TCL Communication B072 MOVETIME Track & Talk watch User Manual

TCL Communication Ltd. MOVETIME Track & Talk watch Users Manual

Contents

Users Manual

CJB1F61ALAAAMOVETIME Track&Talk watchQuick Start Guide
2Know your watchOverviewFront BackBCDEFGAHIJAWatch-buonBSpeakerCVolume + On the Home screen: Press to open the phonebook, press again to choose contacts.In the List mode: Press to increase the volume or page up.DVolume - On the Home screen: Press to  enter  the  voice messages list. In the List mode: Press to decrease the volume or page down.When you have an incoming voice call, short press to answer.Press for 3 seconds to start recording.
3ESOS key Emergency calls: Long press the ‘SOS’ key for at least 3 seconds.FPower key •  Power on/o.•  Enter into the volume list.•  When you have an incoming call, short press to reject the call.•  On  the  Home  screen,  short  press  to  enter the volume mode.•  On all screens other than Home, short press once to go back.•  Depress the buon for at least 8 seconds to iniate a system reboot.GMicrophoneHWristbandISIM slotJCharging portNotes: •  The screen will light up by pressing any key.•  Watch only supports GPRS network and Nano SIM card without encrypng PIN code.ScreenBaery powerTimeDateG: GPRSR: RoamingStepsSignal strengthVoice SMS ps When the watch is roaming, the right side of the signal bar will appear “R”. At the same me, prompt informaon will display in the message bar in the applicaon. Note: Consult the local operators to open the roaming service.
4Inserng Nano SIM card
5Basic operaons on your watchPower on/oPress and  hold  the Power key for 3  seconds to power  on/o your watch.Press and  hold  the  Power key  for 8  seconds to  reboot when  your watch crashes.SOSPress and hold the SOS key for 3 seconds on any screen (except the incoming/ongoing/dialing call screen) to call ve key family members.1.  Once  your  watch  has  obtained  a  x  on  your  locaon,  it  will send  details  of  your  locaon  to  10  chosen  family  members. (Applicaon shows the SOS alarm screen with prompt).2.  It will aempt to dial  10 chosen  numbers in  turn. If there is no answer within 10 seconds, it will move onto the next number in the list unl a call successfully connects.3.  If  a  SIM  card  is  not  inserted,  or  if  the  watch  does  not  have  a signal,  the  SOS  feature  will  instead  aempt  to  dial  112 (Emergency  services). You can  press the Power Key at  any me to either cancel the call setup or hang up the call. Note: Currently emergent number is not set by default, you can customize it.Note: Press the Power key to interrupt the call.Sending a voice message1.  Press Volume - for 3 seconds to start recording.2.  Release to stop recording, as well as to send the voice message.3.  When nishes sending, it will go back to the last screen.Note: Nocaon icon will ash  when your watch receives a voice message.Voice message management•  Press Volume + to scroll up the menu.•  Press Volume - to scroll down the menu.•  Short press the Power key to go back to the Home screen.Note: The storage is limited to 30 voice messages. If there are more than 30 messages, the message will be overwrien automacally.Calling and answering1.  Short press Volume + to enter the family number list.2.  Short press Volume + to choose the next family number.
63.  Press Volume - for 3 seconds to send a voice message to chosen family number.Note: Press the Power key to go back to the Home screen.Volume adjustment•  Short  press  power on/o  buon  rst,  then  press  Volume + to increase the volume.•  Short  press  power  on/o  buon  rst,  then  press  Volume - to decrease the volume.Note: Decrease the volume to mute your watch. When you have an incoming call, your watch will vibrate.Power o & Airplane modeLong  press  the  Power key  for  3  seconds  to  enter  “Power  o  & Airplane mode” screen.UpdateWatch  will  install  the  rmware  automacally  aer  nishing downloading.
7Using the applicaon from your smartphoneDownload the applicaon from App Store or Google play.PairingInput the IMEI to pair your watchObtain  the  informaon  of  IMEI  number  through  the  package informaon  or  pressing  Volume +/-  and  the  SOS key  in  the  same me  unl the informaon displayed  on  the  screen. Then  input  the IMEI number to the applicaon informaon bar and conrm.Input IMEI and press Conrm.The server will send a random code to your watch and the informaon displayed  on  the  screen  should  be  noted  at  this  me.  Input  the random code to the applicaon informaon bar and conrm.
