Sysgration AGM-9200 RF Mouse User Manual users manual
Sysgration Ltd. RF Mouse users manual
users manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 297201 |
| Application ID | TZoO/4gRk12sWG9oTcupfw== |
| Document Description | users manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 56.17kB (702088 bits) |
| Date Submitted | 2003-01-21 00:00:00 |
| Date Available | 2003-01-20 00:00:00 |
| Creation Date | 2002-11-18 08:25:27 |
| Producing Software | Acrobat Distiller 5.0 (Windows) |
| Document Lastmod | 2003-01-20 19:01:01 |
| Document Title | users manual |
AQUI RF Crystal Mouse AGM-9200 Note: the manufacturer is not responsible for any radio or tv interference caused by unauthorized modifications to this equipment. such modifications could void the user's authority to operate the equipment. Table of Contents R&TTE Compliance...................................................................................... i Safety ............................................................................................................ i Federal Communications Commission Radio (FCC) Statement.............. i INTRODUCING THE AQUI .................................................................... 1 Package Contents....................................................................................... 1 System Requirements ................................................................................ 1 Features ....................................................................................................... 2 AQUI RF Crystal Mouse Components ....................................................... 2 INSERTING BATTERIES ....................................................................... 3 SETTING UP THE AQUI ........................................................................ 4 USING THE AQUI .................................................................................. 6 INSTALLING THE iWARE SOFTWARE ............................................... 7 USING THE SOFTWARE..................................................................... 11 Power Savings Mode ................................................................................ 12 A WORD ABOUT ERGONOMICS ....................................................... 13 TROUBLESHOOTING ......................................................................... 14 Mouse not detected .................................................................................. 14 Mouse doesn’t work after changing batteries ........................................ 14 Cursor doesn’t move properly on the screen......................................... 14 I N T R O D U C I N G T H E A Q U I Congratulations on your purchase of the AQUI RF Crystal Mouse, which combines an innovative ergonomic design with all the features and convenience of wireless technology. The AQUI RF Crystal Mouse has a scroll wheel/middle button that can be assigned various functions such as Web or word processor page scrolling, or launching applications such as Windows Explorer. The AQUI needs no software to operate. The USB or PS/2 interface makes it completely Plug and Play in all supported operating systems. The mouse uses two AA batteries. The receiver is powered by the USB or PS/2 interface on the PC. Package Contents After you have unpacked the AQUI RF Crystal Mouse, check the contents to make sure the following items are included. One mouse One RF receiver Two AA batteries (for the mouse) This quick guide USB to PS/2 adapter One floppy disk with application software If any of the above items are missing or appear damaged, contact your dealer immediately. Do not throw the shipping carton away in case you need to ship your AQUI RF Crystal Mouse. System Requirements Windows ME/2000/98/95/NT 4.0 or later USB or PS/2 port FDD drive (for application software installation) Features Wireless radio frequency (RF) technology Programmable button emulates middle mouse button and provides many advanced functions such as scrolling in Web pages and text editors, opening programs, or selecting previous/next slide in PowerPoint Plug and Play compliant Compatibility: PS/2 Interface: Windows ME/2000/98/95/NT4.0 USB Interface: Windows ME/2000/98 Compatible with PowerPoint and all other Windows-compatible presentation programs Compatible with IE and Netscape Web browsers AQUI RF Crystal Mouse Components The AQUI RF Crystal Mouse consists of a mouse and receiver. The following illustration shows the main components: USB to PS/2 adapter USB connector RF receiver Scroll wheel/middle mouse button Left mouse button (underneath) Right mouse button I N S E R T I N G B A T T E R I E S The AQUI RF Crystal Mouse requires two AA batteries to operate. Refer to the following instructions and illustrations for inserting the batteries: 1. Turn the AQUI RF Crystal Mouse over. 2. Press (A) with your finger and open the battery cover compartment in the direction of the arrow (B): 3. Insert two AA batteries into the compartment. Ensure that you orient the batteries according to the polarity markings inside the battery compartment. 