Systems and Technology STAVL1432 GPS Vehicle Tracking Device User Manual

Systems & Technology Corp. GPS Vehicle Tracking Device

User Manual

                     CAREU UCAN 3G  User Guide      Version: 0.1  Reference No.: AVL Date: 2014/8/26                               SYSTEMS  & TECHNOLOGY  CORP.
General Information If any breakdown occurs due to the operation of the described product or users’ improper handling in accordance with the instructions of the document, S&T shall be liable for the General Conditions based on the delivery of the described product and the content of the document. This product is not designed for the use of life support appliances, devices or systems and thence a malfunction of the product might reasonably be expected to make personal injury. S&T customers using or selling this product for such applications will take the risk on their own; therefore, it must be agreed S&T will be fully indemnified from any damages due to illegal use or resale. All information in this document is subject to change without notice at any time.   Disclaimer The information, specification, images and photos in this user guide are subject to change without notice and without obligation to notify any person of such revision change.   Copyright This user guide, including all  photographs, illustrations and software, to  name a few,  is  protected under international  copyright  laws,  with all  rights  reserved. This  document contains confidential, restricted and proprietary information that  it has been exclusively prepared for the  internal use of certain designated S&T employees, and may not be duplicated or  distributed, in whole or in part, without the prior written consent of S&T’s authorized delegates. Any illegal copying and disclosure of the document are absolutely prohibited, and violators are liable to the damages caused.   ©  Systems & Technology Corp. All Rights Reserved
Table of Contents Chapter 1  Introduction ................................................................................................... 1  1.1 Features....... ........................................................................................................ 1  1.2 Scope ................................................................................................................... 1  1.3 About CAREU UCAN 3G..................................................................................... 1  1.4 Hardware Architecture ......................................................................................... 2  1.5 Related Document ............................................................................................... 2  Chapter 2  Taking a Tour of CAREU UCAN 3G ......................................................... 3  2.1 Dimensions .......................................................................................................... 3  2.2 PIN Assignment.................................................................................................... 3 Chapter 3  Getting Started with CAREU UCAN 3G................................................... 5  3.1 Hardware Installation ........................................................................................... 5  3.2 USB Device Driver Installation ............................................................................. 6  3.3 Device Configuration.......................................................................................... 12  3.4 Communication Settings .................................................................................... 16  3.5 GPS Tracking Configurations............................................................................. 17  3.6 Firmware Upgrade ............................................................................................. 18 Chapter 4  Technical Specification .............................................................................. 19 Chapter 5  Regulation……………… .............................................................................. 22
CAREU UCAN 3G - User Guide Chapter 1 1    Chapter 1  Introduction     1.1  Features     Thank  you  for  purchasing  CAREU  UCAN  3G  GPS Vehicle  Tracker,  a  plug-and-use  device  for  tracking  and vehicle status diagnostics.   ●   SMS, GPRS TCP/UDP, USSD, FTP communications ●   Plug-and-use design and cost effectiveness ●   DTC OBD II error codes ●   GSM/GPRS simultaneously ●   Real-time tracking (Time, Distance Interval or Intelligent Mode, and Heading) ●   Firmware upgrade over the air (via GPRS from FTP) ●   Journey report wireless download ●   Battery low alert ●   Geofence reports ●   Mileage reports ●   User-defined reports ●   Up to 100,000 data logs    1.2  Scope   This  document  will  guides  you  to  start  the  CAREU  UCAN  3G  Vehicle  Tracker. However,as this document contains basic device configuration only, please see the CAREU UCAN 3G Protocol Document for the advanced information.   1.3  About CAREU UCAN 3G   Designed  with  the  latest  GPS  technology,  the  CAREU  UCAN  3G  delivers  positioning message by GSM wireless  transmission to GIS platform, and then  helps  back-end users proceed with the analysis and the applications of vehicle transport, management, anti-theft, security and tracking.  A microcontroller can probe location and command data at regular intervals, derive actions from  location,  peripheral  and  control  data,  and  execute  such  actions.   Peripheral  data indicates the  status  of  various  peripherals connected to  and/or  controlled  by  the  device. Among  the  best  features  of  the  CAREU  UCAN  3G  Vehicle  Tracker,  in  particular,  they transmit data in ASCII mode (Intellitrac X Series compatible mode) or binary mode.
