TCL Air conditioner ETWAC-TUWF Windows Type Air-condition User Manual
TCL Air conditioner (Zhong Shan) Co.,Ltd. Windows Type Air-condition
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3588263 |
| Application ID | gdUs/GpkmeYKLJcV2gaxxw== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | Yes |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 334.54kB (4181800 bits) |
| Date Submitted | 2017-09-29 00:00:00 |
| Date Available | 2017-09-29 00:00:00 |
| Creation Date | 2017-09-28 10:22:12 |
| Producing Software | Acrobat Distiller 9.0.0 (Windows) |
| Document Lastmod | 2017-09-28 10:22:12 |
| Document Title | User Manual.pdf |
| Document Creator | CorelDRAW Version 9.397 |
| Document Author: | Microsoft |
TWAC-15CRA1/K8U(ES) TWAC-24CRA2/J3U(ES) Windows Type Air-condition HEALTH INTRODUCTION IMPORTANT SAFETY INSTRUCTION ...........................................................................1 ELECTRICAL REQUIREMENTS ................................................................................... 2 PACKING LIST ............................................................................................................3 INSTALLATION&ASSEMBLY INSTRUCTIONS .............................................................. 4 USING YOUR AIR CONDITIONER ................................................................................ 13 OPERATING YOUR AIR CONDITIONER ........................................................................15 CARE AND CLEANING ................................................................................................ 16 TROUBLESHOOTING ................................................................................................. 17 1 15K 18K/22K/24K Hardware (in plastic bag) Safety Lock 5 8 HEX-HEAD SCREW 10 5/8" Long Hex-head Screw 1/2" Long Hex-head Screw Sill Angel Bracket 1/2" Long Flat Head Bolt and Locknut Gasket 58 5/16" Long Hex-head Screw 5/8" Long Flat Head Bolt and Locknut FLAT-HEAD BOLT Qty. 2ea 4ea 15K/18K 22K/24K 17.91 18.625 23.625 26.50 19.00 19.50 28.00 30.00 41.00 41.00 (15K/18K See FIG.1/FIG.2 ; 22K/24K See FIG.3/FIG.4). FIG.1 FIG.2 SASH SASH 19 MIN 1/2 MIN 19 MIN 1/2 MIN 1/2 MIN Storm window frame or obstruction STORM WINDOW FRAME OR OTHER OBSTRUCTION FIG.3 FIG.4 SASH SASH 19 1/2 MIN 1/2 MIN 19 1/2 MIN 1/2 MIN STORM WINDOW FRAME OR OBSTRUCTION 1/2 MIN 6 7 (Suggest to keep a downward oblique angle within 3 degree, to let accumulated rain water to drain out, from back side of the unit bottom.) 5/16" Long Hex-head Screw 5/8" Long Hex-head Screw 5/16" Long Hex-head Screw 5/8" Long Hex-head Screw 1/2" Long Hex-head Screw 5/8" Long Hex-head Screw 10 15K/18K 22K/24K 18 1/4 (46.4 cm) 18 7/8 (47.9 cm) 23 7/8 (60.6 cm) 26 3/4 (67.9 cm) 11 12 Cool Mode: The cooling function allows the air conditioner to cool the room and at the same time reduces Air humidify. Press the MODE button to activate the cooling function. To optimize the function of the air conditioner, adjust the temperature and the speed by pressing the button indicated. Dry Mode: This function reduces the humidity of the air to make the room more comfortable. Press MODE button to set the DRY mode. An automatic function of alternating cooling cycles and air fan is activated. Fan Mode: The conditioner works in only ventilation. Press MODE button to set the FAN mode. With pressing FAN SPEED button the speed changes in the following sequence: Hi, Med and Lo in FAN mode. The remote control also stories the speed that was set in the previous mode of operation. In AUTO mode the unit automatically chooses the fan speed and the mode of operation(COOL,DRY or FAN). HEALTH 9 8 7 6 5 4 1. Digital Display: Without timer setting,the operation mode is Cooling,Dry, Fan and Auto,and the set temperature will be displayed. Time will be displayed under timer setting. 2. and Button: Use these buttons on the control panel and remote to increase or decrease the Set Temperature or Timer. Temperature range: 61 ~88 or 16 ~31 . 5. Timer Button: Use these buttons on the control panel and remote to set the Timer. Timer Off: The timed stop is programmed by pressing TIMER button. Set the rest time by pressing the button or until the rest time displayed is to your demand then press TIMER button again. Timer On: When the unit is off, press TIMER button at the first time, set the temperature with pressing the button or . Press TIMER button at the second time, set the rest time with pressing the button or . Press TIMER button at the third time, confirm the setting, then the rest time to next automatical switching-on could be read on the display of the machine. Note: It can be set to automatically turn off or on in 0.5-24 hours. Each press of the buttons will increase or decrease the timer. The Timer can be set in 0.5 hours increment below 10 hours and 1 hour increment for 10 hours or above. The SET light will turn on while setting. To cancel the setted function, press the TIMER button again. 3. Power Button: Turn the air conditioner on and off. 4. Mode Button: Press the mode button to cycle through the various modes: Cool, Dry, Fan and Auto. 13 11.WIFI remote function please read the APP user manual. 