Sysgration JRVCS105DC JRVCS105 Display Commander User Manual JRVCS105 MANUAL 04112016
Sysgration Ltd. JRVCS105 Display Commander JRVCS105 MANUAL 04112016
Contents
- 1. User manual
- 2. User manaul
User manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3058074 |
| Application ID | isRNBP+llRO1dvzFn7vAlA== |
| Document Description | User manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 98.13kB (1226641 bits) |
| Date Submitted | 2016-07-11 00:00:00 |
| Date Available | 2016-07-11 00:00:00 |
| Creation Date | 2016-06-23 10:38:30 |
| Producing Software | Acrobat Distiller 11.0 (Windows) |
| Document Lastmod | 2016-06-23 10:38:30 |
| Document Title | Microsoft Word - JRVCS105 MANUAL 04112016 |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | dorisgao |
JRVCS105 RV CONTROL AND MONITORING SYSTEM Installation and Operation Manual JRVCS105 TABLE OF CONTENTS Table of Contents ........................................................................................................................................................................................................................................................................................... 2 Introduction .................................................................................................................................................................................................................................................................................................... 4 Thank You! .............................................................................................................................................................................................................................................................................................. 4 Features .................................................................................................................................................................................................................................................................................................. 4 Precautions ............................................................................................................................................................................................................................................................................................. 4 Packing List ...........................................................................................................................................................................................................................................................錯誤! 尚未定義書籤。 Installation ...................................................................................................................................................................................................................................................................................................... 5 Tools and Supplies .................................................................................................................................................................................................................................................................................. 5 Disconnecting the Battery ....................................................................................................................................................................................................................................................................... 5 Selecting the Mounting Location ............................................................................................................................................................................................................................................................. 5 Mounting the Display Commander (DC) ................................................................................................................................................................................................................................................. 5 Wiring Terminal List ........................................................................................................................................................................................................................................................................................ 6 BCM and DC Wiring Diagram ........................................................................................................................................................................................................................................................................ 7 SETUP MENU LIST ....................................................................................................................................................................................................................................................................................... 8 SAFETY LOCK OUT…………………………………………………………………………………………………………………………………………………………………………………………………………….9 Troubleshooting ............................................................................................................................................................................................................................................................錯誤! 尚未定義書籤。 Override Switches .........................................................................................................................................................................................................................................................錯誤! 尚未定義書籤。 