TENDA TECHNOLOGY A9 Wireless N300 Universal Range Extender User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3071832
Application ID	GtMYT9BOusc8JXe4AIgZDQ==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	474.08kB (5926019 bits)
Date Submitted	2016-07-21 00:00:00
Date Available	2016-07-21 00:00:00
Creation Date	2016-07-13 08:47:41
Producing Software	Corel PDF Engine Version 15.2.0.686
Document Lastmod	2016-07-13 08:47:41
Document Title	A9V1.0-TDE01安装指南(可编辑）02
Document Creator	CorelDRAW X5
Document Author:	user

LED
Red
Solid: The device is starting
Blinking Slowly: The device is negotiating with a router/AP
Detecting signal with auto-extending feature (hasn't developed yet)
Blinking quickly: The device is performing WPS negotiation to a router/AP
Green
Solid: Extended successfully, the WiFi signal is strong
Install Guide
Option 2:
Use WPS Button to Extender Your WiFi
Plug the extender (A9) into an electrical outlet near your wireless router
(with WPS enabled).
Press the WPS button on your router, and then (within 2 minutes) press the
on the extender.
button
Orange
Solid: Extended successfully, the WiFi signal is poor
Blinking: Extended successfully, the WiFi signal is very poor
Wireless N300 Universal Range Extender
Model: A9
Button
Use the end of a paper clip or a similar object to press and hold this button for
about 8 seconds, and then release it to restore the extender to factory settings.
RST
Press
The LED indicator on the extender
will be solid red when it is starting;
and then starts blinking indicating
successful start.
Press this button and then (within 2 minutes) press WPS button on a router/AP
to establish a WPS connection.
Option 1:
Use Web Browser to Extender Your WiFi
Relocate the extender to other electrical outlet. Observe the LED indicator on the
extender to choose an optimum extended location for best WiFi performance.
When the LED indicator turns to solid green,
it indicates that a successful WPS connection
has been established.
Enjoy your WiFi! The extender's WiFi name and password are the same as those of your
router.
Internet
Poor Signal
Plug the extender (A9) into an electrical outlet near
your wireless router.
Use your computer to search and connect to the extender's
WiFi. The default WiFi (SSID: Tenda_XXXXXX) is on the
product label on the extender's back panel.
Select the WiFi name (SSID) you want to extend, and click
Next.
Blinking Orange
Solid Orange
Solid Green
www.tendacn.com
Made in China
Wireless N300 Universal Range Extender
Model: A9
Default Access: re.tenda.cn
Power: AC100-240V 0.3A 50/60Hz
MAC: C83A35XXXXXX
Please select a WiFi name…
FCC ID:V7TA9
IC:9034A-A9
Select
SSID: Tenda_XXXXXX
WiFi Name
Encryption/Signal Strength
Tenda_office
Enter the WiFi password of the selected WiFi name
(if any), and click Finish.
Keep moving the extender to outlets
closer to the router until the LED indicator
on the extender lights solid green.
Tenda_ceshi
Launch a web browser, type the default login domain name
re.tenda.cn or default login IP address 192.168.0.254 into
the address bar, and tap Enter on the keyboard.
Tenda_ssid
Tenda_1EEFD8
Next
The device is performing extending process.
Wait for a moment.
Extended successfully.
Position the antennas as shown in the figure below for best WiFi performance.
FAQ
Be vertical to the ground
After extending
1.Use your computer to connect to the extended WiFi name (if you customize the WiFi name of the
extender, connect that);
2.Launch a web browser, type re.tenda.cn into the address bar and tap Enter on the keyboard.
Base Station WiFi Name: Tenda_666666
........
Wall Outlet
Power Strip
Set up the extender's WiFi name and
password to the same as those of the Base
Station
Q2: What should I do if my router has no WPS button?
Extending…Please wait…
Back
A2: Folow Option 1: Use Web Browser to Extend Your WiFi to set up the extender.
Extended Successfully!
The WiFi name of the extender is changed into
Tenda_666666, Please connect again.
Finish
CE Mark Warning
This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user
may be required to take adequate measures.
NOTE: (1) The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications
to this equipment. (2) To avoid unnecessary radiation interference, it is recommended to use a shielded RJ45 cable.
Tips If you don't want to set up the extender's WiFi name and password to the same as those
of the selected WiFi name, uncheck the option before Set up the extender's WiFi name
and password to the same as those of the Base Station , customize the extender's
WiFi name and password, and then click Finish.
Relocate the extender to other electrical outlet. Observe the LED indicator on the
extender to choose an optimum extended location for best WiFi performance.
Declaration of Conformity
Enjoy your WiFi! The extender's WiFi name and password are the same as those of your
router.
Internet
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance 20cm between the radiator & your body.
NOTE: (1) The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications
to this equipment. (2) To avoid unnecessary radiation interference, it is recommended to use a shielded RJ45 cable.
IC RSS warning
Industry Canada(RSS-Gen Issue 4)
Hereby, SHENZHEN TENDA TECHNOLOGY CO., LTD., declares that the radio equipment type A9 is in compliance with
Directive 2014/53/EU.
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions:
(1) This device may not cause interference; and
The full text of the EU declaration of conformity is available at the following internet address:
http://www.tendacn.com/en/service/page/ce.htm l
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
Operate Frequency：2412-2472 MHz
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio
EIRP Power(Max.)：19.5 dBm
Software Version：V12.01.01.09
exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :
Poor Signal
Blinking Orange
Q1: I cannot log in to the extender's User Interface, what should I do?
A1:
Before extending
1.Use your computer to connect to the WiFi name (SSID) on the label of the extender's back panel;
2.Launch a web browser, type 192.168.0.254 or re.tenda.cn into the address bar and tap Enter on
the keyboard.
Select WiFi Name > Enter Password
√
WiFi Name: Tenda_666666
WiFi Password: 00000000
Tips 1. You can also log in to the extender's web UI to check the WiFi signal strength
(40%~79% is the optimum extending location).
2. Keep the extender away from Bluetooth devices, microwave, refrigerator, etc.
to minimize signal interference.
New Tab
re.tenda.cn
Recommended
extending location
Tenda_666666
S/N:
The LED indicator on the extender
will be solid red when it is starting;
and then starts blinking indicating
successful start.
WiFi Name: Tenda_666666
WiFi Password: 00000000
Select WiFi Name > Enter Password
Solid Orange
Solid Green
(1) l’appareil ne doit pas produire de brouillage;
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must accept any interference received, including interference
that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can bedetermined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver
WiFi Name: Tenda_666666
WiFi Password: 00000000
Recommended
extending location
Keep moving the extender to outlets
closer to the router until the LED indicator
on the extender lights solid green.
Tips 1. You can also log in to the extender's web UI to check the WiFi signal strength
(40%~79% is the optimum extending location).
2. Keep the extender away from Bluetooth devices, microwave, refrigerator, etc.
to minimize signal interference.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
WiFi Name: Tenda_666666
WiFi Password: 00000000
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate this equipment .
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications
to this equipment.
Radiation Exposure Statement
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible
d’en compromettre le fonctionnement.
The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS102 RF exposure, users can obtain Canadian information on RF exposure and compliance.
Le dispositif rencontre l’exemption des limites courantes d’évaluation dans la section 2.5 de RSS 102 et la conformité à
l’exposition de RSS-102 rf, utilisateurs peut obtenir l’information canadienne sur l’exposition et la conformité de rf.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This
equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your
body.
Cet émetteur ne doit pas être Co-placé ou ne fonctionnant en même temps qu'aucune autre antenne ou émetteur. Cet
équipement devrait être installé et actionné avec une distance minimum de 20 centimètres entre le radiateur et votre
corps
Technical Support
HongKong Hotline: 00852-81931998
United States Hotline: 1-800-570-5892
Canada Hotline: 1-888-998-8966
Website: http:// www.tendacn.com E-mail: support@tenda.com.cn
Skype: Tendasz
Copyright
© 2016 Shenzhen Tenda Technology Co., Ltd. All rights reserved.
Tenda is a registered trademark legally held by Shenzhen Tenda Technology Co., Ltd. Other brand and product names
mentioned herein are trademarks or registered trademarks of their respective holders. Specifications are subject to
change without notice.
Address Info: 6-8 Floor, Tower E3, NO.1001, Zhongshanyuan Road, Nanshan District, Shenzhen, China. 518052

