Sysgration JRVCS1DC JRVCS1 Display Commander User Manual

Sysgration Ltd. JRVCS1 Display Commander User Manual

User_Manual

JRVCS1 RV CONTROL AND MONITORING SYSTEM Installation and Operation Manual
JRVCS1 ii CONTENTS CONTENTS ................................................................................................................................. iiIntroduction .................................................................................................................................. 4Thank You!............................................................................................................................ 4Features................................................................................................................................ 4Precautions ........................................................................................................................... 4Packing List .......................................................................................................................... 4Installation .................................................................................................................................... 5Tools and Supplies................................................................................................................ 5Disconnecting the Battery..................................................................................................... 5Selecting the Mounting Location........................................................................................... 5Mounting the Digital Commander (DC)................................................................................. 5Wiring ........................................................................................................................................... 6Troubleshooting ........................................................................................................................... 7Specifications ............................................................................................................................... 9FCC Notes..........................................................................................................................10
JRVCS1 iii
JRVCS1 4 INTRODUCTION Thank You! Thank you for choosing a Jensen product. We hope you will find the instructions in this owner’s manual clear and easy to follow. If you take a few minutes to look through it, you’ll learn how to use all the features of your new Jensen JRVCS1 for maximum enjoyment. Features Features of Jensen JRVCS1 system include:  Control four zones of lighting.  Monitor all water tank levels.  Control and monitor the Water Heater.  Control and monitor the Generator. Precautions  Use the Proper Power Supply. This product is designed to operate with a 12 volt DC, negative ground battery system (the standard system in a North American vehicle).  Use Authorized Service Centers. Do not attempt to disassemble or adjust this precision product; contact a professional for assistance.  Avoid Moisture. To reduce the risk of fire or electric shock, do not expose this equipment to rain or moisture.  Avoid Cleaning Products. The front of this unit should only be cleaned with a slightly damp cloth. Do not use cleansers.  Use Recommended Accessories. TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK AND ANNOYING INTERFERENCE, USE ONLY THE RECOMMENDED ACCESSORIES. Packing List 1 Cover, 2 Thumb Screws 1 Body Control Module (BCM) 1 Display Commander (DC)
