TCL Technoly Electronics PS000022 Auvio Mono Plus Bluetooth Speaker User Manual

TCL Technoly Electronics (Huizhou) Co., Ltd. Auvio Mono Plus Bluetooth Speaker

User Manual

2 3 4 5 6 7 8 9bluetooth® speakerWe hope you enjoy your AUVIO Bluetooth Speaker with True Wireless stereo sound capability. Sleek, sturdy and water-resistant, this speaker is ideal for outdoors. It's also designed with a built-in mic and speakerphone so you can take calls as well as listen to music from your smartphone. Please read this user's guide before using your new speaker.Package Contents • Speaker • USBChargingCable •User’s GuideSpecificationsBattery .....................Rechargeable 500mAh lithium polymer BatteryChargingVoltage ................................................. DC5VChargingTime .....................................................approx. 4 hoursPlay Time ................................................................... up to 5 hoursFrequency Response .................... (speaker) 105 Hz – 20 KHzOutput Power ...............................................................................3WImpedance ...........................................................................4 OhmsS/N Ratio ................................................................................≥60dBDriver ............................................... 1.5 in" (38mm) neodymiumBluetooth Protocol ..... V4.2withA2DP,AVRCP,HFPProfileOperation Range.........................................................33 ft. (10m)Water resistance ...................................................................... IPX6Specicationsaresubjecttochangeandimprovementwithoutnotice. Actual product may vary from the images found in this document.Charge Your Speaker1. Lift the cover on the bottom to access the jacks. Then connect the supplied charging cable to the DC IN jack and a USB power source. •LED lights red during chargingandturnsowhenfullycharged.2. Unplugaftercharging,andrmlyreplacethecovertoprotect the jacks from water, dust or dirt.Notes: •You can charge the speaker and use it at the same time. • Whenthebatteryislow,theLEDashesredslowly,andthespeakerwilleventuallyautomaticallyturno.Lithium Battery Notes:• Chargebatteriesonareproofsurfaceawayfromammableitems or liquids. Follow the instructions for charging the speaker and do not charge longer than recommended.• Recyclelithiumbatteries.Donotdisposeoftheminthetrash.Do not burn or bury batteries. Do not puncture or crush. Do not disassemble.• Iftheelectrolyteinthecellsshouldgetonyourskin,thoroughlywash with soap and water. If in the eyes, rinse thoroughly with cool water. Immediately seek medical attention.Connecting to a Bluetooth Device1. Press and hold G 2 seconds to turn on the speaker. • TheLEDashesbluequicklyasyourspeakersearchesfor Bluetooth devices.2. Whenpairingtoadeviceforthersttime,press and hold 2 seconds to start Bluetooth pairing.User’s Guide4000765,4000766,40007673. Activate your device’s Bluetooth function (refer to your device’s user’s guide). When your device locates AUVIO BTS300M, select this from the device list. When paired, the indicator lights blue steadily.4. Use the controls on your device to play music. To adjust volume, you can use the speaker's +/− buttons if paired to an iOS device, or your device's controls.Notes: •The speaker will disconnect and power down from your device if they are too far apart, or left idle. To reconnect, move the speaker closer to the device within 5 minutes. •The last volume setting used on the speaker is memorizedafterswitchingo. •Music playback is paused during call functions and resumes when the call is ended. •The speaker's volume +/− buttons function only for iOS devices. Android system devices excluded.Clear Bluetooth PairingYour speaker automatically reconnects to the most recently paired device when switched on. If you want to change to other Bluetooth devices, or in case of problems pairing, do the following: •Press and hold for2seconds.TheLEDashesquickly and the speaker starts searching for another Bluetooth device.Using True Wireless ModeTo play your music from your smartphone or other Bluetooth-enabled device, for best sound performance you'llneedanadditionalAUVIO4000765,4000766or4000767speaker.Thereisnoneedtopairthesecondspeaker.