TCL Technoly Electronics 10 WIFI+BT Audio Module User Manual
TCL Technoly Electronics (Huizhou) Co., Ltd. WIFI+BT Audio Module
User manual
WIFI+BT Audio Module Model No.型号:TWM-A8516+MT6630T 版本Version:V1.2 公布日期Release Date: 2017-11-28 TONLY ELECTRONICS HOLDINGS LIMITED.通力电子控股有限公司 Address:Section 37, Zhongkai Hi-tech Development Zone, Huizhou Guangdong 516006, P.R.China 地址:中国广东省惠州市仲恺高新区惠风6 路37 号小区网 址http://www.tonlyele.com ©2015 TONLY ELECTRONICS HOLDINGS LIMITED.All rights reserved 保留所有版权 法律声明 Legal Notice, Disclaimer, Copyright 本手册是通力电子控股有限公司机密,未经能力电子控股有限公司的事先书面许可,任何人不得复制、 传播本手册的内容。通力电子控股有限公司不对由于使用本手册或执行本手册内容带来的损害负责。 本手册所涉及的知识产权归通力电子控股有限公司所有(或经合作商授权许可使用),任何人不得侵 犯。 本手册是按当前状态提供参考,本公司司保留随时更新本手册的权利,恕不另行通知。本手册不对包括 但不限于下列事项担保:适销性、特殊用途的适应性;实施该用途不会侵犯第三方的知 识产权等权利。本文档在此未以禁止反言或其它方式授予任何知识产权使用许可,不管是明示许可还是暗 示许可。 本手册中提到的所有商标名称、商标和注册商标均属其各自所有者的财产,特此声明. 本协议以中、英文两种语言制作,两种语言文本冲突时,任何时候均以中文为准。 This data sheet contains information that is confidential to TONLY ELECTRONICS HOLDINGS LIMITED. Unauthorized use or disclosure of the information contained herein is prohibited. You may be held responsible for any loss or damages suffered by TONLY ELECTRONICS HOLDINGS LIMITED .for your unauthorized disclosure hereof, in whole or in part. Information herein is subject to change without noticed. TONLY ELECTRONICS HOLDINGS LIMITED does not assume any responsibility for any use of, or reliance on, the information contained herein THIS DATA SHEET AND ALL INFORMATION CONTAINED HEREIN IS PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE. TONLY ELECTRONICS HOLDINGS LIMITED. SPECIFICALLY DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANTABILITY, NON-INFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE. NEITHER DOES TONLY ELECTRONICS HOLDINGS LIMITED. PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR SUPPLIED WITH THIS DATA SHEET, AND USER AGREES TO LOOK ONLY TO SUCH THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. TONLY ELECTRONICS HOLDINGS LIMITED. SHALL ALSO NOT BE RESPONSIBLE FOR ANY TONLY ELECTRONICS HOLDINGS LIMITED DELIBERABLES MADE TO USER’S SPECIFICATION OR TO CONFORM TO A PARTICULAR STANDARD OR OPEN FORUM. Tonlyis a trademark of TONLY ELECTRONICS HOLDINGS LIMITED. other names mentioned in this document are trademarks/registered trademark of their respective owners. This data shall be executed in two languages including one Chinese and one English. Any conflict exist between the two languages, theChinese will prevail in any time. Smart Voice Assistant Device Module 版本变更说明 Document Revision History Revision Date Author Checked by Description 版本 日期 作者 审核 描述 V1.0 2017-10-18 Tommy.li JianliLiang V1.1 2017-12-26 Tommy.li JianliLiang Firstrelease. 1.GPIODefine;IOPowerDomain adding. ThesemodifyarelimitedtoA,D versionPCB. V1.2 2018-01-10 Tommy.li JianliLiang 1.USBDM1,DP1,LCMRST,DSITE Delete; 2.AD1,AD2,AD3,Micbias Portadding; These modify are limited to D versionPCB. V1.3 2018-03-29 Tommy.li JianliLiang 1. ModulePin46function modify:GPI0117GPIO73 2. Pin26,43,42,44Redefinepin name. TONLY ELECTRONICS HOLDINGS LIMITED Confidential 目录 Table of Contents 法律声明 Legal Notice, Disclaimer, Copyright 文档变更说明 Document Revision History 目录 Table of contents 1.