JRVCS1 5 INSTALLATION It’s a good idea to read all of the instructions before beginning the installation. We recommend having your Jensen JRVCS1 installed by a reputable RV dealership Tools and Supplies You will need these tools and supplies to install your JRVCS1:  Phillips screwdriver  Wire cutters and strippers  Electrical tape  Crimping tool  Volt meter/test light  Fork Crimp connectors  10 gauge wire for power and slide connections  14 and 18 gauge wire for all other connections  Four #8 PH (0.164” x 0.75”) screws for the DC  Six #8 PH (0.164” x 1.0”) screws for the BCM Disconnecting the Battery To prevent a short circuit, be sure to turn off 12V power and remove the negative (-) battery cable prior to installation. Selecting the Mounting Location Select a mounting location, taking care to avoid the following:  Places exposed to heat-radiating appliances such as electric heaters  Adjacent to other equipment that radiates heat  Poorly-ventilated or dusty places  Moist or humid locations Mounting the Display Commander (DC)  Use the mounting hole diagram to measure and cut a mounting hole  Route power wires through the hole and connect  Check and ensure correct operation  Mount the unit using four #8 PH (0.164” x 0.75”) screws  Attach Trim ring CUTOUT FOR DISPLAY COMMANDER (DC) NOTE: Before cutting the mounting hole, make sure the area behind the mounting location is clear of wires, fuel and vacuum or water lines. 格式化: 字型: 粗體格式化: 左 0 字元刪除:刪除:刪除:.刪除:
JRVCS1 6 WIRING The wiring diagram depicts all the wiring connections required for proper operation of the unit. BODY CONTROL MODULE (BCM) CONNECTIONS PIN NO. WIRE COLOR/SIZE DESCRIPTION 1 BLUE (18) FRESH TANK 1 (IN)2 FRESH TANK 2 (IN)3 BROWN (18) BLACK TANK 1 (IN)4 LIGHT BLUE (18) BLACK TANK 2 (IN)5 GRAY (18) GRAY TANK 1 (IN)6 RED (18) GRAY TANK 2 (IN)7 LIGHT BLUE (18) GRAY TANK 3 (IN)8 WHITE (18) TANK SENSOR GROUND (IN)9 GREEN (14) LIGHT GROUP 1 + (IN)10 WHITE (14) LIGHT GROUP 1 - (IN/OUT)11 GREEN (14) LIGHT GROUP 1 + (OUT)12 GREEN (14) LIGHT GROUP 2 + (IN)13 WHITE (14) LIGHT GROUP 2 - (IN/OUT)14 GREEN (14) LIGHT GROUP 2 + (OUT)15 GREEN (14) LIGHT GROUP 3 + (IN)16 WHITE (14) LIGHT GROUP 3 – (IN/OUT)17 GREEN (14) LIGHT GROUP 3 + (OUT)18 GREEN (14) LIGHT GROUP 4 + (IN)19 WHITE (14) LIGHT GROUP 4 - (IN/OUT)20 GREEN (14) LIGHT GROUP 4 + (OUT)21 ORANGE (14) EXTERIOR LIGHTS + (IN)22 WHITE (14) EXTERIOR LIGHTS - (IN/OUT)23 ORANGE (14) EXTERIOR LIGHTS + (OUT)24 ORANGE (14) SECURITY LIGHTS + (IN)25 WHITE (14) SECURITY LIGHTS - (IN/OUT)26 ORANGE (14) SECURITY LIGHTS + (OUT)27 ORANGE (14) AWNING LIGHTS + (OUT)28 WHITE (14) AWNING LIGHTS - (OUT)29 AUX FUEL TANK + (IN) 30 AUX FUEL TANK - (OUT)31 AUX TRIGGER 1 (OUT)32 RED (18) GEN START +12V (OUT) BODY CONTROL MODULE (BCM) CONNECTIONS PIN NO. WIRE COLOR/SIZE DESCRIPTION 33 GREEN (18) GEN PRIME/STOP +12V (OUT)34 BLUE (18) GEN SERVICE +12V (IN)35 ORANGE (18) GEN HOUR METER +12V (IN)36 BLACK (14) GEN FUEL TANK LEVEL (IN)37 RED(14)/BROWN (18) GEN GROUND 38 GRAY (16) LANDING GEAR +12V (OUT)39 WHITE (16) LANDING GEAR GROUND (OUT)40 GRAY (16) HYDRAULIC VALVE EXTEND 41 WHITE (16) HYDRAULIC VALVE RETRACT 42 GRAY (16) HYDRAULIC VALVE +12V 43 WHITE (16) HYDRAULIC VALVE GROUND 44 AUX TRIGGER 2 (OUT)45 AUX TRIGGER 3 (OUT)46 AUX TRIGGER 4 (OUT)47 AUX TRIGGER 5 (OUT)48 AUX TRIGGER 6 (OUT)49 AUX TRIGGER 7 (OUT)50 AUX TRIGGER 8 (OUT)51 BROWN (18) LOCKOUT SIGNAL +12V (IN)52 WHITE (18) WATER HEATER GROUND 53 BROWN (18) WATER HEATER ON (GAS) 54 ORANGE (18) WATER HEATER ON (ELECTRIC)55 PINK (18) WATER HEATER FAULT 56 BLUE (14) WATER PUMP +12V (OUT)57 WHITE (14) WATER PUMP -12V (IN/OUT)58 BLUE (14) WATER PUMP +12V (OUT)59 WHITE (14) AWNING 2 -12V (OUT)60 YELLOW (14) AWNING 2 +12V (OUT)61 WHITE (14) AWNING 1 -12V (OUT)62 YELLOW (14) AWNING 1 +12V (OUT)63 (10) REAR JACKS (OUT)64 (10) REAR JACKS (OUT) 刪除:DETAIL A刪除:DETAIL A刪除: 刪除:LIGHT 刪除:LIGHT 刪除:LIGHT 刪除:LIGHT 刪除:LIGHT 刪除:LIGHT 刪除:LIGHT 刪除:LIGHT ... [1]... [2]
