TCL Technoly Electronics OH000010 Bluetooth Module User Manual XXXX Module Datasheet

Download:
Mirror Download [FCC.gov]
Document ID	3589407
Application ID	gTKURAB/S1xYSROjcg0EPg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	Yes
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	69.06kB (863263 bits)
Date Submitted	2017-10-02 00:00:00
Date Available	2017-10-02 00:00:00
Creation Date	2017-08-02 10:45:12
Producing Software	Microsoft® Office Word 2007
Document Lastmod	2017-08-02 10:45:12
Document Title	XXXX Module Datasheet
Document Creator	Microsoft® Office Word 2007
Document Author:	吴云海

Bluetooth Module Datasheet
蓝牙模组规格说明书
版本 Version：V1.0
公布日期 Release Date: 2017-06-28
TONLY ELECTRONICS HOLDINGS LIMITED.通力电子控股有限公司
Address:Section 37, Zhongkai Hi-tech Development Zone, Huizhou Guangdong 516006,
P.R.China
地址：中国广东省惠州市仲恺高新区惠风 6 路 37 号小区
网址 http://www.tonlyele.com
©2015 TONLY ELECTRONICS HOLDINGS LIMITED. All rights reserved 保留所有版权
XXXX Module Datasheet
法律声明 Legal Notice,Disclaimer,Copyright
本手册是通力电子控股有限公司机密，未经能力电子控股有限公司的事先书面许可，任何人不得复制、
传播本手册的内容。通力电子控股有限公司不对由使用本手册或执行本手册内容带来的损害负责。
本手册所涉及的知识产权归通力电子控股有限公司所有（或经合作商授权许可使用）
，任何人不得侵
犯。
本手册是按当前状态提供参考，本公司司保留随时更新本手册的权利,恕不另行通知。
本手册不对包括但不限于下列事项担保：适销性、特殊用途的适应性;实施该用途不会侵犯第三方的知
识产权等权利。 本文档在此未以禁止反言或其它方式授予任何知识产权使用许可，不管是明示许可还是暗
示许可。
本手册中提到的所有商标名称、商标和注册商标均属其各自所有者的财产，特此声明.
本协议以中、英文两种语言制作，两种语言文本冲突时，任何时候均以英文为准。
This data sheet contains information that is confidential to TONLY ELECTRONICS HOLDINGS
LIMITED. Unauthorized use or disclosure of the information contained herein is prohibited. You
may be held responsible for any loss or damages suffered by TONLY ELECTRONICS HOLDINGS
LIMITED . for your unauthorized disclosure hereof, in whole or in part.
Information herein is subject to change without noticed. TONLY ELECTRONICS HOLDINGS
LIMITED does not assume any responsibility for any use of, or reliance on, the information
contained herein
THIS DATA SHEET AND ALL INFORMATION CONTAINED HEREIN IS PROVIDED “AS IS”
WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE.
TONLY
ELECTRONICS
HOLDINGS
LIMITED.
SPECIFICALLY
DISCLAIMS
ALL
IMPLIED
WARRANTIES OF MERCHANTABILITY, NON-INFRINGEMENT, AND FITNESS FOR A PARTICULAR
PURPOSE. NEITHER DOES TONLY ELECTRONICS HOLDINGS LIMITED. PROVIDE ANY
WARRANTY WHATSOEVER WITH RESPECT TO THE SOFTWARE OF ANY THIRD PARTY WHICH
MAY BE USED BY, INCORPORATED IN, OR SUPPLIED WITH THIS DATA SHEET, AND USER AGREES
TO LOOK ONLY TO SUCH THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. TONLY
ELECTRONICS HOLDINGS LIMITED. SHALL ALSO NOT BE RESPONSIBLE FOR ANY TONLY
ELECTRONICS HOLDINGS LIMITED DELIBERABLES MADE TO USER’S SPECIFICATION OR TO
CONFORM TO A PARTICULAR STANDARD OR OPEN FORUM.
Tonly is a trademark of TONLY ELECTRONICS HOLDINGS LIMITED. other names mentioned in this
document are trademarks/registered trademark of their respective owners.
This data shall be executed in two languages including one Chinese and one English. Any conflict
exist between the two languages, the English will prevail in any time.
TONLY ELECTRONICS HOLDINGS LIMITEDConfidential
XXXX Module Datasheet
版本变更说明 Document Revision History
Revision
Date
Author
Description
版本
日期
作者
描述
V1.0
2017-06-28
孙强耀
First release.
TONLY ELECTRONICS HOLDINGS LIMITEDConfidential
XXXX Module Datasheet
目录 Table of Contents

