Synapse Wireless HCTAG01 Asset and personnel tracking device User Manual FCC Part 15
Synapse Wireless Inc. Asset and personnel tracking device FCC Part 15
Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2340318 |
| Application ID | tfgSoyW1TNoUTWbp46Dnyg== |
| Document Description | Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 14.34kB (179226 bits) |
| Date Submitted | 2014-07-30 00:00:00 |
| Date Available | 2014-07-30 00:00:00 |
| Creation Date | 2017-10-21 19:42:09 |
| Producing Software | GPL Ghostscript 9.18 |
| Document Lastmod | 2017-10-21 19:42:09 |
| Document Title | FCC Part 15 |
| Document Creator | Acrobat PDFMaker 11 for Word |
| Document Author: | Brooke Copeland |
Certification Exhibit FCC ID: U9O-HCTAG01 FCC Rule Part: 15.249 ACS Project Number: 14-2059 Manufacturer: Synapse Wireless, Inc. Model: HCTAG01 User Manual 3998 FAU Blvd. Suite 310 Boca Raton, FL 33431 Tel: 561-961-5585 Fax: 561-961-5587 DATA SHEET HCTAG Series Model Number: HCTAG01 Part Numbers: HCTAG-ST201 Document Revision v1.1 © 2013 Synapse, All Rights Reserved All Synapse products are patented or patent pending Specifications are subject to change without notice – confirm that data is current Synapse, the Synapse logo, SNAP, and Portal are all registered trademarks of Synapse Wireless, Inc. 500 Discovery Drive Huntsville, Alabama 35806 877-982-7888 Doc # 430157-01A Page 2 of 7 ©2013 Synapse Wireless, Inc. Document Number 430157-01A 500 Discovery Drive, Huntsville, AL 35806 HCTAG Data Sheet 256-852-7888 synapse-wireless.com Table of Contents 1. HCTAG01 OEM Device Overview ........................................................................................ 4 Specifications .............................................................................................................................. 5 Electrical Characteristics ............................................................................................................ 5 2. Agency Certifications ............................................................................................................. 5 United States (FCC) .................................................................................................................... 5 FCC Notices ............................................................................................................................ 6 HCTAG01 Data Sheet ©2014 Synapse Wireless, Inc. Document Number 430157-01A 6723 Odyssey Dr., Huntsville, AL 35806 877-982-7888 Page 3 of 7 synapse-wireless.com 1. HCTAG01 OEM Device Overview The HCTAG01 device is an IEEE 802.15.4, low-power, highly-reliable solution to embedded wireless control and monitoring network needs that require high data rates. The HCTAG01 embeds Synapse’s SNAP OS, the industry’s first Internet-enabled, wireless mesh network operating system into the Atmel ATMEGA1284RFR2-ZU singlechip AVR® microcontroller with an integrated transceiver that delivers up to 2Mbits/sec. This low-power TAG is intended to be used in Real Time Location Systems using RF technologies with power consumptions as low as 1.0 A to enable a new generation of battery-driven systems. SNAP’s on-board Python interpreter provides for rapid application development and over-the-air programming, while Atmel’s low-power RF single-chip design saves board space and lowers the overall Bill of Materials and power consumption. The HCTAG01 is approved as an FCC Part 15 unlicensed modular transmitters. The modules provide up to 16 channels of operation in the ISM 2.4GHz frequency band. The HCTAG01 device is intended to be a low-power transmitter with a low duty cycle (<14%) operation that can be worn on the body by the user. This Data Sheet details Part Number HCTAG01: • • • • • • • • • 128k flash, 58.5k free for over-the-air uploaded user apps One UART port (not externally