Systems and Technology STAVL1104 IntelliTrac User Manual X1 Plus User Guide 001
Systems & Technology Corp. IntelliTrac X1 Plus User Guide 001
user manual
IntelliTrac X1-PLUS Series User Guide Version: Date: Status: V0.1 10 May 2011 Preliminary Systems & Technology Corp. © 2011 This document contains confidential, restricted, and proprietary information. The document has been prepared for the exclusive internal use of certain designated S&T employees and may not be duplicated or distributed, in whole or in part, without the prior, written consent of an authorized officer of S&T. General notes With respect to any damages arising in operation with the described product or this document, S&T shall be liable according to the General Conditions on which the delivery of the described product and this document are based. This product is not intended for use in life support appliances, devices or systems where a malfunction of the product can reasonably be expected to result in personal injury. S&T customers using or selling this product for use in such applications do so at their own risk and agree to fully indemnify S&T for any damages resulting from illegal use or resale. Information in this document is subject to change without notice at any time. Copyright notice Copying of this document and giving it to others and the use or communication of the contents thereof, are forbidden without express authority. Offenders are liable to the payment of damages. © Systems & Technology Corp. All rights reserved Systems & Technology Corp. © 2011 This document contains confidential, restricted, and proprietary information. The document has been prepared for the exclusive internal use of certain designated S&T employees and may not be duplicated or distributed, in whole or in part, without the prior, written consent of an authorized officer of S&T. IntelliTrac X1-Plus Series User Guide Table Of Contents 1. Introduction.............................................................................................................................1 1.1 1.2 1.3 1.4 2. Basic Operations .....................................................................................................................3 2.1 2.2 2.3 2.4 3. 4. Scope ..................................................................................................................................................... 1 About IntelliTrac X1-Plus.......................................................................................................................... 1 Hardware Architecture ............................................................................................................................... 2 Related Documents .................................................................................................................................... 3 Hardware Installation................................................................................................................................. 4 Connectors Pins Assignment...................................................................................................................... 5 Software Upgrade ...................................................................................................................................... 6 Firmware Download Software ......................................................................................................... 8 5. Technical Specification for IntelliTrac X1-Plus...................................................................9 Electrical reliability and radio characteristics...................................................................10 LED Indicators…………………………………………..………………………………………12 6. FCC Regulations……………………...……………………………………………………13 Systems & Technology Corp. © 2011 This document contains confidential, restricted, and proprietary information. The document has been prepared for the exclusive internal use of certain designated S&T employees and may not be duplicated or distributed, in whole or in part, without the prior, written consent of an authorized officer of S&T. IntelliTrac X1-Plus Series User Guide 1.Introduction Thank you for your purchasing IntelliTrac X1-Plus GPS Vehicle Tracking device. The benefits are: Improve Safety Ensure Security Good efficiency on Fleet management and Dispatch solution Asset and resource management Economic operation and improving productivity Keep the Journey record for future analysis or accident report Where is the Car? When it will arrive? What is its speed now? 1.1 Scope The purpose of this document is to describe how to getting started with the IntelliTrac X Series devices. The document contains basic device configuration. For advanced users, please refer to the IntelliTrac X Series Protocol Document for detailed information. 