TCL Technoly Electronics PS000022 Auvio Mono Plus Bluetooth Speaker User Manual

TCL Technoly Electronics (Huizhou) Co., Ltd. Auvio Mono Plus Bluetooth Speaker

User Manual

2 3 4 5 6 7 8 9
bluetooth
®
speaker
We hope you enjoy your AUVIO Bluetooth Speaker with
True Wireless stereo sound capability. Sleek, sturdy and
water-resistant, this speaker is ideal for outdoors. It's also
designed with a built-in mic and speakerphone so you can
take calls as well as listen to music from your smartphone.
Please read this user's guide before using your new
speaker.
Package Contents
• Speaker • USBChargingCable
•User’s Guide
Specifications
Battery .....................Rechargeable 500mAh lithium polymer
BatteryChargingVoltage ................................................. DC5V
ChargingTime .....................................................approx. 4 hours
Play Time ................................................................... up to 5 hours
Frequency Response .................... (speaker) 105 Hz – 20 KHz
Output Power ...............................................................................3W
Impedance ...........................................................................4 Ohms
S/N Ratio ................................................................................≥60dB
Driver ............................................... 1.5 in" (38mm) neodymium
Bluetooth Protocol ..... V4.2withA2DP,AVRCP,HFPProfile
Operation Range.........................................................33 ft. (10m)
Water resistance ...................................................................... IPX6
Specicationsaresubjecttochangeandimprovementwithout
notice. Actual product may vary from the images found in this
document.
Charge Your Speaker
1. Lift the cover on the
bottom to access the
jacks. Then connect the
supplied charging cable
to the DC IN jack and a
USB power source.
•LED lights red during
chargingandturnsowhenfullycharged.
2. Unplugaftercharging,andrmlyreplacethecoverto
protect the jacks from water, dust or dirt.
Notes:
•You can charge the speaker and use it at the same time.
• Whenthebatteryislow,theLEDashesredslowly,and
thespeakerwilleventuallyautomaticallyturno.
Lithium Battery Notes:
• Chargebatteriesonareproofsurfaceawayfromammable
items or liquids. Follow the instructions for charging the
speaker and do not charge longer than recommended.
• Recyclelithiumbatteries.Donotdisposeoftheminthetrash.
Do not burn or bury batteries. Do not puncture or crush. Do
not disassemble.
• Iftheelectrolyteinthecellsshouldgetonyourskin,thoroughly
wash with soap and water. If in the eyes, rinse thoroughly with
cool water. Immediately seek medical attention.
Connecting to a Bluetooth Device
1. Press and hold G 2 seconds to turn on the speaker.
• TheLEDashesbluequicklyasyourspeakersearches
for Bluetooth devices.
2. Whenpairingtoadeviceforthersttime,press and
hold
2 seconds to start Bluetooth pairing.
User’s Guide
4000765,4000766,4000767
3. Activate your device’s Bluetooth function (refer to
your device’s user’s guide). When your device locates
AUVIO BTS300M, select this from the device list.
When paired, the indicator lights blue steadily.
4. Use the controls on your device to play music. To adjust
volume, you can use the speaker's +/− buttons if paired
to an iOS device, or your device's controls.
Notes:
•The speaker will disconnect and power down from your
device if they are too far apart, or left idle. To reconnect,
move the speaker closer to the device within 5 minutes.
•The last volume setting used on the speaker is
memorizedafterswitchingo.
•Music playback is paused during call functions and
resumes when the call is ended.
•The speaker's volume +/− buttons function only for iOS
devices. Android system devices excluded.
Clear Bluetooth Pairing
Your speaker automatically reconnects to the most recently
paired device when switched on. If you want to change to
other Bluetooth devices, or in case of problems pairing, do
the following:
•Press and hold
for2seconds.TheLEDashes
quickly and the speaker starts searching for another
Bluetooth device.
Using True Wireless Mode
To play your music from your smartphone or other
Bluetooth-enabled device, for best sound performance
you'llneedanadditionalAUVIO4000765,4000766or
4000767speaker.Thereisnoneedtopairthesecond
speaker.
©2016GeneralWirelessOperationsInc.
All rights reserved. AUVIO is a registered
trademark used by General Wireless
Operations Inc. dba RadioShack.
The Bluetooth® word mark and logos are owned by
Bluetooth SIG, Inc. and any use of such marks by
