Systems and Technology STAVL0637 GSM Modem User Manual IntelliTrac X Series Protocol
Systems & Technology Corp. GSM Modem IntelliTrac X Series Protocol
Manual
IntelliTrac X1 User ’s Manual Version: Date: Status: 1.3 Mar 27, 2006 Preliminary © Systems & Technology Corp. All rights reserved. General notes With respect to any damages arising in operation with the described product or this document, S&T shall be liable according to the General Conditions on which the delivery of the described product and this document are based. This product is not intended for use in life support appliances, devices or systems where a malfunction of the product can reasonably be expected to result in personal injury. S&T customers using or selling this product for use in such applications do so at their own risk and agree to fully indemnify S&T for any damages resulting from illegal use or resale. Information in this document is subject to change without notice at any time. Copyright notice Copying of this document and giving it to others and the use or communication of the contents thereof, are forbidden without express authority. Offenders are liable to the payment of damages. © Systems & Technology Corp. All rights reserved © Systems & Technology Corp. All rights reserved. IntelliTrac X1 User’s Manual Table Of Contents Features ...................................................................................................................................1 System Requirements .............................................................................................................1 Product Contents ....................................................................................................................1 Hardware Installation ............................................................................................................2 4.1 4.2 4.3 Software Installation ..............................................................................................................4 5.1 5.2 Configuration Software ................................................................................................................ 4 Firmware Download Software...................................................................................................... 5 Specifications...........................................................................................................................6 Electrical, reliability and radio characteristics....................................................................6 7.1 7.2 7.3 7.4 7.5 Install SIM card ............................................................................................................................ 2 Install Cables................................................................................................................................ 2 Mounting the unit ......................................................................................................................... 3 Absolute maximum ratings........................................................................................................... 6 Operating temperatures ............................................................................................................... 6 GSM/GPRS Output Power........................................................................................................... 7 GSM/GPRS Receive sensitivity ................................................................................................... 7 GSM/GPRS receive/transmit frequency ...................................................................................... 7 LED Indicators .......................................................................................................................8 About Systems & Technology Corporation..........................................................................9 © Systems & Technology Corp. All rights reserved. IntelliTrac X1 User’s Manual 1 Features 16 channels GPS receiver with high sensitivity up to –152dBm Quad-band GSM/GPRS (850 / 900 / 1800 / 1900 MHz) solution Intelligent real time tracking mode High capacity Li-Polymer backup battery Advanced power management Journey logging for thousands position Remote configuration and firmware upgrade 2 System Requirements The IntelliTrac X1 configuration software is based on Microsoft Windows systems. Windows Systems:Win98/Me/2000/XP 3 Product Contents IntelliTrac X1 device Power I/O Cable Serial Cable GPS Receiver GSM/GPRS Antenna Holding Bridles CD (User manual & Software) © Systems & Technology Corp. All rights reserved. -1- IntelliTrac X1 User’s Manual 4 Hardware Installation 4.1 Install SIM card Press the yellow button to enject the SIM card holder and insert the SIM card. If you would like to disable the PIN code, please use general GSM cellular phone to disable the PIN code in advance. 