TCL Technoly Electronics 12 Bluetooth Module User Manual TBM A2823 Bluetooth Module Datasheet
TCL Technoly Electronics (Huizhou) Co., Ltd. Bluetooth Module TBM A2823 Bluetooth Module Datasheet
User Manual
Module Datasheet al Bluetooth To nl co nf id en ti Model No.型号:TBM-A2823 版本 Version:V1.0 公布日期 Release Date: 2016-03-08 TONLY ELECTRONICS HOLDINGS LIMITED.通力电子控股有限公司 Address:Section 37, Zhongkai Hi-tech Development Zone, Huizhou Guangdong 516006, P.R.China 地址:中国广东省惠州市仲恺高新区惠风 6 路 37 号小区 网址 http://www.tonlyele.com ©2015 TONLY ELECTRONICS HOLDINGS LIMITED.All rights reserved 保留所有版权 法律声明 Legal Notice, Disclaimer, Copyright 本手册是通力电子控股有限公司机密,未经能力电子控股有限公司的事先书面许可,任何人不得复制、 传播本手册的内容。通力电子控股有限公司不对由于使用本手册或执行本手册内容带来的损害负责。 本手册所涉及的知识产权归通力电子控股有限公司所有(或经合作商授权许可使用),任何人不得侵 犯。 本手册是按当前状态提供参考,本公司司保留随时更新本手册的权利,恕不另行通知。 本手册不对包括但不限于下列事项担保:适销性、特殊用途的适应性;实施该用途不会侵犯第三方的知 识产权等权利。 本文档在此未以禁止反言或其它方式授予任何知识产权使用许可,不管是明示许可还是暗 示许可。 本手册中提到的所有商标名称、商标和注册商标均属其各自所有者的财产,特此声明. al 本协议以中、英文两种语言制作,两种语言文本冲突时,任何时候均以中文为准。 This data sheet contains information that is confidential to TONLY ELECTRONICS HOLDINGS ti LIMITED. Unauthorized use or disclosure of the information contained herein is prohibited. You may be held responsible for any loss or damages suffered by TONLY ELECTRONICS HOLDINGS LIMITED .for your en unauthorized disclosure hereof, in whole or in part. Information herein is subject to change without noticed. TONLY ELECTRONICS HOLDINGS LIMITED does id not assume any responsibility for any use of, or reliance on, the information contained herein nf THIS DATA SHEET AND ALL INFORMATION CONTAINED HEREIN IS PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE. TONLY co ELECTRONICS HOLDINGS LIMITED. SPECIFICALLY DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANTABILITY, NON-INFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE. NEITHER DOES TONLY ELECTRONICS HOLDINGS LIMITED. PROVIDE ANY WARRANTY WHATSOEVER To nl WITH RESPECT TO THE SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR SUPPLIED WITH THIS DATA SHEET, AND USER AGREES TO LOOK ONLY TO SUCH THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. TONLY ELECTRONICS HOLDINGS LIMITED. SHALL ALSO NOT BE RESPONSIBLE FOR ANY TONLY ELECTRONICS HOLDINGS LIMITED DELIBERABLES MADE TO USER’S SPECIFICATION OR TO CONFORM TO A PARTICULAR STANDARD OR OPEN FORUM. Tonlyis a trademark of TONLY ELECTRONICS HOLDINGS LIMITED. other names mentioned in this document are trademarks/registered trademark of their respective owners. This data shall be executed in two languages including one Chinese and one English. Any conflict exist between the two languages, theChinese will prevail in any time. TBM-A2823 Bluetooth Module Datasheet 版本变更说明 Document Revision History Revision Date Author Description 版本 日期 作者 描述 2017-02-08 Tommy.li First release. V1.1 2017-07-17 Tommy.li Operating temperature modify V1.2 2017-09-20 Tommy.li BT version modify To nl co nf id en ti al V1.0 TONLY ELECTRONICS HOLDINGS LIMITED Confidential 目录 Table of Contents 法律声明 Legal Notice, Disclaimer, Copyright 文档变更说明 Document Revision History 目录 Table of contents 1.系统概览 System overview 1.1 通用说明 General Descriptions 1.2 性能特点 Features ti 2.产品描述 Production Description en al 1.3 系统方框图 Block Diagram id 引脚与功能说明 Pin Layout & Pin Description nf 外观与尺寸 Appearance& Dimension 3.应用说明 Application Explanation 4.电气特性 Electrical Characteristics co To nl 工作条件 直流特性 DC characteristics 热特性 Thermal characteristics 电流消耗 Current consumption 5.射频性能 RF Performance 6.认证与法规信息 Certificate& Regulation 7.包装与订货说明 Package& Ordering information 8.环保声明 Green Policy 9 推荐过炉温度 RECOMMENDED TEMPERATURE REFLOW PROFILE 10.抗静电保护 ESD Protection TBM-A2823 Bluetooth Module Datasheet 1. 系统概览 System overview 1.1 通用说明 General Descriptions TBM-A2823 is a Bluetooth sub-system using ATS2823 chipset from ‘Actions’ . The ATS2823 consumer audio platform for wired and wireless applications integrates an ultra low power DSP and application processor , a high-performance stereo codec, a power management subsystem, LED drivers , Usb flash Disk and MMC in a SoC IC. 1.2 性能特点 Features al ti en id nf co 104 MHz MIPS32 Processor and 180 MHz DSP Internal ROM and serial flash memory interface supporting randomizer Internal RAM for data and program Built-in high performance stereo 24 bit DAC& ADC Supports Digital microphones, single-ended Analog microphones and full