TECH CAST MFG WVCMS10B201101 Digital Wireless Camera User Manual WVCMS10B V1 2

TECH-CAST MFG. CORP. Digital Wireless Camera WVCMS10B V1 2

User manual

Hex Socket Head M4 X 6LStainless screwsFlat washer 4.5 X 9.5 X 1mm StainlessTapping P/H w/washer 5 X 16mm StainlessAllen Specifications6641Q’tyCamera to bracket hardwareScrew For UseInstallationHex Socket Head M4 X 6L Stainless screwsFlat Washers 4.5x9.5x1mm StainlessAllen wrench WVCMS10B - DIGITAL WIRELESS COLOR CMOS CAMERAWVCMS10B Features: Digital Wireless TechnologyHigh Performance CMOS SensorIR LED low Light EnhancementWaterproof (IPX6)Wide View AngleIntegrated Audio MicrophoneAntenna VerticalRecommended grommet HoleØ.63Ø1.77Ø.242-PLCS.28°TYP.3.233.113.2281.851.50.75Bracket Mtg.Hole DimensionsUnit : Inch Ø.98Ø.20.12.79.35Ø 0.75”Washer 37.5 X 5 X 0.5mmPPSpecifications Q’ty2Contents:CameraBracketHardware KitInstallation and Pin Out:SpecificationsMounting TypeImage sensorExternal type1/3” CMOS cameraResolution 320 TV linesWater resistance IPX692(W) X 76(H) X 83(D)mm3.6(W) X 3.7(H) X 3.3(D)Inch View angleDimensionWorking temperature93°(H), 66°(V), 117°(D) -20°C ~ +65°CWeight Approx. 0.79kg / 1.74lbsMin illumination 1.0 Lux at F2.00 Lux with IR onCable Connector End ViewMicrophoneLED AssistedIlluminationArrow Locking LocationNo connection No connection12V DCGround/ShieldGrommet To Seal Through Vehicle ExteriorPAIRWaterproof Camera ConnectorAntenna VerticalStandard Cable ConnectorRed12V DCGround/ShieldBlackModel: WVCMS10BFCC ID : ZCPWVCMS10B201101This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Notice: The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.Important Note: To comply with the FCC RF exposure compliance requirements, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. No change to the antenna or the device is permitted. Any change to the antenna or the device could result in the device exceeding the RF exposure requirements and void user’s authority to operate the device. Core

Navigation menu