Sysgration BSI03 Bluetooth Low Energy TPMS User Manual

Sysgration Ltd. Bluetooth Low Energy TPMS

User manual

1Bluetooth Low EnergyTire Pressure Monitoring SystemUser ManualModel: BSI-03
2Table of Contents1. PRODUCT INTRODUCTION.....................................................................................................32. NOTICE..........................................................................................................................................33. BLE TPMS SPECIFICATION.....................................................................................................54. BLE TPMS PACKAGE.................................................................................................................65. BLE TPMS SENSOR INSTALLATION.....................................................................................66. APP DOWNLOAD AND INSTALLATION...............................................................................87. SETTING & ADD DEVICE .......................................................................................................108. ALARMS AND WARNINGS .....................................................................................................189. SYSTEM SETTING ....................................................................................................................1910. EXCHANGE SETTING............................................................................................................2011. VOICE DONGLE SETTING ...................................................................................................2212. ABOUT .......................................................................................................................................2413. FREQUENTLY ASKED QUESTIONS...................................................................................2514. WARRANTY POLICY.............................................................................................................25
31. Product IntroductionWith the new technology product: Bluetooth Low Energy Tire Pressure Monitoring SystemRetrofit Kit (hereinafter referred to as BLE TPMS), the driver could get the accurate tire pressureand temperature at any time through smart phone by using this kit while driving. When the systemdetects abnormal status, it will alarm the driver actively, and show the abnormal data and its tirelocation on the BLE TPMS APP (hereinafter referred to as APP).2. NoticeProduct Warning2.1.1 Do not operate the APP while driving. The company is exempt from all responsibilitiesthat result from driver’s carelessness and improper operation.2.1.2 The system adopts the wireless transmission of signals. In some special environments,frequency interference, faulty operation or faulty installation may result in weaker signals orinability to receive signals. If the insulation adhesive sticker of the windshield contains metallicmaterial, it will affect the signal reception. When the alarm sounds and shows abnormal data, pleasedrive the vehicle away from the current location (there may be signal interference in thesurroundings) or drive the vehicle to a tire shop to be checked.2.1.3 If the TPMS sensor is low on battery(if abnormal conditions exist continuously, the batterymay make the TPMS sensors continuously emit signals to warn the driver, so the battery life will beshorter than expected), please go as soon as possible to a specified service station to confirmwhether the TPMS sensor needs to be replaced. You will take all the risks and responsibilities if youdo not change the sensor when the low battery sensor warning is displayed.2.1.4 Temporary resealing or re-inflation of product injected through the valve hole may adverselyaffect the operation of the sensor. The company is exempt from all responsibilities. Furthermore, donot place the TPMS sensor in contact with any chemicals. They might damage the sensor andprevent it from functioning properly.2.1.5 Please close any other APPs or web pages which are not in use when using the BLE APP.Data receiving status of the APP may be affected by the system load of the smart phone.
4Federal Communication Commission Interference StatementThis equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protectionagainst harmful interference in a residential installation. This equipment generates, uses, and canradiate radio frequency energy and, if not installed and used in accordance with the instructions,may cause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipment offand on, the user is encouraged to try to correct the interference by one or more of the followingmeasures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected.• Consult the dealer or an experienced radio/TV technician for help.FCC Caution:This device complies with Part 15 of the FCC Rules. Operation is subject to the following twoconditions: (1) This device may not cause harmful interference, and (2) this device must accept anyinterference received, including interference that may cause undesired operation.
