D T
7 5 0 0
S e r i e s
Operating the PDT 7500
Powering the Terminal On/Off
Before the terminal can be powered on, it must be initialized and the battery must be fully charged. Refer to
the PDT 7500 Series Product Reference Guide for your
terminal for information on initializing the terminal.
Note:
To power on the terminal:
1. Make sure the terminal’s battery is fully charged.
IN
2. Press the PWR key.
To suspend the terminal’s operation, press the PWR key.
Turning the Backlight On/Off
IM
To turn the backlight on or off, press the blue FUNC key, then the
LAMP key.
Controlling the Screen Contrast
EL
To lighten the screen contrast, press the blue FUNC key, then the
LIGHT key. To darken the screen contrast, press the FUNC key,
then the DARK Key.
Resetting the PDT 7500
PR
If your PDT 7500 Series terminal stops responding to input from
buttons on the screen, you must reset it.
Performing a Warm Boot (DOS and Windows CE Terminals)
A warm boot restarts the terminal and saves all stored records and
entries.
Note:
Files that remain open during a warm boot may not be
retained.
To perform a warm boot, press and hold down the PWR key for 6
seconds, then release.
Q u i c k
R e f e r e n c e
Performing a Cold Boot (DOS and Windows CE Terminals)
A cold boot restarts the terminal. In the Windows CE environment,
the registry and objects stored are reset to original settings.
To perform a cold boot, press and hold the PWR key for 15 seconds,
then release. On the DOS terminal, this value can be reconfigured
in Setup (see the Product Reference Guide for more information).
Performing a Hard Reset (Windows CE Terminals Only)
On the Windows CE terminal, you can restore any data
previously synchronized with your computer during the
next ActiveSync operation. See the Quick Reference
Guide which came with your cradle, or the PDT 7500
Product Reference Guide for Windows CE for more information.
IM
Note:
IN
A hard reset also restarts the PDT 7500 Series terminal, but erases
all stored records and entries. Therefore, never perform a hard reset
unless a warm/cold boot does not solve your problem.
EL
To perform a hard reset:
1. Remove the battery for 20 minutes or longer.
2. Replace the battery in the terminal.
3. The calibration screen displays.
PR
Note:
With a hard reset, formats preferences and other settings
are restored to their original factory defaults.
Calibrating the Screen (Windows CE Terminals Only)
The first time you start your PDT 7500 terminal (and whenever the
terminal is cold-booted), the calibration screen displays. This
section describes how to calibrate your terminal so the cursor on the
touch screen aligns with the tip of your stylus.
Note:
If your terminal came loaded with another software application, the calibration screen may not display.
P D T
7 5 0 0
S e r i e s
To calibrate your PDT 7500 terminal:
1. If necessary, adjust the contrast on the PDT 7500 so the screen
is clear and readable. See “Controlling the Screen Contrast”
on page 8 for instructions.
IM
IN
2. As the screen instructs, carefully press and briefly hold the stylus on the center of each target. Repeat as the target moves
around the screen.
PR
EL
3. Tap the screen when prompted to accept new calibration.
10
Q u i c k
R e f e r e n c e
Using the PDT 7500 Keypad
The PDT 7500 uses an alphanumeric keypad that produces the 26character alphabet (A-Z), numbers (0-9), and assorted characters.
The keypad is color-coded to indicate which modifier key (ALPHA,
CTRL, FUNC, and SHIFT) to press to produce a particular
character or action.
Alpha key
Function key
Control key
IM
Enter key
IN
Shift key
EL
Power key
•
•
•
•
•
•
Backspace key
Space key
The default numeric keypad produces the numbers 0-9.
Press ALPHA and the appropriate key to produce the alpha
characters A-Z.
Press FUNC (blue) and the corresponding numeric key to produce the function keys F1-F10.
Press the cursor keys ( , , , ) to move the cursor left,
right, up and down on the screen.
Press BKSP to erase information entered on the display, one
character at a time.
Press SPACE to enter a blank space.
Press CLEAR to partially or completely escape from an application level or screen. CLEAR also erases all entered data
from the screen.
PR
•
Clear key
11
P D T
7 5 0 0
S e r i e s
Press ENTER after entering data or a command.
Press CTRL to perform the control function. This key is under application control.
• Press SHIFT and a key to produce various character keys; refer
to the PDT 7500 Series Product Reference Guide for your terminal or your application guide for the keypad mapping.
