TCL Communication A026 GSM Quad-band / UMTS Penta-band / LTE Deca-band mobile phone User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3423911
Application ID	LZWdJNTBpVVhODZTFVg+4g==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	28.56kB (357005 bits)
Date Submitted	2017-06-13 00:00:00
Date Available	2017-06-14 00:00:00
Creation Date	2017-10-22 20:35:14
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-10-22 20:35:14
Document Title	User manual
Document Creator	Adobe InDesign CS6 (Windows)

CQF37G001AAC
DTEK50 STH100-2 Smartphone
Safety and Product Information
MAT-62985-001
When this icon appears on your smartphone, there may be a problem with the battery or the battery connection. Try restarting your smartphone. If the
icon still appears, return your smartphone to qualiied service personnel for repair.
Safety information
Before you start using your BlackBerry smartphone (hereinafter referred to as smartphone), review the safety and regulatory information provided in this document. Keep this
document in a safe place so that you can refer to it whenever you need it.
In some countries there may be restrictions on using Bluetooth enabled devices and wireless devices with encryption software. Check with your local authorities for the restrictions
in your area.
Important safety precautions
Driving and walking safely
Do not use your smartphone while you drive. Give your full attention to driving; driving safely is your irst responsibility. You are responsible for knowing and obeying the laws and
regulations regarding the use of wireless devices in the areas where you drive.
Use only approved batteries and chargers with your smartphone. Use of batteries or chargers that have not been approved by the manufacturer
might present a risk of ire or explosion, which could cause serious harm, death, or property loss.
Store your smartphone safely before driving your vehicle. If your vehicle is equipped with an air bag, do not place your smartphone or any accessories above the air bag, or in the air
bag deployment area. If the air bag inlates, serious injury could result.
Use only the manufacturer approved holsters. Use of holsters that have not been approved by the manufacturer may cause your smartphone to
exceed radio frequency exposure standards.
Radio frequency signals might afect improperly installed or inadequately shielded electronic systems in motor vehicles. Check with the vehicle manufacturer or its representative.
If any equipment has been added to your vehicle, you should also consult the manufacturer of that equipment for information on radio frequency signals.
Keep the smartphone at least 0.20 in. (5 mm) away from your body. When you carry the smartphone on your body, use only accessories equipped
with an integrated belt clip, and if the accessory is not supplied by the manufacturer, verify that the accessory does not contain metal. If you do
not follow these guidelines, your smartphone may exceed radio frequency exposure standards. Whether there are any long term health efects of
exceeding radio frequency exposure standards is a subject of ongoing scientiic study.
Do not use your smartphone while walking or engaging in any activity that requires your full attention. Inattention to traic or other pedestrian hazards could result in serious harm,
death, or property loss.
Accessories
For more information about the compliance of this smartphone with the FCC radio frequency emission guidelines, visit www.fcc.gov/oet/ea/fccidand
search for the FCC ID for your smartphone listed below.
Use only those accessories approved by the manufacturer for use with this particular smartphone model. Using any accessories not approved might invalidate any approval or
warranty, might result in the smartphone becoming inoperative, and might be dangerous.
•DTEK50STH100-2 smartphone (model number RJD211LW): FCC ID 2ACCJA026
Carrying solutions: Your smartphone might not come with a holster (body-worn accessory). If you wear your smartphone on your body, always put your smartphone in a smartphone
holster equipped with an integrated belt clip supplied or approved by the manufacturer. If you do not use a holster equipped with an integrated belt clip supplied or approved by
the manufacturer when you carry your smartphone, keep your smartphone at least 0.59 in. (15 mm) from your body when the smartphone is transmitting. When using any data
feature of your smartphone (for example, email messages, PIN messages, MMS messages, or browser service), with or without a USB cable, hold your smartphone at least 0.59 in.
(15 mm) from your body. Using accessories that are not supplied by or approved by the manufacturer might cause your smartphone to exceed radio frequency exposure guidelines.