CAREU UCAN 3G -  User Guide 2 Chapter 1    The  firmware  in  the  device  applies  intelligent  filtering  to  overcome  coverage limitations for both GPS and GSM/GPRS networks. Motion sensor controls the status of the device, whether in sleep, idle or fully-powered mode, and thereby controls the amount of current consumed by the device. The device supports over-the-air firmware upgrade to deliver additional functionality without physically touching the device once installed.    1.4  Hardware Architecture  As  hardware  is  concerned,  the  CAREU  UCAN  3G  is  comprised  of  a  micro-controller,  regulator,  GPS  receiver,  GSM/GPRS  modem,  G-Force  sensor,  flash memory data storage.  ●    Users can connect PC's Hyper Terminal to the diagnostic setting port for the AVL configuration.  ●  G-Sensor is  for car accident prevention, car  tow-away warning and power management.    SPI FLASH    G-Sensor CAN Transceiver       GPS        GSM Modem CPU USB     Power        1.5  Related Document  [1]   CAREU UCAN 3G Protocol Document
CAREU UCAN 3G - User Guide Chapter 1 3    Chapter 2  Taking a Tour of CAREU UCAN 3G    2.1  Dimensions   Dimensions (L x W x H): 48mm x 66mm x 25mm      25mm  48mm    66mm    2.2  PIN Assignment  1.   Pin Definition of OBD II Connect   8877665544332211  1166 1155 114411331122 11111100 9     Pin# Signal Name Description  1,3,8,9, 11,12,13   NC   No  Connect  2  J1850 BUS+  SAE J1850 Data Transmission Cable (+)  4,5  GND  Signal Ground  6  CAN-H  ISO 15765-4; CAN Bus Diagnostic Cable (H Cable)  7  ISO-K  SAE J1850 Data Transmission Cable (-)  10  J1850 BUS  ISO 15765-4; CAN Bus Diagnostic Cable (L Cable)  14  CAN-L  ISO 15765-4; CAN Bus Diagnostic Cable (L Cable)  15  ISO-L  ISO-9141-2 Data Transmission Cable (L)  16  VIN  Battery Supply Input (12V/24V)
CAREU UCAN 3G -  User Guide 4 Chapter 2    2.   USB Port            3.   SIM Card Slot
CAREU UCAN 3G - User Guide Chapter 2 5   SIM Card  Chapter 3  Getting Started with CAREU UCAN 3G   To install the the CAREU UCAN 3G device, follow the instructions below for basic operations.    3.1  Hardware Installation  1.   Installation Mode                  2.   Mini USB Cable Connect                       3.   SIM Card Installation
CAREU UCAN 3G -  User Guide 6 Chapter 2    3.2  USB Device Driver Installation   The  CAREU  UCAN  3G  communicates  with  your  host  computer  by  the  USB interface.   In some newer editions of Windows XP, the CAREU UCAN 3G device can be installed as a "virtual  COM  port"  device  whereby  the  CAREU  UCAN  3G  would  automatically  access Windows XP's inbox USB drivers. While in some other earlier editions of Windows XP, you would need to manually install the USB driver for the CAREU UCAN 3G device.  To install the device driver for the CAREU UCAN 3G, connect the CAREU UCAN 3G device to your system with an USB cable as mentioned in Mini USB Cable Connection on page 6.  As soon as the connection is made between the CAREU UCAN 3G and your computer, a balloon appears above the notification area saying an USB device is found.  Click on this balloon to start the [Found New Hardware] wizard.       Select No, not this time. Press the Next button to proceed.
CAREU UCAN 3G - User Guide Chapter 3 7    1.  Automatic Installation If  the  wizard  prompts  to  help  you  install  the  software  for  "STMicroelectronics  Virtual COM Port". Select  Install  the  software  automatically (Recommended). Press the Next button to proceed.      The wizard proceeds to install the driver.
CAREU UCAN 3G -  User Guide 8 Chapter 3    The installation completes.      In [Device Manager], the CAREU UCAN 3G device is included under Ports (COM & LPT) as "STMicroelectronics Virtual COM Port". COM port number is displayed as well.
CAREU UCAN 3G - User Guide Chapter 3 9    2.   Manual Installation After  you  select  No,  not  this  time,  if  the  wizard  only  prompts  to  help  you  install software for "USB device", you need to manually install the driver. Select Install from a list or specific location (Advanced). Press the the Next button to proceed.      Select Search for the best driver in these locations. Check Include this location in the search. Press the Browse button to assign where your the CAREU UCAN 3G device driver locates on your local disk.  Press the OK button.  You can download the USB device driver from http://www.systech.com.tw/downloads-04.php ?id=34&page=downloads&lang=en
CAREU UCAN 3G -  User Guide 10 Chapter 3    Press the Next button to proceed.      The wizard proceeds to install the driver.