系统概览System overview 1.1 通用说明 General Descriptions 1.2 性能特点Features 1.3 系统方框图Block Diagram 2.产品描述Production Description 引脚与功能说明Pin Layout & Pin Description 外观与尺寸 Appearance& Dimension 3.应用说明Application Explanation 4.电气特性Electrical Characteristics 工作条件 直流特性DC characteristics 热特性Thermal characteristics 电流消耗Current consumption 5.射频性能RF Performance 6.认证与法规信息Certificate& Regulation 7.包装与订货说明 Package& Ordering information 8.环保声明Green Policy 9 推荐过炉温度 RECOMMENDED TEMPERATURE REFLOW PROFILE 10.抗静电保护ESDProtection 1. 系统概览 System overview 通用说明 General Descriptions WIFI+BT Audio Mod , The highly integrated module makes the possibilities of web browsing, VoIP, Bluetooth applications. With seamless roaming capabilities and advanced security, also could interact with different vendors’ 802.11a/b/g/n Access Points in the wireless LAN. This compact module is a total solution for a combination of WiFi and Bluetooth V4.1technologies. 性能特点 Features Supports 20/40 Mhz at 2.4GHZ and 5GHz Supports Bluetooth V4.1+HS, BLE and be backwards compatible with Bluetooth 2.1+ enhance data rate. Supports WLAN-Bluetooth coexistence and ISM-LTE coexistence. Supports Bluetooth for class1 and class2 power level transmissions without requiring an external PA. Audio Interfaces: I2S support microphone inputs ( PDM digital microphone) Serial Interfaces: UART, SPI,I2C,USB Integrated PMU supports multiple low energy States Dimension: 56mm (L) × 41mm (W) ×2.54mm (H) 5 TONLY ELECTRONICS HOLDINGS LIMITED Confidential 系统方框图 Module Block Diagram 2.产品描述 Production Description 引脚与功能说明 Apperance & Pin Description& Physical Dimensions Description & Apperance : Smart Voice Assistant Device Module Physical Dimensions 7 TONLY ELECTRONICS HOLDINGS LIMITED Confidential Pin header information Pin descriptions PIN Symbol Description Function PWR3V8 Power input VCC input, typical voltage range :3.6V ~ 4.2V PWR3V8 Power input VCC input, typical voltage range :3.6V ~ 4.2V GND ground Ground GND ground Ground DSP_3V3 Power output 3.3V power supply GPIO24 Bi-directional with 3.3V Power domain NO. 9 GPIO24 Func_DPI_20; Func_DPI_DE TONLY ELECTRONICS HOLDINGS LIMITED Confidential 10 11 TC_3V3 GPIO25 I2C_SCL3 Power output Bi-directional with 3.3V Power domain Bi-directional with 1.8V Power domain Func_ANT_SEL1; Func_UCTS2; Func_PWM_A; Func_I2S_MCK; Func_DBG_Mon-A-O 3.3V power supply FUNC_GPIO25. Func_I2S_8CH_MCK; Func_ I2S_MCK; Func_DBG_Mon -A-1; Func_PWM_B; Func_URTS2; Func_ANT_SEL0; Func_DPI_VSYNC;Func_DPI_D19 Func_I2C SCL2_0; GPIO61. Func_PWM_C FUNC_GPIO7; Func_SQI RST; Func_DPI_D6; Func_SDA1_0; Func_EXT_RXDV; Func_CONN_MCU_TMS; FUNC_CON_MCU_AICE_JMSC; FUNC_DBG_MON_A_13 GPIO7 Bi-directional with 3.3V Power domain I2C_SDA3 Bi-directional with 1.8V Power domain FUNC_SDA2_0 GPIO60 FUNC_PWM_B FUNC_GPIO12; FUNC_CLKM5;FUNC_PWM_A; FUNC_SPDIF_OUT; FUNC_ANT_SEL4; FUNC_DPI_D11; FUNC_EXT_TXEN;FUNC_DBG_M ON_A_18. 