Whether there are any long term health efects of exceeding radio frequency exposure standards is a subject of ongoing scientiic study. For more information about radio frequency
exposure, see the “Compliance information” section of this document.
Your smartphone is designed to be operated in temperatures between 32 and 95°F (0 and 35°C). Use of your smartphone outside of the recommended
temperature range could cause damage to your smartphone or lithium-ion battery.
Do not rely on your smartphone for emergency communications. The wireless networks that are necessary to make emergency calls or send
messages are not available in all areas, and emergency numbers, such as 911, 112, 119, or 999, might not connect you to emergency services in all
areas.
Most the manufacturer approved carrying solutions for smartphones (for example, holsters, totes, and pouches) incorporate a magnet. Do not place items containing magnetic strip
components, such as debit cards, credit cards, hotel key cards, phone cards, or similar items, near such carrying solutions. The magnet might damage or erase the data stored on
the magnetic strip.
Magnetometer
Your smartphone and smartphone accessories are not intended for children. If you allow a child to use or handle your smartphone or smartphone
accessories, ensure you strictly supervise the child. Your smartphone contains small parts that are choking hazards to children.
Your smartphone includes a magnetometer. The magnetometer is used by applications such as the Compass. Magnets or devices that contain magnets, such as holsters,
headphones, or monitors, might negatively afect the accuracy of the magnetometer. Do not rely on applications that use the magnetometer to determine your location, particularly
in an emergency situation.
Media
Keep your smartphone away from medical devices, including pacemakers and hearing aids, because they might malfunction and cause serious harm
or death to you or others.
Do not put your smartphone in contact with liquids because this might cause a short circuit, a ire, or an electric shock.
When you use your smartphone speakerphone, never hold the smartphone to your ear. Serious and permanent hearing damage could occur.
Certain jurisdictions might prohibit or restrict your use of certain features on your smartphone. When taking, processing, or using pictures, obey all laws, regulations, procedures,
and policies, including, without limitation, any applicable copyright, personal privacy, trade secret, or security laws that may be in place in your jurisdiction. Honor the personal
rights of others. Copyright protections might prevent you from copying, modifying, transferring, or forwarding some pictures, music (including ring tones), or other content.
Audio files: Permanent hearing loss might occur if you listen to audio iles at high volumes, particularly with headphones. Avoid increasing the volume of your headphones to block
out noisy surroundings. If you experience ringing in your ears or muled speech, consult a physician.
Camera: If your smartphone has a camera, do not aim the camera directly at the sun or any other bright light. Doing so could cause serious damage to your eyes or damage your
smartphone. When using the camera lash, keep the camera lash LED aperture at least 19.69 in. (50 cm) from the subject’s eyes.
Antenna
Use only the supplied integrated antenna. Unauthorized antenna modiications or attachments could damage the smartphone and might violate U.S. Federal Communications
Commission (FCC) regulations or the relevant laws and regulations for your country.
Exposure to lashing lights on your smartphone can cause epileptic seizures or blackouts and might be dangerous to you or others. In the event that
you experience, or your use of your smartphone causes in others, any disorientation, loss of awareness, twitching, convulsions, or any involuntary
movements, stop using your smartphone immediately and consult a physician. The LED notiication light is located on the front of your smartphone,
in the upper-right corner. If your smartphone model has a camera, the camera lash LED aperture is located on the back of your smartphone,
either above or to the right of the camera lens. If you are susceptible to epileptic seizures or blackouts, consult your physician before you use your
smartphone.
Do not use your smartphone while driving unless you are permitted by law to use the smartphone in hands-free mode. Using your smartphone while
driving could put you and others at greater risk of an accident causing serious injury, death, or property loss.
Interference with electronic equipment
Most modern electronic equipment is shielded from radio frequency signals. However, certain electronic equipment might not be shielded against the radio frequency signals from
your smartphone.