General Wireless Operations Inc. is under license.
05A16
Printed in
China
4000765
4000766
4000767
BOTTOM VIEW
DC IN
ConnecttheincludedUSB
charging cable here to charge.
AUX
For line-in listening option.
FRONT & TOP VIEW
º
Turnon/ospeaker
• Callfunctionsonspeakerphone
• ClearBluetoothpairing
ComplieswiththeEuropeanUnion’s“Restriction
of Hazardous Substances Directive,” which
protectstheenvironmentbyrestrictingspecic
hazardous materials and products.
True Wireless Activation
Makesureyourrstspeakerispairedandplayingmusic
from only one Bluetooth device, when using True Wireless
mode.
1. Switchonyourrstspeaker.ThenpressG and
simultaneously. TheLEDashesquicklyand you hear a
conrmationtone.
2. Switch on your second speaker and press G and
volume − simultaneously.TheLEDashesquickly,and
youhearaconrmationtone.
3. When True Wireless is successfully activated, the LEDs
light steadily on both your speakers, and both speakers
beep once simultaneously.
4. To swap left/right channel sound on your two speakers,
press G and − simultaneously.Dierencesinleft/right
sound may vary depending on how the music track was
originally recorded.
5. To exit True Wireless immediately and operate as 2
separate speakers, press G and + simultaneously on
either one of the speakers. A double beep sounds,
andmusiccontinuesplayingontherstspeakeronly.
Remembertoswitchothesecondspeakertosave
power.
Notes:
•Smart Power O: During True Wireless playback,
press Goneitherspeakertoswitchobothspeakers
simultaneously.
•Smart True Wireless: Once activated, True Wireless is
memorized by your speakers, even after you press G
and + to exit. True Wireless is the default playback mode
when you next switch on the two speakers.
•Troubleshooting TW Activation:Incaseofdiculty
activating,turnoeachspeaker.Thenswitchtherst
speaker on again, followed by the second speaker,
and start playing a song. Wait a few seconds to hear if
True Wireless has been activated. If not, repeat True
Wireless Activation and complete steps 1-3 above
within 3 minutes.
Connecting with AUX
For device players without Bluetooth functionality, use an
⅛"(3.5mm)audiocable(notincluded)toconnecttothe
speaker’s AUX jack.
Note: Bluetooth functionality is automatically deactivated
when AUX is connected.
Resetting the Speaker
In case the speaker's buttons are not functioning properly
during operation, press both + and − at the same time for 5
seconds to reset andswitcho the speaker. Any previous
TW activation will not be lost.
Handling and Care
Alwaysmakesuretherubberapsaresecurelytted
when not using the line in or charging jacks. This speaker is
designedtobewaterproofincompliancewithIEC60529
IPX6.Afterexposingtowater,cleanthespeakerwithasoft
dry cloth and leave to dry in a well-ventilated place away
from direct sunlight.
FCC Information
This equipment has been tested and found to comply with
thelimitsforaClassBdigitaldevice,pursuanttoPart15
oftheFCCRules.Theselimitsaredesignedtoprovide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is
To... Button Press
Turnon/ospeaker G...and hold
2 sec
Start Bluetooth pairing
...and hold
2 sec
ClearBluetoothpairing
Volume up/ down +/ −
...quickly, or
press and
hold
Calls
Answer/ end call ×1
Reject an incoming call ...and hold
2 sec
Switch to an incoming call
and end the current call
True Wireless (TW)
ActivateTWonrstspeaker G, −
...both
buttons at
same time
Activate TW on 2nd speaker G,
...both
buttons at
same time
Swap left/ right channel G, −...both
buttons at
same time
Deactivate True Wireless G, +
Controls Overview
LEDs
Blue in Bluetooth/ call mode:
• ashesquickly−pairing/incomingcall
• ashesslowly−Bluetoothdisconnected
• lightssteadily−connected;engagedincall.
Red: charging
+/−
Adjust volume
Mic
OR
no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turningtheequipmentoandon,theuserisencouragedto
try to correct the interference by one or more of the following
measures:
• Reorientorrelocatethereceivingantenna.
• Increasetheseparationbetweentheequipmentand
receiver.
• Connecttheequipmentintoanoutletonacircuitdierent
from that to which the receiver is connected.
• Consultyourdealeroranexperiencedradio/TVtechnician
for help.
Changesormodicationsnotexpresslyapprovedbytheparty
responsible for compliance could void the user’s authority to
operate the equipment.
ThisdevicecomplieswithPart15oftheFCCRules.Operationis
subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
1-Year Limited Warranty
Go to www.radioshack.com/help for details.
RadioShackCustomerRelations
300RadioShackCircle,FortWorth,TX76102
www.radioshack.com
4000765_6_7_UG_EN.indd 1-9 5/10/2016 3:01:42 PM

Navigation menu