TCL Technoly Electronics BDDMPBD87 BLU-RAY DISC PLAYER User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1611264
Application ID	tNXjIhAexTICMgVlurR5pg==
Document Description	DMP-BD87_User Manual_Part1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	215.04kB (2687964 bits)
Date Submitted	2011-12-28 00:00:00
Date Available	2011-12-28 00:00:00
Creation Date	2011-12-23 19:11:32
Producing Software	Acrobat Distiller 8.2.5 (Windows)
Document Lastmod	2011-12-23 19:11:36
Document Title	untitled

DMP-BD87_77_VQT3V18_eng.book 1 ページ
２０１１年１０月２４日
月曜日
午後２時４５分
Owner’s Manual
Blu-ray DiscTM Player
Model No. DMP-BD87
DMP-BD77
Dear customer
Thank you for purchasing this product.
For optimum performance and safety, please read these instructions carefully.
Please keep this manual for future reference.
If you have any questions contact
U.S.A. and Puerto Rico : 1-800-211-PANA(7262)
Canada : 1-800-561-5505
PC
VQT3V18
until
2012/01/5
DMP-BD87_77_VQT3V18_eng.book 2 ページ
２０１１年１０月２４日
月曜日
午後２時４５分
Getting started
IMPORTANT SAFETY
INSTRUCTIONS
Read these operating instructions carefully before using the unit.
Follow the safety instructions on the unit and the applicable safety
instructions listed below. Keep these operating instructions handy
for future reference.
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with dry cloth.
7 Do not block any ventilation openings. Install in accordance
with the manufacturer’s instructions.
8 Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9 Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with one
wider than the other. A grounding-type plug has two blades and
a third grounding prong. The wide blade or the third prong are
provided for your safety. If the provided plug does not fit into
your outlet, consult an electrician for replacement of the
obsolete outlet.
10 Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11 Only use attachments/accessories specified by the
manufacturer.
12 Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination to
avoid injury from tip-over.
13 Unplug this apparatus during lightning
storms or when unused for long periods of
time.
14 Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate
normally, or has been dropped.
THE FOLLOWING APPLIES ONLY IN THE U.S.A.
FCC Note:
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
≥ Reorient or relocate the receiving antenna.
≥ Increase the separation between the equipment and
receiver.
≥ Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
≥ Consult the dealer or an experienced radio/TV technician
for help.
FCC Caution: To assure continued compliance, follow the
attached installation instructions and use only shielded
interface cables when connecting to peripheral devices.
Any changes or modifications not expressly approved by the
party responsible for compliance could void the user’s
authority to operate this equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
Responsible Party:
Panasonic Corporation of North America
One Panasonic Way, Secaucus, NJ 07094
Support Contact:
Panasonic Consumer Electronics Company
Telephone No.: 1-800-211-PANA (7262)
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE SCREWS.
NO USER-SERVICEABLE PARTS
INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within
the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
VQT3V18
(Inside of product)
２０１１年１０月２４日
CAUTION
Unit
≥ This unit utilizes a laser. Use of controls or adjustments or
performance of procedures other than those specified herein may
result in hazardous radiation exposure.
≥ Do not place sources of naked flames, such as lighted candles, on
this unit.
Placement
To reduce the risk of fire, electric shock or product damage,
≥ Do not install or place this unit in a bookcase, built-in cabinet or in
another confined space. Ensure this unit is well ventilated.
≥ Do not obstruct this unit’s ventilation openings with newspapers,
tablecloths, curtains, and similar items.
≥ Do not place the unit on amplifiers/receivers or equipment that
may become hot. The heat can damage the unit.
Batteries
Mishandling of batteries can cause electrolyte leakage which can
damage items the fluid contacts and may cause a fire.
≥ Danger of explosion if battery is incorrectly replaced. Replace only
with the type recommended by the manufacturer.
≥ When disposing the batteries, please contact your local authorities
or dealer and ask for the correct method of disposal.
≥ Do not mix old and new batteries or different types at the same
time.
≥ Do not heat or expose to flame.
≥ Do not leave the battery(ies) in a car exposed to direct sunlight for
a long period of time with doors and windows closed.
≥ Do not take apart or short circuit.
≥ Do not attempt to recharge alkaline or manganese batteries.
≥ Do not use batteries if the covering has been peeled off.
Remove batteries if the remote control is not going to be used for a
long period of time. Store in a cool, dark place.
About descriptions in this
Owner’s Manual
≥ Instructions for operations are generally
described using the remote control.
≥ This Owner’s Manual is applicable to
models DMP-BD87 and DMP-BD77. Unless
otherwise indicated, illustrations in this
Owner’s Manual are of DMP-BD87.
[BD87] [BD77] : indicates features applicable
to DMP-BD87 and DMP-BD77, respectively.
