Sysgration WVTX1AP Stand Alone Digital Wireless Transmitter User Manual 1

Sysgration Ltd. Stand Alone Digital Wireless Transmitter 1

User Manual

WVTX1AP INSTALLATIONConnect to cameraBlack Ground InputRed +12VDC InputMounting screws x4Antenna Aligned Vertically(Perpendicular to Road)RWVTX1APAuto PairDigital WirelessTransmitter Module1. Mount the transmitter using 4 screws in a safe location to avoid impacts.2. Connect 12 volts to the red wire and chassis ground to the black wire.3. Connect the camera cable.4. Secure all wires & cables. technology with Auto-PairDigital wireless Transmitter Featuring ObservationSystemsMA2A1209002-1R Our wireless technology operates at nearly the same performance level as a wired system. However, slight delays and signal reductions are possible due to application or environmental factors.? To comply with the FCC RF exposure compliance requirements, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. No change to the antenna or the device is permitted. Any change to the antenna or the device could result in the device exceeding the RF exposure requirements and void user's authority to operate the device. IMPORTANT NOTE:Notice 1 :The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.Notice 2:PATENT PENDING

Navigation menu