Symbol Technologies Spectrum24 Ap 4131 Users Manual Tril_AP_3 0_

2015-02-02

• Spectrum24 AP-4131 Access Point
  • Contents
• Chapter 1 Introduction
  • 1.1 Access Point (AP)
  • 1.2 Radio Basics
    • 1.2.1 S24 Network Topology
    • 1.2.2 Cellular Coverage
    • 1.2.3 Site Topography
  • 1.3 Access Point Functional Theory
    • 1.3.1 MAC Layer Bridging
    • 1.3.2 Auto Fallback to Wireless Mode
    • 1.3.3 DHCP Support
    • 1.3.4 Media Types
    • 1.3.5 Direct-Sequence Spread Spectrum
    • 1.3.6 MU Association Process
    • 1.3.7 Mobile IP
    • 1.3.8 Supporting CAM and PSP Stations
    • 1.3.9 Data Encryption
    • 1.3.10 Kerberos Authentication
    • 1.3.11 KSS Open Enrollment
    • 1.3.12 KSS Databases
    • 1.3.13 Roaming and Authentication
    • 1.3.14 Mixed Mode Security
    • 1.3.15 Web Management Support
    • 1.3.16 Management Options
• Chapter 2 Configuring the AP
  • 2.1 Gaining Access to the UI
    • 2.1.1 Using Telnet
    • 2.1.2 Using a Direct Serial Connection
    • 2.1.3 Using a Dial-Up Connection
    • 2.1.4 Using a Web Browser
  • 2.2 Navigating the UI
    • 2.2.1 Entering Admin Mode
    • 2.2.2 Changing the Access to the UI
    • 2.2.3 Configuring for Dial-Up to the UI
    • 2.2.4 Navigating the UI Using a Web Browser
  • 2.3 Access Point Installation
  • 2.4 Configuring System Parameters
    • 2.4.1 Encryption Administration
    • 2.4.2 System Password Administration
  • 2.5 Configuring Radio Parameters
    • 2.5.1 Wireless AP Operation Parameters
    • 2.5.2 Enhanced Packet Prioritization (EPP)
    • 2.5.3 Enhanced Interference Avoidance Properties (EIAP)
  • 2.6 Encryption Configuration and Key Maintenance
    • 2.6.1 40-Bit WEP Encryption
    • 2.6.2 128-Bit WEP Encryption
    • 2.6.3 Manual Kerberos Authentication Configuration
    • 2.6.4 Configuring EAP-TLS Support
    • 2.6.5 Configuring Mixed Mode Security
  • 2.7 Configuring the SNMP Agent
    • 2.7.1 Configuring SNMPv3 Security
  • 2.8 ACL and Address Filtering
    • 2.8.1 Configuring the ACL
    • 2.8.2 Range of MUs
    • 2.8.3 Adding Allowed MUs
    • 2.8.4 Removing Allowed MUs
    • 2.8.5 ACL Options
    • 2.8.6 Removing All Allowed MUs
    • 2.8.7 Load ACL from MU List
    • 2.8.8 Load ACL from File
  • 2.9 Configuring Address Filtering
    • 2.9.1 Adding Disallowed MUs
    • 2.9.2 Removing Disallowed MUs
  • 2.10 Configuring Type Filtering
    • 2.10.1 Adding Filter Types
    • 2.10.2 Removing Filter Types
    • 2.10.3 Controlling Type Filters
  • 2.11 Clearing MUs from the AP
  • 2.12 Manually Updating the AP Configuration
    • 2.12.1 Updating Using TFTP
    • 2.12.2 Updating Using Xmodem
  • 2.13 Setting Logging Options
  • 2.14 Updating AP Firmware
    • 2.14.1 Update Using TFTP
    • 2.14.2 Updating Using Xmodem
  • 2.15 Auto Upgrade all APs Through Messaging
  • 2.16 Performing Pings
  • 2.17 Mobile IP Using MD5 Authentication
  • 2.18 Saving the Configuration
  • 2.19 Resetting the AP
  • 2.20 Restoring the Factory Configuration
  • 2.21 Configuring Network Time
• Chapter 3 Monitoring Statistics
  • 3.1 System Summary
  • 3.3 Forwarding Counts
  • 3.4 Mobile Units
  • 3.5 Mobile IP
  • 3.6 Known APs
  • 3.7 Ethernet Statistics
  • 3.9 Miscellaneous Statistics
    • 3.9.1 Analyzing Channel Use
    • 3.9.2 Analyzing Retries
  • 3.10 Event History
• Chapter 4 Hardware Installation
  • 4.1 Precautions
  • 4.2 Package Contents
  • 4.3 Requirements
    • 4.3.1 Network Connection
    • 4.3.2 10/100Base-T UTP
    • 4.3.3 Single Cell
  • 4.4 Placing the AP
  • 4.5 Power Options
  • 4.6 Mounting the AP
  • 4.7 Connecting the Power Adapter
  • 4.8 BIAS-T Low Power Distribution System
  • 4.9 LED Indicators
    • 4.9.1 WLAP mode LED display.
    • 4.10.1 Ensure wired network is operating
  • 4.11 Setting Up MUs
• Appendix A Specifications
  • A.1 Physical Characteristics
  • A.2 Radio Characteristics
  • A.3 Network Characteristics
• Appendix B Supported Modems
• Appendix C Customer Support
• Appendix D Country Identification Codes
• Appendix E Installing and Configuring Kerberos Setup Service
  • E.1 Creating a Windows 2000 Environment for the KSS
  • E.2 Installing the KSS in a Windows 2000 Environment
  • E.3 Preparing the KSS for Access Point Validation
  • E.4 Manually Creating an Access Point Setup Account
  • E.5 Implementing Kerberos without the KSS
    • Numerics
    • A
    • B
    • C
    • D
    • E
    • F
    • G
    • H
    • I
    • K
    • L
    • M
    • N
    • P
    • R
    • S
    • T
    • U
    • W
    • X
• Index