Getting started
≥ Install this unit so that the power cord can be unplugged from the
socket outlet immediately if any problem occurs.
≥ Do not expose this unit to rain, moisture, dripping or splashing.
≥ Do not place objects filled with liquids, such as vases, on this unit.
≥ Use only the recommended accessories.
≥ Do not remove covers.
≥ Do not repair this unit by yourself. Refer servicing to qualified
service personnel.
Getting started
IMPORTANT SAFETY INSTRUCTIONS. . . . 2
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Unit and media care. . . . . . . . . . . . . . . . . . . . 4
Playable media . . . . . . . . . . . . . . . . . . . . . . . 5
Control reference guide . . . . . . . . . . . . . . . . . 7
Connections & Settings
Connections & Settings
To reduce the risk of fire, electric shock or product damage,
Table of contents
STEP 1 : Connecting to a TV. . . . . . . . . . . . . 8
STEP 2 : Connecting to an amplifier/
receiver. . . . . . . . . . . . . . . . . . . . . . 8
STEP 3 : Connecting to the network . . . . . . . 9
STEP 4 : Connecting to an AC power
source. . . . . . . . . . . . . . . . . . . . . . 10
STEP 5 : Settings . . . . . . . . . . . . . . . . . . . . 11
Playback
Inserting or removing media . . . . . . . . . . . . 14
HOME menu . . . . . . . . . . . . . . . . . . . . . . . . 14
Multi-user mode . . . . . . . . . . . . . . . . . . . . . . 15
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Enjoying Network Service
(Netflix, etc.) . . . . . . . . . . . . . . . . . . . . . . . 18
DLNA feature . . . . . . . . . . . . . . . . . . . . . . . . 19
VIERA LinkTM
“HDAVI ControlTM” . . . . . . . . . . . . . . . . . . . 20
Playback
Unit
午後２時４５分
Settings
Option menu . . . . . . . . . . . . . . . . . . . . . . . . 21
Setup menu . . . . . . . . . . . . . . . . . . . . . . . . . 23
Settings
WARNING
月曜日
Reference
Troubleshooting guide . . . . . . . . . . . . . . . . . 27
Messages . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Supplemental information . . . . . . . . . . . . . . 31
Precautions of Wireless LAN connection. . . 32
Specifications. . . . . . . . . . . . . . . . . . . . . . . . 33
Limited Warranty
(ONLY FOR U.S.A. AND PUERTO RICO) 37
Limited Warranty (Only for CANADA) . . . . . 38
Referencia rápida en español
(Spanish Quick Reference)
[Para EE.UU. y Canadá] . . . . . . . . . . . . . . 39
Index . . . . . . . . . . . . . . . . . . . . . . . Back cover
Reference
DMP-BD87_77_VQT3V18_eng.book 3 ページ
About Firmware updates (> 13)
VQT3V18
DMP-BD87_77_VQT3V18_eng.book 4 ページ
２０１１年１０月２４日
Accessories
月曜日
午後２時４５分
Unit and media care
Check the supplied accessories before using this
unit.
∫ Clean this unit with a soft, dry
cloth
≥ Never use alcohol, paint thinner or benzine to
clean this unit.
≥ Before using chemically treated cloth, carefully
read the instructions that came with the cloth.
Remote control
(N2QAYB000734)
Batteries for remote control
[For_Canada]
The enclosed Canadian French label sheet corresponds
to the English display on the front and back side of the
unit.
∫ This unit’s lens
≥ Use the lens cleaner (not supplied) to clean the
unit’s lens.
∫ Clean discs
≥ Product numbers provided in this Owner’s Manual correct
as of December 2011. These may be subject to change.
DO
DO NOT
∫ Using the remote control
Insert so the poles (i and j) match those in the
remote control.


R6/LR6, AA
(Alkaline or
manganese batteries)
Point it at remote control signal sensor on this
unit. (> 7)
Wipe with a damp cloth and then wipe dry.
∫ Disc and card handling
precautions
≥ Handle discs by the edges to avoid inadvertent
scratches or fingerprints on the disc.
≥ Do not attach labels or stickers to discs.
≥ Do not use record cleaning sprays, benzine,
thinner, static electricity prevention liquids or
any other solvent.
≥ Clean any dust, water, or foreign matter from
the terminals on the rear side of the card.
≥ Do not use the following discs:
– Discs with exposed adhesive from removed
stickers or labels (rented discs etc).
– Discs that are badly warped or cracked.
– Irregularly shaped discs, such as heart
shapes.
∫ To dispose or transfer this unit
The unit may keep the user settings information in
the unit. If you discard this unit either by disposal
or transfer, then follow the procedure to return all
the settings to the factory presets to delete the
user settings. (> 27, “To return all settings to the
factory preset.”)
