Syncomm Technology RADIOPORTB1990 RADIO PORT User Manual Manual 1

Download:
Mirror Download [FCC.gov]
Document ID	163320
Application ID	j0xDmMgnOVlibqs3KJV5zA==
Document Description	Addtional instructions for installation
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	68.26kB (853278 bits)
Date Submitted	2001-08-07 00:00:00
Date Available	2001-08-08 00:00:00
Creation Date	2001-08-06 16:56:46
Producing Software	Acrobat PDFWriter 4.0 for Windows
Document Lastmod	0000-00-00 00:00:00
Document Title	穨Manual-1.PDF
Document Creator	穨Microsoft Word
Document Author:	穨Lihsia

SYNCOMM Proprietary
1. Installation Guide
1.1. Material List
PACS RADIO PORT Material List
Component
Specification
Number
RADIO PORT
Quantity
MOUNTING PLATE
ANTENNA BRACKET
BRACKET ANGLE
MOUNTING BELT
MECHINIC SCREW M6*20
MECHINIC SCREW M6*40
WASHER
24
NUT SCREW
12
10
SPRING WASHER
12
11
ANTENNA ASS'Y
12
ANCHOR BOLT
13
ANTENNA CABLE
14
ABS COVER
1.2. Installation on utility pole or cylindrical pole
1.2.1.Installation requirements
The diameter of the utility pole or cylindrical pole should be between 20cm
and 35 cm. The material of the pole can be wood, cement or metal.
1.2.2.Installation procedure
Step 1.:
According to figure 5-1, assemble components (3) and (4) for two
sets (left and right) by M6*40 screws with grommet or spring
grommet between the screw and screw nut using components (7),
(8), (9), and (10).
Step2:
SYNCOMM Proprietary
Assemble the two combined entities (left and right) from Step1 with
component (2) by M6*20 screws with grommet or spring grommet
between the screw and screw nut using components (6), (8), (9),
and (10). Then press component (14) into component (3).
Step3:
Fix the rack from Step1 and Step2 on the pole by two stainless bands,
component (5), respectively on the op and the bottom following the instruction
in Figure 5-3.
Step4:
Screw two antenna sets (component (11) and component (13) ) onto the two
sides of component (3) tightly with antenna facing the outer side.
Step 5:
Fix the radio port (component (1)) on the rack by M6*20 screws with
grommet or spring grommet between the screw and screw nut
using components (6), (8), (9), and (10), and the installation is
complete.
Step 6:
According to figure 5-4, connect ANT0, ANT1, LINE cable, and the EARTH
cable to the RP.
SYNCOMM Proprietary
1.3. Installation on the wall
1.3.1.Installation requirements
It would be better that the wall is 8-inch thick.
Because the
adopted fixed crew is only for cement wall use, the other materials
such as wooden wall and metal wall are not applicable
1.3.2.Installation procedures
Step1:
According to figure 5-2, assemble components (3) and (4) for two
sets (left and right) by M6*40 screws with grommet or spring
grommet between the screw and screw nut using components (7),
(8), (9), and (10).
Step2:
According to figure 5-2, drill two holes on the wall by electrical
driller with fitting size measured from the metal rack. Then fix the
component (2) on the wall by component (12).
Step3:
Assemble the two combined entities (left and right) from Step1 with
component (2) by M6*20 screws with grommet or spring grommet
between the screw and screw nut using components (7), (8), (9),
SYNCOMM Proprietary
and (10).
Then press the plastic cap ( component (14) ) into
component (3).
Step4:
Screw two antenna sets( component (11) and component (13) )
onto the two sides of component (3) tightly with antenna facing the
outer side.
Step 5:
Fix the radio port ( component(1) ) on the rack by M6*20 screws
with grommet or spring grommet between the screw and screw nut
using components (6), (8), (9), and (10), and the installation is
complete.
Step 6:
According to figure 5-4, connect ANT0, ANT1, LINE cable, and the
EARTH cable to the RP.
SYNCOMM Proprietary
Figure. 5-1
SYNCOMM Proprietary
Figure. 5-2
SYNCOMM Proprietary
Figure. 5-3
SYNCOMM Proprietary
Figure. 5-4

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 8
Creator                         : .穨.Microsoft Word
Create Date                     : 2001:08:06 16:56:46
Title                           : .穨.Manual-1.PDF
Author                          : .穨.Lihsia
Producer                        : Acrobat PDFWriter 4.0 for Windows

EXIF Metadata provided by EXIF.tools