法律声明 Legal Notice,Disclaimer,Copyright

文档变更说明 Document Revision History

目录 Table of contents

1.系统概览 System overview
 1.1 通用说明 General Descriptions
 1.2 性能特点 Features
 1.3 系统方框图 Block Diagram

2.产品描述 Production Description
 引脚与功能说明 Pin Layout & Pin Description
 外观与尺寸 Appearance& Dimension

3.应用说明 ApplicationExplanation

4.电气特性 ElectricalCharacteristics
 工作条件
 直流特性 DC characteristics
 电流消耗 Current consumption

5.射频性能 RF Performance

6.认证与法规信息 Certificate& Regulation

7.包装与订货说明 Package& Ordering information

8.环保声明 Green Policy

9.抗静电保护 ESD Protection
TONLY ELECTRONICS HOLDINGS LIMITEDConfidential
XXXX Module Datasheet
1.系统概览 System overview
 EXM1020 Bluetooth Low Energy Module provides a highly integrated solution
for delivering low power Bluetooth v4.2 solutions. The advanced command
interface offers rapid time to market .

EXM1020 module complies with Bluetooth specification version v4.2. It
integrates RF, a baseband controller,
making it a complete Bluetooth Low
Energy Solution.
 EXM1020can be used with either low cost microcontroller for intelligent
Bluetooth Low Energy applications. For simple sensor applications, the EXM1020
internal scripting capabilities enable basic functions to be implemented
without the need for external host MCU or software development tools
TONLY ELECTRONICS HOLDINGS LIMITEDConfidential
XXXX Module Datasheet
2.产品说明 Production Description

Fully qualified Bluetooth version 4.2 low Energy Module

Command interface API over SPI

Castellated SMT pads for easy and reliable PCB Mounting

Environmentally friendly, RoHS compliant

Device Firmware Upgrade (DFU) over SPI or Over the Air (OTA)

Remote commands over the air

Antenna ready

Figure as below.
TONLY ELECTRONICS HOLDINGS LIMITEDConfidential
XXXX Module Datasheet
Pin feature descriptions
PIN
Symbol
Description
Function
VSS[4]
GND.
GND
VSS[5]
GND.
GND
I2S_WS
I2S_CLK
Continuous serial clock
PIO[12]
I2S_SDA
Serial data
PIO[11]
PIO10
Programmable I/O.
PIO[10]
VDD_Flash
Power supply for Flash
Type 3.3V
PIO9
Programmable I/O.
PIO[9]
PIO8
Programmable I/O
PIO[8]
10
Flash1_D0
External flash data in
PIO[5]
11
Flash1_CLK
External flash CLK
PIO[6]
12
Flash1_DI
External flash data out
PIO[4]
13
Flash1_CS
External flash CS
PIO[6]
14
SPI_MIOS
Programmable I/O line or debug SPI
•SPI_MISO
MISO selected by SPI_PIO#.
•PIO[3]
Programmable I/O line or debug SPI
•SPI_MOSI
MOSI selected by SPI_PIO#.
•PIO[2]
Programmable I/O line or debug
•SPI_CS#
SPIchip
•PIO[1]
NO.
15
16
SPI_MOSI
SPI_CS#
Word select
select
PIO[13]
(CS#)
selected
bySPI_PIO#
17
SPI_CLK
Programmable I/O line or debug SPI
•SPI_CLOCK
TONLY ELECTRONICS HOLDINGS LIMITEDConfidential
XXXX Module Datasheet
18
SPI_PIO#
CLK selected by SPI_PIO#.
•PIO[0]
SPI/PIOactive-high.
Input with internal pull down;
selects SPI Active-high.
19
PIO[14]
Programmable I/O.
22
VDD_MEM
VBAT for internal flash
23
VDD_BAT
Power supply for moudle
24
AIO[0]
Bi-directional
with
PIO[14]
programmable
Analogue Programmable I/O
analog I/O.
3.应用说明 Application Explanations

