TCT Mobile 404 LTE USB Modem/LTE AP User Manual rev 1

Download:
Mirror Download [FCC.gov]
Document ID	2028495
Application ID	EME1vb7xFIsmMiKibo/HbQ==
Document Description	user manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	9.83kB (122826 bits)
Date Submitted	2013-07-30 00:00:00
Date Available	2013-07-30 00:00:00
Creation Date	2013-07-30 15:28:38
Producing Software	Acrobat Distiller 9.3.2 (Windows)
Document Lastmod	2013-07-30 15:28:38
Document Title	Microsoft Word - user manual rev.1.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Administrator

Quick Start Guide
Welcome! This manual brief is the profile of your USB‐Modem, about the details of how to set the management
parameters, see help information on the web management page.
This product meets applicable national SAR limits of 2.0W/kg.
The specific maximum SAR values can be found in the following section of this user
guide.
When carrying the product or using it while worn on your body, either use an
www.sar‐tick.com
approved accessory such as a holster or otherwise maintain a distance of 5 mm
from the body to ensure compliance with RF exposure requirements. Note that the
product may be transmitting even if you are not making a phone call.
Getting to Know Your Modem
Number
Description
USB interface
SMS LED
Network LED
SIM/USIM Card Slot
Micro‐SD Card Slot
How to start your modem
1.
Remove the back cover.
2.
Insert the SIM/UMSIM card into card slot on back of modem.
3.
Insert the USB modem into computer’s USB port.
4.
When the installation is complete, the modem’s web management page is displayed, the modem connects
to the network automatically. The modem’s web management page will be displayed every time
automatically when the modem is inserted into the computer.
Note:

Do not remove the SIM/USIM card when the card is in use.

If the modem does not be installed automatically, find the AutoRun.exe (in windows OS) file in modem’s
root and double‐click it to run.

If the connection failed, access http://192.168.1.1 to check the status.

If you cannot access http://192.168.1.1, disconnect other network, remove the modem and re‐insert it, or
restart your computer.

Recommend to use the USB Y cable to ensure the power supply
LED Indicates
(Following table are listed the LED Indicates for each status.)
LED TYPE
Network LED
LED Indicator
Description (state)
Lilac Light constant for seconds
Power supply finished
Orange Light Fast Flashing(5Hz)
Network Searching
Constant Orange Light
Out of order
Red Light Slow Flashing (1Hz)
Registering into LTE Network
Constant Red Light
Registered to LTE Network
Green Light Slow Flashing (1Hz)
Registering into 3G network
Constant Green Light
Registered to 3G network
Blue Light Slow Flashing (1Hz)
Registering into 2G network
Constant Blue Light
Registered to 2G network
Blue Light Slow Flashing (Continuation 5 s)
Receive SMS
Blue Light close
No new received SMS
SMS LED
Safety and Use
We recommend that you read this chapter carefully before using the USB‐Modem. The manufacturer disclaims
any liability for damage, which may result as a consequence of improper use of the USB‐Modem or of use
contrary to the instructions contained herein.
Traffic Safety
When driving, do not use the USB‐Modem

When switched on, the USB‐Modem emits electromagnetic waves that can interfere with the vehicle’s
electronic systems such as ABS anti‐lock brakes or airbags. To ensure that there is no problem, do not place
the USB‐Modem on top of the dashboard or within an airbag deployment area.

Check with your car dealer or the car manufacturer to make sure that the dashboard is adequately shielded
from modem RF energy.
Conditions of Use

Switch the USB‐Modem off before boarding an aircraft.

Switch the USB‐Modem off when you are in health care facilities, except in designated areas. As with many
other types of equipment now in regular use, the USB‐Modem can interfere with other electrical or
electronic devices, or equipment‐using radio frequencies.

Switch the USB‐Modem off when you are near gas or flammable liquids. Strictly obey all signs and
instructions posted in a fuel depot, petrol station, chemical plant, or in any potentially explosive atmosphere.

When the USB‐Modem is switched on, it should be kept at least 15 cm from any medical device such as a
pacemaker, a hearing aid or insulin pump, etc.

Do not let children use the USB‐Modem without supervision.