Pacemakers: Consult a physician or the manufacturer of your pacemaker if you have any questions regarding the efect of radio frequency signals on your pacemaker. Verify that
you are using your smartphone in accordance with the safety requirements associated with your particular pacemaker, which might include the following requirements: always
keep your smartphone more than 7.88 inches (20 cm) from the pacemaker when your smartphone is turned on, do not carry your smartphone in your breast pocket, and use the
ear opposite the pacemaker for making and receiving calls on your smartphone to minimize the potential interference. If you have any reason to suspect that interference is taking
place, turn of all wireless connections on your smartphone immediately, stop using your smartphone, and consult a physician.
Hearing aids: Some digital wireless devices might interfere with some hearing aids. In the event of such interference, consult your wireless service provider or contact the
manufacturer of your hearing aid to discuss alternatives.
Do not use your smartphone in the presence of gas fumes because it might present a risk of ire or explosion.
Your smartphone includes a magnetometer, which is used by applications such as the Compass. If an application that uses the magnetometer causes interference with your hearing
aid, close the application.
Other medical devices: If you use any other personal medical device, consult the manufacturer to determine if your medical device is adequately shielded from external radio
frequency energy. Your physician might be able to assist you in obtaining this information.
Do not dispose of your smartphone in a ire because this might cause an explosion resulting in serious injury, death, or property loss.
Turn of your smartphone on aircrafts. Using your smartphone on an aircraft might afect aircraft instrumentation, communication, and performance;
might disrupt the network; might otherwise be dangerous to the operation of the aircraft, its crew, and its passengers; and might be illegal.
Health care facilities: Turn of all wireless connections on your smartphone in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or
health care facilities might be using equipment that could be sensitive to external radio frequency energy.
Aircraft: Federal Aviation Administration (FAA) and Federal Communications Commission (FCC) regulations, and other relevant laws and regulations for your country, prohibit using
the radio of wireless devices while in the air. Turn of all wireless connections on your smartphone before boarding an aircraft. The efect of using the smartphone with wireless
connections turned on in an aircraft is unknown. Such use might afect aircraft instrumentation, communication, and performance, might disrupt the network, might otherwise
be dangerous to the operation of the aircraft, and might be illegal. With all wireless connections on your smartphone turned of, use only nonradio based device applications in
accordance with airline regulations for electronic devices.
Dangerous areas
Smartphones are not intrinsically safe and cannot be used in the presence of explosive fumes, explosive dust, or other explosive chemicals. Sparks in
such areas could cause an explosion or ire resulting in serious injury, death, or damage to property.
Your smartphone is not an intrinsically safe device and is not suitable for use in hazardous environments, where intrinsically safe devices are required, including without limitation, in the
presence of gas fumes, explosive dust situations, operation of nuclear facilities, aircraft navigation or communication services, air traic control, and life support or weapons systems.
Potentially explosive atmospheres: If you are in any area with a potentially explosive atmosphere, turn of all wireless connections on your smartphone and obey all signs and
instructions. Sparks in such areas could cause an explosion or ire resulting in bodily injury or even death.
Areas with a potentially explosive atmosphere are often, but not always, clearly marked. They include fueling areas such as gasoline or petrol stations; below deck on boats; fuel or
chemical transfer or storage facilities; vehicles using liqueied petroleum gas, such as propane or butane; areas where the air contains chemicals or particles, such as grain, dust, or
metal powders; and any other area where you would normally be advised to turn of your vehicle engine.
Using your smartphone safely
Do not use the phone on your smartphone to report a gas leak in the vicinity of the leak. Leave the area and make the call from a safe location, if the phone is available and active on
your smartphone.
•
•
•
Blasting areas: When in a “blasting area” or an area that indicates that two-way radios should be turned of, to avoid interfering with blasting operations, turn of all wireless connections
on your smartphone and obey all signs and instructions.
•
•
•
•
•
•
Do not place heavy objects on your smartphone.
Do not attempt to modify or service your smartphone.
Do not attempt to cover or push objects into openings on your smartphone unless instructed to do so in the smartphone documentation supplied by the manufacturer. This action
might cause a short circuit, a ire, or an electric shock.