≥ The operation history may be recorded in the
memory of this unit.
VQT3V18
DMP-BD87_77_VQT3V18_eng.book 5 ページ
２０１１年１０月２４日
月曜日
午後２時４５分
Playable media
Logo examples
BD
Type detail
BD-Video
Video
BD-RE
Video
JPEG
BD-R
Video
MKV
DVD-Video
Video
DVD-R
DVD
DVD-R DL
DVD-RW
—
CD
—
USB
—
Playable contents
Getting started
Type
Video
AVCHD
MKV
MP3
JPEG
WAV
FLAC
Video
AVCHD
+R/+RW/+R DL
Music CD
Music [CD-DA]
CD-R
CD-RW
MKV
Music [CD-DA]
MP3
JPEG
WAV
FLAC
USB devices
(up to 2 TB)
MKV
MP3
JPEG
MP4
MPEG
WAV
FLAC
* See page 6 and 33 for more information on the types of content that can be played.
VQT3V18
DMP-BD87_77_VQT3V18_eng.book 6 ページ
２０１１年１０月２４日
∫ Discs that cannot be played in
this unit
Any other disc that is not specifically
supported or previously described.
≥ DVD-RAM
≥ Super Audio CD
≥ Photo CD
≥ DVD-Audio
≥ Video CD and Super Video CD
≥ WMA discs
≥ All types of DivX discs
≥ PAL discs
≥ HD DVD
≥ BD-Video discs recorded at a rate of 50 fields/sec
∫ Region management information
BD-Video
This unit can play BD-Video discs supporting the
region code “A”.
Example:
DVD-Video
This unit can play DVD-Video discs supporting
the region number “1” or “ALL”.
Example:
ALL
∫ Finalize
DVD-R/RW/R DL, +R/+RW/+R DL and CD-R/RW
recorded by a recorder, etc. needs to be finalized
by the recorder to play on this unit. Please refer to
the recorder’s instructions.
∫ BD-Video
≥ This unit supports high bit rate audio (Dolby
Digital Plus, Dolby TrueHD, DTS-HD High
Resolution Audio and DTS-HD Master Audio)
adopted in BD-Video.
VQT3V18
月曜日
午後２時４５分
∫ Music CD
≥ Operation and sound quality of CDs that do not
conform to CD-DA specifications (copy control
CDs, etc.) cannot be guaranteed.
≥ The digital audio content side of a DualDisc
does not meet the technical specifications of
the Compact Disc Digital Audio (CD-DA) format
so playback may not be possible.
∫ USB device
≥ This unit does not guarantee connection with all
USB devices.
≥ This unit does not support USB device charging.
≥ [BD77] : When using Wireless LAN Adaptor
DY-WL10, connect it to the rear terminal of this
unit. (> 9)
≥ FAT12, FAT16, FAT32 and NTFS file systems
are supported.
≥ This unit supports USB 2.0 High Speed.
≥ This unit supports an HDD formatted in FAT32
and NTFS. If the HDD is not recognized the
power to the HDD may not be supplied. Supply
power from an external source.
≥ It may not be possible to play the above media in some
cases due to the type of media, the condition of the
recording, the recording method and how the files were
created.
≥ The producers of the disc can control how discs are
played, so you may not always be able to control play as
described in this Owner’s Manual. Read the disc’s
instructions carefully.
DMP-BD87_77_VQT3V18_eng.book 7 ページ
２０１１年１１月４日
金曜日
午前１０時４１分
11
12
13
14
15
16
17
18
19
20
10
10
11
12
13
14
15
16
17
18
19
20
Turn the unit on and off
TV operation buttons
You can operate the Panasonic TV through
the unit’s remote control. (Depending on the
TV these buttons may not work.)
[Í TV POWER] : Turn the television on and off
[AV] : Switch the input select
[i j VOL] : Adjust the volume
Select title numbers, etc./Enter numbers or
characters
Cancel
Select audio (> 16)
Basic playback control buttons (> 16)
Show status messages (> 17)
Show Pop-up menu/Top menu (> 17)
Show Option menu (> 21)
Color buttons
Used for various purposes depending on the
display
Transmit the remote control signal
Open or close the disc tray (> 14)
Show NETFLIX screen
Switch on/off Secondary Video
(Picture-in-picture) (> 22)
Show Setup menu (> 23)
Exit the menu screen
Show the selection screen of network
features (> 18)
Show HOME menu (> 14)
[3, 4, 2, 1] : Move the highlight for selection
[OK] : Confirm the selection
(;1) : Frame-by-frame (> 16)
Return to previous screen
POWER button (POWER Í/I) (> 11)
Press to switch the unit from on to standby
mode or vice versa. In standby mode, the unit
is still consuming a small amount of power.
