TECNO MOBILE T349R Mobile Phone User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3833099
Application ID	ZSMXAVDNjxEuOTsERe792w==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	4.62kB (57707 bits)
Date Submitted	2018-04-28 00:00:00
Date Available	2018-04-28 00:00:00
Creation Date	2018-04-26 13:53:16
Producing Software	PDFCreator 2.4.1.13
Document Lastmod	2018-04-26 13:53:16
Document Title	18070335 T349R DL181R 认证说明书20180324
Document Creator	PDFCreator 2.4.1.13
Document Author:	lily2yang

User Manual
Mobile Phone
Model: T349R
Hereby,TECNO MOBILE LIMITED
declares that this Mobile Phone is in
compliance with the essential requirements and
other relevant provisions of Directive
2014/53/EU.
1. Basic Information
1.1. Brief Introduction
Thanks for selecting this phone.
Through reading the manual, you can fully know the basic functions of the mobile phone and
some precautions during use.
This phone provides many kinds of practical functions, such as name card holder, scene
mode, message, audio and video player, camera and video, alarm clock, calculator and etc. so that
convenient for your work and leisure activities. In addition, this phone adopts personalized
human-computer interface design, its complete function can meet your different requirements.
The company reserves the rights to revise the contents of the manual without prior notice.
2. Before Use
2.1. Install SIM Card and Memory Card
2.1.1 SIM Card
Before using the phone, you must insert valid SIM (Subscriber Identity Module) card in the
phone. SIM card is provided by network supplier.
In order to avoid losing or damaging the information saves in SIM card, please don’t touch
the metal contact surface, and place SIM card in the place that away from electricity and magnetic
force. Once SIM card is damaged, you can’t use the phone normally.
Prompt: Please make sure to power off the phone before taking out SIM card. It is absolutely
forbidden to insert or take out SIM card with external power supply; otherwise it may damage
SIM card and the phone.
2.1.2 Memory Card
Due to the limited size of mobile phone storage, we recommend that you insert an external
memory card. You will be able to better experience the camera, video, music, recording and other
functions.
Prompt: If the memory card is failed, please check whether it is correctly placed and good
contact of metal point.
2.2. Battery
2.2.1 Charging
Insert the charger on the charging interface.
When electric quantity is too low, the phone will power off automatically. Please don’t make
the battery in the status of not enough electric quantity for a long time; otherwise it may damage
the battery quality and service life. Please don’t charge the battery for a long time.
Prompt: In order to ensure normal operation of the phone, please make sure to use the
designated charger.
2.2.2 Battery safety
Do not place the battery in fire; follow local laws and ordinances in disposing used battery.
Check the model number of the charger before using it to charge the mobile.
Only use approved battery, charger and accessories applicable to the specific mobile model.
Using other types of battery, charger and accessories may violate the certification or warranty
terms of the equipment and may result in danger.”
Return waste and used batteries to the supplier or specified recovery site.
CAUTION!
Risk of explosion if an incorrect type replaces battery.
3.
E-waste/Recycle your phone
You are liable to dispose of all your electronic or electrical waste equipment by relocating
over to the specified collection point for recycling of such hazardous waste.
Collection and proper recovery of your electronic waste equipment’s at the time of disposal
will allow us to help preserve the environment. Recycling of the electronic waste equipment will
ensure safety of human health and environment.
3.1 Instructions for disposal of products
a) At the end of their life, should drop used electronic products, batteries, and packaging
materials in the nearest disposed products cans or collection center
b) Should divide the packaging materials according to corresponding waste disposal options
and sort for recycling.
c) Battery should be removed from the product for recycling.
3.2 Prohibition for disposal of equipment
a) Never dump E-wastes in garbage bins or municipal solid waste stream.
3.3 Information on the consequences of improper handling, accidental breakage damage and
improper recycling of the end of life product.
a) If batteries are not properly disposed of, it can cause harm to human health or the
environment.
b) If the battery terminals are in contact with metal objects, it may cause a fire.
4. Care and Maintenance
Maintenance of battery
•Your device is powered by a rechargeable battery. It is necessary to have the battery charged
when it is going to wear out. To prolong battery life, new battery need to run out of power for the
first charge.
•Unplug the charger from the electrical plug and the device when not in use. Do not leave
fully a charged battery connected to a charger over a week, since overcharging may shorten its
lifetime.
•Do not expose your phone to extreme temperatures lower than 0°C and higher than 45°C.
•Temperature tends to affect the limit of battery to be charged. Therefore, it is necessary for
the battery to be cooled or warmed before it is charged. Stop charging when battery is higher than
55℃ or below 0℃, and restore charging when below 50℃ or higher than 5℃.
•Use the battery only for its intended purpose and avoid short-circuiting. Accidental
short-circuiting can occur when a metallic object causes direct connection of the positive (+) and
negative (-) terminals of the battery.
•Do not use damaged battery.
•Leave the battery in hot or cold places will reduce the capacity and lifetime of the battery. A
device with a hot or cold battery may not work temporarily, even when the battery is fully
charged.
•Do not dispose of batteries in a fire as they may explode. Dispose of batteries according to
local regulations.
Care of maintenance of your device
The suggestions below will help you protect your warranty coverage.
•Keep the device and accessories out of the reach of small children.
•Keep the device dry. All types of liquids or moisture will corrode electronic circuits.
•Do not store the device in hot areas. High temperatures can shorten the life of electronic
devices and warp or melt certain plastics.
•Do not attempt to open the device other than as instructed in this guide. Non-professional
handling may damage the device.