Do not use sharp objects on the screen.
Do not use excessive force on the screen.
Do not use your smartphone or smartphone accessories near water (for example, near a bathtub or a sink, in a wet basement, or near a swimming pool).
Do not place your smartphone or smartphone accessories on any unstable surface. The smartphone or smartphone accessories could fall, thereby potentially causing serious
injury to a person and serious damage to the smartphone or smartphone accessory.
The screen of your smartphone is made of glass. The glass could crack or chip if your smartphone is dropped or force is applied to the glass. If cracked or chipped, do not touch
the glass until the screen has been repaired.
When using your smartphone, take frequent breaks. If you experience any discomfort in your neck, shoulders, arms, wrists, hands (including thumbs and ingers), or other parts
of the body when using your smartphone, cease use immediately. If discomfort persists, consult a physician.
Operating and storage temperatures
Your smartphone and smartphone charger are designed to be operated and stored within the temperatures outlined below:
Smartphone operating: 32 to 95°F (0 to 35°C)
Smartphone storage (less than 3 months): -4 to 95°F (-20 to 35°C)
Smartphone storage (3 months or more): 71.6 to 82.4°F (22 to 28°C)
Charger operating: 32 to 95°F (0 to 35°C)
Charger storage: -22 to 158°F (-30 to 70°C)
Usage or storage of your smartphone or smartphone accessories outside of the recommended temperature ranges could cause your smartphone to become hot which could result
in serious injury or death, or could cause damage to the smartphone, the accessories, or the lithium-ion battery.
Electrical safety
Keep your smartphone or smartphone accessories away from heat sources, such as radiators, heat registers, stoves, or other apparatus (including ampliiers) that produce heat. If
you are not going to use your smartphone for more than two weeks, turn of the power.
Charge the smartphone using only charging accessories provided by the manufacturer or speciically approved by the manufacturer for use with this smartphone. Use of any other
accessory might present a risk of ire, explosion, battery leakage, or other hazard, which could cause serious harm, death, or property loss, and might invalidate any warranty.
Smartphone cleaning and repair
Approved charging accessory models for the DTEK50 smartphone
Charging cables: CDA0000043C2, CDA0000043C8
AC chargers: CBA0059AG4C1, CBA0059AA1C1, CBA0059AA1C6, CBA0059AB2C1, CBA0059AC1C1, CBA0059AJ2C4, CBA0059AB3C1
Use the charging accessories provided with the smartphone or any other the manufacturer approved charging accessories only from the type of power source indicated on the
marking label. Before you use any power supply, verify that the mains voltage is in accordance with the voltage printed on the power supply. Connect the smartphone only to CTIA
certiied adapters, products that bear the USB-IF logo, or products that have completed the USB-IF compliance program.
Do not overload power outlets, extension cords, or convenience receptacles because this might result in a risk of ire or electric shock. To reduce the risk of damage to the cord or
the plug, pull the plug rather than the cord when you disconnect the charging accessory from the power outlet or convenience receptacle.
Protect the power cord from being walked on or pinched, particularly at convenience receptacles and the point where the power cord connects to the smartphone. Always route the
power cord in a way that reduces the risk of injury to others, such as tripping or choking. Unplug charging accessories during lightning storms or when not being used. Do not use
charging accessories outside or in any area exposed to the elements.
For more information about connecting the power supply, see the documentation that came with your smartphone.
Cleaning: Do not use liquid, aerosol cleaners, or solvents on or near your smartphone or smartphone accessories, including the battery. Clean only with a soft dry cloth. Disconnect
any cables from the computer and unplug any charging accessories from the electrical outlet before cleaning either your smartphone or the charging accessory.
Repair: Do not attempt to modify, disassemble, or service your smartphone or any charging accessory. Do not attempt to replace your nonremovable battery. Only qualiied service
personnel should perform repairs or battery replacements to your smartphone or charging accessories, and should use only the battery that the manufacturer speciies for use with
your particular smartphone model.
