Sysgration JRVCS1CM JRVCS1 Body Control Module User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2729807
Application ID	wwWv3GyonlxdIXZetLvUHw==
Document Description	User_Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	123.59kB (1544827 bits)
Date Submitted	2015-08-28 00:00:00
Date Available	2015-08-28 00:00:00
Creation Date	2015-06-16 15:57:22
Producing Software	Acrobat Distiller 11.0 (Windows)
Document Lastmod	2015-06-16 15:57:22
Document Title	Microsoft Word - 4- JRVCS1_UserManual_1st draft_使用手冊
Document Creator	PScript5.dll Version 5.2.2
Document Author:	dorisgao

JRVCS1
RV CONTROL AND MONITORING SYSTEM
Installation and Operation Manual
JRVCS1
CONTENTS
CONTENTS ................................................................................................................................. ii
Introduction .................................................................................................................................. 4
Thank You! ............................................................................................................................ 4
Features ................................................................................................................................ 4
Precautions ........................................................................................................................... 4
Packing List .......................................................................................................................... 4
Installation .................................................................................................................................... 5
Tools and Supplies ................................................................................................................ 5
Disconnecting the Battery ..................................................................................................... 5
Selecting the Mounting Location ........................................................................................... 5
Mounting the Digital Commander (DC) ................................................................................. 5
Wiring ........................................................................................................................................... 6
Troubleshooting ........................................................................................................................... 9
Specifications ............................................................................................................................. 11
FCC Notes .......................................................................................................................... 11
ii
JRVCS1
iii
JRVCS1
INTRODUCTION
Thank You!
Packing List
Thank you for choosing a Jensen product. We hope you will find the instructions in this owner’s
manual clear and easy to follow. If you take a few minutes to look through it, you’ll learn how to
1 Cover, 2 Thumb Screws 1 Body Control Module (BCM)
use all the features of your new Jensen JRVCS1 for maximum enjoyment.
Features
Features of Jensen JRVCS1 system include:

Control four zones of lighting.

Monitor all water tank levels.

Control and monitor the Water Heater.

Control and monitor the Generator.
Precautions

Use the Proper Power Supply.
This product is designed to operate with a 12 volt DC, negative ground battery system (the
standard system in a North American vehicle).

Use Authorized Service Centers.
Do not attempt to disassemble or adjust this precision product; contact a professional for
assistance.

Avoid Moisture.
To reduce the risk of fire or electric shock, do not expose this equipment to rain or
moisture.

Avoid Cleaning Products.
The front of this unit should only be cleaned with a slightly damp cloth. Do not use
cleansers.

Use Recommended Accessories.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK AND ANNOYING
INTERFERENCE, USE ONLY THE RECOMMENDED ACCESSORIES.
1 Display Commander (DC)
JRVCS1
格式化: 字型: 粗體
INSTALLATION
格式化: 縮排: 左: 0.63 公分
It’s a good idea to read all of the instructions before beginning the installation. We recommend
having your Jensen JRVCS1 installed by a reputable RV dealership
Tools and Supplies
You will need these tools and supplies to install your JRVCS1:

Phillips screwdriver


Wire cutters and strippers
Electrical tape

Crimping tool

Volt meter/test light

Fork Crimp connectors

10 gauge wire for power and slide connections


14 and 18 gauge wire for all other connections
Four #8 PH (0.164” x 0.75”) screws for the DC

Six #8 PH (0.164” x 1.0”) screws for the BCM
CUTOUT FOR DISPLAY COMMANDER (DC)
Disconnecting the Battery
To prevent a short circuit, be sure to turn off 12V power and remove the negative (-) battery
cable prior to installation.
Selecting the Mounting Location
Select a mounting location, taking care to avoid the following:

Places exposed to heat-radiating appliances such as electric heaters

Adjacent to other equipment that radiates heat

Poorly-ventilated or dusty places

Moist or humid locations
NOTE: Before cutting the mounting hole, make sure the area behind the mounting
location is clear of wires, fuel and vacuum or water lines.
Mounting the Display Commander (DC)

Use the mounting hole diagram to measure and cut a mounting hole

Route power wires through the hole and connect


Check and ensure correct operation
Mount the unit using four #8 PH (0.164” x 0.75”) screws

Attach Trim ring.