1.2 About IntelliTrac X1-Plus The IntelliTrac X1-Plus GPS Unit wirelessly transmits location, peripheral, and vehicle control data to a control center. Location data, including speed, direction, mileage, and altitude, is provided by an onboard GPS receiver. Wireless transmission is achieved using an onboard GSM/GPRS module. microcontroller is used to poll location and command data at regular intervals, derive actions based on location, peripheral, and control data, and execute those actions. One of the best feature of X series AVL is that they can transit data on ASCII mode. Peripheral data indicates the status of the various peripherals that are connected to and/or controlled by the unit. Peripherals include, but not limited to, door locks/un-locks , starter interrupt, ignition, battery, engine and panic button. Firmware on the device applies intelligent filtering to overcome coverage limitations for both GPS and GSM/GPRS networks. Motion sensor is used to control the status of the unit, either sleep, idle, or full power, there by controlling the amount of current the unit consumes. Systems & Technology Corp. © 2011 This document contains confidential, restricted, and proprietary information. The document has been prepared for the exclusive internal use of certain designated S&T employees and may not be duplicated or distributed, in whole or in part, without the prior, written consent of an authorized officer of S&T. -1- IntelliTrac X1-Plus Series User Guide Backup battery and tamper sensing GPS Antennas are primarily used to indicate loss of Main Power and loss of GPS antenna connectivity. Device supports Over-the-air firmware upgrade to deliver added functionality without physically touching the device once installed. 1.3 Hardware Architecture The IntelliTrac X1-Plus hardware includes Micro-controller, GPS receiver, GSM/GPRS modem, I/Os interface. Systems & Technology Corp. © 2011 This document contains confidential, restricted, and proprietary information. The document has been prepared for the exclusive internal use of certain designated S&T employees and may not be duplicated or distributed, in whole or in part, without the prior, written consent of an authorized officer of S&T. -2- IntelliTrac X1-Plus Series User Guide User can use PC HyperTerminal connect to the Diagnostic / setting port to configure the AVL. The GPS is used for car accident. Car tow-away warning and power management. GPIO can be used to connect to any customer monitoring points (door switch, anti-thief) or Actuators. Serial Expansion port . RTOS OPTION: We will have X1,X1-Plus professional version with Real Time operation system in JAN.2011. 1.4 Related Documents [1] IntelliTrac X Series Protocol Document Basic Operations Systems & Technology Corp. © 2011 This document contains confidential, restricted, and proprietary information. The document has been prepared for the exclusive internal use of certain designated S&T employees and may not be duplicated or distributed, in whole or in part, without the prior, written consent of an authorized officer of S&T. -3- IntelliTrac X1-Plus Series User Guide 2. Basic Operations 2.1 Hardware Installation (1) SIM Card Installation Press yellow button to eject the SIM card holder. Put the SIM card on the SIM card holder. Insert the SIM card holder to the device correctly. (2) GPS Antenna Installation Systems & Technology Corp. © 2011 This document contains confidential, restricted, and proprietary information. The document has been prepared for the exclusive internal use of certain designated S&T employees and may not be duplicated or distributed, in whole or in part, without the prior, written consent of an authorized officer of S&T. -4- IntelliTrac X1-Plus Series User Guide Connect the GPS Receiver antenna to the right-down Press Mini DIN connector. (3) Power, I/O Cable Installation 2.2 Connectors Pins Assignment The I/O cable is a 10-wires cable which include power and positive/negative inputs and outputs. Systems & Technology Corp. © 2011 This document contains confidential, restricted, and proprietary information. The document has been prepared for the exclusive internal use of certain designated S&T employees and may not be duplicated or distributed, in whole or in part, without the prior, written consent of an authorized officer of S&T. -5- IntelliTrac X1-Plus Series User Guide (4) Install GSM Antenna Connect the GSM antenna to the SMA connector with label “GSM”. (5) Install RF Receiver (Optional) Connect the RF receiver it the 3 pins connector with label “RF”. GSG Antenna Power I/O Cable Serial Cable Systems & Technology Corp. © 2011 This document contains confidential, restricted, and proprietary information. The document has been prepared for the exclusive internal use of certain designated S&T employees and may not be duplicated or distributed, in whole or in part, without the prior, written consent of an authorized officer of S&T. -6- IntelliTrac X1-Plus Series User Guide 2.3 Software Upgrade Device Configurations Systems & Technology Corp. © 2011 This document contains confidential, restricted, and proprietary information. The document has been prepared