If any of the following situations occur, disconnect the power supply cables from the computer or electrical outlet and take your smartphone or charging accessory for service to
qualiied service personnel:
• The power supply cord, plug, or connector is damaged.
• Liquid has been spilled or objects have fallen into the smartphone or charging accessory.
• The smartphone or charging accessory has been exposed to rain or water.
• The smartphone or charging accessory becomes very hot to the touch.
• The smartphone or charging accessory has been dropped or damaged in any way.
• The smartphone or charging accessory does not operate normally by following the instructions in the user documentation.
• The smartphone or charging accessory exhibits a distinct change in performance.
To buy accessories for your smartphone, contact your wireless service provider.
To reduce the risk of ire or electric shock, adjust only those controls that are covered in the user documentation for your smartphone. An improper adjustment of other controls
might cause damage and will often require extensive work by a qualiied technician to restore your smartphone, charging accessory, or any other accessory to normal operation.
Battery safety
Failure to observe all safety instructions contained in the user documentation for your smartphone will void the Limited Warranty and might lead to suspension or denial of services
to the ofender, legal action, or both.
Your smartphone contains a nonremovable lithium-ion battery. Do not attempt to remove the battery. Removing the battery will void the Limited Warranty for your smartphone and
could cause damage to the battery.
The battery might present a ire, explosion, chemical burn, or other hazard if mistreated. Do not put your battery in contact with liquids. Do not heat the battery above 140°F (60°C).
Heating the battery above 140°F (60°C) could cause the battery to catch ire or explode.
Smartphone and battery disposal
Do not dispose of either your smartphone or the battery in household waste bins or in a ire.
Do not expose the smartphone and its battery to ire or other external heat sources, such as hot plates, stove tops, space heaters, or ovens, because
this could cause ire or explosion.
Do not attempt to insert foreign objects into the battery. Do not remanufacture, disassemble, modify, crush, puncture, bend, or shred the battery. If the
battery has been remanufactured, disassembled, modiied, crushed, punctured, or altered in any other way, cease use of the battery immediately.
Do not short-circuit the battery or allow metallic or conductive objects to contact the battery terminals.
CAUTION: Do not attempt to remove the battery. The manufacturer speciies batteries for use in smartphones in compliance with IEEE Std 1725. Use of any other batteries might
present a risk of ire, explosion, battery leakage, or other hazard. Please ensure you dispose of used batteries according to the instructions set out in this document.
Your smartphone and battery are recyclable where facilities exist. This symbol is not intended to indicate the use of recycled materials.
Transmitting frequency: 703 to 733 MHz, 824 to 849 MHz, 830 to 840 MHz, 832 to 862 MHz, 880 to 915 MHz, 1710 to 1785 MHz, 1850 to 1910 MHz, 1920 to 1980 MHz, 2555
to 2655 MHz, 2500 to 2570 MHz, 2570 to 2620 MHz
In the United States and Canada, you can recycle your smartphone and battery through the Call2Recycle program. For more information, in the
United States visit www.call2recycle.organd in Canada visit www.call2recycle.ca.
Receiving frequency: 758 to 803 MHz, 791 to 821 MHz, 869 to 894 MHz, 875 to 885 MHz, 925 to 960 MHz, 1805 to 1880 MHz, 1930 to 1990 MHz, 2110 to 2170 MHz, 2300 to
2400 MHz, 2555 to 2655 MHz, 2570 to 2620 MHz, 2620 to 2690 MHz
Wi-Fi network radio specifications:
Wireless LAN standard: IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Dispose of your smartphone and its battery in accordance with the laws and regulations in your area governing disposal of such cell types.