12 GPIO12 Bi-directional with 3.3V Power domain 13 1.8V OUT Power output 1.8V power supply GPIO0 Bi-directional with 3.3V Power domain 14 FUNC_GPIO 0 FUNC_PWM_B; FUNC_DPI_CK; 15 GND ground FUNC_I2S2_BCK; FUNC_EXT_TXD0; FUNC_SQICS; FUNC_DBG_MON_A_6 Ground FUNC_GPIO10 FUNC_CLKM5 FUNC_SCL2_0 FUNC_EXT_FRAME_SYNC FUNC_EXT_RXD2 FUNC_ANT_SEL2 FUNC_DPI_D9 FUNC_DBG_MON_A_16 16 GPIO10 Bi-directional with 3.3V Power domain 17 VBUS Power input USB +5V input 18 SPI0_CS Bi-directional with 3.3V Power domain 19 AGND ground Ground 20 21 SPI0_MISO DM0 Bi-directional with 3.3V Power domain Bi-directional FUNC_SPI_CSB FUNC_GPIO5 FUNC_UCTS2 FUNC_DPI_D16 FUNC_EXT_RXER FUNC_CONN_MCU_TDI FUNC_CONN_TEST_CK FUNC_DBG_MON_A_11 FUNC_GPIO 3; FUNC_CLKM1; FUNC_DPI_D14; FUNC_SPI_MI; FUNC_EXT_TXD3; FUNC_CONN_MCU_DBGI_N; FUNC_SQIWP; FUNC_DBG_MON_A_9 USB data minus. FUNC_URXD2; FUNC_GPIO 34 FUNC_DPI_D5 FUNC_UTXD2 URXD2__FUNC_DBG_SCL FUNC_I2S2_MCK FUNC_DBG_MON_B_0 22 URXD2 Bi-directional with 3.3V Power domain 23 DP0 Bi-directional USB data plus 24 UTXD2 Bi-directional with 3.3V Power domain 11 FUNC_UTXD2; FUNC_GPIO 35; TONLY ELECTRONICS HOLDINGS LIMITED Confidential 25 AD1 Bi-directional 26 I2S_DO Bi-directional with 3.3V Power domain 27 AD2 Bi-directional FUNC_DPI_HSYNC; FUNC_URXD2; FUNC_DBG_SDA; FUNC_DPI_D18; FUNC_I2S3_MCK; FUNC_DBG_MON_B_1。 Aux adc external input channel2 FUNC_ GPIO 38; FUNC_MRG_DI FUNC_DPI_D1 FUNC_I2S0_DI FUNC_I2S3_DO FUNC_PCM0_DI FUNC_EXT_MDIO FUNC_DBG_MON_A_4 Aux adc external input channel3 power level full scale is 1.45V. power level full scale is 1.45V. 28 MRG_CLK Bi-directional with 3.3V Power domain 29 GND ground Ground Bi-directional with 3.3V Power domain FUNC_MRG_SYNC; FUNC_GPIO37; FUNC_DPI_D3; FUNC_I2S0_LRCK FUNC_I2S3_LRCK FUNC_PCM0_SYNC FUNC_EXT_COL FUNC_DBG_MON_A_3 GPIO13 Bi-directional with 3.3V Power domain FUNC_GPIO13 FUNC_TSF_IN; FUNC_ANT_SEL5; FUNC_DPI_D0; FUNC_SPDIF_IN; FUNC_DBG_MON_A_19. MRG_DO Bi-directional with 3.3V Power domain FUNC_MRG_DO FUNC_GPIO39 FUNC_DPI_D2 30 31 32 MRG_SYNC FUNC_MRG_CLK FUNC_GPIO36 FUNC_DPI_D4 FUNC_I2S0_BCK FUNC_I2S3_BCK FUNC_PCM0_CLK FUNC_IR FUNC_DBG_MON_A_2 33 34 35 36 37 38 GPIO2 GPIO8 GPIO11 GPIO1 SPI0_CLK GPIO72 13 Bi-directional with 3.3V Power domain Bi-directional with 3.3V Power domain FUNC_I2S0_MCK FUNC_I2S3_MCK FUNC_PCM0_DO FUNC_EXT_MDC FUNC_DBG_MON_A_5 FUNC_GPIO2 FUNC_CLKM0; FUNC_DPI_D13; FUNC_I2S2_LRCK; FUNC_EXT_TXD2 FUNC_CONN_MCU_DBGACK_N; FUNC_SQISI; FUNC_DBG_MON_A_8 FUNC_GPIO8; FUNC_SQICK; FUNC_CLKM3; FUNC_SCL1_0; FUNC_EXT_RXD0; FUNC_ANT_SEL0; FUNC_DPI_D7; FUNC_DBG_MON_A_14. FUNC_ GPIO11; FUNC_PWM_C; FUNC_ANT_SEL3; FUNC_CLKM4. FUNC_GPIO1 ; FUNC_PWM_C; FUNC_DPI_D12; FUNC_I2S2_DI; FUNC_EXT_TXD1; FUNC_CONN_MCU_TDO; FUNC_SQISO; FUNC_DBG_MON_A_7 FUNC_SPI0-CLK; FUNC_GPIO6. FUNC_DBG_MON_A_12 FUNC_GPIO72; FUNC_MSDC2_DAT2; FUNC_I2S_8CH_LRCK; FUNC_DPI_D23; FUNC_PWM_C; Bi-directional with 3.3V Power domain Bi-directional with 3.3V Power domain Bi-directional with 3.3V Power domain Bi-directional wit h 3.3V Power domain TONLY ELECTRONICS HOLDINGS LIMITED Confidential 39 40 41 42 43 44 SPI0_MOSI I2S_DI GPIO9 I2S_LRCK I2S_BCLK I2S_MCLK FUNC_DBG_MON_B_19 FUNC_SP0_MOSI; FUNC_GPIO4. FUNC_I2S3_DO; FUNC_GPIO70; FUNC_MSDC2_DAT0; FUNC_I2S_8CH_DO2; FUNC_DPI_D22; FUNC_UTXD0; FUNC_DBG_MON_B_17 Bi-directional with 3.3V Power domain FUNC_GPIO9 