difference microphone Built-in stereo PA for headphone and differential audio output for speaker PA Bluetooth V4.2 compatible with Bluetooth V4.1, V3.0, V2.1 systems Bluetooth fast AGC control to improve receiving dynamic range Supports AFH to dynamically detect channel quality to improve Bluetooth transmission quality. Support SD/MMC/eMMC card interface and SPI Nor Flash interface Audio Interfaces: I2S, SPDIF TX Serial Interfaces: UART, SPI Infrared Remote controller supported Integrated PMU supports multiple low energy States Integrated Linear battery charger up to 600mA charging current PCB Dimension: 16.9mm (L) × 13.7mm (W) ×0.8mm (H) To nl 1.3 系统方框图Block Diagram TONLY ELECTRONICS HOLDINGS LIMITED Confidential al ti en id nf co 2.产品描述 Production Description 引脚与功能说明 Apperance & Pin Description& Physical Dimensions Description & Apperance: To nl ti al TBM-A2823 Bluetooth Module Datasheet en Physical Dimensions To nl co nf id Top VIEW TONLY ELECTRONICS HOLDINGS LIMITED Confidential al ti en id To nl co nf Bottom VIEW PCB Layerout recommend PIN Symbol Description To nl NO. co Pin descriptions nf id en ti al TBM-A2823 Bluetooth Module Datasheet 10 AGND MICINR MICINL VRO AOUTL AOUTR VRO_S AGND GND VCC Ground Analog input Analog input Analog output Analog output Analog output Analog input ground Power ground Power output 11 GPIOA21 Bi-directional 12 GPIOA23 Bi-directional 13 GPIOA22 Bi-directional Function Analog ground MIC right channel input MIC left channel input Virtual Ground for PA Left channel of PA Right channel of PA VRO Sense for PA Analog ground Ground 3.3V power supply General Purpose Input Output: A21/Uart_RX General Purpose Input Output: A23/SPDIF_TX,Uart_TX1 General Purpose Input Output: A22/IR_RX TONLY ELECTRONICS HOLDINGS LIMITED Confidential 14 GPIOA16 Bi-directional 15 SPI_MOSI Bi-directional 16 SPI_CLK Bi-directional 17 SPI_SS Bi-directional 18 GPIOB11 19 GND Bi-directional General Purpose Input Output: A16 General Purpose Input Output: A31/SPI_MOSI General Purpose Input Output: A29/ SPI_CLK General Purpose Input Output: A28 SPI_SS Bidirectional with weak Programmable pull-down 11./SPI_BTIO2 Power ground Ground This pin can be used when not using 20 BT_ANT a chip antenna or connector of the module. Power output 22 ON/OFF Input 23 BAT Power input 24 GND Power ground 25 DC5V Power input 26 29 GND GND AUX0R AUX0L Power ground Power ground Analog input Analog input 30 AVCC Power output 28 Power for RTC Module, typical voltage:1.2V Power on/off Battery input, typical voltage range :3.4V ~ 4.2V Ground USB power input, typical voltage range :4.5V ~ 7.0V Ground Ground AUX0 right channel input AUX0 left channel input Power for Analog module, typical voltage:2.95V en id nf co To nl 27 output /receiver inpu al RTCVDD 3.应用说明 Application Explanations Stereo headsets and headphones Portable stereo speakers and speakerphones Bluetooth car audio unit Bluetooth sound bar 4. 电气特性 Electrical Characteristics Base Characteristics ELECTRICAL CHARACTERISTICS Supply Voltage line Bluetooth 50Ω transmitter ti 21 I/O >= 3.6V DC TBM-A2823 Bluetooth Module Datasheet (Absolute Maximum Ratings 4.2V) Working current Depends on profiles, Max 24mA (A2DP) Standby current(disconnected) 0mA~5mA WEIGHT AND DIMENSIONS (unit : mm) Size (L x W x H) 24.9*14*1.5 mm Weight ~1.0g Recommended operating conditions Min Max Unit -10 70 °C VDD_BAT 2.8 4.2 VDD_CHG Terminal voltages al Operating temperature VD en ti co nf id Regulator Maximum output current To nl 电池充电 Battery charger Item Min Type Input Voltage 4.5 Charge Current(CC mode) 500 Max 600 mA Trickle Charge Current 10 mA Trickle Charge Threshold Voltage Regulated Output(Float)Voltage 4.2 Audio feature 11 Unit TONLY ELECTRONICS HOLDINGS LIMITED Confidential al ti en id 5.射频性能 RF Performance Specification RF performance nf Standard Modulation Method Maximum Data Rate co Frequency Band Description Bluetooth 4.2 2.402~ 2.48GHz GFSK;4/ΠDQPSK;8DQPSK 1 Mbps/2 Mbps/3 Mbps External antenna Interface UART, PIO, AIO, SPI,PCM,SPI Operation Range >=30 meters(Free Space) Sensitivity -90dBm at 0.1% BER RF TX Power <+10dBm To nl Antenna 6.认证与法规信息 Certification& Regulation The BQB Certification: nf id en ti al TBM-A2823 Bluetooth Module Datasheet To nl Assembly Information Information co 7.