4. Slide the battery compartment cover into the slots (A) and swing the cover closed (B): S E T T I N G U P T H E A Q U I Your AQUI RF Crystal Mouse receiver connects to the USB or PS/2 port on your computer. Note! Insert the batteries before connecting the AQUI RF Crystal Mouse. Refer to the previous section. Refer to the following instructions and illustrations to connect the AQUI RF Crystal Mouse to your PC: 1. Turn off your computer. 2. Plug the USB connector on the RF receiver cable into the USB port on your computer. If you want to connect to your computer’s PS/2 port, use the USB to PS/2 adapter. Connect the adapter to the RF receiver and then connect the receiver to the computer’s PS/2 port as shown: 3. Place the RF receiver and the mouse in the proper location for your computer. Note! Refer to the section on ergonomics later in the quick guide for more information on setting up your workstation. Place the receiver at least 8 inches (20 cm) from electrical devices such as the computer or monitor. 8 inches 4. Turn on the computer. If your OS is Windows 98, the Add New Hardware Wizard starts. Insert your Windows 98 CD into the CD-ROM drive. Follow the instructions on the screen. Use thekey to move among items on the screen and press to make selections. If the OS is Windows ME/2000/XP, the USB driver is installed automatically. 5. Use a bent paper clip to press the RF receiver connect switch (A), and then press the mouse connect switch (B). Note! Repeat Step 6 when connecting the AQUI RF Crystal Mouse for the first time and after replacing the batteries. Connect switches Note! You can also press the receiver connect switch (A) to awaken the computer from suspend mode. Ensure that the mouse is working. If the mouse does not respond to mouse movement, repeat Step 6 to ensure that a connection has been made. If it still is not working, refer to the Troubleshooting section at the end of this guide. U S I N G T H E A Q U I The innovative buttons on the AQUI RF Crystal Mouse make it easier than ever to use standard mouse functions. The mouse is equipped with two buttons and a scroll wheel/middle button: Scroll the wheel back and forth or press here to activate the middle mouse button. Press down on the front of the mouse to activate the left mouse button. Press here to activate the right mouse button. The AQUI RF Crystal Mouse’s left button is activated by pressing down on the front of the mouse. Use your thumb to press the right mouse button. Use your thumb to press or scroll the scroll wheel/middle button. Note! The AQUI has an 800-dpi sensor, which makes cursor sensitivity exceptionally high. If you are browsing the Web and make a selection with the right mouse button while accidentally moving the cursor, the selection will not be made. Ensure that you hold the cursor steady while making selections. 7 I N S T A L L I N G T H E W A R E S O F T W A R E The AQUI RF Crystal Mouse comes with software to enhance its function. The software is located on the bundled floppy disk. Note! Connect your AQUI RF Crystal Mouse before installing the software. Refer to the previous section. Follow these instructions to install the software for the AQUI RF Crystal Mouse: 1. Insert the application software floppy disk into the floppy disk drive. 2. Click Start, Run. Type “A:\Setup.exe” in the Run Open text box (where A is the letter of your floppy drive) and click OK. The iWare mouse installation program starts. 3. Click Next. 4. Select “3 Button Wheel Mouse,” and click Next. 5. Select “USB Port” or “PS/2 Port” and click Next. 6. Click Next to accept the default directory or browse to the desired directory. 7. Click Next to accept the default folder or type a new folder name. 8. Click Next to start copying files to your computer. 9. Click Finish to complete the installation. 