accessible) for control or transparent data, which surmounts noisy environments Low power modes: 1.0 A with internal timer running Spread spectrum (DSSS) technology Up to 2 Mbps Data Rate 2.4 GHz RF Frequency Receive Mode (7 dBm) standard Transmit Mode (2-3 dBm) for good low-power range HCTAG01: ANT5320LL24R2400A, ANTENNA,CHIP,2.45GHz,50ohm,2.8dBi GAIN Page 4 of 7 ©2013 Synapse Wireless, Inc. Document Number 430157-01A 500 Discovery Drive, Huntsville, AL 35806 HCTAG Data Sheet 256-852-7888 synapse-wireless.com Figure 1.0 Block diagram showing the major subsystems comprising the HCTAG01 Specifications Table 1.0 HCTAG01 Specifications Performance Power Requirements General Networking Available I/O Agency Approvals Transmit Power Output RF Data Rate Receiver Sensitivity Supply Voltage Transmit Current (Typ@3.0V) Idle/Receive Current (Typ@3.0V) Power-down Current (Typ@3.0V) Frequency Spreading Method Modulation Dimensions Operating Temperature Antenna Option Topology Error Handling Number of Channels UARTS with HW Flow Control FCC Part 15.247 3 dBm 250Kbps, 500Kbps, 1Mbps, 2Mbps -107 dBm (1% PER) 2.7 - 3.6 V 40mA 20mA 1.0uA ISM 2.4 GHz Direct Sequence (DSSS) O-QPSK 3.25" x 2.0" x 0.375" -40 to 85 deg C. ANT5320LL24R2400A, Chip SNAP Retries and acknowledgement 16 1 Port - 8 total I/O FCC ID: U9O-HCTAG01 Electrical Characteristics The HCTAG01 is powered by quantity two AAA Alkaline Battery Cells. They are not intended to be user-replaceable. 2. Agency Certifications United States (FCC) HCTAG01 Data Sheet ©2014 Synapse Wireless, Inc. Document Number 430157-01A 6723 Odyssey Dr., Huntsville, AL 35806 877-982-7888 Page 5 of 7 synapse-wireless.com WARNING: The HCTAG01 modules have been tested by the FCC for use with other products without further certification (as per FCC Section 2.1091). Changes or modifications to this device not expressly approved by Synapse Wireless Inc. could void the user’s authority to operate the equipment. The HCTAG01 modules comply with Part 15 of the FCC rules and regulations. Compliance with the labeling requirements, FCC notices and antenna usage guidelines is required. FCC ID: U9O-HCTAG01 THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION FCC Notices WARNING: The HCTAG01 device has been tested by the FCC for use with other products without further certification (as per FCC Section 2.1091). Changes or modifications to this device not expressly approved by Synapse Wireless Inc. could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. RF Exposure Warning: Page 6 of 7 ©2013 Synapse Wireless, Inc. Document Number 430157-01A 500 Discovery Drive, Huntsville, AL 35806 HCTAG Data Sheet 256-852-7888 synapse-wireless.com “This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment is in direct contact with the body of the user under normal operating conditions. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.” HCTAG01 Data Sheet ©2014 Synapse Wireless, Inc. Document Number 430157-01A 6723 Odyssey Dr., Huntsville, AL 35806 877-982-7888 Page 7 of 7 synapse-wireless.com
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V4.4 (128-bit) User Access : Print, Extract, Print high-res Author : Brooke Copeland Create Date : 2014:07:24 07:33:33-04:00 Modify Date : 2014:07:24 07:34:16-04:00 Subject : Language : EN-US Tagged PDF : No XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Metadata Date : 2014:07:24 07:34:16-04:00 Creator Tool : Acrobat PDFMaker 11 for Word Document ID : uuid:e9087004-8f6e-4312-967f-873b858f8345 Instance ID : uuid:d8de3f32-bcd0-464f-8689-6a3875232f9e Format : application/pdf Title : FCC Part 15 Description : Creator : Brooke Copeland Producer : Adobe PDF Library 11.0 Keywords : Source Modified : D:20140623142339 Company : Advanced Compliance Solutions, Inc. Page Layout : OneColumn Page Count : 8EXIF Metadata provided by EXIF.tools