8Scan the QR code to pair your watchYou can share the QR code to add  some group members. Scanning the QR code will be automacally adjusted according to the interval me. FunconsApplicaon screenSlide le to nd the list   Hide or show the shortcut menu.Click to refresh the watch locaon instantly.
9Click to enter the details page of Electronic fence.Click to jump to the navigaon page.Steps.Power.Click to enter the voice message screen.Click to dial by the watch.Member managementTouch Family numbers to open the member list.Set the local emergency call number here.Note: Each device will have only one administrator, and the user will be regarded as an administrator for the rst me.
10Administrator can  transfer the  management  rights  in  the  members’ management page. Voice messageTouch   to enter the voice screen.When you  create  a voice  message,  the  length  of  each  recording is 15s. You  can dialogue with  some group members,  or dialogue with your children alone.
11Safe zoneTouch   to enter the Safe zone screen.In this funcon, you can set an area on the map as a safe area for your child. When your child leaves the security area, you will be noed. Pay aenon that  the  meliness  of the  nocaon will  depend  on the frequency of the locaon. The longer interval me for posioning that  you  set,  the  me  to  receive  the  nocaon  will  be  relavely longer.Save powerTouch   to enter the power screen.You can choose the locaon frequency according to the daily usage habit. Dierent posioning mode will aect the posioning accuracy and  standby  me.  Choose  the  appropriate  use  mode  according  to the actual scene.
12Mute meTouch Mute me to set the reminder funcon of your watch.You can set to mute  or cancel the vibraon according to the  actual environment in use by your children. Pay aenon that in the silent mode, children can recover the seng by adjusng the volume of the watch. But in  the vibraon mode,  it  need  to  be recovered through applicaon seng.UpgradeTouch Update to upgrade your watch and App.The  status  bar  at  the  boom  will  display  the  related  downloading progress  when  upgrading.  Be  aware  that  the  watch  relies  on  the network when upgrading. It will use a certain amount of data.
13FAQ1.  Unable to obtain the posion of your watchGo to check if your watch has a SIM card or if you’re in a place where can’t  receive  the  signal.  If  SIM  was  inserted  with  device  already powered on, it will not register as this device does not support “hot swap”. In this case user will need to restart (power o/on device) to restore service.2.  Unable to obtain the vericaon code You  need  to  open  the  relevant  SMS  receiving  service.  For  more informaon, consult your local operators. 3.  Waterproof noceThis product has an IP65 rang which means it is protected against water jets. Do not submerge your watch in water, for example when swimming.4.  Posioning accuracyYour  watch  will  provide  three  kinds  of  posioning  modes:  GPS, Wi-Fi, LBS. Posion accuracy will be dierent according to dierent posioning methods. All posion informaon is only for reference in a certain range.5.  Data serviceThe posion informaon of watch and remote seng caused by voice message and applicaon will be working based on the communicaon between GPRS  network  and  cloud server. It will consume the  data which need to be paid by yourself.6.  SOSThe guardian  should be familiar with the  specic  operaon of SOS and the operaon instrucon for children. 7.  Whether the material of this product is harmful to children The  material  in  use  has  passed  related  safety  tesng  for  children, which can ensure the safety of daily use.8.  ChargingWhen the charging port is corroded or dirty, it will seriously aect the charging process which requires a clean surface. Aer playing sports, wipe any sweat from your watch before charging.