Note: Key function can be changed by an application. Your
keypad may not function exactly as described above.
•
•
To use the laser scanner:
IN
Using the Integrated Laser Scanner
1. Verify the system is on. The LED lights yellow if scanning is
enabled and the laser is on.
IM
2. Aim the PDT 7500 scan window at the bar code and press the
scan button.
EL
Do not hold the PDT 7500 at a right angle to the bar code.
You can tilt the 7500 up to 65° forward or backward and
achieve a successful decode.
3. Ensure that the scan beam crosses all bars and spaces on the
symbol, as shown below.
Right
PR
Wrong
Hold the scanner farther away for larger symbols, and closer
for symbols with bars that are close together.
4. The LED turns from yellow to green for successful decodes.
The PDT 7500 may also beep on successful decode.
12
Q u i c k
R e f e r e n c e
Scanning PDF417 Bar Codes
The PDF417 bar code symbol has multiple rows, but the raster
pattern also has multiple scanning rows. Two basic steps are
required as you scan:
IN
Slab Raster
1. Point the scanner at the bar code and press the scan button.
EL
IM
2. As the raster pattern spreads, keep the pattern in the same horizontal plane as the bar code.
3/4”
3/4”
PR
3. The terminal indicates a successful scan by changing the LED
from yellow to green, beeping one or more times, and/or displaying the decoded bar code on the screen.
“Tall” PDF Bar Codes
If the PDF417 symbol is “tall,” the vertical scan pattern may not be
high enough to cover it.
In this case, try a slow “up and down” scanning motion. With the
raster pattern open, try to move the scanner slowly down toward
the bottom of the symbol, keeping the beam horizontal to the rows,
and then slowly back upward toward the top.
13
7 5 0 0
S e r i e s
IN
P D T
PR
EL
IM
The scan beam does not have to be perfectly parallel with the top
and bottom of the symbol (up to a 4o tilt will work).
14
Q u i c k
R e f e r e n c e
Host Communications
Using the RS-232 Serial Cable
The PDT 7500 Series terminal can communicate with a host PC
either directly through its communications port using an RS-232
serial cable or the cradle, or wirelessly via the Spectrum24® wireless
LANs. For more information on setting up and performing wireless
communications with your PDT 7540 terminal, refer to the PDT
7500 Series Product Reference Guide.
To connect the RS-232 serial cable for host communication:
IN
1. Connect the RS-232 serial communication cable’s connector
to the adapter cable’s connector.
2. Plug the adapter cable’s subminiature connector into the serial
communication port on the bottom of the terminal.
IM
3. Plug the other end of the RS-232 serial communication cable
into the host PC.
4. Begin host communication as specified by your application.
EL
Using the Cradle
To communicate through the cradle:
PR
1. Make sure all connections between the cradle and the host
computer are secure. See the Quick Reference Guide that
shipped with your cradle for instructions on setting up the cradle.
2. Power on the host computer, the cradle, and the terminal.
3. Insert the terminal into the cradle.
4. Begin host communications as specified by your application.
15
P D T
7 5 0 0
S e r i e s
Communicating with Printers
Using the Touch Screen
The PDT 7500 communicates with IrDA-compliant peripherals
through the IrDA interface in the base of the terminal. To print,
point the PDT 7500’s IrDA port at the IrDA port on the IrDAcompliant printer from a maximum distance of 39 inches (1 meter)
and run the application’s print function. Printer communication can
also be established through an RS-232 cable connected directly to
the printer.
IM
IN
Some PDT 7500 terminals are equipped with a Touch Screen, which
has software that allows the stylus to function as a mouse. An
optional stylus is available from Symbol for use with the terminal.
Further use of the stylus function is application-dependent. Refer to
application documentation for more information.
Troubleshooting
Cause
EL
Problem
PR
PDT 7500 does
not power on.
Rechargeable
Li-Ion battery
did not charge.
Solution
Li-Ion battery
not charged.
Charge or replace the Li-Ion
battery in the PDT 7500.
System crash.
Hold PWR key for 15 seconds.
DOS terminal users may change
this value in Setup.
Battery failed.
Replace battery.
PDT 7500 removed from cradle while battery
was charging.
Insert PDT 7500 in cradle and
begin charging. The Li-Ion battery requires 2-3 hours to recharge fully.
