TCT Mobile 441 WiFi video system User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2140121
Application ID	N3w3013+KbDSDORCB/1XIw==
Document Description	user manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	15.75kB (196852 bits)
Date Submitted	2013-12-12 00:00:00
Date Available	2013-12-12 00:00:00
Creation Date	2013-12-04 17:13:28
Producing Software	Adobe PDF Library 9.0
Document Lastmod	2013-12-04 17:13:37
Document Title	user manual
Document Creator	Acrobat PDFMaker 9.1 Word 版
Document Author:	catherine.liu

ONE TOUCH V101
USER MANUAL
V101
About more help information and Frequently Asked
Question
please
browse
the
website
www.alcatelonetouch.com
CJA18K001AAA
Contents
1. YOUR DEVIDE ............................................... 3
What’s in the box .................................... 3
Appearance illustration ........................... 3
Installation ............................................... 4
2. QUICK START TO MIRROR .......................... 6
3. DISPLAY MEDIA FILES IN LNA ..................... 7
Install Software ....................................... 7
Set Wi-Fi network for your V101 ............. 7
Push media files to TV ............................ 8
4. UPGRADE ...................................................... 9
5. SAFETY AND USE ....................................... 11
PROTECT YOUR HEARING
To prevent possible hearing damage, do not
listen at high volume levels for long periods.
Exercise caution when holding your device
near your ear while the loud speaker is in
use.
1.
YOUR DEVIDE
What’s in the box
Appearance illustration
Indicator LED
The LED will light when V101 starts up.
Micro USB Port
Connect V101 to USB port of TV or
charger(5V, 1A) using an USB cable
HDMI Port
Connect V101 to the HDMI port of TV
using an HDMI cable
Key
Press the key when you need to debug
V101 after connected with PC
Installation
Connect HDMI Cable:
a) Connect one end of the HDMI cable to the
back/side of your TV;
b) Connect the other end of the cable to HDMI
port on the back of V101;
Connect USB Cable:
a) Connect one end standard USB port of the
USB cable to the back/side of your TV;
b) Connect the Micro USB port of the USB cable
to Micro port on the back of V101.
Install TV Link tool
a) Download TV Link tool from our web site
http://support.alcatelonetouch.com;
b) Cope TV Link tool to your mobile device then
install it;
c) Open TV Link tool on your mobile device;
d) Click “search” icon, seconds later choose
“V101_******” item to connect with V101, then
you can the menu UI as below, you can set
wireless network, upgrade, setting V101 and
so on.
Touch to set
Wi-Fi network
Touch
to
upgrade
Touch to adjust
display scale
Touch to change
language
Touch to choose
your region
Touch to see
V101’s info
Turn on your TV
Turn on your TV and set to the input source of
your TV as HDMI port which you plugged into
TV.
Tips: post magic tape
2.
QUICK START TO MIRROR
TV will display the main UI after V100 be
installed several seconds;
Set your mobile device
1. click “Setting” -> “Display” -> “wireless display”
-> “search”;
2. Please click “V101-****” item, then you can see
the connection status on the UI. Seconds later
you can see the screen of mobile device
display on the TV;
3. When you don’t use it please disconnect on the
mobile device follow below step: click “Setting”
-> “Display” -> “wireless display” -> “V101-****”,
choose “yes”, TV picture will return main UI
after 20 seconds.
Tips:
a) The mobile devices(smart phone or tablet)
connected with V101 should support
Miracast function;
b) Please unplug the USB port connected with
TV if you don’t use V101 for a long time in
order to avoid V101 too hot;
c) V101 can connect with mobile device one to
one only, so please disconnect the current
mobile device when you want to connect
with another mobile device;
d) The mobile device should be connect with
Wi-Fi network firstly then connect with V101,
otherwise mobile device maybe can’t access
internet.
3.
DISPLAY MEDIA FILES IN
LNA
Install Software
Search and install Skifta software from Google
Play.
Set Wi-Fi network for your V101
1. Open TV Link tool on your mobile device, click
“search” icon, seconds later choose
“V101_******” item to connect with V101, then
you can the menu UI as below:
2. Choose “Access Point”: set Wi-Fi network
SSID and password for V101, V101 will start to
connect Wi-Fi network after chick “connect”,
you can check connection info on TV.
Push media files to TV
1. Open Skifta on your mobile device, choose the
first item to enter the next UI, then choose a
media source on list;
2. Choose the second item to enter the next UI,
then choose a playback device on list;
3. Choose the third item to enter the next UI, then
choose a media file from your mobile device,
you can see the media file playing on TV and
also can control this file by mobile device.
4.
UPGRADE
1. Download new Firmware to your mobile device
(smart phone or tablet) from our web site
http://support.alcatelonetouch.com on “upgrade
your software” page, record storage directory of
new Firmware.
2. Open TV Link tool on your mobile device, click
“search” icon, seconds later choose
“V101_******” item to enter menu:
3. Click ”Upgrade” -> ”P2P Upgrade(Local)”,
browse new Firmware storage directory,
choose new Firmware then smart devices will
upload Firmware to V101, you can see
uploading process as below on smart devices
and TV;
5.
V101 will restart automatically to upgrade
SW in several minutes, you can see
upgrade process as below on TV. Don’t
power off in the meanwhile otherwise
V101 will be damaged!
5.
SAFETY AND USE
We recommend that you read this chapter
carefully before using the Wi-Fi display Dongle.
The manufacturer disclaims any liability for
damage, which may result as a consequence of
improper use of the Wi-Fi display Dongle or of
use contrary to the instructions contained herein.
 Traffic Safety
When driving, do not use the Wi-Fi display
Dongle.
When switched on, the Wi-Fi display Dongle
emits electromagnetic waves that can interfere
with the vehicle’s electronic systems such as
ABS anti-lock brakes or airbags. To ensure that
there is no problem:
- Do not place the Wi-Fi display Dongle on top
of the dashboard or within an airbag
deployment area.
- Check with your car dealer or the car
manufacturer to make sure that the
dashboard is adequately shielded from
Dongle RF energy.

