TCL Air conditioner ETWAC-TUWF Windows Type Air-condition User Manual

TCL Air conditioner (Zhong Shan) Co.,Ltd. Windows Type Air-condition

User Manual

TWAC-15CRA1/K8U(ES)TWAC-24CRA2/J3U(ES)Windows Type Air-conditionHEALTH
INTRODUCTIONIMPORTANT SAFETY INSTRUCTION ........................................................................... ...................................................................................PACKING LIST ............................................................................................................INSTALLATION&ASSEMBLY INSTRUCTIONS ..............................................................USING YOUR AIR CONDITIONER ................................................................................ ........................................................................CARE AND CLEANING ................................................................................................ TROUBLESHOOTING .................................................................................................ELECTRICAL REQUIREMENTSOPERATING YOUR AIR CONDITIONER123413151617
1
215K 18K/22K/24K
358SCREWHEX-HEADFLAT-HEAD BOLT58Hardware(in plastic bag) Qty.Safety Lock5/16" Long Hex-head Screw 5/8" Long Hex-head Screw 1/2" Long Hex-head Screw 5/8" Long Flat Head Bolt and LocknutSill Angel Bracket1/2" Long Flat Head Bolt and Locknut Gasket110422ea24ea2
415K/18K17.91 18.62523.625 26.5019.00 19.5028.00 30.0041.00 41.0022K/24K
SASHSASH1/2 MIN1/2 MIN19 MIN19 1/2 MINFIG.1FIG.3STORM WINDOW FRAME OROTHER OBSTRUCTIONSTORM WINDOW FRAME OROBSTRUCTIONFIG.2FIG.4SASHSASH1/2 MIN1/2 MIN19 MIN19 1/2 MIN1/2 MIN1/2 MINStorm window frameor obstruction5(15K/18K See FIG.1/FIG.2 ; 22K/24K See FIG.3/FIG.4).
6
7
85/16" Long Hex-head Screw 5/16" Long Hex-head Screw 5/8" Long Hex-head Screw (Suggest to keep a downward oblique angle within 3 degree,  to let accumulated rain water to drain out, from back side of the unit bottom.)
95/8" Long Hex-head Screw 1/2" Long Hex-head Screw 5/8" Long Hex-head Screw
10
1115K/18K18 1/4 (46.4 cm)23 7/8 (60.6 cm)22K/24K18 7/8 (47.9 cm)26 3/4 (67.9 cm)Y
12
131234567891.                              Without timer setting,the operation mode is Cooling,Dry, Fan and Auto,and the set temperature will be displayed.Time will be displayed under timer setting.Digital Display:       and      Button:2.                                    Use these buttons on the control panel and remote to increase or decrease the Set Temperature or Timer. Temperature range: 61 ~88  or 16 ~31 .3.                             Turn the air conditioner on and off.Power Button:                          Press the mode button to cycle through the various modes: Cool, Dry, Fan and Auto.4. Mode Button:                          Use these buttons on the control panel and remote to set the Timer. Timer Off: The timed stop is programmed by pressing TIMER button. Set the rest time by pressing the button  or  until the rest time displayed is to your demand then press TIMER button again.Timer On: When the unit is off, press TIMER button at the first time, set the temperature with pressing the button  or  . Press TIMER button at the second time, set the rest time with pressing the button  or  . Press TIMER button at the third time, confirm the setting, then the rest time to next automatical switching-on could be read on the display of the machine. Note: It can be set to automatically turn off or on in 0.5-24 hours. Each press of the  buttons will increase or decrease the timer. The Timer can be set in 0.5 hours increment below 10 hours and 1 hour increment for 10 hours or above. The SET light will turn on while setting. To cancel the setted function, press the TIMER button again.5. Timer Button:Cool Mode: The cooling function allows the air conditioner to cool the room and at the same time reduces Air humidify. Press the MODE button to activate the cooling function. To optimize thefunction of the air conditioner, adjust the temperature and the speed by pressing the button indicated.Dry Mode: This function reduces the humidity of the air to make the room more comfortable. Press MODE button to set the DRY mode. An automatic function of alternating cooling cycles and air fan is activated. Fan Mode: The conditioner works in only ventilation. Press MODE button to set the FAN mode. With pressing FAN SPEED button the speed changes in the following sequence: Hi, Med and Lo in FAN mode. The remote control also stories the speed that was set in the previous mode of operation. In AUTO mode the unit automatically chooses the fan speed and the mode of operation(COOL,DRY or FAN).HEALTH