16
Q u i c k
Problem
Cause
Solution
Press the PWR key.
Contrast not adjusted properly.
Press the blue FUNC key and
then the Dark or Light keys to
adjust contrast.
Scanner does
not power on
when the scan
button is
pressed.
Scanner is not
enabled.
See your System Administrator.
Scanner does
not decode a
bar code.
Bar code is unreadable.
Verify that the bar code is not
defective, i.e., smudged or broken.
Scan window is
dirty.
Clean scan window with a lens
tissue. Tissues for eyeglasses
work well. Do not use tissues
coated with lotion.
IM
IN
PDT 7500 not
powered on.
EL
Cannot see
characters on
display.
R e f e r e n c e
See your System Administrator.
PR
Scan code not
enabled.
17
P D T
Cause
Solution
Bring the terminal closer to the
printer and attempt communications again.
Obstruction interfered with
communication.
Check the path to ensure no objects were in the way.
Application is
not enabled to
run IrDA printing.
Printer support must be included with the application to run
IrDA printing on the terminal.
See your System Administrator.
Distance from
printer is more
than 1 meter
(3.28 feet).
PR
EL
IM
IN
Fail to communicate with
IrDA printer.
S e r i e s
Problem
7 5 0 0
18
Q u i c k
R e f e r e n c e
GND
DSR
RXD
CTS
DCD
GND
IN
Description
Pin
Pin-Outs
PWROUT (+5V)
PWRIN(+15V)
10
11
EL
12
DTR
IM
Ring
TXD
RTS
Reserved
14
GND
15
PWRIN(+15V)
PR
13
Regulatory Information
Radio Frequency Interference Requirements
This device has been tested and found to comply with the limits for a Class A digital
device pursuant to Part 15 of the Federal Communications Commissions Rules and
Regulation. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful interference to
radio communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the
interference at his own expense.
19
P D T
7 5 0 0
S e r i e s
However, there is no guarantee that interference will not occur in a particular
installation. If the equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Re-orient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
IN
This device complies with FCC Part 15. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference and (2) this device must
accept any interference received, including interference that may cause undesired
operation.
IM
Important Note: To comply with FCC and Industry Canada RF exposure requirements,
this hand-held device is approved for operation in a user's hand when there is 20 cm or
more between the antenna and the user's body.
Radio Frequency Interference Requirements - Canada
EL
This device complies with RSS 210 of Industry & Science Canada. Operation is subject
to the following two conditions: (1) this device may not cause harmful interference and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
This Class B digital apparatus complies with Industry Canada Standard ICES-003.
Cet appareil numérique de la classe B est conform à la norme NMB-003 d’Industrie
Canada.
PR
CE Marking and European Union Compliance
Products intended for sale within the European Union are marked with the
CE Mark which indicates compliance to applicable Directives and
European Normes (EN), as follows. Amendments to these Directives or
ENs are included:
Applicable Directives
• Electromagnetic Compatibility Directive 89/336/EEC
• Low Voltage Directive 73/23/EEC
20
Q u i c k
R e f e r e n c e
Applicable Standards
Laser Devices
IN
• EN 55 022 - Limits and Methods of Measurement of Radio Interference Characteristics of Information technology Equipment
• EN 55024:1998; Information technology equipment-Immunity characteristicsLimits and methods of measurement.
• EN 50 082-1:1997 - Electromagnetic Compatibility - Generic Immunity Standard, Part 1: Residential, commercial, Light Industry
• IEC 1000-4-2(1995-01) - Electromagnetic compatibility (EMC) - Part 4:Testing
and measurement techniques - Section 2: Electrostatic discharge immunity test.
• IEC 1000-4-3(1995-03) - Electromagnetic compatibility (EMC) - Part 4:Testing
and measurement techniques - Section 3: Radiated, radio-frequency, electromagnetic field immunity test.
• IEC 1000-4-4(1995-01) - Electromagnetic compatibility (EMC) - Part 4:Testing and
measurement techniques - Section 4: Electrical fast transient/burst immunity test.
• EN 60 950 + Amd 1 + Amd 2 - Safety of Information Technology Equipment
Including Electrical Business Equipment
• EN 60 825-1 (EN 60 825) - Safety of Devices Containing Lasers.