格式化: 左 0 字元
JRVCS1
24
LIGHT ORANGE
SECURITY LIGHTS +
(IN)
(14)
WIRING
The wiring diagram depicts all the wiring connections required for proper operation of the unit.
25
WHITE
26
ORANGE
27
LIGHT ORANGE
(14)
(14)
SECURITY LIGHTS -
(IN/OUT)
SECURITY LIGHTS +
(OUT)
AWNING LIGHTS +
(OUT)
AWNING LIGHTS -
(OUT)
(14)
28
LIGHT WHITE
(14)
DETAIL A
BODY CONTROL MODULE (BCM) CONNECTIONS
PIN NO.
WIRE COLOR/SIZE
DESCRIPTION
BLUE
(18)
FRESH TANK 1
(IN)
FRESH TANK 2
(IN)
BROWN
(18)
BLACK TANK 1
(IN)
LIGHT BLUE
(18)
BLACK TANK 2
(IN)
GRAY
(18)
GRAY TANK 1
(IN)
RED
(18)
GRAY TANK 2
(IN)
LIGHT BLUE
(18)
GRAY TANK 3
(IN)
WHITE
(18)
TANK SENSOR GROUND
(IN)
GREEN
(14)
LIGHT GROUP 1 +
(IN)
10
WHITE
(14)
LIGHT GROUP 1 -
DETAIL A
BODY CONTROL MODULE (BCM) CONNECTIONS
34
BLUE
(18)
GEN SERVICE +12V
(IN)
(OUT)
35
ORANGE
(18)
GEN HOUR METER +12V
(IN)
(IN)
36
BLACK
GEN FUEL TANK LEVEL
(IN)
(IN/OUT)
37
RED(14)/BROWN (18)
GEN GROUND
38
GRAY
(16)
LANDING GEAR +12V
39
WHITE
(16)
LANDING GEAR GROUND (OUT)
40
GRAY
(16)
HYDRAULIC VALVE EXTEND
41
WHITE
(16)
HYDRAULIC VALVE RETRACT
42
GRAY
(16)
HYDRAULIC VALVE +12V
43
WHITE
(16)
(14)
LIGHT GROUP 2 -
14
GREEN
(14)
LIGHT GROUP 2 +
15
GREEN
(14)
LIGHT GROUP 3 +
16
WHITE
(14)
LIGHT GROUP 3 –
17
GREEN
(14)
LIGHT GROUP 3 +
(OUT)
18
GREEN
(14)
LIGHT GROUP 4 +
19
LIGHT WHITE
PIN NO.
(OUT)
(IN)
(IN)
(IN/OUT)
(14)
(OUT)
(14)
WHITE
23
LIGHT ORANGE
(14)
(OUT)
(18)LIGHT
(IN/OUT)
WHITE
22
(OUT)
GEN START +12V
DESCRIPTION
13
(14)
AUX TRIGGER 1
RED
GEN PRIME/STOP +12V
LIGHT GROUP 2 +
ORANGE
LIGHT
32
(18)
LIGHT GROUP 1 +
(14)
21
31
WIRE COLOR/SIZE
(14)
GREEN
LIGHT GROUP 4 +
(OUT)
GREEN
GREEN
LIGHT GREEN
(IN)
AUX FUEL TANK -
33
11
20
AUX FUEL TANK +
30
(IN/OUT)
12
LIGHT GROUP 4 -
29
(14)
(OUT)
(OUT)
HYDRAULIC VALVE GROUND
EXTERIOR LIGHTS +
(IN)
44
AUX TRIGGER 2
(OUT)
EXTERIOR LIGHTS -
(IN/OUT)
45
AUX TRIGGER 3
(OUT)
EXTERIOR LIGHTS +
(OUT)
46
AUX TRIGGER 4
(OUT)
47
AUX TRIGGER 5
(OUT)
(14)
JRVCS1
48
AUX TRIGGER 6
(OUT)
49
AUX TRIGGER 7
(OUT)
50
AUX TRIGGER 8
(OUT)
51
BROWN
52
W HITE
(18)
LOCKOUT SIGNAL +12V
(IN)
WATER HEATER GROUND
(18)
53
BROWN
(18)
WATER HEATER ON (GAS)
54
ORANGE
(18)
WATER HEATER ON (ELECTRIC)
55
PINK
(18)
WATER HEATER FAULT
56
BLUE
(14)
WATER PUMP +12V
(OUT)
57
WHITE
(14)
WATER PUMP -12V
(IN/OUT)
58
BLUE
(14)
WATER PUMP +12V
(OUT)
59
WHITE
(14)
AWNING 2 -12V
(OUT)
60
YELLOW
(14)
AWNING 2 +12V
(OUT)
61
WHITE
(14)
AWNING 1 -12V
(OUT)
62
YELLOW
(14)
AWNING 1 +12V
(OUT)
(10)
REAR JACKS
(OUT)
REAR JACKS
(OUT)
63
64
(10)
BODY CONTROL MODULE (BCM) CONNECTIONS
PIN NO.
WIRE COLOR/SIZE
DESCRIPTION
65
(10)
FRONT JACKS
(OUT)
66
(10)
FRONT JACKS
(OUT)
67
WHITE
(10)
ELECTRIC SLIDE 5 -12V
68
PURPLE
(10)
ELECTRIC SLIDE 5 +12V (OUT)
(OUT)
69
WHITE
(10)
ELECTRIC SLIDE 4 -12V
70
PURPLE
(10)
ELECTRIC SLIDE 4 +12V (OUT)
71
WHITE
(10)