FUNC_CLKM4; FUNC_SDA2_0; FUNC_EXT_FRAME_SYNC; FUNC_EXT_RXD1; FUNC_ANT_SEL1; FUNC_DPI_D8; FUNC_DBG_MON_A_15. Bi-directional with 3.3V Power domain FUNC_I2S3_LRCK; FUNC_GPIO69; FUNC_MSDC2_CLK; FUNC_I2S_8CH_DO3; FUNC_SCL1_0; FUNC_DPI_D21; FUNC_USB_SCL; FUNC_I2S3_LRCK; FUNC_DBG_MON_B_16 Bi-directional with 3.3V Power domain FUNC_I2S3_BCK; FUNC_GPIO68; FUNC_MSDC2_CMD; FUNC_I2S_8CH_DO4; FUNC_SDA1_0; FUNC_USB_SDA; FUNC_I2S3_BCK; FUNC_DBG_MON_B_15. Bi-directional with 3.3V Power domain FUNC_I2S3_MCK; FUNC_GPIO71; FUNC_MSDC2_DAT1; FUNC_I2S_8CH_DO1; FUNC_PWM_A; FUNC_I2S3_MCK; FUNC_URXD0; FUNC_PWM_B; FUNC_DBG_MON_B_18. Bi-directional with 3.3V Power domain Bi-directional wit h 3.3V Power domain 45 46 47 GPIO50 Bi-directional with 1.8V Power domain GPIO73 Bi-directional with 3.3V Power domain GPIO51 Bi-directional with 1.8V Power domain FUNC_SPI_MISO FUNC_GPIO50 FUNC_I2S_8CH_BCK FUNC_GPIO73 FUNC_PWM_A FUNC_SPI_MOSI FUNC_GPIO51 FUNC_GPIO49 For USB_OTG_PWR_EN FUNC_SPI_CK USB_OTG_P WR_EN Bi-directional with 1.8V Power domain 49 GND ground Ground 50 I2C_SDA0 Bi-directional with 1.8V Power domain FUNC_SDA0_0; FUNC_GPIO58. 51 I2C_SCL0 Bi-directional with 1.8V Power domain I2C SCL0; FUNC_GPIO59. 52 MICBIAS0 Power output Microphone bias A 48 53 54 55 I2S_BCK0 I2S_DATA0_ IN I2C_SDA1 FUNC_I2S0_BCK; FUNC_GPIO57; FUNC_URTS0; FUNC_I2S3_BCK; FUNC_I2S_8CH_BCK; FUNC_PWM_C; FUNC_I2S2_LRCK; FUNC_DBG_MON_A_30 FUNC_I2S3_DO; FUNC_GPIO55; FUNC_I2S0_DI; FUNC_UCTS0; FUNC_I2S_8CH_DO1; FUNC_PWM_A; FUNC_I2S2_BCK; FUNC_DBG_MON_A_28. Bi-directional with 1.8V Power domain FUNC_SDA1_0; FUNC_GPIO52. FUNC_I2S0_LRCK; FUNC_GPIO56; FUNC_I2S3_LRCK; FUNC_I2S_8CH_LRCK; FUNC_PWM_B; FUNC_I2S2_DI; FUNC_DBG_MON_A_29 Bi-directional with 1.8V Power domain Bi-directional with 1.8V Power domain 56 I2S_LRCK0 Bi-directional with 1.8V Power domain 57 GND ground Ground 58 I2C_SCL1 Bi-directional with 1.8V Power domain 15 FUNC_SCL1_0; FUNC_GPIO53 TONLY ELECTRONICS HOLDINGS LIMITED Confidential 59 GPIO66 Bi-directional with 1.8V Power domain 60 AD3 Bi-directional 61 62 URXD0 Bi-directional with 1.8V Power domain UTXD0 Bi-directional with 1.8V Power domain 63 USB_ID Bi-directional with 1.8V Power domain 64 POWER_ON PWR 65 KPROW0 FUNC_I2S0_MCK Aux adc external input channel3 power level full scale is 1.45V. FUNC_GPIO62; FUNC_URXD0; FUNC_UTXD0. FUNC_GPIO63; FUNC_UTXD0; FUNC_URXD0 FUNC_GPIO41 FUNC_KPROW1; FUNC_IDDIG; FUNC_EXT_FRAME_SYNC; FUNC_MFG_TEST_CK; FUNC_DBG_MON_B_5. Power Key, active low. Bi-directional with 1.8V Power domain FUNC_KPROW0; FUNC_GPIO40; FUNC_IMG_TEST_CK; FUNC_DBG_MON_B_4. FUNC_GPIO43; FUNC_KPCOL1; FUNC_USB_DRVVBUS; FUNC_EXT_FRAME_SYNC; FUNC_TSF_IN; FUNC_DFD_NTRST_XI; FUNC_UDI_NTRST_XI; FUNC_DBG_MON_B_7; 66 GPIO43 Bi-directional with 1.8V Power domain 67 MC2_DA_1 PDM digital microphone Digital microphone Data2 68 MC_CK_1 PDM digital microphone Digital microphone Clk 69 I2S_MCLK_ TDM Bi-directional with 1.8V Power domain 70 MC1_DA_1 PDM digital microphone Digital microphone Data1 FUNC_TDM_RX_MCK; FUNC_GPIO100; FUNC_CMDAT0; FUNC_CMCSD0; FUNC_ANT_SEL2; FUNC_TDM_RX_MCK; FUNC_DBG_MON_B_21 Remark:Boldness is the default function by Tonly’s software. 3.