149.  Storage and use of locaon data for userFor all the data related to you, we will only use the queries you submit to us. We will not use for any commercial applicaon or development without authorisaon.www.sar-ck.comThis product meets applicable naonal SAR limits of 4W/kg.The specic maximum SAR values can be found in the secon of this user guide.When carrying the product or using it while worn on your body, either use an  approved accessory such  as a holster or otherwise maintain a  distance  of  0  mm  from  the  body  to  ensure  compliance  with  RF exposure requirements. Note  that the product may  be transming even if you are not making a phone call.CercaonWEEE ApprovalThis  device  is  in  compliance  with  the  essenal  requirements  and other  relevant  provisions  of  the  Waste  Electrical  and  Electronic Equipment Direcve 2012/19/EU (WEEE Direcve).This symbol  on device  means that these  products must be taken to collecon points at the end of their life:- Municipal waste disposal centres with specic bins for these items of equipment.- Collecon bins at points of sale.They will then be recycled, prevenng substances being disposed of in the environment, so that their components can be reused.In European Union countries:These collecon points are accessible free of charge.All products with this sign must be brought to these collecon points.In non European Union jurisdicons:Items  of  equipment  with  this  symbol  are  not  to  be  thrown  into ordinary bins if your jurisdicon or your region has suitable recycling
15and  collecon  facilies;  instead  they  are  to  be  taken  to  collecon points for them to be recycled.CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCRDING TO THE INSTRUCTIONSFollowing air regulaon, the baery of your product is not charged. Please charge it rst.RoHs ApprovalThis  device  is  in  compliance  with  the  restricon  of  the  use  of certain hazardous substances in electrical  and electronic equipment Direcve 2011/65/EU (RoHs Direcve).CHARGERSChargers will operate within the temperature range of: 0°C to 40°C.The  chargers designed  for your  device  meet  with  the  standard for safety  of  informaon  technology  equipment  and  oce  equipment use. They are also compliant to the eco design direcve 2009/125/EC. Due to dierent applicable electrical specicaons, a charger you purchased in  one  jurisdicon  may not work  in  another  jurisdicon. They should be used for this purpose only.The  charger  shall  be  installed  near  the  device  and  shall  be  easily accessible.Federal Communicaons Commission (FCC) Declaraon of ConformityThis  device  complies with  part  15  of  the  FCC  Rules.  Operaon  is subject to the following two condions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operaon.Changes  or  modicaons  not  expressly  approved  by  the  party responsible for compliance could void the user’s authority to operate the equipment.This equipment has been tested and found to comply with the limits for a  Class  B  digital  device,  pursuant  to  Part 15  of  the  FCC  Rules. These  limits  are  designed  to  provide  reasonable  protecon against harmful  interference  in  a  residenal  installaon.  This  equipment generates  uses  and  can  radiate  radio  frequency  energy  and,  if  not installed  and  used  in  accordance with  the  instrucons,  may  cause harmful interference to radio communicaons. However, there is no guarantee that interference will not occur in a parcular installaon.If  this  equipment  does  cause  harmful  interference  to  radio  or television  recepon,  which  can  be  determined  by  turning  the equipment o and on,  the user is  encouraged to  try to  correct the interference by one or more of the following measures:
16•  Reorient or relocate the receiving antenna.•  Increase the separaon between the equipment and receiver.•  Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.•  Consult  the  dealer  or  an  experienced  radio/TV  technician  for help.FCC Cauon:Changes  or  modicaons  not  expressly  approved  by  the  party responsible for compliance could void the user‘s authority to operate the equipment.FCC RF Exposure Informaon (SAR):This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communicaons Commission of the United States.During  SAR  tesng,  this  is  set  to  transmit  at  its  highest  cered power level in all tested frequency bands, and placed in posions that simulate RF exposure in usage near the body with the separaon of 0 mm. Although the SAR is determined at the highest cered power level, the actual SAR level of the device while operang can be well below the maximum value. This is because the device is designed to operate at mulple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base staon antenna, the lower the power output.The  exposure  standard  for  wireless  devices  employs  a  unit  of measurement known  as  the  Specic  Absorpon  Rate,  or SAR. The SAR limit set by the FCC is 4W/kg.Tests  for  SAR  are  conducted  using  standard  operang  posions accepted  by  the  FCC  with  the  device  transming  at  its  highest cered power level in all tested frequency bands.The  FCC  has  granted  an  Equipment  Authorizaon  for  this  model device with  all reported SAR levels evaluated as  in compliance with the  FCC  RF  exposure  guidelines.  SAR  informaon  on  this  model device is  on le with the  FCC and  can be found under the Display Grant  secon  of  HYPERLINK  “hp://www.fcc.gov/oet/ea/fccid” www.fcc.gov/oet/ea/fccid aer searching on FCC ID: 2ACCJB072.For this device, the  highest  reported SAR value  for usage  near  the body is:Maximum SAR for this model and condions under which it was recorded.Body-worn SAR GSM 1900 2.57 W/kg