ELECTRIC SLIDE 3 -12V
72
PURPLE
(10)
ELECTRIC SLIDE 3 +12V (OUT)
73
WHITE
(10)
ELECTRIC SLIDE 2 -12V
74
PURPLE
(10)
ELECTRIC SLIDE 2 +12V (OUT)
75
WHITE
(10)
ELECTRIC SLIDE 1 -12V
76
PURPLE
(10)
ELECTRIC SLIDE 1 +12V (OUT)
77
BLACK
(10)
CHASSIE GROUND
(IN)
78
YELLOW
(14)
AWNING +12V
(IN)
79
PURPLE
(10)
ELECTRIC SLIDE +12V
(IN)
80
RED
(10)
BCM +12V
(IN)
(OUT)
(OUT)
(OUT)
(OUT)
JRVCS1
SETUP MENU LIST
JRVCS1
ITEM
GENERATOR
SELECTION
PROPANE OR GAS
SLIDE 1
ELECTRIC OR HYDRAULIC
SLIDE 2
ELECTRIC OR HYDRAULIC
SLIDE 3
ELECTRIC OR HYDRAULIC
SLIDE 4
ELECTRIC OR HYDRAULIC
SLIDE 5
ELECTRIC OR HYDRAULIC
TRIGGER 1
MOMENTARY OR LATCH
TRIGGER 2
MOMENTARY OR LATCH
TRIGGER 3
MOMENTARY OR LATCH
TRIGGER 4
MOMENTARY OR LATCH
TRIGGER 5
MOMENTARY OR LATCH
TRIGGER 6
MOMENTARY OR LATCH
TRIGGER 7
MOMENTARY OR LATCH
TRIGGER 8
MOMENTARY OR LATCH
FRONT JACKS
ELECTRIC OR HYDRAULIC
REAR JACKS
ELECTRIC OR HYDRAULIC
JRVCS1
TROUBLESHOOTING
Symptom
Solution
DC will not turn ON or No
front panel operation
Try the ON/OFF button.
Check main fuse in Distribution Panel.
Check 12V+ on wire to DC (RED wire).
Check Ground wire to DC.
Check the Red power LED is off,
Check the fuse in the Distribution Panel.
Check 12V+ on wire at pin 80.
Check Ground wire at pin 77.
No Power to the Body
Control Module (BCM)
10
JRVCS1
SPECIFICATIONS
FCC Notes
Display Commander (DC)
Operating Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12vdc
WARNING! Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
Maximum Current Draw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 600ma@12vdc
Minimum Operating Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . …9vdc
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
Maximum Operating Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16vdc
Body Control Module (BCM)
Operating Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12vdc
Maximum Current Draw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 600ma@12vdc
This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
Minimum Operating Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9vdc
Maximum Operating Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16vdc
communications.
JRVCS1 System
However, there is no guarantee that interference will not occur in a particular installation. If this
EPROM Non-Volatile Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . YES
equipment does cause harmful interference to radio or television reception, which can be
Bluetooth Version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.0 BLE
determined by turning the equipment off and on, the user is encouraged to try to correct the
General
interference by one or more of the following measures:
Body Control Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14.7” (W) x 17.87” (D) x1855mm
1.75” (H)