53. BLE TPMS SpecificationBLE Sensor SpecificationOperating Voltage 3VOperating Humidity 95 % MAXOperating Current <15 mA at DC 3VStorage Temperature -40℃to 85 ℃Operating Temperature -20℃to 85 ℃Monitored Pressure Range Passenger: 0 to 92 psi (0 to 640 kPa)Truck: 0 to 185 psi (0 to 1280 kPa)Monitored Temperature Range -20 ℃to 85 ℃Operating Frequency 2.4GHzTransmission Power 4 dBm MAXBattery Life 3 years (under normal operating condition)Battery Capacity 540 mAhWeight 45 ± 3 g (including valve)Voice Dongle SpecificationOperating Voltage 5VOperating Humidity 95 % MAXOperating Current <900 mA at DC 5VStorage Temperature -40℃to 85 ℃Operating Temperature -20℃to 85 ℃Sound Pressure (min.) 80dB@30cmOperating Frequency 2.4GHzTransmission Power 4 dBm MAXWeight 10 ± 1 g
64. BLE TPMS Package5. BLE TPMS Sensor Installation5.1 BLE TPMS Sensor Accessories1. Screw 2.TPMS sensor 3.Valve and rubber washer 4.Washer 5.Nut 6.Valve CapPart Name QuantityBLE TPMS Sensor 4 pcsValve 4 pcsScrew 4 pcsUser Manual 1 pcsVoice Dongle 1 pcs
75.2 Installation Steps(Fig. 1)Loosen the tire: fix both sides of the tire, pressand make it bulge.(Fig. 2)Remove the tire: the valve faces the mountingarm in the one o’clock direction when removingthe tire.(Fig. 3)Install the sensor and valve: insert the valvethrough the rim hole, fix the screw to secure thevalve and sensor by 2 Nm in torque, attach thesensor body to the inner surface of the rim byadjusting the angle of the sensor body.(Fig. 4)Install valve to the rim hole: guide the washerinto the valve, and fix the nut by 4 Nm in torque,then tighten the cap.(Fig. 5)Mount the tire: grip the rim edge and the valve isopposite to the mounting arm, avoid hitting thesensor during arm operation.After installation, please download the APP toyour smart phone, and proceed with all settings.
8Note 1: After installation, recalibrate the rim set on the balance machine to avoid shakingduring driving.Note 2: The “sensor valve” and “screw” are not included in product warranty. Whenreplacing the sensor, it is suggested to use a new sensor valve and screw.6. APP Download and Installation6.1 Operation System RequiredTPMS system supports both smartphone for Android & iOS operation system. (Bluetooth 4.0)。APP Download Operation System Compatible SmartphoneAPPLE APP Store iOS 7.1.2 or later iPhone 4S, 5, 5S, 6, 6 Plus orlaterAndroid Google Play Store Standard Android 4.3 or later Android Smart Phone6.2 How to DownloadSearch in the Google Play Store or APPLE APP Store by keyword “BLE” or ”TPMS” , in order tofind the free APP.( SYSGRATION BLE TPMS APP )After you install the APP, please reboot and make sure Bluetooth is enabled. Open the APP afterinstallation is completed. A statement from the operation system will pop up, displaying “BluetoothService Disabled” and/or “Location Services Disabled”. Please choose “ok” to turn on the“Bluetooth” & “Location Services” function.
9In case “Location Services” is not turned on properly, please turn it on in “Settings” (only for iOSsystem).iOS version Android version
107. Setting & Add Device7.1 Introduction of ContentsPlease make sure the “Bluetooth” & “Location Service” Setting functions are enabled when youstart to use the APP.iOS version Android versionStart-up Page of the APP
11iOS version Android versionMain Menu:Driving: Displays thepressure, temperature andvoice warning of the fourtires. (Note 1)Setting: System settings.Add Device Setting: Enterthe learning setting whenusing for the first time.(p.11).Exchange: Tire exchangesetting.Voice Dongle: Donglesetting. (Note 2)About: Disclaimer &Company Information.Note 1: iOS version: enter the system Settings-> BLE TPMS APP->Notifications->Enable notification and support background execution.Note 2: Voice Dongle and TPMS Sensor have been paired. If adjustments are madein “System Setting” and “Exchange”, please change the settings in “Dongle”.
127.2 New Device SettingiOS version Android versionPic 1 Pic 1New Device SettingManual Learning:1. Select Manual Learning.(Pic 1)Pic 2 Pic 2
13iOS version Android versionPic 3 Pic 32. Choose tire 1 and key inthe five-character sensor ID(Please refer to last page: IDsticker), which mightinclude “0-9”, “A-F”, or ”a-f”, when a blank space popsup. (Pic 3)Pic 4 Pic 43. Manual Learningcompleted. (Pic 4) Using thesame method, set up the IDlearning for tire 2(RF), tire3(RR) and tire 4(LR) insequence.
