Sys Link Technology AC-B01 Auto Charger with Bluetooth User Manual Manual AC B01

Sys-Link Technology Co.,Ltd Auto Charger with Bluetooth Manual AC B01

User Manual

Download: Sys Link Technology AC-B01 Auto Charger with Bluetooth User Manual Manual  AC B01
Mirror Download [FCC.gov]Sys Link Technology AC-B01 Auto Charger with Bluetooth User Manual Manual  AC B01
Document ID2159835
Application IDbnUr3grYDeOZguA++c8hVQ==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize17.94kB (224305 bits)
Date Submitted2014-01-07 00:00:00
Date Available2014-01-07 00:00:00
Creation Date2014-01-02 09:32:34
Producing SoftwareAdobe Acrobat 8.1
Document Lastmod2014-01-02 14:25:15
Document TitleMicrosoft Word - Manual _AC-B01_.doc
Document CreatorPScript5.dll Version 5.2
Document Author: DEB1DEB1

User manual
Thank you for your choose Auto Charger with Bluetooth Series Charger, in order to let you easily experience the product, we
are equipped with detailed instructions, you can obtain the relevant product introduction, using methods such as knowledge,
please read the instructions carefully before you use the machine, if there is a misprint translation errors or do please understand.
1. Warnings
Store at room temperature environment and the use of this product.
Do not expose this product in the rain or damp environment;
Do not throw, avoid the damage caused by falling.
Please do not disassemble by repair and transform the product;
Built‐in lithium battery products, please do not arbitrarily discarded or set on fire, lest cause danger!
2. Warm Prompt
a.Failure, please immediately shut off the power switch, pull out the plug, prevent damage of components
b. when distance too far or have a mask too much the bluetooth easy to disconnect, please avoid in time.
3. Appearance and function keys
INPUTDC+
INPUT
DC+
INPUT DC‐
THE POWER AND BIUETOOH STATUS LAMP
OUTPUT DC5V
SWITCH/HF
AUDIO OUT
4.Product parameters
Part Number:AC‐B01
Bluetooth:CSR Bluetooth V2.1+EDR
Transmitting Distance:≤10M (Due to environmental factors and connect to Bluetooth devices vary)
Input Charging Voltage: DC10V‐32V
OUTPUT POWER:DC5V/2A
OUTPUT AUDIO
Requency Response : 60Hz‐15KHz`
SNR::≥76dB
Dimension::92*48*20mm
Weight:31g
FCC ID: 2ABH2AC‐B01
5. Packing &Accessory
1. Auto Charger with Bluetooth……………….x1
2. 3.5 audio line ……………………………..…..x1
3. Manual/warranty card ……………………..…x1
6.Connection Diagram
Note: AUDIO LINE, car end
of the LINE IN/AUX at the
other end connect AC ‐ B
01 AUDIO OUT
7. Functional specifications
On: connect the unit power, or long press "
" the stereo sends out "beep, beep" of the boot prompt, the bluetooth indicator light
flashing at the same time.
On the bluetooth connectivity, power supply, double click on the "
", the machine enter into the search matching state, the bluetooth
indicator light flash, a bluetooth device can search to the machine, click on the match, after the success of the connection, the
bluetooth indicator light flash, slow the stereo will send du a hint sound. Within 10 minutes after the power to open the
bluetooth speakers find any bluetooth equipment will automatically shut down also can be long press "
bluetooth. If the next to connect again need to electrical commissioning or long press "
" manual close
" boot, this machine is back to
league final equipment function; After successful connection of equipment to open the bluetooth automatically connected or
click "
" connection.
Warm prompt: if the connection fails, please shut down or restart to re‐enter the search matches.
After the success of the bluetooth music playback: bluetooth connectivity, equipment can play music directly.
Hands‐free calls: bluetooth stereo with mobile phone after the connection is successful, when the caller id, the stereo sends out "beep"
prompt tone; According to "
" answering the phone/long according to reject, can replace mobile phone talking to each
other, and then according to the end of "
" hang up the phone call, also can be long press "
" to redial the bottom
number phone.
Charger: insert the car power electricity long red light, no matter the bluetooth standby or shutdown state can be output 5 v / 2 a charge for
other devices
8. Compatibility
Wireless: equipped with BLUETOOTH 2.1 + EDR, or more advanced versions of the equipment, BLUETOOTH V2.1 + EDR includes the
following agreement: A2DP, AVRCP, HFP
9. Service
1. According to the instructions under normal use, as a result of the product itself quality problem, since the upgrade date enjoy one year
free warranty service or replacement.
FCC Information and Copyright
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1)This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment .The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Modify Date                     : 2014:01:02 14:25:15+08:00
Create Date                     : 2014:01:02 09:32:34+08:00
Metadata Date                   : 2014:01:02 14:25:15+08:00
Creator Tool                    : PScript5.dll Version 5.2
Format                          : application/pdf
Title                           : Microsoft Word - Manual _AC-B01_.doc
Creator                         : 
Document ID                     : uuid:311face6-d137-4187-80f0-a8af5693a6d2
Instance ID                     : uuid:71c2b293-83ac-4fa5-9c3a-b0bf55e9d664
Producer                        : Adobe Acrobat 8.1
Has XFA                         : No
Page Count                      : 3
Author                          : 
EXIF Metadata provided by EXIF.tools
FCC ID Filing: 2ABH2AC-B01

Navigation menu