CAREU UCAN 3G - User Guide Chapter 3 11    The installation completes.      In [Device Manager], the CAREU UCAN 3G device is included under Ports (COM & LPT) as"S&T Tracker". COM port number is displayed as well.
CAREU UCAN 3G -  User Guide 12 Chapter 3    3.3  Device Configuration  1.   In Windows XP desktop, click Start | All Programs | Accessories | Communications | HyperTerminal.  2.   If you are prompted to input the information of your location, complete them to proceed.  3.  On the File menu of HyperTerminal, click New Connection.  4.   In the Name box, type a name that describes the connection. In the Icon box, click an  appropriate icon. Press the OK button to proceed.     5.  For Com port properties, configure as follows: Baud Rate --> 115200 bps Data Bits --> 8 Parity --> None Stop Bits --> 1 Flow Control --> None
CAREU UCAN 3G - User Guide Chapter 3 13    6.   In the connection that you have just set up, click File | Properties. Select the [Connect To] tab. From the [Connect using] drop down list, select the correct com port by checking it up at Windows XP's [Device Manager] as previously mentioned on page 9 and page  12. Go there by clicking Start | Control Panel | System | Hardware | Device Manager.
CAREU UCAN 3G -  User Guide 14 Chapter 3    7. In the File menu, click Properties. Click the [Settings] tab. Press the ASCII Setup button.      8. In the [ASCII Sending] group box. Select both Send line ends with line feeds and Echo typed characters locally. Press the OK button.
CAREU UCAN 3G - User Guide Chapter 3 15    9.  Connect your the CAREU UCAN 3G device to power as mentioned in  USB on page 6. The  device startup message will be displayed.     10.  In [HyperTerminal] window, type in the command "AT$VERSION?" and press the Enter  key.  The  hardware  and  firmware  version  will  show.  As  long  as  your [HyperTerminal]   window appears as the screenshot below, a connection between the device  and  your  system  has  already been built  up  and  working.  It  is  time  to  send  all configuration commands.
CAREU UCAN 3G -  User Guide 16 Chapter 3    3.4  Communication Settings  The  CAREU  UCAN  3G  Vehicle  Tracker  communicates  with  your  control  center  by either  SMS  or  GPRS  (TCP/UDP).  Before  the  device  is  installed  into  a  vehicle, communication parameters should be set.  1.   SMS Configuration Use AT$SMSDST command to set a SMS control center phone number or short code. For example, if the SMS control center phone number is +886123456789, the AT$SMSDST command to be issued into HyperTerminal should be:  AT$SMSDST=+886123456789  OK  Then you can try to use cellular phone or SMS gateway to send a SMS message to the CAREU UCAN 3G device. Send a SMS message -->"AT$MODID?" Device will response: $MODID=101000001  OK  This proves a successful mobile phone SMS connection.    2.     GPRS Configuration   Set GPRS servers by using the folloiwng commands: AT$APN=internet,username,password (APN=internet, Username=username, Password=password) OK AT$HOSTS=1,0,60.148.19.10,6000  (Server IP address = 60.148.19.10 and Port number =6000) OK AT$RETRY=5,10 (Message retry settings) OK AT$IPTYPE=1 (Using TCP/IP mode) OK AT$GPRSEN=1 (GPRS enable) OK AT$HB=60,1 (Heartbeat setting) OK  Please refer to the CAREU UCAN 3G Protocol Document for more command details.
CAREU UCAN 3G - User Guide Chapter 3 17    3.5  GPS Tracking Configurations  After  the device communication settings are  done, the remote  GPS tracking  is  ready to function.  The  setting  of  GPS  tracking  can  be  done  by  using  AT$PDSR  command.  For example, AT$PDSR=1,30,0,0,2,0,0,1,0 (Tracking through GPRS by time interval 30 seconds) OK   For simple testing GPRS, run the TCP Server U-Series software which is provided by S&T. It is simple server software that can wait for device connection and data.      For advanced testing, you need the software Intelli TracerPlus. Please request this software through your sales contact.    You can also apply for a testing account from S&T's FleetWeb solution through your sales contact.
