TCL Technoly Electronics 09 Wi-Fi & BT combo Module User Manual
TCL Technoly Electronics (Huizhou) Co., Ltd. Wi-Fi & BT combo Module
User Manual
Wi-Fi & BT com mbo Mod dule Data asheet Model N No.: TWM M-M7632 TON NNLY ELECTRR RONICS HOLD DINGS LIMMITTED. Address: Section 37, Zhongkai Hi-tech Devvelopment Zone, Huizhou Guangdong 5516006, P.R.C China Web bsite: http://w www.tonlyele e.com ©200115 TONLY ELECTRONICS HOLDINGS LLIMITED. All rights reserved 1 / 15 Legall Notice, Disclaim mer, Copy yright This data sheet contains infformation thhat is confidential to TO ONLY ELECTRO OCICS HOLDINGS LIMIITED. Unauthorized use or disclosu ure of the infformation co ontained here ein is prohibbited. You ma ay be held d responsible for any losss or damagess suffered byy TONLY ELEC CTROCICS HO OLDINGS LIMITED. For yyour unautho orized disclossure hereof, inn whole or in n part. Inforrmation hereein is subject to change wiithout noticed. TONLY ELE ECTROCICS HO OLDINGS LIM MITED. doess not assumee any responsibility for anyy use of, reliance on, the in nformation coontained herrein THISS DATA SHEETT AND ALL INFORMATION N CONTAINED HEREIN IS PROVIDED ““AS IS” WITH HOUT WAR RRANTY OF ANY KIND, WHETHER EXXPRESS, IMPLED, STATUT TORY, OR OTTHERWISE. TO ONLY ELEC CTROCICS HO OLDINGS LIM MITED. SPECCIFICALLY DISCLAIMS ALLL IMPLIED WARRANTIESS OF MER RCHANTABLILLITY, NON-INFFRINGEMENTT, AND FITNESS FOR A PARTICULAR PU URPOSE. NEIT THER DOEES TONLY ELEECTROCICS HOLDINGS LIM MITED. PROV VIDE ANY WA ARRANTY WH HATSOEVER WITH RESP PECT TO THE SOFTWARE OF ANY THIR RD PARTY WH HICH MAY BE E USED BY, IN NCORPORATED IN, OR SSUPPLIED WIITH THIS DAT TA SHEET AND D USER AGREEES TO LOOK K ONLY TO SU UCH THIRD PARTY FOR ANY WARR RANTY CLAIM M RELATING THERETO. TONLY ELECT TROCICS HOLLDINGS LIMITED. SHALL ALSO NO OT BE RESP PONSIBLE FO OR ANY TO ONLY ELECTR ROCICS HOLLDINGS LIMITED. DELIIBERABLES MADE TO USE ER’S SPECIFICCATION OR TO O CONFORM TO A PARTICCULAR STAND DARD OR O OPEN FORUM M. Tonly is a tradem mark of TONLY LY ELECTROCI CS HOLDINGS LIMITED. other names m mentioned in n this docu ument are traademarks/reggistered tradeemark of their respective owners. 2 / 15 Documen nt Revisio on Historry Revision Date Author V1.0 2015-12-31 Grant Woo Frist release V1.1 2016-04-18 zzhangjiang 1. A Additional module logo, leegal notice, ddisclaimer, ccopyright, ccertificate and rregulation i nformation, ppackage and oordering i nformation, ESD pprotection, Green ppolicy, rrecommende ed ttemperature rreflow profile 2. CConfirm RF ccharacteristicc V1.2 2016-07-26 zzhangjiang 1. U Update modu ule pphotos 2. U Update modu ule ssize 3. U Update modu ule RRF Characteristic 4. U Update certifficate aand regulation 3 / 15 Description Tablee of Conttents ● Legal Notice, Disclaime er, Copyrighht ● ● ● ● ● ● ● ● ● ● ● ● Document Reevision History Table of conttents System overvview Product Desccription Application Explanation Electrical Chaart RF Characterristic Certificate an nd Regulation n informationn Package and Ordering info ormation Green Policy Recommended Temperature Reflow P rofile ESD Protectio on 4 / 15 1. System Overview 1.1Generral Descrip ptions TWN-M7 7632 is a IEEE 802.11 a//b/g/n/ac 2TT2R Dual Band WLAN M Module Integrated Bluetootth 2.1/3.0/4.0 0 dual mode include BLE This doccument is to specify the prroduct speciffication for IEEE 802.11 a/bb/g/n/ac Module. It is baased on MT TK 7632U chhipset that complied with IEEE 8002.11 a/b/g/n/ac; The MT7 7632U is a higghly