Transmitting and receiving frequency for IEEE 802.11a/IEEE 802.11b/IEEE 802.11g/IEEE 802.11n: 2.412 to 2.472 GHz <20 dBm
Transmitting and receiving frequency for IEEE 802.11a/IEEE 802.11ac/IEEE 802.11n: 5.180 to 5.825 GHz <17 dBm
Compliance information
Bluetooth radio specifications:
Exposure to radio frequency signals
Single-band support: ISM 2.4 GHz
The smartphone radio is a low-power radio transmitter and receiver. It is designed to comply with Federal Communications Commission (FCC) and The Council of the European
Union guidelines and limits, as well as other relevant international guidelines regarding safety levels of radio frequency exposure for wireless devices. These guidelines were
developed by independent scientiic experts, governments, and organizations including the Institute of Electrical and Electronics Engineers Standard (IEEE), National Council on
Radiation Protection and Measurements (NCRP) and The National Council on Radiation Protection and Measurements (NCRP).
To maintain compliance with FCC, EU, and other relevant international radio frequency exposure guidelines and limits, keep the smartphone at least 0.59 in. (1.5 cm) away from
your body. When you carry the smartphone on your body, use only accessories equipped with an integrated belt clip that are supplied or approved by the manufacturer. If you
use a body-worn accessory not supplied by the manufacturer, verify that the accessory does not contain metal and keep the smartphone at least 0.59 in. (1.5 cm) from your
body.
Transmitting and receiving frequency: 2402 to 2480 MHz <11.5dBm
To reduce radio frequency exposure: (i) use the smartphone in areas where there is a strong wireless signal; (ii) use hands-free options; and (iii) reduce the amount of time spent on
calls, or send an email, text message, or BBM message instead.
Legal notice
Specific absorption rate data
THIS WIRELESS DEVICE MODEL MEETS GOVERNMENT REQUIREMENTS FOR EXPOSURE TO RADIO WAVES WHEN USED AS DIRECTED IN THIS SECTION.
The smartphone is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission
(FCC) of the U.S. Government, and recommended by The Council of the European Union when used as directed in the previous section. These limits are part of comprehensive
guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientiic
organizations through periodic and thorough evaluation of scientiic studies. The exposure standard for wireless devices employs a unit of measurement known as the Speciic
Absorption Rate, or SAR.
The SAR limit set by the FCC is 1.6W/kg*. The SAR limit recommended by The Council of the European Union is 2.0W/kg**. Tests for SAR are conducted using standard operating
positions speciied by the FCC with the device transmitting at its highest certiied power level in all tested frequency bands. Although the SAR is determined at the highest certiied
power level, the actual SAR level of the device while operating can be well below the maximum value. This is because the device is designed to operate at multiple power levels so
as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output.
The highest SAR value for this smartphone when tested for use at the ear is:
Smartphone
SAR (W/kg) for 1 g (FCC)
SAR (W/kg) for 1 g (India)
SAR (W/kg) for 10 g (CE)
DTEK50STH100-2 smartphone (model number
RJD211LW)
0.73
0.368
0.557
The highest SAR value for this smartphone when tested in a the manufacturer approved holster with an integrated belt clip or at a distance of 0.59 in. (1.5 cm) from the body, is:
Smartphone
SAR (W/kg) for 1 g (FCC)
DTEK50STH100-2 smartphone (model number RJD211LW)
0.63
The highest SAR value for this smartphone when tested at a distance of 0.20 inch (5 mm) from the body is:
Smartphone
SAR (W/kg) for 10 g (CE)
DTEK50STH100-2 smartphone (model number RJD211LW)
1.891
When operating in Mobile Hotspot mode, the highest SAR value for this smartphone is:
Smartphone
SAR (W/kg) for 1 g (FCC)
DTEK50STH100-2 smartphone (model number RJD211LW)
1.15
Body-worn measurements (recommended separation distances) difer among wireless devices, including smartphones, depending upon supplied or available accessories and
applicable The Council of the European Union requirements.
The FCC has granted an Equipment Authorization for this smartphone based on reported SAR levels complying with the FCC radio frequency emission guidelines when the
smartphone is used as directed in this section. SAR information for this smartphone is on ile with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/
eaafter searching for the FCC ID for your smartphone listed below.