JRVCS1 7 BODY CONTROL MODULE (BCM) CONNECTIONS PIN NO. WIRE COLOR/SIZE DESCRIPTION 65 (10) FRONT JACKS (OUT) 66 (10) FRONT JACKS (OUT) 67 WHITE (10) ELECTRIC SLIDE 5 -12V (OUT)68 PURPLE (10) ELECTRIC SLIDE 5 +12V (OUT)69 WHITE (10) ELECTRIC SLIDE 4 -12V (OUT)70 PURPLE (10) ELECTRIC SLIDE 4 +12V (OUT)71 WHITE (10) ELECTRIC SLIDE 3 -12V (OUT)72 PURPLE (10) ELECTRIC SLIDE 3 +12V (OUT)73 WHITE (10) ELECTRIC SLIDE 2 -12V (OUT)74 PURPLE (10) ELECTRIC SLIDE 2 +12V (OUT)75 WHITE (10) ELECTRIC SLIDE 1 -12V (OUT)76 PURPLE (10) ELECTRIC SLIDE 1 +12V (OUT)77 BLACK (10) CHASSIE GROUND (IN)78 YELLOW (14) AWNING +12V (IN)79 PURPLE (10) ELECTRIC SLIDE +12V (IN)80 RED (10) BCM +12V (IN) SETUP MENU LIST ITEM SELECTION GENERATOR PROPANE OR GAS 刪除:分頁符號
JRVCS1 8 SLIDE 1 ELECTRIC OR HYDRAULIC SLIDE 2 ELECTRIC OR HYDRAULIC SLIDE 3 ELECTRIC OR HYDRAULIC SLIDE 4 ELECTRIC OR HYDRAULIC SLIDE 5 ELECTRIC OR HYDRAULIC TRIGGER 1 MOMENTARY OR LATCH TRIGGER 2 MOMENTARY OR LATCH TRIGGER 3 MOMENTARY OR LATCH TRIGGER 4 MOMENTARY OR LATCH TRIGGER 5 MOMENTARY OR LATCH TRIGGER 6 MOMENTARY OR LATCH TRIGGER 7 MOMENTARY OR LATCH TRIGGER 8 MOMENTARY OR LATCH FRONT JACKS ELECTRIC OR HYDRAULIC REAR JACKS ELECTRIC OR HYDRAULIC TROUBLESHOOTING Symptom Solution Try the ON/OFF button. Check main fuse in Distribution Panel. Check 12V+ on wire to DC (RED wire). DC will not turn ON or No front panel operation Check Ground wire to DC. Check the Red power LED is off, No Power to the Body Control Module (BCM) Check the fuse in the Distribution Panel.
JRVCS1 9 Check 12V+ on wire at pin 80. Check Ground wire at pin 77. SPECIFICATIONS Display Commander (DC) Operating Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12vdc Maximum Current Draw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 600ma@12vdc Minimum Operating Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . …9vdc Maximum Operating Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16vdc Body Control Module (BCM) Operating Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12vdc Maximum Current Draw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 600ma@12vdc Minimum Operating Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9vdc Maximum Operating Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16vdc JRVCS1 System EPROM Non-Volatile Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . YES Bluetooth Version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.0 BLE General
JRVCS1 10 Body Control Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14.7” (W) x 17.87” (D) x 1.75” (H) Display Commander . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 195mm (W) x 132mm (D) x36.5mm (H) FCC Notes WARNING! Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:  Reorient or relocate the receiving antenna.  Increase the separation between the equipment and receiver.  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  Consult the dealer or an experienced radio/TV technician for help.格式化: 置中格式化: 靠右刪除:1855mm 刪除:
SETUPTextEditing1.Select“setup”2.Longpress“Awning1”
3.Adevicerenamewindowwillopen.Press“OK”aftercompletingthetextediting.