for the exclusive internal use of certain designated S&T employees and may not be duplicated or distributed, in whole or in part, without the prior, written consent of an authorized officer of S&T. -7- IntelliTrac X1-Plus Series User Guide 2.4 Firmware Download Software Systems & Technology Corp. © 2011 This document contains confidential, restricted, and proprietary information. The document has been prepared for the exclusive internal use of certain designated S&T employees and may not be duplicated or distributed, in whole or in part, without the prior, written consent of an authorized officer of S&T. -8- IntelliTrac X1-Plus Series User Guide 3. Technical Specification Systems & Technology Corp. © 2011 This document contains confidential, restricted, and proprietary information. The document has been prepared for the exclusive internal use of certain designated S&T employees and may not be duplicated or distributed, in whole or in part, without the prior, written consent of an authorized officer of S&T. -9- IntelliTrac X1-Plus Series User Guide 4.Electrical reliability and radio characteristics Absolute maximum rating for power supply and voltage on digital input pins of the IntelliTrac X1-Plus are list in following table: 4.1 Operating temperatures The operating temperature is listed in following table: * The Intelli Trac X1-Plus device can work , but the deviation from the specification may occur. 4.2 GSM/GPRS Output Power Systems & Technology Corp. © 2011 This document contains confidential, restricted, and proprietary information. The document has been prepared for the exclusive internal use of certain designated S&T employees and may not be duplicated or distributed, in whole or in part, without the prior, written consent of an authorized officer of S&T. - 10 - IntelliTrac X1-Plus Series User Guide 4.3 GSM/GPRS Receive sensitivity 4.4 GSM/GPRS Receive/transmit frequency Systems & Technology Corp. © 2011 This document contains confidential, restricted, and proprietary information. The document has been prepared for the exclusive internal use of certain designated S&T employees and may not be duplicated or distributed, in whole or in part, without the prior, written consent of an authorized officer of S&T. - 11 - IntelliTrac X1-Plus Series User Guide 5. LED Indicators Systems & Technology Corp. © 2011 This document contains confidential, restricted, and proprietary information. The document has been prepared for the exclusive internal use of certain designated S&T employees and may not be duplicated or distributed, in whole or in part, without the prior, written consent of an authorized officer of S&T. - 12 - IntelliTrac X1-Plus Series User Guide FCC Regulations: This mobile device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This mobile device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment. 4RF Exposure Information This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 20cm (8 inches) during normal operation. Systems & Technology Corp. © 2011 This document contains confidential, restricted, and proprietary information. The document has been prepared for the exclusive internal use of certain designated S&T employees and may not be duplicated or distributed, in whole or in part, without the prior, written consent of an authorized officer of S&T. - 13 - IntelliTrac X1-Plus Series User Guide About Systems & Technology Corporation IntelliTrac X-Series AVL device is produced by Systems & Technology Corporation. The company is a key developer and supplier of advanced systems in the Automatic Vehicle Location (AVL), Digital Map and Car Navigation Systems. If you need information on other maps solutions or products, please contact us at the phone and fax numbers listed below, or visit our web sites. Contact Information for System & Technology Corp. S&T Web Site Technical Support Hotline Technical Support E-mail Main Phone Main Fax http://www.systech.com.tw +886-2-2698-1599 AVL@ms.systech.com.tw +886-2-2698-1599 +886-2-2698-1211 Systems & Technology Corp. © 2011 This document contains confidential, restricted, and proprietary information. The document has been prepared for the exclusive internal use of certain designated S&T employees and may not be duplicated or distributed, in whole or in part, without the prior, written consent of an authorized officer of S&T. - 14 -
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V2.3 (128-bit) User Access : Print, Extract, Print high-res Create Date : 2011:05:10 11:40:15Z Creator : PDF reDirect v2 Modify Date : 2011:05:12 09:32:32+08:00 XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Creator Tool : PDF reDirect v2 Metadata Date : 2011:05:12 09:32:32+08:00 Producer : EXP Systems LLC (www.exp-systems.com) Format : application/pdf Title : X1-Plus - User Guide -001 Document ID : uuid:34b3c54c-1201-4827-9637-bb019fe4c542 Instance ID : uuid:5cb616d3-78e2-4ccd-a9b4-d6e90c0a26c0 Page Mode : UseNone Page Count : 17EXIF Metadata provided by EXIF.tools