Smartphone
FCC ID
DTEK50STH100-2 smartphone (model number RJD211LW)
2ACCJA026
Additional information on SAR can be found at www.ctia.org (CTIA - The Wireless Association), or www.tele.soumu.go.jp/e/index.htm (Telecommunications Bureau of the Ministry of
Internal Afairs and Communications).
* In the United States and Canada, the SAR limit for mobile devices used by the public is 1.6W/kg averaged over 1 g of tissue for the body or head (4.0W/kg averaged over 10 g of
tissue for the extremities - hands, wrists, ankles, and feet).
** In Europe, the SAR limit for mobile devices used by the public is 2.0W/kg averaged over 10 g of tissue for the body or head (4.0W/kg averaged over 10 g of tissue for the
extremities - hands, wrists, ankles, and feet). Studies suggest that the standard incorporates a substantial margin of safety to give additional protection for the public and to
account for any variations in measurements.
FCC compliance statement (United States)
FCC Class B Part 15
This smartphone complies with Part 15 of the Federal Communications Commission (FCC) Rules. Operation is subject to the following two conditions: (1) this smartphone may not
cause harmful interference, and (2) this smartphone must accept any interference received, including interference that may cause undesired operation.
CAUTION: Changes or modiications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the manufacturer’s instructions, may cause interference harmful to radio communications.
There is no guarantee, however, that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning on and turning of the equipment, the user is encouraged to try to correct the interference by one or more of the following measures: reorient
or relocate the receiving antenna, increase the separation between the equipment and receiver, connect the equipment to an outlet on a circuit diferent from that to which the
receiver is connected, or consult the dealer or an experienced radio or TV technician for help.
US Information Concerning the Federal Communications Commission (“FCC”) Requirements for Hearing Aid Compatibility with Wireless Devices
When wireless devices are used near hearing devices (such as hearing aids and cochlear implants), users may detect a buzzing, humming, or whining noise. Some hearing devices
are more immune than others to this interference, and wireless devices also vary in the amount of interference that they generate.
The wireless telephone industry has developed ratings to assist hearing device users in inding wireless devices that may be compatible with their hearing devices. Not all wireless
devices have been rated. Wireless devices that are rated will have the rating displayed on the box together with other relevant approval markings.
The ratings are not guarantees. Results will vary depending on the user’s hearing device and hearing loss. If your hearing device is vulnerable to interference, you may not be able to
use a rated wireless device successfully.
Consulting with your hearing health professional and testing the wireless device with your hearing device is the best way to evaluate it for your personal needs.
How the ratings work
M-Ratings: Wireless devices rated M3 or M4 meet FCC requirements and are likely to generate less interference to hearing devices than wireless devices that are not labeled. M4 is
the better or higher of the two ratings.
T-Ratings: Wireless devices rated T3 or T4 meet FCC requirements and are likely to be more usable with a hearing device’s telecoil (“T Switch” or “Telephone Switch”) than unrated
wireless devices. T4 is the better or higher of the two ratings. (Note that not all hearing devices have telecoils in them.)
Hearing devices may also be measured for immunity to this type of interference. Your hearing device manufacturer or hearing health professional may help you ind results for your
hearing device. The more immune your hearing aid is, the less likely you are to experience interference noise from wireless devices.
For more information about the actions that the FCC has taken with regard to hearing aid compatibility with wireless devices and other steps that the FCC has taken to ensure that
individuals with disabilities have access to telecommunications services, visit www.fcc.gov/cgb/dro.
EU regulatory conformance
The manufacturer hereby declares that this smartphone is in compliance with the essential requirements and other relevant provisions of Radio Equipment Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address: http://www.blackberrymobile.com/EU_doc/.
The description of accessories and components, including software, which allow the radio equipment to operate as intended, can be obtained in the full text of the EU declaration
of conformity at the following internet address: http://www.blackberrymobile.com/EU_doc/.
If you have a Wi-Fi enabled smartphone, your smartphone may be operated on Wi-Fi networks in all European Union member countries. This equipment may be operated in Turkey.