4.2 Install Cables Install I/O cable The I/O cable is a 10-wires cable which include power and positive/negative inputs and outputs. The I/O cable pins assignment shown below : Pin Number 10 Description DC power source ( 8V ~ 30V ) Ground Input1 (ACC Positive trigger input) Output1 Input2 (Positive trigger) Output2 Input3 Output3 Input4 Output4 (Internal 2A Relay) © Systems & Technology Corp. All rights reserved. -2- IntelliTrac X1 User’s Manual Install GSM Antenna Connect the GSM antenna to the SMA connector with lable “GSM”. Install GPS Receiver Connect the GPS receiver to the Mini DIN connector with label “GPS”. Use a nylon cable tie to prevent unexpected come off. Install RF Receiver (Optional) Connect the RF receiver ti the 3 pins connector with label “RF”. 4.3 Mounting the unit For mounting the unit, bind to the body the holding bridles according the the schema below : © Systems & Technology Corp. All rights reserved. -3- IntelliTrac X1 User’s Manual 5 Software Installation 5.1 Configuration Software © Systems & Technology Corp. All rights reserved. -4- IntelliTrac X1 User’s Manual 5.2 Firmware Download Software © Systems & Technology Corp. All rights reserved. -5- IntelliTrac X1 User’s Manual 6 Specifications Dimension Weight Input Ports Output Ports GPS Datum GPS Frequency GPS Channel GPS Tracking sensitivity GPS Cold Start GPS Warm Start GPS Hot Start GPS Update Rate GPS Accuracy GPS Baud Rate GSM/GPRS Frequency GPRS SMS Data mode Voice mode 90mm x 70mm x 30mm 250g 4 Inputs (2 positive, 2 negative) 4 Outputs (4 negative trigger) WGS-84 L1, 1575.42MHz 16 -152dBm typ. 40secs 25secs 3secs 1Hz 3m CEP (50%), 7m (90%) 19200bps Quad-Band 850/900/1800/1900MHz Multi-slot class 10 PDU mode CS Data HR/FR/EFR 7 Electrical, reliability and radio characteristics 7.1 Absolute maximum ratings Absolute maximum rating for power supply and voltage on digital input pins of the IntelliTrac X1 are list in following table: Parameter Supply Voltage Positive trigger Input Voltage Positive trigger Input current Negative trigger Input Voltage Output current Relay output current Power current consumption (Standby mode) Power current consumption (GPS Off mode) Power current consumption (Deep sleep mode) 7.2 Min 35 40 24 15 Max 30 30 0.7 400 45 26 15 Unit uA mA mA @ 12VDC mA @ 12VDC mA @ 12VDC Operating temperatures The operating temperature is listed in following table: Parameter Ambient temperature Restricted temperature* Storage Temperature Min Typ -20 25 -20 ~ -40 -40 Max 55 55 ~ 85 85 Unit ℃ ℃ ℃ *The IntelliTrac X1 device can work, but the deviation from the specification may occur. © Systems & Technology Corp. All rights reserved. -6- IntelliTrac X1 User’s Manual 7.3 GSM/GPRS Output Power Parameter GSM850 E-GSM900 DCS1800 PCS1900 7.4 Max Unit dBm dBm dBm dBm Min <-106 <-106 <-104 <-104 Max Unit dBm dBm dBm dBm GSM/GPRS Receive sensitivity Parameter GSM850 E-GSM900 DCS1800 PCS1900 7.5 Min 33 33 30 30 GSM/GPRS receive/transmit frequency Parameter GSM850 E-GSM900 DCS1800 PCS1900 Receive 869 ~ 894 MHz 925 ~ 960 MHz 1805 ~ 1880 MHz 1930 ~ 1990 MHz © Systems & Technology Corp. All rights reserved. -7- Transmit 824 ~ 849 MHz 880 ~ 915 MHz 1710 ~ 1785 MHz 1850 ~ 1910 MHz IntelliTrac X1 User’s Manual 8 LED Indicators PWR LED Status Function Off Power off 20 ms On / 2 secs Off The device is running in power saving mode. 500ms On / 500ms Off Reset procedure is in progress 20ms ON / 20ms Off Upgrade firmware is in progress On Power on GPS LED Status Function Off The GPS is off or running in power saving mode. 1 sec On / 1 sec Off No GPS satellites signal received On GPS Ready GSM LED Status Function Off The device is off or running in deep sleep mode. 600 ms On / 600ms Off No SIM card inserted or no PIN entered, or network search in progress, or network login in progress. 90 ms On / 3 secs Off Logged to network. 90 ms blinking 2 times /3secs Off GPRS Network connected © Systems & Technology Corp. All rights reserved. -8- IntelliTrac X1 User’s Manual 9 About Systems & Technology Corporation IntelliTrac X Series AVL device is produced by Systems & Technology Corporation. The company is a key developer and supplier of advanced systems in the Automatic Vehicle Location (AVL), Digital Map and Car Navigation Systems. If you need information on other maps solutions or products, please contact us at the phone and fax numbers listed below, or visit our web sites. Contact Information for System & Technology Corp. S&T Web Site Technical Support Hotline Technical Support E-mail Main Phone Main Fax http://www.systech.com.tw 886-2-26981599 AVL@ms.systech.com.tw 886-2-26981599 886-2-26981211 © Systems & Technology Corp. All rights reserved. -9- FCC Regulations: zThis mobile phone complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. zThis mobile phone has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Encryption : Standard V2.3 (128-bit) User Access : Print, Extract, Print high-res Tagged PDF : No XMP Toolkit : 3.1-701 Modify Date : 2006:10:30 19:14:27+08:00 Create Date : 2006:10:30 19:14:16+08:00 Metadata Date : 2006:10:30 19:14:27+08:00 Creator Tool : Acrobat PDFMaker 5.0 for Word Format : application/pdf Title : IntelliTrac X Series Protocol Document Description : Protocol Document Creator : Systems & Technology Corp. Document ID : uuid:ab56bc8c-391a-4d3d-89e5-e0523e39205d Instance ID : uuid:a8137fcb-c9fb-4106-8c40-ae65ed2020fd Producer : Acrobat Distiller 5.0 (Windows) Page Count : 13 Subject : Protocol Document Author : Systems & Technology Corp.EXIF Metadata provided by EXIF.tools