•Do not use harsh chemicals or strong detergents to clean the device.
•Use only the supplied or an approved replacement attachments, for the unauthorized ones
could invalidate the warranty of maintenance.
5. Additional Safety Information
Remember to follow any special regulations in force and use the device only in its normal
operation positions.
Traffic Safety
•Unless there is an emergency, otherwise do not use the device when you are driving a
vehicle without safety wireless equipment. Please park the vehicle in a safe place before you use
the device in order to guarantee that you pay all attention to drive. Observe related regulations.
•In case there is no adequate protection, certain electronic systems of the vehicle may be
affected by the electric wave of the device.
•You are suggested to use the device only in vehicles with antenna.
•Only qualified personnel should install the device in a vehicle.
Aircraft Safety
Switch off your device before boarding an aircraft. The use of wireless teledevices in an
aircraft may be dangerous to the operation of the aircraft, disrupt the wireless telephone network,
and may be illegal. The GSM service will be unavailable. When you are in flying aircraft, using
your device is prohibited.
Environment Safety
•Remember to follow any special regulations in force in any area, and always switch off your
device when its use is prohibited or when it may cause interference or danger.
•Operation of any radio transmitting equipment, including wireless phones, may interfere
with the functionality of inadequately protected medical devices. Consult a physician or the
manufacture of the medical device to determine if you have any questions.
•Your device may interfere with some hearing aids, pacemakers and other medical devices.
Please obey the suggestions provided by physicians or medical device manufacturers.
•You are suggested to switch off the device in any area with potentially explosive atmosphere,
such as gas station, chemical factories etc.
•Observe restrictions on the use of radio equipment.
Note：The socket-outlet shall be installed near the equipment and shall be easily accessible.
6.
SAR
Specific Absorption Rate (SAR) Certification
THIS DEVICE MEETS INTERNATIONAL GUIDELINES FOR EXPOSURE TO
RADIO WAVES
Your mobile device is a radio transmitter and receiver. It is designed not to exceed the limits
for exposure to radio waves (radio frequency electromagnetic fields) recommended by international
guidelines. The guidelines were developed by an independent scientific organization (ICNIRP) and
include a substantial safety margin designed to assure the safety of all persons, regardless of age
and health.
The radio wave exposure guidelines use a unit of measurement known as the Specific
Absorption Rate, or SAR. The SAR limit for mobile devices is 1.6 W/kg. Tests for SAR are
conducted using standard operating positions with the device transmitting at its highest certified
power level in all tested frequency bands. The highest SAR values under the ICNIRP guidelines for
this device model are:
Maximum SAR for this model and conditions under which it was recorded.
Head
1.19 W/Kg
Body
1.00 W/Kg
During use, the actual SAR values for this device are usually well below the values stated
above. This is because, for purposes of system efficiency and to minimize interference on the
network, the operating power of your mobile device is automatically decreased when full power is
not needed for the call. The lower the power output of the device, the lower its SAR value.
A body-worn SAR test has been performed on this device at a separation distance of 15 mm.
To meet RF exposure guidelines during body-worn operation, the device must be positioned at least
15 mm away from the body.
Organizations such as the World Health Organization and the US Food and Drug
Administration have suggested that if people are concerned and want to reduce their exposure, they
could use a hands-free accessory to keep the wireless device away from the head and body during
use, or reduce the amount of time spent using the device.
7.
CAUTION
SAR tests are conducted using standard operating positions accepted by the FCC with the
phone transmitting at its highest certified power level in all tested frequency bands, although the
SAR is determined at the highest certified power level, the actual SAR level of the phone while
operating can be well below the maximum value, in general, the closer you are to a wireless base
station antenna, the lower the power output.
Before a new model phone is a available for sale to the public, it must be tested and certified
to the FCC that it does not exceed the exposure limit established by the FCC, Tests for each phone
are performed in positions and locations (e.g. at the ear and worn on the body)as required by the
FCC.
FCC ID: 2ADYY-T349R
For body worn operation, this model phone has been tested and meets the FCC RF exposure
guidelines when used with an accessory designated for this product or when used with an accessory
that
Contains no metal and that positions the handset a minimum of 1.5 cm from the body.
Non-compliance with the above restrictions may result in violation of RF exposure guidelines.
Labelling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to the condition that
this device does not cause harmful interference
Information to user.
Any Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
Information to the user.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates uses
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.
Body-worn Operation
This device was tested for typical body-worn operations. To comply with RF exposure
requirements, a minimum separation distance of 1.5 cm must be maintained between the user’s
body and the handset, including the antenna. Third-party belt-clips, holsters, and similar
accessories used by this device should not contain any metallic components. Body-worn
accessories that do not meet these requirements may not comply with RF exposure requirements
and should be avoided. Use only the supplied or an approved antenna.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Create Date                     : 2018:04:26 13:53:16+08:00
Modify Date                     : 2018:04:26 13:53:16+08:00
Author                          : lily2yang
Subject                         : 
Page Count                      : 6
Page Layout                     : SinglePage
Page Mode                       : UseNone
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:9cfe2ff3-4b71-11e8-0000-dcb18035a7bb
Producer                        : PDFCreator 2.4.1.13
Keywords                        : 
Creator Tool                    : PDFCreator 2.4.1.13
Document ID                     : uuid:9cfe2ff3-4b71-11e8-0000-dcb18035a7bb
Format                          : application/pdf
Title                           : 18070335 T349R DL181R 认证说明书20180324
Creator                         : lily2yang
Description                     : 

EXIF Metadata provided by EXIF.tools