integrateed single chip p which has built b in a 2x2 ddual-band wiireles s LAN radio and Bluettooth radio. IIt supports IEEEE 802.11a/b b/g/n standarrd and provid des t he higheest PHY rate up u to 300Mbpps, offering fe eature-rich wireless conneectivity and reliable throughput from an extennded distance e. It includes Bluetooth ED DR and LE rad dio Which complies with Bluetooth v22.1+EDR, v3.0 0, and v4.0+B BLE? 1.2Featurres ● ● ● ● ● ● ● Bluettooth ® V2.1+ +EDR, V3.0, V V4.0+BLE Wi-Fi ® IEEE 802.1 11a/b/g/n/acc 2T2R dual band USB V2.0 interfacce Compact 18mm*23mm SMT ppackage TCL TONLY Firmware for Contrrolling Wakee on WLAN/B Bluetooth Driveers support Windows 1.3Block Diagram 2. Product Descripttion 2.1Pin De escription & Appearrance 5 / 15 2.2Physiccal Dimenssions Tolerances are a ±05 mm uunless otherw wise specified d (Unit: mm) 6 / 15 2.3Pin De escription PIN No. Symbol Descrip ption Remaark GND Ground GND WL_RF0 WLAN RF in/out 0 In/Ouut GND Ground GND GND Ground GND WL_RF1 WLAN RF in/out 1 In/Ouut GND Ground GND GND Ground GND BT_RF Bluetoo oth RF in/outt In/Ouut GND Ground GND 10 WL_USB B_DP USB D+ + signal In/Ouut 11 WL_USB B_DN USB D-- signal In/Ouut 12 VDD (+3.3V) Positive e Supply +3.3 3V Poweer 13 DEV_WA AKE Device Wake Port In 14 WL_HOSST_WAKE WLAN HOST wake port In 15 RESET System m Reset Activve low 16 NC Reserved N/A 3. Applicattion Explanationss ● Soundbar ● Wireless speaker ● DTV 4. Electricaal Characcteristics 4.1DC Ele ectrical Ch haracteristtics ELEC CTRICAL CHARACTERISTIC CS Supp ply Voltage DC 3.0 – 3.6V CUR RRENT CONSU UMPTION Powe er supply DC 3.3V TX/R RX active Max..: 300mA @ RX R Max.: 900 mA @ TX WEIGHT AND DIM MENSIONS Size 18mm * 23mm * 2.3mm (L x W x H) Weigght 1.5g 4.2Therm mal Characcteristics Storage Temperature : -40 ~ + 80℃ bient Operating Temperatu ure: 0 ~ 60℃ ℃ Amb Juncction Temperaature: 0 ~ 125 5℃ 7 / 15 5. RF Charaacteristicc Specification De escription Bluetooth seection-BR&ED DR Standard Blu uetooth 4.0 Frequency Baand 24 402 – 2480 MHz Channel Num mber 79 9 Channels Modulation Method GFFSK,π//4DQPS SK,8DPSK Maximum Daata Rate 1/2/3 Mbps RX Sensitivityy -86 6 dBm at 0.1% % BER GFSK ((1Mbps) -86 6 dBm at 0.1% % BERπ//4DQ QPSK (2Mbpss) -80 0 dBm at 0.1% % BER 8DPSKK (3Mbps) TX Power + 8dBm (Class 1) Bluetooth se ection - BLE Standard Blu uetooth 4.0 Frequency Baand 24 402 – 2480 MHz Channel Num mber 40 0 Channels Modulation Method GFFSK Maximum Daata Rate 1 Mbps RX Sensitivityy -86 6 dBm at 0.1% % BER GFSK ((1Mbps) TX Power + 0 dBm WLAN Sectio on 802.11n Standard IEEEE 802.11 n Modulation Type BP PSK, QPSK, 16 6QAM, 64QAM M with OFDM Operating Frequency Ran nge 2.4 4G band: 240 00 – 2483.5M MHz 5.0 0G band: 515 50 – 5825 MH Hz Data Rate 30 00 Mbps max.. Transmitter Output Po ower @ A Antenna Connector 25 5℃ (Tolerance ±2 2dB) 2.4 4G Band/HT2 20: +15.5 dBm m at MCS7 2.4 4G Band/HT4 40: +15.5 dBm m at MCS7 5.0 0G Band/HT2 20: +13.5 dBm m at MCS7 5.0 0G Band/HT4 40: +13.5 dBm m at MCS7 Receiver Sen nsitivity @ Antenna Conneector 2.4 4G Band HT20 -88 8dBm at MCS S0 -69dBm att MCS7 2.4 4G Band HT40 -85 5dBm at MCS S0 -68dBm att MCS7 5G G Band HT20 -87 7dBm at MCS S0 -66dBm att MCS7 5G G Band HT40 -84 4dBm at MCS S0 -63dBm att MCS7 WLAN Sectio on 802.11a Standard IEEEE 802.11 a Modulation Type BP PSK, QPSK, 16 6QAM, 64QAM M with OFDM Operating Frequency Ran nge 5.0 0G band: 515 50 – 5825 MH Hz 8 / 15 Channel Num mbers Acccording to Re egion compliaance request Date Rate 6,9 9,12,18,24,36 6,48,54 Mbpss