应用说明 Application Explanations All portable Smart devices 3.1 Application Block Diagram 4. 电气特性 Electrical Characteristics Base Characteristics ELECTRICAL CHARACTERISTICS Supply Voltage 3.8V DC (Absolute Maximum Ratings 4.2V) Working current RMS 300mA Sleep current 33mA WEIGHT AND DIMENSIONS (unit : mm) Size (L x W x H) 56mm (L) × 41mm (W) ×1.6mm (H) Weight ~8.5g Recommended operating conditions Recommended operating conditions Min Max Unit Operatingtemperature -10 60 °C PWR3V8 3.6 4.2 V 5.射频性能 RF Performance 17 TONLY ELECTRONICS HOLDINGS LIMITED Confidential 2.4G BT BR Parameter Description Typ. Unit Output power At max power output level dBm 5.5±4 ICFT Initial carrier frequency drift ±18 kHz <±75 Carrier frequency drift One slot packet (DH1) ±10 kHz <±25 Three slot packet (DH3) ±10 kHz <±40 Five slot packet (DH5) ±10 kHz <±40 Max. drift rate 10 kHz/50u <20 BER < 0.1% -90 dBm Parameter Description Typ. Unit Output power π/4 DQPSK dBm 2.5±4 8PSK dBm 2.5±4 ω0, π/4 DQPSK ±4 kHz <±10 ω0, 8PSK ±4 kHz <±10 ωi, π/4 DQPSK ±18 kHz <±75 ωi, 8PSK ±18 kHz <±75 |ω0+ωi|, π/4 DQPSK ±20 kHz <±75 |ω0+ωi|, 8PSK ±20 kHz <±75 Receiver sensitivity EDR Frequency stability 18 TONLY ELECTRONICS HOLDINGS LIMITED Confidential Modulation accuracy RMS DEVM, π/4 DQPSK <20 RMS DEVM, 8PSK <13 Peak DEVM, π/4 DQPSK 15 <35 Peak DEVM, 8PSK 15 <25 π/4 DQPSK (BER < 0.01%) -90 dBm 8PSK (BER < 0.01%) -89 dBm Parameter Description Typ. Unit Output power(*) At max. power output level 5.5 dBm 5.5±4 Carrier frequency offset and drift Frequency offset ±10 kHz <±150 Frequency drift ±10 kHz <±50 Max. drift rate ±10 kHz/us <±20 Parameter Description Typ. Unit Receiver sensitivity (*) PER < 30.8% -90 dBm Receiver sensitivity LE 6.认证与法规信息Certification& Regulation The Certification: FCC&ICID、RED、SRRC、MICPretestOK. 7.包装与订货说明 Package & Ordering Assembly Information Information Smart Voice Assistant Device Module 8.环保声明 Green Policy This module can meet ROHS&REACH compliance. 9.推荐过炉温度 RECOMMENDED TEMPERATURE REFLOW PROFILE NC 10.抗静电保护 ESD Protection TWM-A8516-MT6330TisESD(electrostaticdischarge)sensitivedeviceandmaybe 20 TONLY ELECTRONICS HOLDINGS LIMITED Confidential damagedwithESDorspikevoltage.AlthoughTWM-A8516-MT6330Tiswith built-inESDprotectioncircuits,pleasehandlewithcaretoavoidthepermanent malfunctionortheperformancedegradation. FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: this equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ● Reorient of relocate the receiving antenna. ● Increase the separation between the equipment and receiver. ● Connect the equipment into an outlet on a circuit difference from that to which the receiver is connected. ● Consult the dealer or an experienced radio/TV technician for help. Important Note: Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Country Code selection feature to be disabled for products marketed to the US/Canada. 