147.3 Rapid Deflation SettingiOS version Android versionPic 1 Pic 1Rapid Deflation Setting :1.Select Rapid Deflation Setting.(Pic 1)Pic 2 Pic 22. Choose tire 1 (LF) and deflatethe tire pressure. The APP will lookfor the deflation signal, showingnew ID number on the dialoguedisplay. You can press “OK’ tofinish this step or press "Cancel". Ittakes 120 seconds to perform thisstep. (Pleaseask a qualified tire shop to installthe product) (Pic 2)
15iOS version Android versionPic 3 Pic 33. Rapid Deflation completed. (Pic3) Using the same method, set upthe ID learning for tire 2(RF), tire3(RR) and tire 4(LR) in sequence.
167.4 QR Code SettingiOS version Android versionPic 1 Pic 1QR Code Setting :1.Select QR Code Setting. (Pic 1)Pic 2 Pic 22.Choose tire 1 (LF)The APP will scan qr code,showing new ID number on thedialogue display. You can press“Clear ID” or “Stop scan” or“Save ”button. (Please ask aqualified tire shop to install theproduct) (Pic 2)
17iOS version Android versionPic 3 Pic 33. QR Code completed. (Pic 3)Using the same method, set up theID learning for tire 2(RF), tire3(RR) and tire 4(LR) in sequence.
188. Alarms and WarningsiOS version Android versionSystem Warning:When abnormal tire systemstatus occurs, the value of thecorresponding tire turns red, and italarms with a sound and warningsymbol. The warning symbols oneach tire display, from the left tothe right, are: tire pressurewarning, rapid deflation, no signal,tire temperature warning and lowbattery power of sensor. If you donot want to hear the sound fromthe voice dongle and the APP,please exit the APP and mute thevoice dongle.1. Warning of high tire pressure or low tire pressureTire pressure is higher than maximum tire pressure value or lower than minimum tire pressurevalue on the APP.2. Warning of rapid deflation of tire pressureAny tire pressure that decreases rapidly.3. No signalThe phone can not receive any signal: red symbolizes4. Warning of high tire temperatureTire temperature is higher than temperature maximum value on the APP.5. Low battery power warning of TPMS sensorBattery power of TPMS sensor is low.
199. System SettingiOS version Android versionSystem Setting:Unlock the system setting by clicking onthe “lock” icon on the upper-right side ofthe main display.Change settings on “front wheel” and “rearwheel” then press the “Save” button tosave the settings. You can press “DefaultValue” to reset all settings. (Note 1)Pressure Unit: Bar, kPa, psi; 3 differentpressure units.Temperature Unit: ℃,℉; 2 differenttemperature units.Warning Audio Setting: Default, piano 1,piano 2, piano 3, bird, fantasy, impromptuMail TPMS Data: Send log data. (Note 2)Click the lock icon again to complete thesetting.Note 1: For the standard tire pressure value, please refer to the placard located at theside of the driver’s seat.Default Value: Maximum tire pressure: psi= 43; kPa= 300; Bar= 3.0Minimum Tire pressure: psi= 26; kPa:180; Bar= 1.8Maximum Temperature: ℃= 80; ℉= 176Note 2: Mail TPMS data:iOS version: iPhone Setting->BLE TPMS App->GROUP FOR MAIL>RecordData EnablediOS version supports only the system E-mail and does not support otherdownloaded E-mail Apps. (eg: Gmail)Android version: Select Info Setting to fill in e-mail address.
2010. Exchange SettingiOS version Android versionPic 1 Pic 1Tire Exchange Setting:1.Unlock the system setting byclicking on the “lock” icon on upper-right side of the main display.Pic 2 Pic 22.Tire positions are displayed insequence (1, 2, 3, and 4), meaningleft-front, right-front, right-rear andleft-rear with ID.