14                       When the unit is in ECO mode, the light will turn on. In ECO mode, the unit will turn-off once the room is cooled to the user set temperature. The fan will also be off at this point. The unit will turn back on when the room temperature rises above the user set temperature.6. Eco Button:                          Press the SLEEP button, the Sleep Light will be on after 10s, and all the left lights will be off. In SLEEP mode, the air-conditioner will automatically adjust the temperature and fan speed to make the room more comfortable during the night. The set temperature will automatically raise by 1   every 30-60 minutes and at most change six times until the set temperature is 28  . And every running time depends on the set temperature.7. Sleep Button:                                   Press the FAN SPEED button to choose the fan speed options. You can choose Hi, Med, Lo or auto speed in COOL mode and choose Hi, Med, Lo in FAN mode.8. Fan Speed Button:9.10.                         When the Filter Check light is off, it is useless to press the Filter Check button. When the Filter Check light is on, it can turn off the light by pressing the Filter Check button. After the compressor works for 500 total hours, the Filter Check light will turn on to remind the user to clean the filter.                                       To direct the airflow,horizontal wheel to control the horizontal direction, air deflector to control the vertical direction.Filter Button:Directional Louvers:horizontal wheelair deflector air deflector11.WIFI remote function please read the    APP user manual.
15145633781092          When the unit is in ECO mode, the light will turn on. In ECO mode, the unit will turn-off once the room is cooled to the user set temperature. The fan will also be off at this point. The unit will turn back on when the room temperature rises above the user set temperature.                   Press the Fan Only button to FAN ONLY mode.9.10.Eco:Fan Only:                       Press the FAN SPEED button to choose the fan speed options. You can choose Hi, Med, Lo or auto speed in COOL mode and choose Hi, Med, Lo in FAN mode.7. Fan Speed:                To press the DISPLAY button, it can switch off/on all lights or LED display.8. Display:             Use these buttons on the control panel and remote to set the Timer. Timer Off: The timed stop is programmed by pressing TIMER button. Set the rest time by pressing the button  or  until the rest time displayed is to your demand then press TIMER button again.Timer On: When the unit is off, press TIMER button at the first time, set the temperature with pressing the button  or  . Press TIMER button at the second time, set the rest time with pressing the button  or  . Press TIMER button at the third time, confirm the setting, then the rest time to next automatical switching-on could be read on the display of the machine. Note: It can be set to automatically turn off or on in 0.5-24 hours. Each press of thebuttons will increase or decrease the timer. The Timer can be set in 0.5 hours increment below 10 hours and 1 hour increment for 10 hours or above. The SET light will turn on while setting. To cancel the setted function, press the TIMER button again.5. Timer:           Press AUTO button enter into AUTO mode directly. In this mode the fan speed and the temperature are set automatically according to the room temperature (tested by the temperature sensor which is incorporated in the indoor unit.).6. Auto:             Press the SLEEP button, the Sleep Light will be on after 10s, and all the left lights will be off. In SLEEP mode, the air-conditioner will automatically adjust the temperature and fan speed to make the room more comfortable during the night. The set temperature will automatically raise by 1   every 30-60 minutes and at most change six times until the set temperature is 28  . And every running time depends on the set temperature.4. Sleep:1.               Turn the air conditioner on and off.Power:2.              Press the COOL button to COOL mode.Cool:      and      :3.                      Use these buttons on the control panel and remote to increase or decrease the Set Temperature or Timer. Temperature range: 61 ~88  or 16 ~31 .
16
17
18
FCC Caution.  This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.  Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.  Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.    The distance between user and device should be no less than 20cm.
Please scan the QR code to download the latest App software.Or download “Smart Life-smart homeThe latest App software includes air conditioner, deh-umidifier and Portable air conditioner.” from APP Store or Goo-gle Play.Service conditionThank you for choosing our air conditioner.This manual apply to the air conditioners which has WiFi function. Please read the manual carefully before using the product and keep it properly for further review.Please do not unplug the WIFI module by yourself.For technical update, there may be deviation of the actual items from the manual. We express our apologies. Please refer to the actual product.MentionFCC ID: 2AJCLETWAC-TUWFThis device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and(2) this device must accept any interference received, including inter-      ference that may cause undesired operation.1For Android For IOSAPP User Manual
Install the APP    When download the APP software, you can install it in your smart phone.    After installation, you can find the “Smart Life  icon on your phone desk.”