6. Eco Button: When the unit is in ECO mode, the light will turn on. In ECO mode, the unit will turn-off once the room is cooled to the user set temperature. The fan will also be off at this point. The unit will turn back on when the room temperature rises above the user set temperature. 7. Sleep Button: Press the SLEEP button, the Sleep Light will be on after 10s, and all the left lights will be off. In SLEEP mode, the air-conditioner will automatically adjust the temperature and fan speed to make the room more comfortable during the night. The set temperature will automatically raise by 1 every 30-60 minutes and at most change six times until the set temperature is 28 . And every running time depends on the set temperature. 8. Fan Speed Button: Press the FAN SPEED button to choose the fan speed options. You can choose Hi, Med, Lo or auto speed in COOL mode and choose Hi, Med, Lo in FAN mode. 9. Filter Button: When the Filter Check light is off, it is useless to press the Filter Check button. When the Filter Check light is on, it can turn off the light by pressing the Filter Check button. After the compressor works for 500 total hours, the Filter Check light will turn on to remind the user to clean the filter. 10. Directional Louvers: To direct the airflow, horizontal wheel to control the horizontal direction, air deflector to control the vertical direction. air deflector horizontal wheel air deflector 14 1 5. Timer: Use these buttons on the control panel and remote to set the Timer. Timer Off: The timed stop is programmed by pressing TIMER button. Set the rest time by pressing the button or until the rest time displayed is to your demand then press TIMER button again. Timer On: When the unit is off, press TIMER button at the first time, set the temperature with pressing the button or . Press TIMER button at the second time, set the rest time with pressing the button or . Press TIMER button at the third time, confirm the setting, then the rest time to next automatical switching-on could be read on the display of the machine. Note: It can be set to automatically turn off or on in 0.5-24 hours. Each press of the buttons will increase or decrease the timer. The Timer can be set in 0.5 hours increment below 10 hours and 1 hour increment for 10 hours or above. The SET light will turn on while setting. To cancel the setted function, press the TIMER button again. 10 6. Auto: Press AUTO button enter into AUTO mode directly. In this mode the fan speed and the temperature are set automatically according to the room temperature (tested by the temperature sensor which is incorporated in the indoor unit.). 1. Power: Turn the air conditioner on and off. 2. Cool: Press the COOL button to COOL mode. 3. 7. Fan Speed: Press the FAN SPEED button to choose the fan speed options. You can choose Hi, Med, Lo or auto speed in COOL mode and choose Hi, Med, Lo in FAN mode. and : Use these buttons on the control panel and remote to increase or decrease the Set Temperature or Timer. Temperature range: 61 ~88 or 16 ~31 . 8. Display: To press the DISPLAY button, it can switch off/on all lights or LED display. 4. Sleep: Press the SLEEP button, the Sleep Light will be on after 10s, and all the left lights will be off. In SLEEP mode, the air-conditioner will automatically adjust the temperature and fan speed to make the room more comfortable during the night. The set temperature will automatically raise by 1 every 30-60 minutes and at most change six times until the set temperature is 28 . And every running time depends on the set temperature. 9. Eco: When the unit is in ECO mode, the light will turn on. In ECO mode, the unit will turn-off once the room is cooled to the user set temperature. The fan will also be off at this point. The unit will turn back on when the room temperature rises above the user set temperature. 10. Fan Only: Press the Fan Only button to FAN ONLY mode. 15 16 17 18 FCC Caution. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. The distance between user and device should be no less than 20cm. APP User Manual Please scan the QR code to download the latest App software. Or download “Smart Life-smart home ” from APP Store or Google Play. The latest App software includes air conditioner, dehumidifier and Portable air conditioner. For Android For IOS Service condition Thank you for choosing our air conditioner. This manual apply to the air conditioners which has WiFi function. Please read the manual carefully before using the product and keep it properly for further review. Please do not unplug the WIFI module by yourself. For technical update, there may be deviation of the actual items from the manual. We express our apologies. Please refer to the actual product. Mention FCC ID: 2AJCLETWAC-TUWF This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Install the APP When download the APP software, you can install it in your smart phone. After installation, you can find the “Smart Life” icon on your phone desk. Activate QR code 1. When you first time enter the App, it will display activation interface, you can select scan activation QR code (click “Scan” button and scan the activation QR code in below page) or input “activation code” words (in below page), click “activate” button to active it. 2. Air conditioner activation QR code 3. Air conditioner activation code WORDS:_____________ Register user account When you first time use the App, you need to register an account. Click “Register” button to enter to the register interface. You can register with email or “Register with Mobile number”. Login user account 1. Register account login, fulfill the registered email or phone number account and password, press “Login” button. 