Display Commander Buttons………………………………………………………………………………………………………………………………………………………………………………………………….11 Specifications ............................................................................................................................................................................................................................................................................................... 12 FCC Notes ............................................................................................................................................................................................................................................................................................ 12 Passcode Protection .................................................................................................................................................................................................................................................................................... 13 Menu: ........................................................................................................................................................................................................................................................................................................... 14 Text Editing ........................................................................................................................................................................................................................................................................................... 14 Scroll List Editing .................................................................................................................................................................................................................................................................................. 15 Tanks..................................................................................................................................................................................................................................................................................................... 15 Lights .................................................................................................................................................................................................................................................................................................... 15 Slides .................................................................................................................................................................................................................................................................................................... 16 Awnings ................................................................................................................................................................................................................................................................................................ 16 Passcode .............................................................................................................................................................................................................................................................................................. 17 Set Passcode Timer ................................................................................................................................................................................................................ 18 Change Passcode.................................................................................................................................................................................................................... 18 Clear Passcode ....................................................................................................................................................................................................................... 18 Paring a Mobile Device to DC ...................................................................................................................................................................................................................................................................... 19 Checking Active Bluetooth Session ............................................................................................................................................................................................................................................................. 22 JRVCS105 Software Update .......................................................................................................................................................................................................................................................................................... 24 Reset: Floor Plan ......................................................................................................................................................................................................................................................................................... 26 System Calibration ....................................................................................................................................................................................................................................................................................... 