Transmitter Output Po ower @ A Antenna Connector 25 5℃ (Tolerance ±2 2dB) +1 16 dBm at 6/9 9 Mbps +1 15 dBm at 12//18 Mbps +1 14 dBm at 24//36 Mbps +1 14 dBm at 48//54 Mbps Receiver Sen nsitivity @ Antenna Conneector 10 000PDU, PER< <10% @ Tempp 25℃ -87 7 dBm at 6 Mbps -69 9 dBm at 54 Mbps WLAN Sectio on 802.11b Standard IEEEE 802.11 b Modulation Type DQ QPSK, DBPSK,, DSSS, CCK Operating Frequency Ran nge 24 400 – 2497 MHz Channel Num mbers 11 1 channels forr USA and Cannada 13 3 channels forr Europe and China 14 4 channels forr Japan Date Rate 11 1, 5.5, 2, 1 Mb bps Transmitter Output Po ower @ A Antenna Connector 25 5℃ (Tolerance ±2 2dB) +1 17dBm Receiver Sen nsitivity @ Antenna Conneector 10 000PDU, PER< <10% @ Tempp 25℃ -92 2 dBm at 1 Mbps -82 2 dBm at 11 Mbps WLAN Sectio on 802.11a Standard IEEEE 802.11 ac Modulation Type BP PSK, QPSK, 16 6QAM, 64QAM M with OFDM Operating Frequency Ran nge 5.0 0G band: 515 50 – 5825 MH Hz Channel Num mbers Acccording to Re egion compliaance request Date Rate 58 8.6, 117, 175.6, 234, 351,, 468, 526.6, 585, 70 02, 780 Mbps Transmitter Output Po ower @ A Antenna Connector 25 5℃ (Tolerance ±2 2dB) +1 16dBm Receiver Sen nsitivity @ Antenna Conneector 10 000PDU, PER< <10% @ Tempp 25℃ -87 7 dBm at 58.6 6 Mbps -69 9 dBm at 780 0 Mbps 6. Certificaate & Reggulation 6.1BQB QDID: 8546 60 6.2FCC ID D: ZVA09 9 / 15 6.3ISED Certificatio on Numbeer: 9976A--09 7. Package & Orderring information ● 60 pcs per evvery Blister trray ● 600 pcs per every Vacuum m packing 8. Green Po olicy This module can meet ROHS & REACH com mpliance. 9. Recomm mended Tempera ture Reflow Proffile 10.. ESD Pro otection TWM M-M7632 is ESD E (electrosstatic dischargge) sensitive)) device and may be dam maged with ESSD or spikee voltage. Altthough TWM M-M7632 is w with built-in ESD protectio on circuit, pl ease handle with caree to avoid the permanent malfunction oor the performance degradation. 10 / 15 FCC C Statem ment This device comp plies with part 15 of the FCCC rules. Ope eration is subjject to the fo llowing two cond ition ns: (1) this device may not cause harmfful interference, and (2) th his device muust accept anyy int erference receivved, includin ng interferennce that may cause undesired operration. Chan nges or modifications not expressly appproved by the party respo onsible for coompliance cou uld v oid tthe user’s autthority to ope erate the equuipment. NOTTE: This equip pment has been tested andd found to co omply with th he limits for a Class B digital de vice,, pursuant to part 15 of th he FCC Rules. These limits are designed d to provide rreasonable prrotec tion against harm mful interference in a residdential installation. This eq quipment gennerates uses and can radiate radio frequency energy and, if not installed and used in accordance w with the instrructi ons, may cause harmful interfference to raddio communiications. How wever, there iss no guarante ee th at in nterference will w not occur in a particulaar installation n. If this equip pment does ccause harmfu ul int erference to radio or televisio on reception, which can be e determined d by turning t he equipmen nt off and d on, the userr is encourage ed to try to coorrect the intterference byy one or moree of the follow wing meaasures: ‐R Reorient or reelocate the receiving antennna. ‐R Reorient or reelocate the receiving antennna. ‐R Reorient or reelocate the receiving antennna. ‐Co onsult the deealer or an experienced ra dio/TV techn nician for help p important