17SAR compliance for body operaon is based on a separaon distance of 0 cm  between the device and the  human  body. During use, the actual  SAR values  for this device are usually well  below  the  values stated above. This is because, for purposes of system eciency and to minimize interference on the network, the operang power of your device is automacally decreased when full power is not needed. The lower the power output of the device, the lower its SAR value.Body-worn  SAR  tesng  has  been  carried  out  at  a  separaon distance of 0 cm. To meet RF exposure guidelines during body-worn operaon, the device should be posioned at least this distance away from the body.If  you  are  not  using  an  approved  accessory  ensure  that  whatever product is used is free of any metal and that it posions the device the indicated distance away from the body.Organizaons  such  as  the  World  Health  Organizaon  and  the  US Food  and  Drug  Administraon  have  suggested  that  if  people  are concerned and want to reduce their exposure they could use a hands-free accessory  to  keep  the  wireless device away from  the  head  or body during use, or reduce the amount of me spent on the device.For more informaon you can go to www.alcatel-mobile.com;Addional informaon about electromagnec elds and public health are available on the following site: hp://www.who.int/peh-emfThis device is equipped with a built-in antenna. For opmal operaon, you should avoid touching it or degrading it.LicensesThis equipment is in compliance with the essenal requirements and other relevant  provisions of Direcve  1999/5/EC. The  enre copy of  the  Declaraon  of  Conformity  for your  device  can  be  obtained through our Website: www.alcatel-mobile.comWarrantyThe  device  is  warranted  against  any  deviaon  from  technical specicaons  for  a  period  of  twelve  (12) (1)  months  from  the  date specied on your original invoice.(1)  The warranty period may vary depending on your country.
18Under the terms of this warranty, you must immediately inform your vendor in case of a conformity defect on  this device, and present a proof of purchase.The vendor or repair center will decide whether to replace or repair this device, as appropriate.Repaired or replaced this device is warranted ONE (1) month unless there are statutory provisions to the contrary.This  warranty  shall  not  apply  to  damage  or  defects  to  this  device due to:1)  Not following the instrucons for use or installaon,2)  Not  being  compliant  with  technical  and  safety  standards applicable in the geographical area where this device is used,3)  Improper maintenance of sources of energy, and of the overall electric installaon,4)  Accidents  or consequences  of the  of  the  vehicle  in  which  this device is  transported,  acts  of  vandalism,  lightning,  re,  humidity, inltraon of liquids, inclement weather,5)  Connecng to or integrang into this device any equipment not supplied or not recommended by the manufacturer,6)  Any  servicing,  modicaon  or repair  performed  by individuals not authorised by the manufacturer, the vendor or the approved maintenance centre,7)  Use  of  this  device  for  a  purpose  other  than  that  for which  it was designed,8)  Malfuncons caused by external causes (e.g., radio interference from other equipment, power voltage uctuaons),9)  Faulty  connecons  resulng  from  unsasfactory  radio transmission or caused by the absence of radio relay coverage.Warranty is also excluded for this device on which markings or serial numbers have been removed or altered.This device is also warranted against hidden defects (defects inherent in the design, manufacture, etc.).There  are  no  other  express  warranes  than  this  printed  limited warranty, expressed or implied, of any nature whatsoever.In  no  event  shall  the  manufacturer  be  liable  for  incidental  or consequenal  damages  of  any  nature  whatsoever,  including  but not limited to trading loss,  commercial loss, to the full extent  those damages  can  be  disclaimed  by  law.  Some  countries/states  do  not allow  the  exclusion  or  limitaon  of  incidental  or  consequenal damages, or limitaon of the  duraon of implied warranes, so  the preceding limitaons or exclusions may not apply to you.

Navigation menu