2Activate QR code1. When you first time enter the App, it will display activation interface,     you can select scan activation QR code (click “Scan” button and scan the     activation QR code in below page) or input  words (in be-    low page), click “activate” button to active it.“activation code” 2. Air conditioner activation QR code3. Air conditioner activation code WORDS:_____________
3Register user accountWhen you first time use the App, you need to register an account.Click “Register” button to enter to the register interface. You can registerwith email or “Register with Mobile number”.1. Register account login, fulfill the registered email or phone number account    and password, press “Login” button.2. Phone number login, press “Sign in with SMS” button to enter the next page,    fulfill the phone number and press “get” button to receive the confirm code,    and fill in, then press “Login” button.3. You also can use the Facebook or Twitter account to login by the below part.Login user account
4Forget passwordIf you forget the password, you can retrieve it by below process.1. Press the “Forgot password” button to enter the next page.2. Fulfill the registered phone number or email account, press“Next”    button to enter the next page.3. You will receive the verification code, fulfill it, and set the new pas-    sword, press “confirm” button to finish.Add the device1. Press “Add Device” button to next page, select the product type.2. There are two methods to do the device match, “CF” or “AP mode”.    You can choose by the different button..
5Add the device (CF mode)For CF Mode1. The system defaults to CF mode at first, Press “Next Step” to continue.2. Select the home router, and fulfill the password of router, press “Next”     to continue.3. The APP software will automatically to do the device match. 4. After match successfully, the page will display the prompt as below.5. You can “Rename” the device name as you like, or share with family,    or press “Done” to start to control the device.
6Add the device (AP mode)For AP mode1. Click the “AP Mode” to the “AP” page. Press “Next Step” to continue.2. Select the home router, fulfill the password, press “Next” to continue.3. Select the AC Device as name “SmartLife-XXX” at the WLAN setting,     then back to the APP interface. The APP will automatically do match.
7Add the device  (AP mode)4. After match successfully, the page will display the prompt as below.5. If match failed, the APP will mention it, and press “Retry” to try again.Go back to “Device list” page at first. Slide the device name toward the left side, you can choose to delete it,or modify the device name as you like.Delete the device or Modify device nameAir conditioner
8Air conditioner control1. Click the air conditioner name to enter the control interface. Turn ON/OFF.Adjust the setting temperature.Decrease setting temperature. Increase setting  temperature.*For App update, there maybe deviation of the actual items from what is   on the manual without prior notice. We express our apologies.Turn ON/OFF.2. Adjust the different operating mode, Cool, Heat, Dry, Fan, Auto mode.Click the “Mode” button, and choose different running mode as you like.For the cooling only unit, the heat mode is no useful.For Dry mode, at the first 3 minutes, the APP temperature display maybe little different from the unit display, caused by the unit temperaturefast changing.Display the settingtemperature.
9Air conditioner control3. Click the “Fan” button, choose different fan speed, Low, Med,High, Auto.4. Other function control can by selected by “Function”  button, Sleep, ECO.When Sleep mode, the fan speed will be fixed to low speed.Air conditionerAir conditioner
10Air conditioner control5. Setting Timer function. Click the “Timer” button, the APP will enter to timersetting interface. It will display the task scheduler set before. You can long-term press to edit or build a new scheduler by “Add Timer” button. 6. Click “ON” or “OFF” button to set Timer ON or Timer OFF. You can set Hour, Minute, operate Mode, operate Fan Speed, operateTemperature, also can set the weekly Timer.After finish the setting, click the button to cancel or confirm.Hour setting Minute settingMode settingFan Speed settingWeekly settingTimer cancel Timer submitTemperaturesettingAir conditionerTimer ON/OFFsetting
Air conditioner control7. More setting. From the right-up corner, you can do more function setting,as Modify Device Name, Device Sharing, Device information, Feedback,Check for firmware update, Remove Device, Restore Manufacture setting. 8. Profile. You can manage your personal information. It includes:a, Account information.b, Scan QR code: Developers could preview the control interface.c, Share Device: Display user s device sharing information.d, Message Centre: Displays all messages that system sent to users.e, Feedback: Where users could submit feedback online.f, About: Displays the current App version information.‘11Air conditioner
Air conditioner control9. Pattern unlock. Tap “Pattern unlock” to set up your App unlock pattern.    After it is enabled, you need to draw the pattern to unlock the App.
Trouble shooting12

Navigation menu