1. The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2. The transmitter module may not be co-located with any other transmitter or antenna. As long as the three conditions above are met, further transmitter testing will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed. Important Note: In the event that these conditions cannot be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID cannot be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. End Product Labeling: The final end product must be labeled in a visible area with the following “Contains FCC ID: ZVA10” Manual Information to the End User: The OEM integrator has to be aware not provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. The TMW-A8516+MT6630Thas been designed to pass certification with the antenna listed below. The required antenna impedance is 50 ohms. Antenna information Model Type Connector 2400‐2483.5 MHz N/A PIFA RF‐SMA 3.0dBi Peak gain ( dBi ) 5150‐5250 5250‐5350 5470‐5725 MHz MHz MHz 6.39 6.39 6.39 5725‐5850 MHz 6.39 ISED Statement – English: This device complies with Industry Canada licenseexempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. The digital apparatus complies with Canadian CAN ICES3 (B)/ NMB3 (B). – French: Le présentappareilestconforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitationestautorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareildoit accepter tout brouillageradioélectriquesubi, mêmesi le brouillageest susceptible d'encompromettre le fonctionnement. This radio transmitter (ISED certification number: 9976A-10) has been approved by Industry Canada to operate with the maximum permissible gain indicated. Strictly prohibited for use with thisdevice with maximum antenna gain. Le présentémetteur radio (ISED certification number: 9976A-10) a étéapprouvée par industriecanada pour fonctionner avec le gain maximal indiqué.strictementinterdite pour utilisation avec cedispositif avec le maximum de gain d'antenne. Antenna information The TMW-A8516+MT6630T has been designed to pass certification with the antenna listed below. The required antenna impedance is 50 ohms. Model Type Connector 2400‐2483.5 MHz N/A PIFA RF‐SMA 3.0dBi Peak gain ( dBi ) 5150‐5250 5250‐5350 5470‐5725 MHz MHz MHz 6.39 6.39 5725‐5850 MHz 6.39 6.39 Radiation Exposure Statement This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. Déclarationd'exposition aux radiations Cetéquipementestconforme Canada limitesd'exposition aux radiations dans un environnement non contrôlé. Cetéquipementdoitêtreinstallé et utilisé à distance minimum de 20cm entre le radiateur et votre corps. This device is intended only for OEM integrators under the following condition: The transmitter module may not be co-located with any other transmitter or antenna. As long as the condition above is met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed. Cetappareilestconçuuniquement pour les intégrateurs OEM dans les conditions suivantes: Le module émetteurpeut ne pas êtrecoïmplanté avec unautreémetteurouantenne. Tant que les 1 condition ci-dessussontremplies, des essaissupplémentaires sur l'émetteur ne seront pas nécessaires. Toutefois, l'intégrateur OEM esttoujoursresponsable des essais sur son produit final pour toutesexigences de conformitésupplémentairesrequis pour ce module installé. Important Note: In the event that these conditions cannot be met (for example