©2016GeneralWirelessOperationsInc.All rights reserved. AUVIO is a registered trademark used by General Wireless Operations Inc. dba RadioShack.The Bluetooth® word mark and logos are owned by Bluetooth SIG, Inc. and any use of such marks by General Wireless Operations Inc. is under license.05A16Printed in China400076540007664000767BOTTOM VIEWDC INConnecttheincludedUSBcharging cable here to charge. AUXFor line-in listening option.FRONT & TOP VIEW ºTurnon/ospeaker • Callfunctionsonspeakerphone • ClearBluetoothpairingComplieswiththeEuropeanUnion’s“Restrictionof Hazardous Substances Directive,” which protectstheenvironmentbyrestrictingspecichazardous materials and products.True Wireless ActivationMakesureyourrstspeakerispairedandplayingmusicfrom only one Bluetooth device, when using True Wireless mode.1. Switchonyourrstspeaker.ThenpressG and simultaneously. TheLEDashesquicklyand you hear a conrmationtone.2. Switch on your second speaker and press G and volume − simultaneously.TheLEDashesquickly,andyouhearaconrmationtone.3. When True Wireless is successfully activated, the LEDs light steadily on both your speakers, and both speakers beep once simultaneously.4. To swap left/right channel sound on your two speakers, press G and − simultaneously.Dierencesinleft/rightsound may vary depending on how the music track was originally recorded.5. To exit True Wireless immediately and operate as 2 separate speakers, press G and + simultaneously on either one of the speakers. A double beep sounds, andmusiccontinuesplayingontherstspeakeronly.Remembertoswitchothesecondspeakertosavepower.Notes: •Smart Power O: During True Wireless playback, press Goneitherspeakertoswitchobothspeakerssimultaneously. •Smart True Wireless: Once activated, True Wireless is memorized by your speakers, even after you press G and + to exit. True Wireless is the default playback mode when you next switch on the two speakers. •Troubleshooting TW Activation:Incaseofdicultyactivating,turnoeachspeaker.Thenswitchtherstspeaker on again, followed by the second speaker, and start playing a song. Wait a few seconds to hear if True Wireless has been activated. If not, repeat True Wireless Activation and complete steps 1-3 above within 3 minutes. Connecting with AUXFor device players without Bluetooth functionality, use an ⅛"(3.5mm)audiocable(notincluded)toconnecttothespeaker’s AUX jack.Note: Bluetooth functionality is automatically deactivated when AUX is connected.Resetting the SpeakerIn case the speaker's buttons are not functioning properly during operation, press both + and − at the same time for 5 seconds to reset andswitcho the speaker. Any previous TW activation will not be lost.Handling and CareAlwaysmakesuretherubberapsaresecurelyttedwhen not using the line in or charging jacks. This speaker is designedtobewaterproofincompliancewithIEC60529IPX6.Afterexposingtowater,cleanthespeakerwithasoftdry cloth and leave to dry in a well-ventilated place away from direct sunlight.FCC InformationThis equipment has been tested and found to comply with thelimitsforaClassBdigitaldevice,pursuanttoPart15oftheFCCRules.Theselimitsaredesignedtoprovidereasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is To... Button PressTurnon/ospeaker G...and hold 2 secStart Bluetooth pairing ...and hold 2 secClearBluetoothpairingVolume up/ down +/ −...quickly, or press and holdCallsAnswer/ end call ×1Reject an incoming call ...and hold 2 secSwitch to an incoming call and end the current callTrue Wireless (TW)ActivateTWonrstspeaker G, −...both buttons at same timeActivate TW on 2nd speaker G, ...both buttons at same timeSwap left/ right channel G, −...both buttons at same timeDeactivate True Wireless G, +Controls Overview LEDsBlue in Bluetooth/ call mode: • ashesquickly−pairing/incomingcall • ashesslowly−Bluetoothdisconnected • lightssteadily−connected;engagedincall.Red: charging+/−Adjust volumeMic ORno guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turningtheequipmentoandon,theuserisencouragedtotry to correct the interference by one or more of the following measures:• Reorientorrelocatethereceivingantenna.• Increasetheseparationbetweentheequipmentandreceiver. • Connecttheequipmentintoanoutletonacircuitdierentfrom that to which the receiver is connected. • Consultyourdealeroranexperiencedradio/TVtechnicianfor help.Changesormodicationsnotexpresslyapprovedbythepartyresponsible for compliance could void the user’s authority to operate the equipment.ThisdevicecomplieswithPart15oftheFCCRules.Operationissubject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.1-Year Limited WarrantyGo to www.radioshack.com/help for details.RadioShackCustomerRelations300RadioShackCircle,FortWorth,TX76102www.radioshack.com4000765_6_7_UG_EN.indd 1-9 5/10/2016 3:01:42 PM

Navigation menu