包装与订货说明 Package & Ordering 60Pcs per every Blister tray 600Pcs per every Vacuum packing 13 TONLY ELECTRONICS HOLDINGS LIMITED Confidential 8.环保声明 Green Policy This module can meet ROHS&REACH compliance. 9.推荐过炉温度 RECOMMENDED TEMPERATURE REFLOW PROFILE The soldering profile depends on various parameters necessitating a set up for each application. The data here is given only for guidance on solder re-flow. There are four zones: 1. Preheat Zone - This zone raises the temperature at a controlled rate, typically 1-2.5°C/s. 2. Equilibrium Zone - This zone brings the board to a uniform temperature and also activates the flux. The duration in this zone (typically 2-3 minutes) will need to be adjusted to optimize the out gassing of the flux. 3. Reflow Zone - The peak temperature should be high enough to achieve good wetting but not al so high as to cause component discoloration or damage. Excessive soldering time can lead to inter metallic growth which can result in a brittle joint. ti 4. Cooling Zone - The cooling rate should be fast, to keep the solder grains small which will give a To nl co nf id en longer lasting joint. Typical rates will be 2-5°C/s. Key features of the profile: ■ Initial ramp = 1-2.5°C/sec to 175°C ±25°C equilibrium ■ Equilibrium time = 60 to 180 seconds ■ Ramp to maximum temperature (245°C) = 3°C/sec max. ■ Time above liquidus temperature (217°C): 45-90 seconds ■ Device absolute maximum reflow temperature: 260°C TBM-A2823 Bluetooth Module Datasheet 10.抗静电保护 ESD Protection To nl co nf id en ti al -------------------------END-------------------------- 15 TONLY ELECTRONICS HOLDINGS LIMITED Confidential For IC: This device complies with RSS247 of Industry Canada. Cet appareil se conforme à RSS247 de Canada d'Industrie. This device complies with Industry Canada licenseexempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage prejudiciable, et (2) ce dispositif doit accepter tout brouillage recu, y compris un brouillage susceptible de provoquer un fonctionnement indesirable. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme a la norme NMB-003 du Canada. The device should be installed and operated with a minimum distance of 20cm between the radiator and your body. L'appareil doit être installé et utilisé avec une distance minimale de 20 cm entre le radiateu et votre corps. For FCC: Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. “The device must not be co-located or operating in conjunction with any other antenna or transmitter.” FCC RF Radiation Exposure Statement Caution: To maintain compliance with the FCC’s RF exposure guidelines, place the product at least 20cm from nearby persons. FCC Conditions This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1.This device may not cause harmful interference. 2.This device must accept any interference received, including interference that may cause undesired operation. This device is intended only for OEM integrators under the following conditions: 1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna. 3) For all products market in United States, OEM has to limit the operation channels in CH1 to CH11 for 2.4G band by supplied firmware programming tool. And OEM shall not supply any tool or info to the end-user regarding to change the domain selection. As long as 3 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed (for example, digital device emissions, PC peripheral requirements, etc.). IMPORTANT NOTE: In the event that these conditions cannot be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID cannot be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users (for example: Access point, Wireless Router, Notebook, etc.). The final end product must be labeled in a visible area with the following: “Contains FCC ID: ZVA12 ”. Antenna Type: PCB Antenna Antenna Gain : 2dBi
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Author : 吴云海 Create Date : 2017:09:29 08:55:25+08:00 Modify Date : 2017:09:29 08:56:54+08:00 Has XFA : No Language : zh-CN Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Format : application/pdf Creator : 吴云海 Title : TBM-A2823 Bluetooth Module Datasheet Creator Tool : Microsoft® Word 2010 Metadata Date : 2017:09:29 08:56:54+08:00 Producer : Microsoft® Word 2010 Document ID : uuid:a7183138-509a-4fa8-a6ba-33f427bc90f3 Instance ID : uuid:fa9e44ee-3a8d-44e8-83c7-591f3e2a6f08 Page Count : 17EXIF Metadata provided by EXIF.tools