SETUPScrollListEditing1.Select“setup”2.Pressthe“Δiconbeforethedevicenameandmovethedevicetoanewlocation,“ElectricSlide1”asanexample.
SETUPTriggers1.Triggers1through8canbeaddedtothesystem.
2Either“Momentary”or“Latch”canbeselectedforeachTrigger.
SETUPTanks1.Freshwatertanks,BlackwatertanksandGraywatertankscanbeaddedtothesystem,

SETUPLights1.LightGroupscanbeaddedtothesystem,
SETUPSlides1.Slidescanbeaddedtothesystem,
SETUPAwnings1.Awningscanbeaddedtothesystem,
SETUPJacks1.Jackscanbeaddedtothesystem,
SETUPPasscode1.Select“Setup”.2.Press“Lock”toenterpasscodesetup.
3.Thepasscodesetupwindowwillopen.(DEFAULTFACTORYSETTINGIS“ON”)
3.1TurnonPasscodeProtection3.1.1.Press“On”toturnonpasscodeprotection.Thesystemwillrequestapasscode.(5391)
3.1.2.Selecttheidletimetoactivatethepasscodeprotection.
3.1.3Passcodeprotectionisactivated.
3.2TurnOFFPasscodeprotection3.2.1.WhenpasscodeprotectionisON,press“On”buttontoturnoffpasscodeprotection
3.2.2.Readthepasscode”Off”disclaimerstatementandpress“Accept”toproceed.
3.2.3Enterpasscodetoproceed3.2.4.Passcodeprotectionisnowturnedoff.
3.3ChangePasscode3.3.1.Pressthe“Edit”buttontochangetoanewpasscode.
3.3.2.Entertheoldpasscode.
3.3.3.Enterthenewpasscode.

3.3.4.Confirmnewpasscode.  PAIRINGINSTRUCTIONS
DCtoBCM1.Select“Setup”2.Select“Maintain”
3.Currently,itshowsnoBluetoothLowEnergydeviceconnectedtothisDC.Pressthe“Select”buttonacrossfromthe“BLEDevice”.
4.TheDCwillfindandlistallavailabledevices.
5.PressthetargetBCMtoconnect,“JENSENBCM037EA0”asanexample.6.TheDCwillautomaticallyreturntothepreviouspageandshowthepairedBCM.
7.Pressthehotkeytoexitthe“Maintain”setuppageandtheDCwillstarttoconnecttotheselectedBCM.
BCMtoDCBLEconnectionisactivatedbytheDC.TheBCMonlyneedstopowerup.ThereisnoactionneededfromtheBCM.
PAIRINGINSTRUCTIONSMobileDevicetoDC1.DCside.1.1Select“Setup”.1.2.Select“Bluetooth”.
1.3.Currently,itshowsnoBTpaireddeviceconnectedtothisDC.Pressthe“Discover”buttontoactivatetheBTpairingmode.
1.4.Press“Allow”.
2.MobileDeviceside.2.1Press“Bluetooth”onthe“Setup”pagetofindtheDCdevice.
2.2.TheMobileAPPwillscanfortheDCdevice.
2.3.Findthe“DC”intheunpaireddevicelist.Press“DCdevice”topairwithit.

3.2TheDCnowshowstheMobiledeviceispaired.SoftwareUpdate1.Select“Setup”.
2.AttachtheupdatesoftwareUSBDrivebeforeselecting“Maintain”.
3.Thesystemwilllookforspecificfilenamesforsoftwareupdatesandturnon“Select”actionbuttonsaccordingly.‐Filename:“JRVCS1_APVxxxx.apk”DCAPPupdate,(xxxxisversionnumber)‐Filename:“JRVCS1_CMVxxxx.bin”BCMupdate,(xxxxisversionnumber)‐Filename:“update.zip”DCAndroidOSupdate

3.1.PresstheAPP“Update”buttontoupdateDCAPP.
3.2.PresstheBCM“Update”buttontoupdatetheBCMfirmware.

3.3PresstheDC“Update”buttontoupdateDCAndroidOS.

ResetFloorPlan1.Select“Setup”.2.Press“Default”torestorethesystemtoprevioussettings.
3.Select“FloorPlan”torestorethepreviousfloorplansetting.Currentsettingswillbelost.
4.Select“Factory”torestorebacktoASAdefaultsettings.Currentsettingswillbelost.

ASA Electronics Corporation www.asaelectronics.com www.jensenrvdirect.com ©2015 ASA Electronics Corporation

Navigation menu