When replacing the cover, please note that the USB‐Modem may contain substances that could create an
allergic reaction.

Always handle the USB‐Modem with care and keep it in a clean and dust‐free place.

Do not allow the USB‐Modem to be exposed to adverse weather or environmental conditions (moisture,
humidity, rain, infiltration of liquids, dust, sea air, etc). The manufacturer’s recommended operating
temperature range is ‐10°C to +50°C.

Do not open, dismantle or attempt to repair the USB‐Modem yourself.

Do not drop, throw or bend the USB‐Modem.

Do not paint it.
WEEE Approval
The USB‐Modem is in compliance with the essential requirements and other relevant provisions of the Waste
Electrical and Electronic Equipment Directive 2002/96/EC (WEEE Directive).
RoHs Approval
The USB‐Modem is in compliance with the restriction of the use of certain hazardous substances in electrical and
electronic equipment Directive 2002/95/EC (RoHs Directive).
Radio Waves
Proof of compliance with international standards (ICNIRP) or with European Directive 1999/5/EC (R&TTE) is
required of all modem models before they can be put on the market. The protection of the health and safety for
the user and any other person is an essential requirement of these standards or this directive.
THIS DEVICE MEETS INTERNATIONAL GUIDELINES FOR EXPOSURE TO RADIO WAVES.
The USB‐Modem is a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio
waves (radio frequency electromagnetic fields) recommended by international guidelines. The guidelines were
developed by an independent scientific organization (ICNIRP) and include a substantial safety margin designed to
assure the safety of all persons, regardless of age and health.
The radio wave exposure guidelines use a unit of measurement known as the Specific Absorption Rate, or SAR.
The SAR limit for mobile devices is 2 W/kg.
Tests for SAR are conducted using standard operating positions with the device transmitting at its highest certified
power level in all tested frequency bands. The highest SAR values under the ICNIRP guidelines for this device
model are:
Maximum SAR for this model and conditions under which
it was recorded.
Body‐worn SAR
0.931W/Kg
During use, the actual SAR values for this device are usually well below the values stated above. This is because,
for purposes of system efficiency and to minimize interference on the network, the operating power of your
mobile device is automatically decreased when full power is not needed for the call. The lower the power output
of the device, the lower its SAR value.
Body‐worn SAR testing has been carried out at a separation distance of 5mm. To meet RF exposure guidelines
during body‐worn operation, the device should be positioned at least this distance away from the body.
If you
are not using an approved accessory ensure that whatever product is used is free of any metal and that it
positions the phone the indicated distance away from the body.
The World Health Organization has stated that present scientific information does not indicate the need for any
special precautions for the use of mobile devices. They recommend that if you are interested in further reducing
your exposure then you can easily do so by limiting your usage or keep the device away from the head and body.
For more information you can go to www.alcatelonetouch.com
Additional information about electromagnetic fields and public health are available on the following site:
http://www.who.int/peh‐emf
The USB‐Modem is equipped with a built‐in antenna. For optimal operation, you should avoid touching it or
degrading it.
This equipment is in compliance with the essential requirements and other relevant provisions of Directive
1999/5/EC. The entire copy of the Declaration of Conformity for your telephone can be obtained through our
Website: www.alcatelonetouch.com
Address: Room 1910‐12A, Tower 3, China HK City, 33 Canton Road, Tsimshatsui, Kowloon, Hong Kong
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
‐ Reorient or relocate the receiving antenna.
‐ Increase the separation between the equipment and receiver.
‐Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
‐Consult the dealer or an experienced radio/TV technician for help

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : Administrator
Create Date                     : 2013:07:30 15:28:38+08:00
Modify Date                     : 2013:07:30 15:28:38+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Producer                        : Acrobat Distiller 9.3.2 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Format                          : application/pdf
Title                           : Microsoft Word - user manual rev.1.doc
Creator                         : Administrator
Document ID                     : uuid:a60246f9-d2bc-44e3-a708-2a0a4d3b0854
Instance ID                     : uuid:8d126b01-a070-4b96-ae9a-ef3a5116313b
Page Count                      : 6

EXIF Metadata provided by EXIF.tools