certain laptop configurations or co-location with another transmitter), then the Canada authorization is no longer considered valid and the IC cannot be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate Canada authorization. Note Importante: Dans le casoùces conditions ne peuventêtresatisfaites (par exemple pour certaines configurations d'ordinateur portable ou de certaines co-localisation avec un autreémetteur), l'autorisation du Canada n'est plus considérécommevalide et l' IC ne peut pas êtreutilisé sur le produit final. Danscescirconstances, l'intégrateur OEM sera chargé de réévaluer le produit final (y comprisl'émetteur) etl'obtentiond'uneautorisationdistincte au Canada. End Product Labeling The final end product must be labeled in a visible area with the following: Contains IC:9976A-10. Plaque signalétique du produit final Le produit final doitêtreétiquetédansunendroit visible avec l'inscriptionsuivante: Contient des IC:9976A-10. Manual Information to the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. Manuel d'information à l'utilisateur final Caution: (i) The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co‐channel mobile satellite systems; (ii) For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the bands 5250‐5350 MHz and 5470‐5725 MHz shall be such that the equipment still complies with the EIRP limit; (iii) For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band 5725‐5850 MHz shall be such that the equipment still complies with the EIRP limits specified for point‐to‐point and non‐point‐to‐point operation as appropriate; and operations in the 5.25‐5.35GHz band are restricted to indoor usage only. Avertissement: (i) les dispositifsfonctionnantdans la bande de 5150 à 5250MHz sontréservésuniquement pour uneutilisation à l'intérieurafin de réduire les risques de brouillagepréjudiciable aux systèmes de satellites mobiles utilisant les mêmescanaux; (ii) pour les dispositifsmunisd'antennesamovibles, le gain maximal d'antennepermis pour les dispositifsutilisant les bandes de 5250 à 5350MHz et de 5470 à 5725 MHz doitêtreconforme à la limite de la p.i.r.e; (iii) pour les dispositifsmunisd'antennesamovibles, le gain maximal d'antennepermis (pour les dispositifsutilisant la bande de 5725 à 5850 MHz) doitêtreconforme à la limite de la p.i.r.e. spécifiée pour l'exploitation point à point et l'exploitation non point à point, selon le cas;Les opérationsdans la bande de 5.25‐5.35GHz sontlimités à un usage intérieurseulement. -------------------------END--------------------------
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Author : User Create Date : 2018:05:22 10:31:56+08:00 Modify Date : 2018:05:22 10:37:17+08:00 XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Producer : Acrobat Distiller 11.0 (Windows) Creator Tool : PScript5.dll Version 5.2.2 Metadata Date : 2018:05:22 10:37:17+08:00 Format : application/pdf Title : Microsoft Word - 1.twm-a8516+mt6630t datasheet _2018-5-7修改_ Creator : User Document ID : uuid:0acb6c44-a26a-4fdc-8f59-870cea454b56 Instance ID : uuid:e568b30e-8e0d-4e51-81b9-8845bca4bc66 Page Count : 24EXIF Metadata provided by EXIF.tools