EL
IM
Symbol products using lasers comply with US 21CFR1040.10, Subchapter J and
IEC825/EN 60 825 (or IEC825-1/EN 60 825-1, depending on the date of
manufacture). The laser classification is marked on one of the labels on the product.
Class 1 Laser devices are not considered to be hazardous when used for their intended
purpose. The following statement is required to comply with US and international
regulations:
Caution: Use of controls, adjustments or performance of procedures other than those
specified herein may result in hazardous laser light exposure.
Class 2 laser scanners use a low power, visible light diode. As with any very bright light
source, such as the sun, the user should avoid staring directly into the light beam.
Momentary exposure to a Class 2 laser is not known to be harmful.
PR
RF Devices
Symbol’s RF products are designed to be compliant with the rules and regulations in
the locations into which they are sold and will be labeled as required. The majority of
Symbol’s RF devices are type approved and do not require the user to obtain license or
authorization before using the equipment. Any changes or modifications to Symbol
Technologies equipment not expressly approved by Symbol Technologies could void
the user’s authority to operate the equipment.
21
P D T
7 5 0 0
S e r i e s
Scanner Labeling
IN
AVOID EXPOSURE - LASER LIGHT IS
EMITTED FROM THIS APERTURE
EL
IM
ÉVITER TOUTE EXPOSITION LUMIÈRE LASER ÉMIS PAR CETTE OUVERTURE
PR
This label is located inside the battery compartment.
22
Q u i c k
R e f e r e n c e
DUTCH
KLASSE 1
KLASSE 2
ITALIAN
CLASSE 1
CLASSE 2
KLASSE-1 LASERPRODUKT
LASERLICHT
NIET IN STRAAL STAREN
KLASSE-2 LASERPRODUKT
LUOKKA 1 LASERTUOTE
LASERVALO
ÄLÄ TUIJOTA SÄDETTÄ
LUOKKA 2 LASERTUOTE
EL
FINNISH
LUOKKA 1
LUOKKA 2
KLASSE 1 LASERPRODUKT
LASERLYF
SE IKKE IND I STRÅLEN
KLASSE 2 LASERPRODUKT
AL LASER DI CLASSE 2
IN
DANISH
KLASSE 1
KLASSE 2
HEBREW
CLASS 1 LASER PRODUCT
LASER LIGHT
DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
IM
ENGLISH
CLASS 1
CLASS 2
In accordance with Clause 5, IEC 0825 and EN60825, the following information is
provided to the user:
FRENCH
CLASSE 1
CLASSE 2
LASERPRODUKT DER KLASSE 1
LASERSTRAHLEN
NICHT DIREKT IN DEN LASERSTRAHL SCHAUEN
LASERPRODUKT DER KLASSE 2
PR
GERMAN
KLASSE 1
KLASSE 2
NORWEGIAN
KLASSE 1
LASERPRODUKT, KLASSE 1
KLASSE 2
LASERLYS IKKE STIRR INN I LYSSTRÅLEN
LASERPRODUKT, KLASSE 2
PORTUGUESE
CLASSE 1
PRODUTO LASER DA CLASSE 1
CLASSE 2
SPANISH
CLASE 1
CLASE 2
PRODUIT LASER DE CLASSE 1
LUMIERE LASER
NE PAS REGARDER LE RAYON FIXEMENT
PRODUIT LASER DE CLASSE 2
23
PRODOTTO AL LASER DI CLASSE 1
LUCE LASER
NON FISSARE IL RAGGIOPRODOTTO
SWEDISH
KLASS 1
KLASS 2
LUZ DE LASER NÃO FIXAR O RAIO LUMINOSO
PRODUTO LASER DA CLASSE 2
PRODUCTO LASER DE LA CLASE 1
LUZ LASER
NO MIRE FIJAMENTE EL HAZ
PRODUCTO LASER DE LA CLASE 2
LASERPRODUKT KLASS 1
LASERLJUS STIRRA INTE MOT STRÅLEN
LASERPRODUKT KLASS 2
P D T
7 5 0 0
S e r i e s
Service Information
1-800-653-5350
Canada
905-629-7226
United Kingdom
0800 328 2424
Asia/Pacific
337-6588
Australia
1-800-672-906
Austria
1-505-5794
Denmark
7020-1718
Finland
01-40-96-52-21
Germany
Italy
2-484441
Mexico
Netherlands
315-271700
South Africa
11-4405668
Sweden
84452900
6074-49020
5-520-1835
Norway
66810600
Spain
9-1-320-39-09
1-800-347-0178 Inside US
+1-561-483-1275 Outside US
IM
Latin America Sales Support
9 5407 580
IN
France
United States
Before you use the unit, it must be configured to operate in your facility’s network and
run your applications.