27 JRVCS105 INTRODUCTION Packing List Thank You! Thank you for choosing iN-Command. We hope you will find the instructions in this owner’s manual clear and easy to follow. If you take a few minutes to look through it, you’ll learn how to use all the features of your new JRVCS105 for maximum enjoyment. Features Features of Jensen JRVCS105 system include: Simultaneous control by up to three Android Devices and one iOS Device Control two zones of Interior Lighting Monitor all water tank levels Control and monitor the Water Heater (switches between LP or AC) Control and monitor the Water Pump Control Awning Control Electric Slides Control Jacks (non-automatic function) Monitor Battery Voltage with Low Voltage Alert 1 Cover, 1 Thumb Screw Precautions Use the Proper Power Supply. This product is designed to operate with a 12 volt DC, negative ground battery system (the standard system in a North American vehicle). Use Authorized Service Centers. Do not attempt to disassemble or adjust this precision product; contact a professional for assistance. Avoid Moisture. To reduce the risk of fire or electric shock, do not expose this equipment to rain or moisture. Avoid Cleaning Products. The front of this unit should only be cleaned with a slightly damp cloth. Do not use cleaning products. Use Recommended Accessories. TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK AND ANNOYING INTERFERENCE, USE ONLY THE RECOMMENDED ACCESSORIES. 1 Body Control Module (BCM) 1 Display Commander (DC) JRVCS105 INSTALLATION It’s a good idea to read all of the instructions before beginning the installation. We recommend having your Jensen JRVCS105 installed by a reputable RV dealership Tools and Supplies CUTOUT FOR DISPLAY COMMANDER (DC) You will need these tools and supplies to install your JRVCS105: Phillips screwdriver #2 square drive bit Wire cutters and strippers Electrical tape Volt meter/test light Crimping tool Fork Crimp connectors 10 gauge wire for power and slide connections 14 and 18 gauge wire for all other connections Four #8 PH (0.164” x 0.75”) screws for the DC Six #8 PH (0.164” x 1.0”) screws for the BCM 3.0 4.33 Disconnecting the Battery To prevent a short circuit, be sure to turn off 12V power and remove the negative (-) battery cable prior to installation. NOTE: Before cutting the mounting hole, make sure the area behind the mounting Selecting the Mounting Location location is clear of wires, fuel and vacuum or water lines; ensure there is at least a Select a mounting location, taking care to avoid the following: 2.75”clearance below the Display Commander to allow for programming by USB stick. Places exposed to heat-radiating appliances such as electric heaters Adjacent to other equipment that radiates heat Under thermostats Poorly-ventilated or dusty places Moist or humid locations Mounting the Display Commander (DC) Use the mounting hole diagram to measure and cut a mounting hole, allowing space below for future programming and behind for ventilation Route power and transmit wires through the hole and connect Check and ensure correct operation Mount the unit using four #8 PH (0.164” x 0.75”) screws Attach Trim ring JRVCS105 WIRING TERMINAL LIST The wiring diagram depicts all the wiring connections required for proper operation of the unit. The TX (transmit) and RX (receive) wires from the BCM to DC are reversed at each device (the BCM transmits and the DC receives, and vice versa). BODY CONTROL MODULE (BCM) CONNECTIONS PIN NO. WIRE GAUGE DESCRIPTION 18 AWG FRESH TANK 1 (IN) PIN NO. WIRE GAUGE 19 16 AWG TRAVEL LOCK +12V (IN) 18 AWG BLACK TANK 1 (IN) 20 14 AWG WATER PUMP +12V (OUT) 18 AWG BLACK TANK 2 (IN) 21 14 AWG WATER PUMP -12V (GND) 18 AWG GRAY TANK 1 (IN) 22 14 AWG WATER PUMP +12V (IN) 18 AWG GRAY TANK 2 (IN) 23 12 AWG MOTOR 5 -12V (IN) 18 AWG GRAY TANK 3 (IN) 24 12 AWG MOTOR 5 +12V (OUT) 18 AWG TANK COMMON 7V (OUT) 25 10 AWG MOTOR 4 -12V (IN) 14 AWG LIGHT GROUPS +12V (IN) 26 10 AWG MOTOR 4 +12V (OUT) 14 AWG LIGHT GROUP 1 – 12V (GND) 27 10 AWG MOTOR 3 -12V (IN) 10 14 AWG LIGHT GROUP 1 +12V (OUT) 28 10 AWG MOTOR 3 +12V (OUT) 11 14 AWG LIGHT GROUP 2 -12V (GND) 29 10AWG MOTOR 2 -12V (IN) 12 14 AWG LIGHT GROUP 2 +12V (OUT) 30 10 AWG MOTOR 2 +12V (OUT) 13 14 AWG AWNING LIGHT -12V (GND) 31 10 AWG MOTOR 1 -12V (IN) 14 14 AWG AWNING LIGHT +12V (OUT) 32 10 AWG MOTOR 1 +12V (OUT) 15 18 AWG WATER HEATER FAULT 33 10 AWG CHASSIS GROUND (IN) 16 18 AWG WATER HEATER GROUND 34 10 AWG MOTOR FEED+12V (IN) 17 18 AWG WATER HEATER ON 35 10 AWG BCM +12V (IN) 18 18 AWG WATER HEATER ON (ELECTRIC) 36 N/A (GAS) DESCRIPTION NONE JRVCS105 BCM AND DC WIRING DIAGRAM JRVCS105 SETUP MENU LIST ITEM Tanks, light groups, and motor functions can be added or removed. SELECTION Black Water Tank 2 No, Yes Gray Water Tank 2 No, Yes Grey Water Tank 3 No, Yes may not include relays for non-OEM functions. Basic automotive 1505 relays (12VDC Light Group 1 No, Yes Coil, 40/30A 14VDC Contact) can be purchased for installation and repair. Light Group 2 No, Yes Awning Light No, Yes Motor 1 No, Yes Motor 2 No, Yes Motor 3 No, Yes Motor 4 No, Yes Motor 5 No, Yes Motor functions may include slides, awnings, jacks, or any motor that may be controlled with a momentary switch. Refer to the Wiring Diagram and Terminal List when installing new equipment. The BCM JRVCS105 SAFETY LOCKOUT IN-Command is equipped with a Safety Lockout feature to ensure certain system functions are unavailable during transit. When the Brake or Right Turn Signal on the tow vehicle is activated, IN-Command will lock down all motorized functions. A red button, with Travel Lock in white text, will appear on the DC and mobile devices will display “Travel Lock On” in red letters. All motor functions will cease to actuate and Disable will be written on their buttons. The lights, water pump, water heater, and sensors will continue to function. To turn the Travel Lock off, ensure 12VDC is not going to the Travel Lock system by removing the 7-way