aannouncement Impo ortant Note: Rad diation Exxposure Sttatement This equipment complies with FCC rad iation expossure limits set forth for an uncontrrolled environment. Th his equipmen nt should be installed and d operated with w minimu m distance 20cm betw ween the radiator and you ur body. This transmitter must not be e co-located oor operating in conjunctio on with any other antenn na or transmitter. Coun ntry Code sellection featurre to be disabbled for products marketed to the US/CCanada. This device is inteended only fo or OEM integgrators under the following g conditions: 1. The antenna must be insttalled such thhat 20 cm is maintained be etween the aantenna and users, and 2. The transmittter module may m not be coo-located with any other transmitter orr antenna, 3. For all produ ucts market in n US, OEM haas to limit the e operation ch hannels in CH H1 to CH11 fo or 2.4G band byy supplied firmware progrramming tooll. OEM shall not n supply anny tool or info o to the end-userr regarding to o Regulatory D Domain chan nge. (if modular only test CChannel 1-11) As lo ong as the th hree conditio ons above aree met, furthe er transmitter testing willl not be requ uired. How wever, the OEEM integratorr is still respoonsible for te esting their end-product ffor any addittional com mpliance requirements required with thhis module installed. Imp portant Note: In th he event thatt these conditions cannott be met (forr example ce ertain laptop configurations or is no longerr considered valid co-lo ocation with another tran nsmitter), theen the FCC authorization 11 / 15 and the FCC ID cannot be use ed on the fin al product. In n these circumstances, thhe OEM integgrator will be responsib ble for re-evaluating the eend product (including the e transmitterr) and obtaining a sepaarate FCC autthorization. End d Product Labeling The final end pro oduct must be e labeled in a visible area with the follo owing" Contaains FCC ID: ZV VA09 ". Maanual Information to the End d User The OEM integrator has to be e aware not too provide information to the t end user regarding ho ow to instaall or removee this RF mod dule in the uuser’s manual of the end product whiich integratess this mod dule. The end user maanual shall in nclude all reqquired regulaatory informa ation/warnin g as show in n this man nual. Anttenna info ormation The TWM-M7632 has been designed to pass certificcation with the antenna listed below.. The requ uired antennaa impedance is 50 ohms. Peak gain g ( dBi ) Mod del Tyype Conne ector 2400--2483.5 MHz 515 50-5250 MHz 5250-5350 MHz 54470-5725 MHz 5725-5850 MHz BAT-PO OLK-BT Dipole RF-SM MA 3.00dBi BAT-POLLK-WIFI Dipole RF-SM MA 3.00dBi 3.0dBi 3.0dBi 3.0dBi 3.0dBi BAT-POLLK-WIFI Dipole RF-SM MA 3.00dBi 3.0dBi 3.0dBi 3.0dBi 3.0dBi IC SStatement ‐ En nglish: This de evice compliees with Industtry Canada liccense‐exemppt RSS standard(s). 1) This device may not cauuse interferen nce, a Operation is subjject to the folllowing two cconditions: (1 nd (22) This devicee must accept any interferrence, includiing interferen nce that may cause undesired operration of the device. The digital apparaatus compliess with Canadian CAN ICES‐‐3 (B)/NMB‐3 3(B). ‐ French: Le préésentappareillestconformee aux CNR d'In ndustrie Cana ada applicablles aux apparreils o exempts dee licence. L'exxploitationesttautorisée au ux deux conditions suivanttes: (1) l'appa areil radio ne d doit pas produ uire de brouillage, et (2) l' utilisateur de e l'appareildo oit accepter toout