Disc tray (> 14)
USB port (> 14)
Display (> 31)
6 7
Remote control signal sensor
Distance: Within approx. 7 m (23 feet)
Angle: Approx. 20e up and down, 30e left and
right
Stop (> 16)
Start play (> 16)
Open or close the disc tray (> 14)
Rear panel terminals (> 8–9)
VQT3V18
Getting started
Control reference guide
DMP-BD87_77_VQT3V18_eng.book 8 ページ
２０１１年１０月２４日
月曜日
午後２時４５分
STEP 1 : Connecting to a TV
Perform either one of the following connections in accordance with your TV input terminal.
≥ Before making any connections we suggest you temporarily disconnect all the units from AC power.
≥ Do not connect video signals through a video recorder. Due to copy guard protection the picture may
not be displayed properly.
≥ Please use High Speed HDMI Cables that have the HDMI logo. It is recommended that you use Panasonic’s
HDMI cable. When outputting 1080p signal, please use HDMI cables 5.0 meters (16.4 ft.) or less.
Recommended part number (High Speed HDMI Cable):
RP-CDHS15 (1.5 m/4.9 ft.), RP-CDHS30 (3.0 m/9.8 ft.), RP-CDHS50 (5.0 m/16.4 ft.), etc.
HDMI AV OUT (High quality)
HDMI IN
HDMI cable
VIDEO OUT (Standard quality)
VIDEO IN
AUDIO IN
Audio/Video cable
≥ Connect terminals of the same color.
STEP 2 : Connecting to an amplifier/receiver
Perform either one of the following connections in accordance with your amplifier/receiver input terminal.
HDMI AV OUT
HDMI cable
HDMI cable
HDMI IN
HDMI OUT
(ARC)
HDMI IN
(ARC)
Amplifier/receiver
≥ Set “Digital Audio Output” (> 23).
≥ When using the TV or amplifier/receiver that does not have the indication of “(ARC)”
(non-ARC-compatible) on the HDMI terminal, in order to enjoy TV’s sound by amplifier/receiver it is
also required to connect the amplifier/receiver and TV using an optical digital cable.
VQT3V18
DMP-BD87_77_VQT3V18_eng.book 9 ページ
２０１１年１１月４日
金曜日
午前１０時４１分
STEP 3 : Connecting to the network
The following services can be used when this unit is connected to broadband.
≥ Firmware can be updated (> 13)
≥ You can enjoy BD-Live (> 17)
≥ You can enjoy Network Service (> 18)
≥ You can access other devices (DLNA) (> 19)
For details about connection method, refer to the instructions supplied with the connected equipment.
Wireless LAN connection
Connections & Settings
– [BD87] : This unit can be connected to a Wireless router wirelessly.
– [BD77] : Connect the Wireless LAN Adaptor DY-WL5 (optional).
[BD87]
[BD77]
Wireless router, etc.
Internet
≥ For up to date compatibility information on your Wireless router refer to
http://panasonic.jp/support/global/cs/
(This site is in English only.)
For additional information about this unit refer to
http://www.panasonic.com/consumer/support (For U.S.A.)
≥ The unit is not compatible with public wireless LAN services provided in airports, stations, cafes etc.
≥ Precautions of Wireless LAN connection (> 32)
≥ [BD77]
– Only the Wireless LAN Adaptor DY-WL5 (optional) can be used.
– Read the operating instructions for the Wireless LAN Adaptor DY-WL5 (optional) thoroughly when
using it.
– To simultaneously connect the Wireless LAN Adaptor DY-WL5 (optional) and a LAN cable, use the
extension cable supplied with the DY-WL5.
LAN cable connection
LAN Cable
Broadband router, etc.
Internet
≥ Use category 5 or above straight LAN cables (STP) when connectiong to peripheral devices.
≥ Inserting any cable other than a LAN cable in the LAN terminal can damage the unit.
VQT3V18
DMP-BD87_77_VQT3V18_eng.book 10 ページ
２０１１年１０月２４日
月曜日
午後２時４５分
STEP 4 : Connecting to an AC power source
઒
To a household AC outlet
AC power supply cord (supplied)
≥ This unit consumes a small amount of AC power (> 33) even when turned off. In the interest of
power conservation, if you will not be using this unit for an extended period of time, it can be
disconnected.
10
VQT3V18
２０１１年１０月２４日
STEP 5 : Settings
Easy Setting
After connecting your new player for the first time
and pressing [Í], a screen for the basic settings
will appear.
After completing “Easy Setting”, you can perform
“Network Easy Setting”.
Wired connection
Select “Wired”.
Network Easy Setting
Select a connection mode.
Current setting
: Wired
LAN cable connection:
Connect a LAN cable to the unit and select "Wired."
Press [Í].