10. When the computer has restarted, an iWare mouse icon appears in the taskbar. iWare mouse icon 10 U S I N G T H E S O F T W A R E After your computer restarts, the iWare Mouse icon lower right side of your screen in the taskbar: appears at the iWare Mouse Double-click the iWare Mouse icon in the taskbar to open the iWare Mouse Setting screen. The following table describes the iWare Settings: Wheel Tab Wheel Mode These two items define the operation of the scroll wheel: • System default (Intelli-Mouse) mode: this option sets the wheel scrolling function as Microsoft’s IntelliMouse standard. • Enhance scroll mode: enables enhanced scroll mode. Note! Experiment with these two modes; after some practice, choose the mode that best suits your work habits. Wheel Speed These items enable you to set how fast the page scrolls on the screen: • Scroll # lines per scroll unit: sets the number of text lines that the page will scroll. • Scroll one page per scroll unit: sets the screen to scroll one complete page at a time. 11 Button Tab Enables you to set the middle button function. Choose the function from the drop-down list. About Tab Provides the iWare software version. Refer to this screen when updating the software to ensure that you have the most recent version. Power Savings Mode The AQUI mouse features a power saving mode to save battery power. The optical sensor indicates the power saving mode. Refer to the following table: Mouse in use Optical sensor illuminates 1 second inactivity Optical sensor dims to indicate power saving mode. The mouse re-activates full power mode every 20 milliseconds. 10 seconds inactivity Optical sensor flashes quickly. The mouse reactivates full power mode every 100 milliseconds. 10 minutes inactivity Optical sensor flashes slowly. The mouse reactivates full power mode every 500 milliseconds. 1 hour inactivity Optical sensor flashes slowly. The mouse reactivates full-power mode every 2.5 seconds. Note! The mouse cursor is delayed slightly when you begin using the mouse after one hour of inactivity. 12 A W O R D A B O U T E R G O N O M I C S Ergonomics is the study of how people with their different physical characteristics and ways of functioning relate to their working environment (the furnishings and machines they use). The goal of Ergonomics is to incorporate comfort, efficiency, and safety into the design of keyboards, computer desks, chairs, and other items in an effort to prevent physical discomfort and health problems in the working environment. If your budget permits, buy ergonomically designed furniture such as chairs, shelves, and desks that fit your physical characteristics and work methods. You can create an ergonomically improved workstation without spending much money. Following are a few tips to help you work effectively without a lot of physical discomfort: • Keep your forearms, wrists, and hands in a relaxed position, with your elbows at your side. • Position the keyboard and mouse so that you do not have to reach for them. • Don’t strike the keys too hard; type with a soft touch. • Keep your thighs parallel to the floor and your feet flat on the floor or on a footrest. • Use a chair that provides good back support. • Try to place the monitor so that there is little glare from the sun on the monitor. • Walk around the room every hour. • Every half-hour look away from the computer screen for a few minutes. • Vary your tasks throughout the day. • Avoid resting your wrists on sharp edges. 13 T R O U B L E S H O O T I N G Mouse not detected If the AQUI RF Crystal Mouse doesn’t respond to activity, follow these steps: 1. Ensure that the receiver is properly connected to the USB or PS/2 port (refer to SETTING UP THE AQUI on page 4). 2. Ensure that the batteries have been installed correctly (refer to INSERTING BATTERIES page 3). 3. Ensure that there are no IRQ or I/O address conflicts. Refer to your operating system user’s manual for information on resolving IRQ and I/O address conflicts. Mouse doesn’t work after changing batteries If the AQUI RF Crystal Mouse doesn’t respond to activity after replacing the batteries, follow these steps: 1. Ensure that you have established a connection between the RF receiver and the mouse (refer to SETTING UP THE AQUI on page 4). 2. Ensure that the batteries have been installed correctly (refer to INSERTING BATTERIES page 3). 3. Ensure that the batteries are not discharged. Cursor doesn’t move properly on the screen If the cursor doesn’t move or the motion is erratic, follow these steps: 1. Ensure that you have established a connection between the RF receiver and the mouse (refer to SETTING UP THE AQUI on page 4). 2. Change the position of the RF receiver. There should be a distance of at least 8 inches (20 cm) between the receiver and any electrical appliance (such as speakers, the monitor, or the computer). 3. Ensure that the mouse batteries are not discharged. If they are discharged replace them (refer to INSERTING BATTERIES page 3). 14
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Create Date : 2002:11:18 08:25:27Z Modify Date : 2003:01:20 19:01:01+08:00 Page Count : 17 Creation Date : 2002:11:18 08:25:27Z Mod Date : 2003:01:20 19:01:01+08:00 Producer : Acrobat Distiller 5.0 (Windows) Metadata Date : 2003:01:20 19:01:01+08:00EXIF Metadata provided by EXIF.tools