If you have a problem running your unit or using your equipment, contact your
facility’s Technical or Systems Support. If there is a problem with the equipment, they
will contact the Symbol Support Center.
Europe/Mid-East Distributor Operations Contact local distributor or call
+44 208 945 7360
EL
Warranty
PR
Symbol Technologies, Inc. (“Symbol”) manufactures its hardware products in
accordance with industry-standard practices. Symbol warrants that for a period of
twelve (12) months from date of shipment, products will be free from defects in
materials and workmanship.
This warranty is provided to the original owner only and is not transferable to any third
party. It shall not apply to any product (i) which has been repaired or altered unless
done or approved by Symbol, (ii) which has not been maintained in accordance with
any operating or handling instructions supplied by Symbol, (iii) which has been
subjected to unusual physical or electrical stress, misuse, abuse, power shortage,
negligence or accident or (iv) which has been used other than in accordance with the
product operating and handling instructions. Preventive maintenance is the
responsibility of customer and is not covered under this warranty.
Wear items and accessories having a Symbol serial number, will carry a 90-day limited
warranty. Non-serialized items will carry a 30-day limited warranty.
24
Q u i c k
R e f e r e n c e
Warranty Coverage and Procedure
EL
General
IM
IN
During the warranty period, Symbol will repair or replace defective products returned
to Symbol’s manufacturing plant in the US. For warranty service in North America, call
the Symbol Support Center at 1-800-653-5350. International customers should contact
the local Symbol office or support center. If warranty service is required, Symbol will
issue a Return Material Authorization Number. Products must be shipped in the
original or comparable packaging, shipping and insurance charges prepaid. Symbol
will ship the repaired or replacement product freight and insurance prepaid in North
America. Shipments from the US or other locations will be made F.O.B. Symbol’s
manufacturing plant.
Symbol will use new or refurbished parts at its discretion and will own all parts
removed from repaired products. Customer will pay for the replacement product in
case it does not return the replaced product to Symbol within 3 days of receipt of the
replacement product. The process for return and customer’s charges will be in
accordance with Symbol’s Exchange Policy in effect at the time of the exchange.
Customer accepts full responsibility for its software and data including the appropriate
backup thereof.
Repair or replacement of a product during warranty will not extend the original
warranty term.
Symbol’s Customer Service organization offers an array of service plans, such as on-site,
depot, or phone support, that can be implemented to meet customer’s special
operational requirements and are available at a substantial discount during warranty
period.
PR
Except for the warranties stated above, Symbol disclaims all warranties, express or
implied, on products furnished hereunder, including without limitation implied
warranties of merchantability and fitness for a particular purpose. The stated express
warranties are in lieu of all obligations or liabilities on part of Symbol for damages,
including without limitation, special, indirect, or consequential damages arising out of
or in connection with the use or performance of the product.
Seller’s liability for damages to buyer or others resulting from the use of any product,
shall in no way exceed the purchase price of said product, except in instances of injury
to persons or property.
Some states (or jurisdictions) do not allow the exclusion or limitation of incidental or
consequential damages, so the proceeding exclusion or limitation may not apply to you.
0168
This product is marked with
in accordance with the Class II
product requirements specified in the R&TTE Directive, 1999/5/EC.
The equipment is intended for use throughout the European Community, but it's
authorization for use in France is restricted as follows:
• PAN European Frequency Range: 2.402 - 2.480 GHz
• Restricted Frequency Range for use in France: 2.448 - 2.480 GHz
25
Y
IN
IM
EL
PR
72-38888-02
Revision A — April 2000
Symbol Technologies, Inc. One Symbol Plaza Holtsville, NY 11742-1300

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Create Date                     : 2000:07:06 17:41:40
Producer                        : Acrobat Distiller 4.05 for Windows
Author                          : califano
Title                           : 72-38888-02a.fm
Creator                         : FrameMaker 5.5.6p145
Modify Date                     : 2000:07:06 17:42:01-04:00
Page Count                      : 28
Page Mode                       : UseOutlines

EXIF Metadata provided by EXIF.tools