Wireless LAN connection:
Select "Wireless."
Setup screen appears.
午後２時４５分
Network Easy Setting
Preparation
Turn on the television and select the
appropriate video input on the television.
月曜日
Follow the on-screen instructions and
make the settings.
Wired
Wireless
OK
RETURN
≥ You can perform this setup anytime by selecting “Easy
Setting” in the Setup menu. (> 25)
≥ If this unit is connected to a Panasonic TV (VIERA)
supporting HDAVI Control 2 or later via an HDMI cable,
then setting information on the TV such as “On-screen
Language” is acquired by this unit.
Follow the on-screen instructions to make your
connection settings.
Wireless connection
Preparation
≥ Obtain your network name (> 12, SSID).
≥ If your wireless connection is encrypted
please be sure that you know your
encryption key.
≥ [BD77] : If “Wireless LAN Adaptor is not connected.”
is displayed, check that the Wireless LAN Adaptor is
fully inserted. Alternatively, disconnect and reconnect
it. If there is still no change in the display, consult
your dealer for advice.
Select “Wireless”.
Select “Search for wireless network” or
“WPS (PUSH button method)” , then
follow the on-screen instructions and
make the settings.
Wireless Settings
Select a connection method.
Please refer to the operating instructions of your wireless
access point about connection methods.
Search for wireless network
WPS (PUSH button method)
∫ “WPS (PUSH button method)”
If you are using a Wireless router that supports
WPS (Wi-Fi Protected Setup), you can easily
perform the settings.
VQT3V18
11
Connections & Settings
DMP-BD87_77_VQT3V18_eng.book 11 ページ
DMP-BD87_77_VQT3V18_eng.book 12 ページ
２０１１年１０月２４日
∫ “Search for wireless network”
The available wireless networks will be displayed.
1 Select your network name.
≥ If your network name is not displayed search
again by pressing the [R] button on the
remote control. Stealth SSID will not be
displayed, in this case enter manually.
Wireless Settings
Select a wireless network for connection.
Network name (SSID)
Reception
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX
月曜日
午後２時４５分
To enter SSID manually
If your SSID is not displayed in step 1, follow
these steps.
1 To display SSID input screen :
Press [HOME] > select “Setup” > select
“Player Settings” > select “Network” > select
“Network Settings” > select “Wireless
Settings” > select “Connection Setting” >
select “Manual setting”
2 Select “SSID” and enter your SSID.
Wireless Settings
Enter your network name (SSID) to connect.
SSID
Set
OK
R Search again
RETURN
SUB
MENU
When your wireless network is encrypted
2 Select “Encryption Key”.
Wireless Settings
Enter the encryption key of the wireless network.
Encryption Key
Set
3 Enter your encryption key.
Encryption Key (Touch Pad Mode)
SOCC_
Shift
Delete
Input Mode
Finish
TENTATIVE
R S T U 7 8
SPACE
Symbols
‘
“
Standard
Characters
Other
Characters
≥ If your wireless network is encrypted, go to step
2.
≥ Refer to the operating instructions of the hub or router.
≥ WPS (Wi-Fi Protected Setup) is a standard that facilitates
settings relating to the connection and security of wireless
LAN devices. To see whether your Wireless router
supports WPS, check the Wireless router operating
instructions.
≥ You can perform this setup anytime by selecting “Network
Easy Setting” in the Setup menu. (> 24)
≥ You can redo these settings individually using “Network
Settings”. (> 24)
≥ Do not use this unit to connect to any wireless network for
which you do not have usage rights.
During automatic searches in a wireless network
environment, wireless networks (SSID*) for which you
do not have usage rights may be displayed; however,
using these networks may be regarded as illegal access.
≥ After performing network settings on this unit, the settings
(encryption level, etc.) of the Wireless router might change.
When you have trouble getting online on your PC, perform
the network settings on your PC in accordance with the
settings of Wireless router.
≥ Please be aware that connecting to a network without
encryption may result in the content of the communication
being illegitimately viewed by a third party, or the leaking of
data such as personal or secret information.
* An SSID (Service Set IDentification) is a name used by
wireless LAN to identify a particular network.
Transmission is possible if the SSID matches for both
devices.
12
VQT3V18
２０１１年１０月２４日
Reprogramming the
remote control
If you have more than one Panasonic player/
recorder and the remote control operates both
products at once, you will
need to change the remote control code to
prevent this occurrence. (> 26, “Remote Control
Code”)
月曜日
午後２時４５分
Firmware updates
Occasionally, Panasonic may release updated
firmware for this unit that may add or improve the
way a feature operates. These updates are
available free of charge.
This unit is capable of checking the firmware
automatically when connected to the Internet via
a broadband connection.
When a new firmware version is available, the
following message is displayed.