connector from the tow vehicle and press the “Unlock” button on the Display Commander inside the RV. Travel Lock on a handheld device app Travel Lock on the Display Commander JRVCS105 TROUBLESHOOTING Symptom Solution Display Commander (DC) will not turn ON or the touch screen will not function Press Reset Button on BCM Check main fuse in Distribution Panel. Check 12V+ on wire to DC (RED wire). Check Ground wire to DC. Try cycling power at Distribution Panel. Check if the Red power LED is off. Check the fuse in the Distribution Panel. Check 12V+ on wire at pin 35. Check Ground wire at pin 33. Ensure Pin 7 is NOT grounded Cycle power to the BCM and DC Ensure the wires to the BCM and DC are connected and there is 12V Ensure the wires to the BCM and DC are not damaged or pinched Ensure the Battery is charged No power to the Body Control Module (BCM) DC screen flashing on and off after installation Electric Motors do not move Check 12V+ at Pin 34. Ensure the relay activates*. Travel Lock on Ensure 12V+ is removed from Pin 15. *Relay not activating Replace the 1505 relay with one from an unused circuit by gently pulling it off the board, or install an new one. If an issue is unable to be resolved using the above methods, contact ASA Electronics Technical Support at 1-877-845-8750 or email them at info@asaelectronics.com 10 JRVCS105 OVERRIDE SWITCH The Body Control Module has an override switch and knob. The knob below the switch corresponds to a motor function made by the Display Commander and Handheld Devices App. The switch and knob actuate all the motor functions on the RV. To use the override switches, locate the switch on the BCM. Turn the knob underneath the switch to select the component. Press up or down on the switch. The switch is momentary and will activate the component only while pressed in either direction. DISPLAY COMMANDER BUTTONS The DC (Display Commander) has 4 buttons on the front of it. From left to right, they are: Power Pages Home Return The Power Button turns the DC on and off (long press) and revives it (short press). Pages Button navigates forward through the system. the Home page. The The Home Button returns you to The Return Button returns you to the previous page. 11 JRVCS105 SPECIFICATIONS FCC Notes Display Commander (DC) Operating Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12VDC WARNING! Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Maximum Current Draw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.5A@9VDC Minimum Operating Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9VDC NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Maximum Operating Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16VDC Body Control Module (BCM) Operating Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12VDC Maximum Current Draw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.5A@12VDC Minimum Operating Voltage This equipment generates, uses and can radiate radio frequency energy and, if not installed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9VDC and used in accordance with the instructions, may cause harmful interference to radio Maximum Operating Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16VDC communications. JRVCS105 System However, there is no guarantee that interference will not occur in a particular installation. If this EPROM Non-Volatile Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . YES equipment does cause harmful interference to radio or television reception, which can be Bluetooth Version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.0 BLE determined by turning the equipment off and on, the user is encouraged to try to correct the General interference by one or more of the following measures: Body Control Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14.9” (W) x 10.4” (D) x 1.8” (H) Display Commander . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.2” (W) x 3.8” (D) x 1.5” (H) Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 12 Consult the dealer or an experienced radio/TV technician for help. JRVCS105 PASSCODE PROTECTION A passcode is required to access the system. On first using the system, you are required to Confirm the new passcode. enter and confirm a new passcode. 13 JRVCS105 MENU: 2. Long press the intended text, e.g., “Motor 1”. From the Menu screen you can: Edit IN-Command function text Reposition functions Enable/disable functions See the status of IN-Command Connect devices with Bluetooth Change the passcode Reset the floor plan And view IN-Command’s legal documents and customer support information The Setup button is used by the manufacturer. Text Editing 1. 3. A device rename window will open. Press “OK” after completing the text editing. Note: Editing the text on the DC will not change the text on a device’s app. Press the “Pages” button 2 times. Motor 1 14 JRVCS105 Scroll List Editing Tanks 1. Push the “Pages” button twice. Black water tanks, and Gray water tanks can be added to the system. Press and hold the “≡” icon before the device name and drag to move the device to a new Lights location, “Motor 1” is shown as an example. Light Groups can be added to the system. 2. 15 JRVCS105 Slides Slides can be added to the system. Awnings Awnings can be added to the system. 16 JRVCS105 Passcode 1. Push the “Pages” button twice. 2. Press “ 3. ” to enter passcode setup. 17 To change Passcode you will need to enter the current passcode. JRVCS105 Set Passcode Timer Press the “Set Timer” button to select the idle time to activate the passcode protection. 3. Clear Passcode Change Passcode 1. Press the “Change Passcode” button to change to a new passcode. 