The Oicial Journal of the European Union Commission Decision of 12 February 2007 states that in the frequency band 5.150 to 5.350 GHz, wireless access systems (WAS),
including radio local area networks (RLANs), shall be restricted to indoor use.
BE
BG
CZ
DK
DE
EE
IE
EL
ES
FR
HR
IT
CY
LV
NO
IS
LT
LU
HU
MT
NL
AT
PL
PT
RO
SI
SK
FI
SE
UK
LI
CH
Additional regulatory conformance
Speciic details about compliance to the standards and regulatory bodies for your smartphone may be obtained from the manufacturer.
To view FCC ID, ISEDC Certiication Number, model, and compliance information for your smartphone, swipe down from the top of the screen once using two ingers, or twice using
one inger. Tap Settings > About phone > Regulatory approvals.
Product information: DTEK50STH100-2 smartphone
Mechanical properties:
• Weight: approximately 4.76 oz (135 g) including lithium-ion battery
• Size (L x W x H): 5.8 x 2.9 x 0.29 in. (147 x 72.5 x 7.4 mm)
• 3-GB memory, 16-GB application storage, microSD card slot
Power specifications:
Nonremovable, rechargeable lithium-ion battery
Supports 3V, 1.8V nano SIM cards
Port compatibility for data synchronization and charging: micro USB 2.0
Mobile network radio specifications:
LTE band support: LTE 700, LTE 800, LTE 900, LTE 1800, LTE 1900, LTE 2100, LTE 2300, LTE 2500, LTE 2600-MHz bands <23.5 dBm
HSPA+ support: UMTS 800/UMTS 850, UMTS 900, PCS 1900, IMT 2100 MHz bands <23.5 dBm
GSM band support: GSM 850, GSM 900 <33.5 dBm; DCS 1800, PCS 1900-MHz bands <31 dBm
Power class: Class 1 (DCS 1800, PCS 1900), Class 3 (UMTS, LTE), Class 4 (GSM 850) as deined in GSM 5.05, Class 4 (GSM 900) as deined in GSM 02.06, Class E2 (GSM 850,
GSM 900, DCS 1800, PCS 1900)
Bluetooth Class 1.5
If your smartphone supports NFC technology, the following specifications apply:
Operating frequency: 13.56 MHz <42dBµA/m at 10m
Supported modes: reader/writer, card emulation, peer-to-peer
Trademarks, including but not limited to BLACKBERRY and EMBLEM Design, are the trademarks or registered trademarks of BlackBerry Limited and used under license by TCL
Communication Ltd.
Bluetoothis a trademark of Bluetooth SIG. CTIA - The Wireless Associationis a trademark of CTIA - The Wireless Association. GSM is a trademark of the GSM MOU Association.
IEEE802.11a, 802.11b, 802.11g, and 802.11n are trademarks of the Institute of Electrical and Electronics Engineers, Inc. Wi-Fi is a trademark of the Wi-Fi Alliance. All other
trademarks are the property of their respective owners. This documentation including all documentation incorporated by reference herein such as documentation provided or made
available on the Manufacturer website is provided “as is” and without condition, endorsement, guarantee, representation or warranty, or liability of any kind by the manufacturer
and its ailiated companies, all of which are expressly disclaimed to the maximum extent permitted by applicable law in your jurisdiction.
Manufacturer: TCL Communication Ltd.
Address: 5/F, Building 22E, 22 Science Park East Avenue, Hong Kong Science Park, Shatin, NT, Hong Kong
For more information you can go to www.blackberrymobile.com

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 1
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:20a0f626-9704-11f2-0000-02c7314339d4
Producer                        : GPL Ghostscript 9.18
Modify Date                     : 2017:07:02 05:30:37Z
Create Date                     : 2017:07:02 05:30:37Z
Creator Tool                    : UnknownApplication
Document ID                     : uuid:20a0f626-9704-11f2-0000-02c7314339d4
Format                          : application/pdf
Title                           : Untitled

EXIF Metadata provided by EXIF.tools