New firmware is available.
Please update firmware in Setup.
To update the firmware
Press [HOME] > select “Setup” > select
“Player Settings” > select “System Settings”
> select “Firmware Update” > select “Update
Now”
DO NOT DISCONNECT the unit from the AC
power or perform any operation while the update
takes place.
After the firmware is installed, “FINISH” will be
displayed on the unit’s display. Unit will restart
and the following screen will be displayed.
The firmware was updated.
Current Version: x.xx
OK
RETURN
≥ If downloading on this unit fails or this unit is not
connected to the Internet, then you can download the
latest firmware from the following website and burn it
to a CD-R to update the firmware.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
To show the firmware version on this unit.
(> 26, “System Information”)
≥ Downloading will require several minutes. It may take
longer or may not work properly depending on the
connection environment.
≥ If you do not want to check for the latest firmware version,
set “Automatic Update Check” to “Off”. (> 26)
VQT3V18
13
Connections & Settings
DMP-BD87_77_VQT3V18_eng.book 13 ページ
DMP-BD87_77_VQT3V18_eng.book 14 ページ
２０１１年１０月２４日
Inserting or removing
media
Playback
TENTATIVE
CALL
SD CARD
午後２時４５分
HOME menu
Major functions of this unit can be operated from
the HOME menu.
Preparation
Turn on the television and select the appropriate
video input on the television.
Press [Í] to turn on the unit.
Press [OK] or [3, 4, 2, 1] to select the
item.
HOME
≥ When inserting a media, ensure that it is facing
the right way up.
≥ If you connect a Panasonic product with a USB
connection cable, the setup screen may be
displayed on the connected equipment. For
details, refer to the instructions for the
connected equipment.
CAUTION
Do not place objects in front of the unit. The disc
tray may collide with objects when it is opened,
and this may cause malfunction.
月曜日
USER1
Network
Blu-ray Disc Player
Photos
Setup
Music
Videos
USER1
2 Add
≥ If there are any other items, repeat this step.
Videos/Photos/Music
Disc
USB
Play back the contents. (> 16)
≥ When multiple contents are
recorded, select the types of
contents or the title.
Network
Internet
Content
Displays the Home screen of
Network Service. (> 18)
Home
Network
DLNA Client (> 19)
Media Renderer (> 19)
Setup
Player
Settings
(> 23)
USB
(> 17)
Management
Wallpaper
Changes the screen
background of HOME menu.
To show the HOME menu
Press [HOME].
≥ Items to be displayed may vary with the media.
≥ Where necessary, set “Mixed Data Disc Option” when
using a disc with both data files (MP3, JPEG, MKV) and
Video. (> 26)
14
VQT3V18
DMP-BD87_77_VQT3V18_eng.book 15 ページ
２０１１年１０月２４日
Multi-user mode
Up to 4 people can be registered as the users and
the settings of wallpaper, and picture and audio
quality etc. are saved respectively.
Each member of your family can use the unit with
their own settings.
月曜日
午後２時４５分
Switching the user
∫ Using color buttons
Press the color buttons in the Home menu to
switch to the user corresponding to the
button.
HOME
USER1
Network
Blu-ray Disc Player
Photos
Setup
Music
Videos
USER1
2 Add
A The user name and icon currently selected.
B Register a new user and switch the users
with color buttons.
Playback
Registering a new user
Press [HOME].
Press a color button that indicates new
user registration.
Select an item and change the settings
according to the indications.
Following items can be set.
Enter Nickname
Register a user name.
(TENTATIVE)
Select Icon
(TENTATIVE)
Register a user icon. Images
in recording media can be
registered.
Select
Wallpaper
(TENTATIVE)
Rgister a screen background
of the Home menu.
Select “Confirm Settings (TENTATIVE)”.
To change the registered user information
Select “Edit User Information” from Setup menu.
(> 26)
VQT3V18
15
DMP-BD87_77_VQT3V18_eng.book 16 ページ
２０１１年１０月２４日
Playback
Insert the media.
Playback starts depending on the media.
Select the item to play.
Repeat this procedure if necessary.
≥ DISCS CONTINUE TO ROTATE WHILE MENUS ARE
DISPLAYED. Press [∫STOP] when you have finished
playback to protect the unit’s motor, your television screen
and so on.
≥ MKV : Successive play is not possible.
≥ It is not possible to playback AVCHD and MPEG2 video
which have been dragged and dropped, copied and pasted
to the media.
≥ Still pictures displayed as “
” cannot be played back
with this unit.
≥ To save on electricity, the power is turned off automatically
if there is no button operation for about 30 minutes when
not playing back (such as when paused, displaying the
menu, displaying still pictures, etc.). (Compatible with
ENERGY STAR)
月曜日
午後２時４５分
Operations during playback
These functions may not work depending on the
media and contents.