brouillageradi oéleectriquesubi, mêmesi le brrouillageest s usceptible d'encomprome ettre le foncttionnement. This radio transm mitter (ISED certificationn number: 99 976A-09) hass been approoved by Industry Canaada to operate with the antenna typees listed with h the maximu um permissibble gain indicated. Anteenna types no ot included in n this list, havving a gain grreater than th he maximum gain indicate ed for that type, are strictly prohibited for use wiith this device e. Le p présent émettteur radio (ISED certificaation numberr: 9976A-09) a été approouvé par Indu ustrie Canaada pour fo onctionner avvec les typees d'antenne e énumérés ci-dessous eet ayant un gain adm missible maxim mal. Les types d'antenne nnon inclus daans cette liste e, et dont le ggain est supé érieur 12 / 15 au ggain maximal indiqué, sontt strictement interdits pou ur l'exploitation de l'émettteur. Antenna inform mation Peak gain g ( dBi ) Mod del Tyype Conne ector 2400--2483.5 MHz 515 50-5250 MHz 5250-5350 MHz 54470-5725 MHz 5725-5850 MHz BAT-PO OLK-BT Dipole RF-SM MA 3.00dBi BAT-POLLK-WIFI Dipole RF-SM MA 3.00dBi 3.0dBi 3.0dBi 3.0dBi 3.0dBi BAT-POLLK-WIFI Dipole RF-SM MA 3.00dBi 3.0dBi 3.0dBi 3.0dBi 3.0dBi Rad diation Exxposure Sttatement This equipment complies witth Canada raadiation expo osure limits set forth forr an uncontrrolled environment. Th his equipmen nt should be installed and d operated with w minimu m distance 20cm betw ween the radiator & your body. Décclaration d'expositi ion aux raadiations Cet ééquipement est conforme e Canada limiites d'exposittion aux radia ations dans uun environnement non contrôlé. Ceet équipemen nt doit être innstallé et utilisé à distancce minimum de 20cm enttre le radiaateur et votree corps. This device is inteended only fo or OEM integgrators under the following g condition: The transmitter module may not n be co-loccated with any other transsmitter or anttenna. As lo ong as the co ondition abovve is met, furtther transmittter test will not be requirred. However, the OEM M integrator is still responsible for te sting their end-product for f any addittional compliiance requ uirements req quired with th his module innstalled. Cet aappareil est conçu unique ement pour lees intégrateurs OEM dans les conditionns suivantes: Le m module émettteur peut ne pas être coïm mplanté avec un autre éme etteur ou anttenne. Tantt que les 1 co ondition ci-dessus sont reemplies, des essais suppllémentaires ssur l'émetteu ur ne sero ont pas nécesssaires. Toute efois, l'intégraateur OEM est toujours responsable ddes essais sur son prod duit final po our toutes exxigences de conformité supplémenta aires requis pour ce mo odule instaallé. Imp portant Note: In th he event thatt these conditions cannott be met (forr example ce ertain laptop configurations or co-lo ocation with another transmitter), thhen the Canaada authoriza ation is no loonger consid dered valid d and the IC cannot be used on the finnal product. In these circumstances, thhe OEM integgrator will be responsib ble for re-evaluating the eend product (including the e transmitterr) and obtaining a sepaarate Canada authorization. Notee Importante: Danss le cas où ù ces condittions ne peeuvent être satisfaites (par exemplee pour certa aines conffigurations d'ordinateur portable ou de certainess co-localisatiion avec un autre émettteur), l'auttorisation du Canada n'estt plus consid éré comme valide et l' IC ne peut pas être utilisé sur s le prod duit final. Dan ns ces