21iOS version Android versionPic 3 Pic 3Drag the dialogue display of the tireto the desired location for all desiredexchanged tires, then press the“Save” icon. It will display the newtire positions in sequence (1, 2, 3,and 4).Pic 4 Pic 4iOS version: Click the “lock” icononce again to complete the settings.Android version: Click “exit” andthen click on the “lock” icon again tocomplete the settings.
2211. Voice Dongle SettingiOS version Android versionPic 1 Pic 1Voice Dongle Setting:Recommend for 5V/2A car USBpower charger adapter for voicedongle.Pic 2 Pic 21. Press the red voice donglebutton for 1.5 seconds. Whenyou hear “beep,” you will gointo the Bluetooth pairing mode(LED : flicker of Red and Bluelight ). (Pic 2)
23iOS version Android versionPic 3 Pic 32.Enter menu ->click ”Dongle”function ->click“TPMS_Dongle_sn” (random serialnumber), “TPMS_Dongle_snConnected” will be shown in bluecolor. (Pic 3)Pic 4 Pic 43. iOS version: The APP willautomatically download the settingswhen you hear “Setup completed.”You can start using after “Voicedongle Setting OK” is displayed.Android version: Please click write.The APP will automaticallydownload the settings when youhear “Setup completed.” When“Dongle Setting OK” is displayed,you can start using.Double click: Tire Status Report.Mute/ Un-Mute: Press the redbutton to mute. Press the red buttonagain or wait 10 minutes for themute function to cancelautomatically.
2412. AboutiOS version Android versionAbout:“Product Information” isdisplayed. It describes thedefinition of “WarningSymbol” and shows the linkto the “Company Website”.You can press the link to goto the company’s website.
2513. Frequently Asked Questions1. After inserting the sensor ID number into the APP, the dialogue display remains withouta value.A: TPMS sensor only transmits data when the sensor is on a car that is going over 20 kmper hour, is started after parked for over ten minutes, or the tire pressure difference at themoment is 30 kPa. During other times, data will not be transmitted in order to save power. Youcan check if the TPMS sensor is working normally through tire pressure increase or deflation.2. Smart phone has completed the installation of the APP, the sensor ID settings aredone, and the car is being driven, but no data is shown.A: Please restart the start phone and check if Bluetooth was turned off.3. There is no alarm sound or voice warning for abnormality of tires.A: Please check if the start phone has gone in silent mode or if the volume has beenturned to lowest.4. There is alarm sound for tire abnormality but no voice warning.A: Some Android smart phones do not support voice services. Please contact the smart phonemanufacturers.14. Warranty PolicyThank you for buying this product and giving us support. From the date of purchase, we providea one-year warranty for the product, protecting the client’s interest by providing product qualityassurance. During the warranty period, under normal operation and in the event of a faulty product,the company is willing to repair the faulty product or have it replaced, enabling you to get theguarantee and demonstrating the company's responsible attitude toward products. But the productwarranty must meet the following conditions:1. Defective products need to be provided to local dealer to confirm purchase date and cause ofdefect.2. Products must be operated correctly, as indicated in the user manual.3. Product has not been disassembled by yourself.4. The main cause of product failure is due to manufacture issues.
26Disclaimer:This product is only to be used as precautionary warning and provides to user as a convenientsecondary safety equipment. Please follow the standard installation procedures or ask a qualifiedtire shop to install the product. If the tire has been damaged or traffic accident resulting fromimproper driving behavior occurs, the company will not be responsible for any civil or criminalliabilities.Other relevant latest information of SYSGRATION TPMS is available at our website(http://www.sysgration.com/ ) and our Facebook Page (http://www.facebook.com/sysgration) for latestinformation.
27BLE TPMSMODEL: SBT-30WARRANTY CERTIFICATEhttp://www.sysgration.com/LF RFLR RRLF ID stickers here RF ID stickers hereLR ID stickers here RR ID stickers hereSERIAL NUMBERSSensor’s ID stickers:WARRANTY PERIOD:One (1) YearPURCHASE DATE: Y. M. D.DISTRIBUTOR STAMP:

Navigation menu