Stop
Press [∫STOP].
The stopped position is memorized.
Resume play function
Press [1PLAY] to restart from this position.
≥ The position is cleared if the tray is opened or
you press [∫STOP] several times to display
“STOP” on the unit’s display.
≥ On BD-Video discs including BD-J, the
resume play function does not work.
Pause
Press [;PAUSE].
≥ Press [;PAUSE] again or [1PLAY] to restart play.
Search/Slow-motion
Search
While playing, press [SEARCH6] or
[SEARCH5].
≥ Music and MP3: The speed is fixed to a single step.
Slow-motion
While paused, press [SEARCH6] or
[SEARCH5].
≥ BD-Video and AVCHD: [SEARCH5] only.
The speed increases up to 5 steps.
≥ Press [1PLAY] to revert to normal playback speed.
Skip
While playing or paused, press [:] or [9].
Skip to the title, chapter or track.
Frame-by-frame
While paused, press [2] (2;) or [1] (;1).
≥ Press and hold to change in succession forward
or backward.
≥ Press [1PLAY] to revert to normal playback speed.
≥ BD-Video and AVCHD: [1] (;1) only.
Changing audio
Press [AUDIO].
You can change the audio channel number or
soundtrack language, etc.
16
VQT3V18
DMP-BD87_77_VQT3V18_eng.book 17 ページ
２０１１年１０月２４日
Displaying menus and
playback information
Press [POP-UP MENU/TOP MENU].
≥ Press [3, 4, 2, 1] to select the item and
press [OK].
Show the status messages
While playing, press [STATUS].
The status messages give you information about
what is currently being played. Each time you
press [STATUS], the display information may
change or will disappear from the screen.
≥ Depending on media and contents, the display
may change or may not appear.
e.g.BD-Video
Perform network connection and settings.
(> 9, 11)
Insert a USB memory with 1 GB or more
free space.
≥ The USB device is used as the local
storage.
Insert the disc.
∫ Deleting data on the USB device
Select “USB Management” in the Home menu
(> 14) .
C1
BD-Video
0:05.14
0:20.52
With “BD-Live” featuring discs, you can enjoy
bonus contents that use Internet access.
For this BD-Live function, insertion of a USB
device is necessary along with Internet
connection.
T: Title, C: Chapter, PL: Playlist
B: Elapsed time in the title
C: Current position
D: Total time
Play
≥ The usable functions and the operating method may vary
with each disc, please refer to the instructions on the disc
and/or visit their website.
≥ “BD-Live Internet Access” may need to be changed for
certain discs (> 25).
≥ During search/slow-motion or frame-by-frame, only the
primary video is displayed.
e.g.Jpeg
Date
11/12/2007
Size
500 x 375
Manufacturer
Equipment
1 / 26
VQT3V18
17
Playback
T1
午後２時４５分
Enjoying BD-Live
Show top menu/pop-up
menu
月曜日
DMP-BD87_77_VQT3V18_eng.book 18 ページ
２０１１年１０月２４日
Enjoying Network
Service
(Netflix, etc.)
You can enjoy Network Service.
Network Service provides a variety of
selected Internet services such as the
followings.
≥ Online movie rental service
≥ Video browsing service
Settings
TENTATIVE
Internet
* Images are for illustration purposes, contents may change
without notice.
Preparation
≥ Network connection (> 9)
≥ Network setting (> 11)
Press [NETWORK].
≥ NETFLIX can be accessed directly by
pressing [NETFLIX] button.
Press [1] to select “Internet Content”.
Select the item.
To exit from Network Service
Press [EXIT], [HOME] or [POP-UP MENU/TOP
MENU].
18
VQT3V18
午後２時４５分
≥ When playing content in the media, Network Service
cannot be accessed by pressing [NETWORK].
≥ In the following cases, settings are possible using “Internet
Content Settings” (> 24)
– When restricting the use of Network Service.
– When the audio is distorted.
– When wrong time is displayed
≥ If using slow Internet connection, the video may not be
displayed correctly. A high-speed Internet service with a
speed of at least 6 Mbps is recommended.
≥ Be sure to update the firmware when a firmware update
notice is displayed on the screen. If the firmware is not
updated, you will not be able to use Network Service
function. (> 13)
≥ Network Service home screen is subject to change without
notice.
≥ The services through Network Service are operated by
their respective service providers, and service may be
discontinued either temporarily or permanently without
notice. Therefore, Panasonic will make no warranty for the
content or the continuity of the services.
≥ All features of websites or content of the service may not
be available.
≥ Some content may be inappropriate for some viewers.
≥ Some content may only be available for specific countries
and may be presented in specific languages.