Smart Audio

Smart light

IOT
4. 电气特性 Electrical Characteristics
ELECTRICAL CHARACTERISTICS
Supply Voltage
0.9 – 3.6V DC
(Absolute Maximum Ratings 0-3.6V)
Working current
Depends on profiles, 3 mA (typical)
Standby current(disconnected)
3 mA
CURRENT CONSUMPTION
(Power supply DC 3.0V)
Dormant
2.0uA
Deep Sleep
13 uA
Idle
1.5 mA
Tx/Rx active
5.5 mA at 4 dBm/5.5 at -90 dBm
WEIGHT AND DIMENSIONS
(unit : mm)
Size
18 X14 X 2.3 (L x W x H)
Weight
*?G
TONLY ELECTRONICS HOLDINGS LIMITEDConfidential
XXXX Module Datasheet
5.射频性能 RF Performance
Specification
Description
RF performance
Standard
Bluetooth 4.2
Frequency Band
2.4 ~ 2.4835 GHz
Modulation Method
GFSK
Maximum Data Rate
1 Mbps
Antenna
PCB Antenna
Interface
UART, PIO, AIO, SPI,PCM,
Operation Range
30 meters
Sensitivity
-85 dBm at 0.1% BER
RF TX Power
+0 dBm (avg), +4 dBm(peak)
6.认证与法规信息 Certification& Regulation
The BQB Certification：still on-going.
FCC ID： ZVAOH000010
IC： 9976A-OH000010
TONLY ELECTRONICS HOLDINGS LIMITEDConfidential
XXXX Module Datasheet
7.环保声明 Green Policy
This module can meet ROHS&REACH compliance.XXXX
8.抗静电保护 ESD Protection
10
TONLY ELECTRONICS HOLDINGS LIMITEDConfidential
For IC:
This device complies with RSS247 of Industry Canada. Cet appareil se conforme à
RSS247 de Canada d'Industrie. This device complies with Industry Canada licenseexempt RSS standard(s). Operation is subject to the following two conditions: (1)
this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the
device. appareils radio exempts de licence. Son fonctionnement est sujet aux deux
conditions suivantes: (1) le dispositif ne doit pas produire de brouillage
prejudiciable, et (2) ce dispositif doit accepter tout brouillage recu, y compris un
brouillage susceptible de provoquer un fonctionnement indesirable.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme a la norme NMB-003 du
Canada.
The device should be installed and operated with a minimum distance of 20cm between the
radiator and your body.
L'appareil doit être installé et utilisé avec une distance minimale de 20 cm entre le radiateu
et votre corps.
For FCC:
Warning: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
 Reorient or relocate the receiving antenna.
 Increase the separation between the equipment and receiver.
 Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
 Consult the dealer or an experienced radio/TV technician for help.

“The device must not be co-located or operating in conjunction with any other
antenna or transmitter.”
FCC RF Radiation Exposure Statement Caution: To maintain compliance with the
FCC’s RF exposure guidelines, place the product at least 20cm from nearby persons.
This device is intended only for OEM integrators under the following
conditions:
1) The antenna must be installed such that 20 cm is maintained between the antenna
and users, and
2) The transmitter module may not be co-located with any other transmitter or
antenna.
3) For all products market in United States, OEM has to limit the operation channels in CH1
to CH11 for 2.4G band by supplied firmware programming tool. And OEM shall
not supply any tool or info to the end-user regarding to change the domain selection.
As long as 3 conditions above are met, further transmitter test will not be required.
However, the OEM integrator is still responsible for testing their end-product for
any additional compliance requirements required with this module installed (for
example, digital device emissions, PC peripheral requirements, etc.).
IMPORTANT NOTE: In the event that these conditions cannot be met (for
example certain laptop configurations or co-location with another transmitter), then
the FCC authorization is no longer considered valid and the FCC ID cannot be
used on the final product. In these circumstances, the OEM integrator will be
responsible for re-evaluating the end product (including the transmitter) and
obtaining a separate FCC authorization.
End Product Labeling
This transmitter module is authorized only for use in device where the antenna may
be installed such that 20 cm may be maintained between the antenna and users (for
example: Access point, Wireless Router, Notebook, etc.). The final end product
must be labeled in a visible area with the following: “Contains FCC ID:
ZVAOH000010”.
Module Antenna Type: PCB ANT, 1.1dBi gain

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 12
Language                        : zh-CN
Tagged PDF                      : Yes
Title                           : XXXX Module Datasheet
Author                          : 吴云海
Creator                         : Microsoft® Office Word 2007
Create Date                     : 2017:08:02 10:45:12
Modify Date                     : 2017:08:02 10:45:12
Producer                        : Microsoft® Office Word 2007

EXIF Metadata provided by EXIF.tools