Syncomm Technology RADIOPORTB1990 RADIO PORT User Manual Manual

Download:
Mirror Download [FCC.gov]
Document ID	149895
Application ID	j0xDmMgnOVlibqs3KJV5zA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	144.11kB (1801422 bits)
Date Submitted	2001-05-14 00:00:00
Date Available	2001-08-08 00:00:00
Creation Date	2001-05-02 11:27:35
Producing Software	Acrobat PDFWriter 4.0 for Windows
Document Lastmod	2001-05-03 09:32:54
Document Title	穨Manual.PDF
Document Creator	穨Microsoft Word
Document Author:	穨Jill

SYNCOMM Proprietary
SYNCOMM Radio Port operation manual
1.Environment
Radio Port
Antenna
RS232 Cable: one set
Power module or Power supply: one set
PC or Notebook: one set
Antenna
Wire RS-232
RP
PC
Power
Module
Figure 1-1 Connection view of operation environment
Attention issues:
(1). Please make sure the antennas are connected with
Radio port before power on
(2). If no power module, you could use power supply
SYNCOMM Proprietary
2.Explication of operation
(1). Firstly, setup the environment as figure 1-1.
(2). Run Hyper Terminal, setup it and prepare for monitor RP’s
state. (Please refer the third item for how to setup hyper
terminal)
(3). Setup the parameter of RP. (Please refer the fourth item for
setup various parameter in RP)
3.Explication of how to setup Hyper Terminal)
Step 1: Run Hyper terminal
Hyper Terminal
Figure 3-1 the path for executing Hyper Terminal
After ran the Hyper Terminal you could see the status as below.
If you couldn’t find Hyper Terminal, you must re-install it
SYNCOMM Proprietary
Figure 3-2 the screen after ran Hyper Terminal
Step 2: Setting connection port
In figure 3-2,select “file”, select “content”, then get the screen
as below
Set the port that you connect
PC and RP use RS232
Figure 3-3 Select connection port
Step3: Port setting
SYNCOMM Proprietary
Set the data transfer rate (bits/second), bits per unit, parity
check, stop bits, data flow control as below.
Figure 3-4 Hyper Terminal port setting
4.Various parameter setting
After we done all the preceding action, we turn on the power of
RP and watch the windows of Hyper Terminal
(1). At first, the word “login” show on the window, and please
input the password 123
SYNCOMM Proprietary
(2). Enter main menu
(3). Input “rd” & press “Enter” to enter Research mode, there
are three kinds of mode, normal mode, research mode, and
test mode
SYNCOMM Proprietary
(4). Input 2 to enter RF test menu
(5). After enter RF Test menu, you can control to turn on of
turn off transmitter
SYNCOMM Proprietary
(6). If you Select 3, you can set the output power of
transmitter, the range from 0 to 255, mapping to output
power level from 0 to 800 mW, you can use this way to
setting output power level to correct output power level.
(7). Select 4, you can set the operation frequency of
transmitter, range from 0 to 599, mapping to 1.93 GHz
to 1.99GHz
SYNCOMM Proprietary

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Creator                         : .穨.Microsoft Word
Create Date                     : 2001:05:02 11:27:35
Title                           : .穨.Manual.PDF
Author                          : .穨.Jill
Producer                        : Acrobat PDFWriter 4.0 for Windows
Modify Date                     : 2001:05:03 09:32:54+08:00
Page Count                      : 8

EXIF Metadata provided by EXIF.tools