Network Service
月曜日
DMP-BD87_77_VQT3V18_eng.book 19 ページ
２０１１年１０月２４日
DLNA feature
Playing back contents on
the DLNA server
You can share photos, videos and music stored in
the DLNA Certified media server (PC with
windows7 installed, smartphone, etc) connected
to your home network, and enjoy the contents
with this player.
月曜日
午後２時４５分
Using the Digital Media
Controller
You can use the smartphone, etc. as the Digital
Media Controller (DMC) to play back contents
from DLNA server on the Renderer (this unit).
Possible applications:
TENTATIVE
Server
Renderer
Controller*
Server
Preparation
1 Perform network connection (> 9) and
network settings (> 11) of this unit.
2 Perform Home Network settings of the
connected equipment.
3 Add the contents and folder to the libraries of
the Windows Media® Player or the
smartphone, etc.
≥ Playlist of Windows Media® Player can play
back only the contents that are stored in the
libraries.
Press [HOME].
Select “Network”.
Select “Home Network”.
Select “DLNA Client”.
TENTATIVE
Renderer
Server
Controller*
* DMC compatible software should be installed.
Preparation
Perform steps 1 to 3. (> left )
4 Perform the “Remote Device Settings”. (> 25)
≥ You can register up to 16 equipment.
Press [HOME].
Select “Network”.
Select “Home Network”.
Select “Media Renderer”.
Operate the DMC compatible equipment.
To exit from Media Renderer screen
Press [HOME].
≥ This list can be updated by pressing [R] on
the remote control.
Select the equipment.
Select the item to play.
≥ You may be able to use convenient
functions depending on the content by
pressing [OPTION].
≥ Control Panel is displayed once the
playback starts. Press [OK] if the Control
Panel is not displayed, and press
[RETURN] to hide the Control Panel.
To exit from Home Network
Press [EXIT], [HOME] or [POP-UP MENU/TOP
MENU].
For more details, refer to the following website
and the operating instructions for each item of
equipment.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
≥ Ensure that the router for your home network has adequate
security system to prevent unauthorized access.
≥ Depending on the contents and the connected equipment,
playback may not be possible.
≥ Items displayed in gray on the display cannot be played
back by this unit.
≥ This unit can be played back via connected equipment only
when controlled using DMC.
≥ Depending on the performance of the connected PC, video
frames may be dropped during playback, or video may not
be played back at all.
VQT3V18
19
Playback
Player
઒
DMP-BD87_77_VQT3V18_eng.book 20 ページ
２０１１年１０月２４日
VIERA LinkTM
“HDAVI ControlTM”
What is VIERA Link “HDAVI Control”?
VIERA LinkTM is a new name for EZ
SyncTM.
VIERA Link “HDAVI Control” is a
convenient function which will link the
operations of this unit and a Panasonic
TV (VIERA) or amplifier/receiver under
“HDAVI Control”.
You can use this function by connecting
the equipment with an HDMI cable. See
the operating instructions for connected
equipment for operational details.
Preparation
1 Set “VIERA Link” to “On” (> 26). (The default
setting is “On”.)
2 Set the “HDAVI Control” operations on the
connected equipment (e.g., TV).
3 Turn on all “HDAVI Control” compatible
equipment and select this unit’s input channel
on the connected TV so that the “HDAVI
Control” function works properly.
Also when the connection or settings are
changed, repeat this procedure.
Automatic input switching
Power on link
When play starts on the unit, the TV will
automatically switch the input channel and display
the corresponding action.
Additionally when the TV is off, the TV will
automatically turn on.
20
VQT3V18
月曜日
午後２時４５分
Power off link
All connected equipment compatible with “HDAVI
Control”, including this unit, automatically turns off
when you switch the television off.
≥ This unit supports “HDAVI Control 1” function.
This standard is compatible with Panasonic’s conventional
HDAVI equipment.
≥ VIERA Link “HDAVI Control”, based on the control
functions provided by HDMI which is an industry standard
known as HDMI CEC (Consumer Electronics Control), is a
unique function that we have developed and added. As
such, its operation with other manufacturers’ equipment
that supports HDMI CEC cannot be guaranteed.
≥ Please refer to individual manuals for other manufacturers’
equipment supporting VIERA Link function.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Modify Date                     : 2011:12:23 19:11:36+08:00
Create Date                     : 2011:12:23 19:11:32+08:00
Metadata Date                   : 2011:12:23 19:11:36+08:00
Format                          : application/pdf
Title                           : untitled
Document ID                     : uuid:e185e282-770e-41f9-a37a-91cd9fad7517
Instance ID                     : uuid:cc0aa22e-e68d-471d-ab82-51d556ae5665
Producer                        : Acrobat Distiller 8.2.5 (Windows)
Page Count                      : 20

EXIF Metadata provided by EXIF.tools