Conditions of Use
- Switch the Wi-Fi display Dongle off before
boarding an aircraft.
- Switch the Wi-Fi display Dongle off when
you are in health care facilities, except in
designated areas. As with many other types
of equipment now in regular use, the Wi-Fi
display Dongle can interfere with other
electrical or electronic devices, or
equipment-using radio frequencies.
- Switch the Wi-Fi display Dongle off when
-
you are near gas or flammable liquids.
Strictly obey all signs and instructions
posted in a fuel depot, petrol station,
chemical plant, or in any potentially
explosive atmosphere.
When the Wi-Fi display Dongle is switched
on, it should be kept at least 15 cm from any
medical device such as a pacemaker, a
hearing aid or insulin pump, etc.
Do not let children use the Wi-Fi display
Dongle without supervision.
When replacing the cover, please note that
the Wi-Fi display Dongle may contain
substances that could create an allergic
reaction.
Always handle the Wi-Fi display Dongle with
care and keep it in a clean and dust-free
place.
Do not allow the Wi-Fi display Dongle to be
exposed
to
adverse
weather
or
environmental
conditions
(moisture,
humidity, rain, infiltration of liquids, dust, sea
air, etc). The manufacturer’s recommended
operating temperature range is -15°C to
+55°C.
Do not open, dismantle or attempt to repair
the Wi-Fi display Dongle yourself.
Do not drop, throw or bend the USB Dongle.
Do not paint it.
 WEEE Approval
The Wi-Fi display Dongle is in compliance with
the essential requirements and other relevant
provisions of the Waste Electrical and Electronic
Equipment
Directive
2002/96/EC
(WEEE
Directive).
 RoHs Approval
The Wi-Fi display Dongle is in compliance with
the restriction of the use of certain hazardous
substances in electrical and electronic equipment
Directive 2011/65/EU (RoHs Directive).
 Radio Waves
Proof of compliance with international standards
(ICNIRP) or with European Directive 1999/5/EC
(R&TTE) is required of all Dongle models before
they can be put on the market. The protection of
the health and safety for the user and any other
person is an essential requirement of these
standards or this directive.
THIS
DEVICE MEETS INTERNATIONAL
GUIDELINES FOR EXPOSURE TO RADIO
WAVES.
Your device is a radio transmitter and receiver. It
is designed not to exceed the limits for exposure
to radio waves (radio frequency electromagnetic
fields) recommended by international guidelines.
The guidelines were developed by an
independent scientific organization (ICNIRP) and
include a substantial safety margin designed to
assure the safety of all persons, regardless of
age and health.
The device is tested for typical body worn
operation. The minimum distance between the
user and/or any bystander and the radiating
structure of the transmitter is 20cm.
The World Health Organization has stated that
present scientific information does not indicate
the need for any special precautions for the use
of mobile devices. They recommend that if you
are interested in further reducing your exposure
then you can easily do so by limiting your usage
or keep the device away from the head and body.
The Wi-Fi Logo is a certification mark of the Wi-Fi
Alliance. Your device uses non-harmonized
frequency and is intended for use in all European
countries.
The WLAN can be operated in the EU without
restriction indoors, but cannot be operated
outdoors in France.
General Information
Internet address: www.alcatelonetouch.com
TCT Mobile Limited address: Room 1910-12A,
Tower 3, China HK City, 33 Canton Road,
Tsimshatsui, Kowloon, Hong Kong.
Hot Line Number: see “TCT Mobile Services”
leaflet or go to our website.
On our website, you will find our FAQ (Frequently
Asked Questions) section. You can also contact
us by e-mail to ask any questions you may have.
An electronic version of this user guide is
available in English and other languages
according to availability on our server:
www.alcatelonetouch.com
Your device is a transceiver that operates on
Wi-Fi with 2.4GHz GHz.
When using the product , maintain a distance of
20cm from the body to ensure compliance with R
F exposure requirements.Power is so low that no
RF exposure calculation is needed.
it is safe during normal use.
This device complies with part 15 of the FCC
rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
NOTE: The manufacturer is not responsible for
any radio or TV interference caused by
unauthorized modifications or changes to this
equipment. Such modifications or changes could
void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and
found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide
reasonable
protection
against
harmful
interference in a residential installation. This
equipment generates uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to
radio or television reception, which can be
determined by turning the equipment off and on,
the user is encouraged to try to correct the
interference by one or more of the following
measures:
‐ R eorient or relocate the receiving antenna.
‐ Increase the separation betw een the
equipment and receiver.
‐C onnect the equipm ent into an outlet on a
circuit different from that to which the
receiver is connected.
‐C onsult the dealer or an experienced radio/T V
technician for help.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : catherine.liu
Create Date                     : 2013:12:04 17:13:28+08:00
Modify Date                     : 2013:12:04 17:13:37+08:00
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Metadata Date                   : 2013:12:04 17:13:37+08:00
Creator Tool                    : Acrobat PDFMaker 9.1 Word 版
Document ID                     : uuid:3718c382-df95-4c81-9007-79eaf3004b8a
Instance ID                     : uuid:bd0f31cc-7adb-4628-b6f1-91c9abdd8b66
Subject                         : 232
Format                          : application/pdf
Creator                         : catherine.liu
Producer                        : Adobe PDF Library 9.0
Source Modified                 : D:20131204030726
Company                         : 
Page Layout                     : OneColumn
Page Count                      : 16

EXIF Metadata provided by EXIF.tools