CAREU UCAN 3G -  User Guide 18 Chapter 3    The main page of the Intelli FleetWeb appears as below:                         3.6  Firmware Upgrade  The  firmware  of  the  CAREU  UCAN  3G  can  only  be  updated  through  USB interface. With the firmware loader tool provided by S&T, firmware update can be done for the device. Such firmware loader runs on Windows-based systems. To upgrade the firmware, follow the procedure below  1.   Connect the device to your PC with the USB cable. 2.   Connect the device to power. 3.   Power on the device. 4.   Run ServerUSeries.exe. A window displays as follows:    5.  Press browse the button   to  browse to the firmware provided by S&T. 6.  Press the Start button to run the firmware program. 7.  After the writing progresses to 100%, it takes about 20 seconds for the update to completes. 8.  Firmware update completes.
CAREU UCAN 3G - User Guide Chapter 3 19    Chapter 4  Technical Specification   Characteristics   Dimensions (L x W x H)  48mm x 66mm x 25mm  Weight  55g    Radio Performance   Frequency  U260 for NAR Ver. 850/1900MHz    U270 for EUR Ver. 900/1800/2100MHz    GSM Functionality / GPRS   GPRS Mode  Multislot Class 10  GSM Antenna  Internal  SIM Interface  SIM Card 1.8V, 3V Supported    GPS Functionality   Receiver  50 Channels  Sensitivity (Tracking)  -162dBm  Antenna Type  Internal GPS Active Antenna, 3.3V  GPS Protocol  NMEA 0183 (2.3, compatible to 3.0)    Onboard Components   MCU  32-bit Microcontroller  Data Memory  8MB Flash  Motion Sensor  3-axes Acceleration Sensor
CAREU UCAN 3G -  User Guide 20 Chapter 4     Electrics   Power Source  DC 8V to 30V  Power Consumption 150mA @ 12V (operating mode) 20mA  @ 12V ( sleep mode)    Environment   Temperature –20 °C to +60 °C (Operating Temperature) –20 °C to +70 °C (Storage Temperature Note: The specification herein is subject to change without prior notice.
CAREU UCAN 3G - User Guide Chapter 21      Systems & Technology Corp. (S&T), founded in 1987, is a market leader in Automatic Vehicle Locating (AVL) solutions, Geographical Information Systems (GIS) and navigation.  It has formed a professional development team to innovate the most advanced and comprehensive GPS tracking products for the customers and has built a global service network to provide non-stop services and support.   With the well-established marketing networks of over 100 distributors in the world, S&T is your trustworthy tracking solution provider.  For more product information, please contact S&T by Email, phone or fax.      Web Site  http://www.systech.com.tw  Email  avl@systech.com.tw  Phone  +886 2 26981599  Fax  +886 2 26981211
CAREU UCAN 3G -  User Guide 22 Chapter 4    Chapter 5. Regulation  Federal Communication Commission Interference Statement  This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.  These limits are designed to provide reasonable protection against harmful interference in a residential  installation.  This  equipment  generates,  uses  and  can  radiate  radio  frequency  energy  and,  if  not installed and used in accordance with the instructions, may cause harmful interference to radio communications.  However, there is no guarantee that interference will not occur in a particular installation.  If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:   Reorient or relocate the receiving antenna.  Increase the separation between the equipment and receiver.  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  Consult the dealer or an experienced radio/TV technician for help.  FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.  This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.   Radiation Exposure Statement: This  equipment  complies  with  FCC  radiation  exposure  limits  set  forth  for  an  uncontrolled  environment.  This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
  CAREU UCAN 3G - User Guide    Taiwan 警語: (此產品含電信終端設備+電信管制射頻器材) 電磁波警語標示  (1) 警語內容:「減少電磁波影響,請妥適使用」。 (2) 標示方式:必須標示於設備本體適當位置及設備外包裝或使用說明書上。     經型式認證合格之低功率射頻電機,非經許可,公司、商號或使用者均不得擅自變更頻率、加大 功率或變更原設計之特性及功能。     低功率射頻電機之使用不得影響飛航安全及干擾合法通信;經發現有干擾現象時,應立即停用,並改善至 無干擾時方得繼續使用。 前項合法通信,指依電信法規定作業之無線電通信。低功率射頻電機須忍受合法通信或工業、科學及醫療 用電波輻射性電機設備之干擾。                                                Chapter 5

Navigation menu