circonstances, l'intégrateur OEM M sera chargé de réévalueer le produit final 13 / 15 (y co ompris l'émettteur) et l'obttention d'unee autorisation n distincte au Canada. End Product Labeeling The final end pro oduct must be e labeled in a visible area with the follo owing: Contaiins IC: 9976A A-09. Plaq que signalétiq que du produit final Le produit final doit d être étiqu ueté dans unn endroit visib ble avec l'insccription suivaante: Contient des IC: 99976A-09. Maanual Information to the End d User The OEM integrator has to be e aware not too provide information to the t end user regarding ho ow to instaall or removee this RF mod dule in the uuser’s manual of the end product whiich integratess this mod dule. The end user maanual shall in nclude all reqquired regulaatory informa ation/warnin g as show in n this man nual. Man nuel d'information à l'utilissateur final L'inttégrateur OEM M doit être co onscient de nne pas fournirr des informa ations à l'utilissateur final quant à la façon d'instaaller ou de supprimer ce module RF dans le manuel de l'utilissateur du pro oduit finall qui intègre ce c module. Le m manuel de l'u utilisateur fin nal doit incluure toutes les information ns réglementtaires requises et averrtissements comme indiqu ué dans ce maanuel. Cauttion: The deviice for operattion in the baand 5150–525 (i) 50 MHz is only for indoor use to reduce the potentiaal for harmful interferencee to co-channel mobile satellite systemss; (ii) (ii) For devices with detachable anntenna(s), the e maximum antenna gain permitted for devices in i the bands 5250-5350 M MHz and 5470 0-5725 MHz shall be such that the equipmeent still comp plies with the EIRP limit; (iii) (iii) For devices with detachable a ntenna(s), the maximum antenna gainn permitted fo or Hz shall be su devices in i the band 5725-5850 MH uch that the equipment sttill complies with the EIRP limits specified for point--to-point and non-point-to o-point operaation as appropriiate; and Operations in i the 5.25-5.35GHz band are restricte ed to indoor usage only. Aveertissement: (i) (ii) (iii) les dispo ositifs fonctionnant dans laa bande de 5150 à 5250M MHz sont réseervés uniquem ment pour unee utilisation à l'intérieur affin de réduire e les risques de d brouillagee préjudiciable aux systèèmes de satellites mobiless utilisant les mêmes cana aux; pour les dispositifs munis d'anten nes amovible es, le gain ma aximal d'antennne permis pour les dispo ositifs utilisan nt les bandes de 5250 à 53 350MHz et de e 5470 à 57255 MHz doit êttre conforme à la limite de d la p.i.r.e; pour les dispositifs munis d'anten nes amovible es, le gain ma aximal d'antennne permis (pour les dispo ositifs utilisan nt la bande dee 5725 à 5850 0 MHz) doit être ê conformee à la limite de d la 14 / 15 p.i.r.e. sp pécifiée pour l'exploitationn point à poin nt et l'exploittation non pooint à point, selon le cas; Les opératio ons dans la ba ande de 5.25--5.35GHz son nt limités à un n usage intériieur seuleme ent. 15 / 15
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes XMP Toolkit : 3.1-701 Producer : Acrobat Distiller 7.0 (Windows) Creator Tool : PScript5.dll Version 5.2 Modify Date : 2016:08:09 18:16:36+08:00 Create Date : 2016:08:09 18:16:36+08:00 Format : application/pdf Title : Microsoft Word - User Manual Creator : Administrator Document ID : uuid:304c9eed-efd6-4d33-8070-0470faef1874 Instance ID : uuid:5010fdff-fe42-4074-9faa-074da0a31d6b Page Count : 15 Author : AdministratorEXIF Metadata provided by EXIF.tools