2. Enter the new passcode. Confirm new passcode. Press the “Clear Passcode” button to clear the passcode. This will restart the APP, take the user to the End-User License Agreement, and have the user setup a new passcode. 18 JRVCS105 MOBILE DEVICES: IN-Command is able to pair to Android and iOS devices using the iN-Command App. Visit the Google Play and Apple App stores on your mobile device to download and use the iN-Command App. Seven mobile devices are able to be paired IN-Command at one time, but only 1 iOS and 3 Android devices are able to be actively paired at the same time; meaning, 3 Android devices and 1 iOS device can all actively control the IN-Command functions. To use another device not actively paired to IN-Command, 1 device needs to shut down its iN-Command App to allow another device to actively pair. To do this simply select the power button on the App, shut down the App in the device’s settings menu, or press “Disconnect” on the DC’s Connections page. 19 JRVCS105 Pairing a Mobile Device to DC 1. On the DC: 1.1 Push the “Pages” button 2 times. 1.3 Or press “Discover” for the DC to become “visible” to other devices for 300 seconds. Press “Allow”. 1.2 Select “ ”. Press “Scan” to start scanning for unpaired devices. 20 JRVCS105 2. On the Mobile Device: 2.1 Press “Bluetooth” on the “Setup” page to find the DC 2.2 The Mobile APP will scan for the DC device. device. 2.3 The DC will be displayed in the Unpaired Devices list in the format “JENSENDCXXXXXX”. Press the DC device in the list to pair with it. 21 JRVCS105 Setting the Floor Plan on the Mobile Device 3.1 On the DC, a request message will appear. Press “Pair” to start the BT pairing and 1.1 After Pairing the mobile Device, go to the settings menu on that device and select concurrently accept the pairing on the Mobile device. “Reset”. 3.2 The DC now shows the Mobile device is paired. 1.2 Select “Floor Plan”. This will change the home screen, configure the mobile device’s buttons, and populate the function list. 22 JRVCS105 CHECKING FOR AN ACTIVE BLUETOOTH SESSION 1. Push the “Pages” button 2 times and select the connections, or “ “, menu. This page shows the current Actively Paired handheld devices. To disconnect a handheld device, press “Disconnect”, or simply shut down the device’s app. This function is used to disconnect a device that is not actively being used, and to allow another device to be connected. 23 JRVCS105 SOFTWARE UPDATE* Software updates include floorplan redesigns and app version updates. 3. The Settings menu will appear. Press the “Update” button next to the Version, or “Select” next to Floor Plan. Insert USB drive with software update into the USB port located underneath the bottom right corner of the DC. The system will look for specific file names for software updates. 1. File name: “JRVCS1_AP Vxxxx.apk” DC APP update, (xxxx is version number) File name: “JRVCS1_CM Vxxxx.bin” BCM update, (xxxx is version number) File name: “update.zip” DC Android OS update File name: “xxxxxx.xml” Floor Plan update The system must be updated in the following order to prevent loss of communication between the DC and BCM. 2. 1. Update DC 2. Update BCM 3. Update APP Push the “Pages” button twice. Select the Settings, or “ “page. Enter the Engineering Passcode** 4. A confirmation screen will appear. Press “Update”, “Install”, or “OK” depending on the program being updated. The DC may restart. 24 JRVCS105 5.2 5.1 Ensure the updated program displays correctly After the update is completed, press the “Home” button, and then return the Settings Page *If a software update is needed, go to http://www.asaelectronics.com//in-command ** The Engineering Passcode is used by the manufacturer for programming and troubleshooting purposes. Should there be a software issue, call ASA Electronics Technical Support at 1-877-845-8750 or email them at info@asaelectronics.com 25 JRVCS105 Reset: Floor Plan 2. To reset the floor plan, removing customizations, press the “Pages” button twice. Select one of the two options to restore to a previous state. Current settings will be lost. - Floor Plan: restore to previous floor plan setting. - Factory: restore to default setting. 1. Select the Passcode page and enter the current passcode. 3. 26 Select “Floor Plan”. JRVCS105 SYSTEM CALIBRATION* 1. Push the “Pages” button 2 times and select the Settings Menu. Enter the Engineer Passcode.** 2. Scroll to the bottom of the page and select “Admin”. 3. Enter admin passcode to proceed.** 4. Select the device that needs to be calibrated. 27 JRVCS105 5. Select “Tanks” to set resistor reference value for every tank. 7. To calibrate the Touch Screen, select “Set”. Follow the instructions. The DC will restart after calibration. 6. After setting the values, return to previous screen and select “OK” to save the change. *The system should be calibrated by the manufacturer and only need to be accessed for troubleshooting. ** The Administration Passcode is used by the manufacturer for programming and troubleshooting purposes. Should there be a calibration issue, call ASA Electronics Technical Support at 1-877-845-8750 or email them at info@asaelectronics.com 28 JRVCS105 ASA Electronics Corporation www.asaelectronics.com www.jensenrvdirect.com ©2015 ASA Electronics Corporation 29
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Author : dorisgao Create Date : 2016:06:23 10:38:30+08:00 Modify Date : 2016:06:23 10:38:30+08:00 XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Producer : Acrobat Distiller 11.0 (Windows) Creator Tool : PScript5.dll Version 5.2.2 Format : application/pdf Title : Microsoft Word - JRVCS105 MANUAL 04112016 Creator : dorisgao Document ID : uuid:96cad49e-064b-4ca1-907e-f02d3f01a00a Instance ID : uuid:ea049985-8a81-48e0-b619-a2c121a65199 Page Count : 29EXIF Metadata provided by EXIF.tools