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Profile CMM Type                : Lino
Profile Version                 : 2.1.0
Profile Class                   : Display Device Profile
Color Space Data                : RGB
Profile Connection Space        : XYZ
Profile Date Time               : 1998:02:09 06:49:00
Profile File Signature          : acsp
Primary Platform                : Microsoft Corporation
CMM Flags                       : Not Embedded, Independent
Device Manufacturer             : IEC
Device Model                    : sRGB
Device Attributes               : Reflective, Glossy, Positive, Color
Rendering Intent                : Perceptual
Connection Space Illuminant     : 0.9642 1 0.82491
Profile Creator                 : HP
Profile ID                      : 0
Profile Copyright               : Copyright (c) 1998 Hewlett-Packard Company
Profile Description             : sRGB IEC61966-2.1
Media White Point               : 0.95045 1 1.08905
Media Black Point               : 0 0 0
Red Matrix Column               : 0.43607 0.22249 0.01392
Green Matrix Column             : 0.38515 0.71687 0.09708
Blue Matrix Column              : 0.14307 0.06061 0.7141
Device Mfg Desc                 : IEC http://www.iec.ch
Device Model Desc               : IEC 61966-2.1 Default RGB colour space - sRGB
Viewing Cond Desc               : Reference Viewing Condition in IEC61966-2.1
Viewing Cond Illuminant         : 19.6445 20.3718 16.8089
Viewing Cond Surround           : 3.92889 4.07439 3.36179
Viewing Cond Illuminant Type    : D50
Luminance                       : 76.03647 80 87.12462
Measurement Observer            : CIE 1931
Measurement Backing             : 0 0 0
Measurement Geometry            : Unknown
Measurement Flare               : 0.999%
Measurement Illuminant          : D65
Technology                      : Cathode Ray Tube Display
Red Tone Reproduction Curve     : (Binary data 2060 bytes, use -b option to extract)
Green Tone Reproduction Curve   : (Binary data 2060 bytes, use -b option to extract)
Blue Tone Reproduction Curve    : (Binary data 2060 bytes, use -b option to extract)
Page Count                      : 1
Create Date                     : 2016:07:13 08:47:41+08:00
Modify Date                     : 2016:07:13 08:47:41+08:00
Producer                        : Corel PDF Engine Version 15.2.0.686
Author                          : user
Creator                         : CorelDRAW X5
Title                           : A9V1.0-TDE01安装指南(可编辑）02

EXIF Metadata provided by EXIF.tools