2. Phone number login, press “Sign in with SMS” button to enter the next page, fulfill the phone number and press “get” button to receive the confirm code, and fill in, then press “Login” button. 3. You also can use the Facebook or Twitter account to login by the below part. Forget password If you forget the password, you can retrieve it by below process. 1. Press the “Forgot password” button to enter the next page. 2. Fulfill the registered phone number or email account, press“Next” button to enter the next page. 3. You will receive the verification code, fulfill it, and set the new password, press “confirm” button to finish. Add the device 1. Press “Add Device” button to next page, select the product type. 2. There are two methods to do the device match, “CF” or “AP mode”. You can choose by the different button.. Add the device (CF mode) For CF Mode 1. The system defaults to CF mode at first, Press “Next Step” to continue. 2. Select the home router, and fulfill the password of router, press “Next” to continue. 3. The APP software will automatically to do the device match. 4. After match successfully, the page will display the prompt as below. 5. You can “Rename” the device name as you like, or share with family, or press “Done” to start to control the device. Add the device (AP mode) For AP mode 1. Click the “AP Mode” to the “AP” page. Press “Next Step” to continue. 2. Select the home router, fulfill the password, press “Next” to continue. 3. Select the AC Device as name “SmartLife-XXX” at the WLAN setting, then back to the APP interface. The APP will automatically do match. Add the device (AP mode) 4. After match successfully, the page will display the prompt as below. 5. If match failed, the APP will mention it, and press “Retry” to try again. Air conditioner Delete the device or Modify device name Go back to “Device list” page at first. Slide the device name toward the left side, you can choose to delete it, or modify the device name as you like. Air conditioner control 1. Click the air conditioner name to enter the control interface. Turn ON/OFF. Adjust the setting temperature. Turn ON/OFF. Display the setting temperature. Decrease setting temperature. Increase setting temperature. *For App update, there maybe deviation of the actual items from what is on the manual without prior notice. We express our apologies. 2. Adjust the different operating mode, Cool, Heat, Dry, Fan, Auto mode. Click the “Mode” button, and choose different running mode as you like. For the cooling only unit, the heat mode is no useful. For Dry mode, at the first 3 minutes, the APP temperature display may be little different from the unit display, caused by the unit temperature fast changing. Air conditioner control 3. Click the “Fan” button, choose different fan speed, Low, Med, High, Auto. Air conditioner 4. Other function control can by selected by “Function” button, Sleep, ECO. When Sleep mode, the fan speed will be fixed to low speed. Air conditioner Air conditioner control 5. Setting Timer function. Click the “Timer” button, the APP will enter to timer setting interface. It will display the task scheduler set before. You can longterm press to edit or build a new scheduler by “Add Timer” button. Air conditioner 6. Click “ON” or “OFF” button to set Timer ON or Timer OFF. You can set Hour, Minute, operate Mode, operate Fan Speed, operate Temperature, also can set the weekly Timer. After finish the setting, click the button to cancel or confirm. Timer cancel Timer submit Hour setting Minute setting Weekly setting Mode setting Fan Speed setting Timer ON/OFF setting Temperature setting 10 Air conditioner control 7. More setting. From the right-up corner, you can do more function setting, as Modify Device Name, Device Sharing, Device information, Feedback, Check for firmware update, Remove Device, Restore Manufacture setting. Air conditioner 8. Profile. You can manage your personal information. It includes: a, Account information. b, Scan QR code: Developers could preview the control interface. c, Share Device: Display user ‘ s device sharing information. d, Message Centre: Displays all messages that system sent to users. e, Feedback: Where users could submit feedback online. f, About: Displays the current App version information. 11 Air conditioner control 9. Pattern unlock. Tap “Pattern unlock” to set up your App unlock pattern. After it is enabled, you need to draw the pattern to unlock the App. Trouble shooting 12
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Author : Microsoft Create Date : 2017:09:28 10:22:12+08:00 Modify Date : 2017:09:28 10:22:12+08:00 XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Format : application/pdf Creator : Microsoft Title : User Manual.pdf Creator Tool : CorelDRAW Version 9.397 Metadata Date : 2017:09:28 09:10:24+08:00 Producer : Acrobat Distiller 9.0.0 (Windows) Document ID : uuid:0c58b71a-b360-4073-be52-7ee7d177d688 Instance ID : uuid:ccc772bd-fe24-43d6-899e-bbcc94c82bc7 Page Count : 36EXIF Metadata provided by EXIF.tools