Display Commander . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 195mm (W) x 132mm (D) x36.5mm
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
(H)

11
Consult the dealer or an experienced radio/TV technician for help.
格式化: 置中
格式化: 靠右
SETUP
 Text Editing
1. Select “setup”
2. Long press “Awning1”
3. A device rename window will open. Press “OK” after completing the text editing.
SETUP
 Scroll List Editing
1. Select “setup”
2. Press the “Δ icon before the device name and move the device to a new location, “Electric Slide 1” as an example.
SETUP
 Triggers
1. Triggers 1 through 8 can be added to the system.
2 Either “Momentary” or “Latch” can be selected for each Trigger.
SETUP
Tanks
1. Fresh water tanks, Black water tanks and Gray water tanks can be added to the system,
SETUP
Lights
1. Light Groups can be added to the system,
SETUP
Slides
1. Slides can be added to the system,
SETUP
Awnings
1. Awnings can be added to the system,
SETUP
Jacks
1. Jacks can be added to the system,
SETUP
 Passcode
1. Select “Setup”.
2. Press “Lock” to enter passcode setup.
3. The passcode setup window will open. (DEFAULT FACTORY SETTING IS “ON”)
3.1 Turn on Passcode Protection
3.1.1. Press “On” to turn on passcode protection. The system will request a passcode. (5391)
3.1.2. Select the idle time to activate the passcode protection.
3.1.3 Passcode protection is activated.
3.2 Turn OFF Passcode protection
3.2.1. When passcode protection is ON, press “On” button to turn off passcode protection
3.2.2. Read the passcode ”Off” disclaimer statement and press “Accept” to proceed.
3.2.3 Enter passcode to proceed
3.2.4. Passcode protection is now turned off.
3.3 Change Passcode
3.3.1. Press the “Edit” button to change to a new passcode.
3.3.2. Enter the old passcode.
3.3.3. Enter the new passcode.
3.3.4. Confirm new passcode.
PAIRING INSTRUCTIONS
DC to BCM
1. Select “Setup”
2. Select “Maintain”
3. Currently, it shows no Bluetooth Low Energy device connected to this DC. Press the “Select” button across from the “BLE Device”.
4. The DC will find and list all available devices.
5.
Press the target BCM to connect, “JENSENBCM 037EA0” as an example.
6. The DC will automatically return to the previous page and show the paired BCM.
7. Press the hot key to exit the “Maintain” setup page and the DC will start to connect to the selected BCM.
BCM to DC
BLE connection is activated by the DC. The BCM only needs to power up. There is no action needed from the BCM.
PAIRING INSTRUCTIONS
1. DC side.
1.1 Select “Setup”.
1.2. Select “Bluetooth”.
 Mobile Device to DC
1.3. Currently, it shows no BT paired device connected to this DC. Press the “Discover” button to activate the BT pairing mode.
1.4. Press “Allow”.
2. Mobile Device side.
2.1 Press “Bluetooth” on the “Setup” page to find the DC device.
2.2. The Mobile APP will scan for the DC device.
2.3. Find the “DC” in the unpaired device list. Press “DC device” to pair with it.
3.2 The DC now shows the Mobile device is paired.
Software Update
1. Select “Setup”.
2. Attach the update software USB Drive before selecting “Maintain”.
3. The system will look for specific file names for software updates and turn on “Select” action buttons accordingly.
‐ File name: “JRVCS1_AP Vxxxx.apk”
 DC APP update, (xxxx is version number)
‐ File name: “JRVCS1_CM Vxxxx.bin”
 BCM
‐ File name: “update.zip”
update, (xxxx is version number)
 DC Android OS update
3.1. Press the APP “Update” button to update DC APP.
3.2. Press the BCM “Update” button to update the BCM firmware.
3.3 Press the DC “Update” button to update DC Android OS.
Reset
 Floor Plan
1. Select “Setup”.
2. Press “Default” to restore the system to previous settings.
3. Select “Floor Plan” to restore the previous floor plan setting. Current settings will be lost.
4. Select “Factory” to restore back to ASA default settings. Current settings will be lost.
ASA Electronics Corporation
www.asaelectronics.com
www.jensenrvdirect.com
©2015 ASA Electronics Corporation

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : dorisgao
Create Date                     : 2015:06:16 15:57:22+08:00
Modify Date                     : 2015:06:16 15:57:22+08:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Format                          : application/pdf
Title                           : Microsoft Word - 4- JRVCS1_UserManual_1st draft_使用手冊
Creator                         : dorisgao
Creator Tool                    : PScript5.dll Version 5.2.2
Producer                        : Acrobat Distiller 11.0 (Windows)
Document ID                     : uuid:78f70f56-d915-47ff-bfc5-4fa77fec0b11
Instance ID                     : uuid:d3ee5c60-b23e-4d03-9457-558413cd1105
Page Count                      : 63

EXIF Metadata provided by EXIF.tools