TENDA TECHNOLOGY AC9V3 AC1200 Smart Dual-Band Gigabit WiFi Router User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3729000
Application ID	Gy3XfSD/licK0J5lyDHNTw==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	406.84kB (5085553 bits)
Date Submitted	2018-01-25 00:00:00
Date Available	2018-01-25 00:00:00
Creation Date	2018-01-19 15:16:47
Producing Software	Adobe Acrobat Pro 11.0.1 Paper Capture Plug-in
Document Lastmod	2018-01-22 18:57:46
Document Title	User manual
Document Creator	Adobe Acrobat 11.0

Tenda ii libertarian
ihdhdhiti
l02.50 mm
l43.50 mm
287.00 mm
Tenda
Quick Installation Guide
For product or function details, please go to www.tendacn.com to
download the user guide.
Acrzoo Smart DuaicBand GlgabitWiEi Router
ModeleC9
Package Contents
WiFi router xi
Removable stand x |
Poweradapter x l
Ethernet cable x t Smmdwmm
ouick installation guide xl renaavnnkpaargei
ltmfiwvlelerar
Awstme.
if any item ismissing or damaged, please keep the original package and contact the local reselleror
distributor immediately
3 Set up the new router
l.5tart a web browser on a device that has been connected to the router. Enter
tendawmcom or i92.|68.0.i in the address bar, and press Enter.
2,Click Start.
(swim
Tenda
Tenda Router
Quick Setup Wizard
Tip lfrhe rollouving page does not appear, referro m in no
1 Install the new router
llyou want to replace youroriginal routerwhich is connected to the internet
with a PPPoE user name and password, start from Step i. Otherwise, stan
from Step 2.
(Optional) Step 1: Migrate your PPPoE user name
and password from your original router
4 Poirot
tn lglnal router
Elhemel cable
i.Power on your original and new routers,
2.Connectthe WAN port ofthe original router to port i, ,3 or 4/IPTV ofthe new
router using an Ethernet cable.
3.Afterm El 1? mthe and filndl’cators ofthe new router light solid on for 3
seconds after fast blinking, remove the original router
1 We take PPPoE connection typeasan example here. llthe ISP User Nameand
Password are populated. click Next, Otherwise. set them as required, and click Next,
Please select your connection type.
As derecred. yourconnection type may be ppm
Connectionrype: pppat
ISP user Name
lsP Password. in i
import PPPoE user name and password from
the original router.
in
' *Attach the removable stand
Align the removable stand with the slot on the bottom ofthe router, and then press
i it intotherouter
influlllliillllllmiflmliiil iii
Ethernet cable
i, Power oftyour modern, and remove its battery hf any),
2. Connect the modem to tneWAN port of the router using an Ethernet (able.
3, Power on the modem and router, and reinstall the battery.
3. Change the SSiD and win password as needed, and set your login password.‘ihen
click Next
Note The win password is used to connect to theWiFl network ofthe router, and the
login password is used to log in to the web UI of the router.
WiFi Settings
3 Set therrl password as the loqln password olrheadmln
account.
B y,,,
mm acquired
Note:The WiFi password is used to connect to the WiFi
network and the login password is used to log in to the web
UI ofthe router.
2 Connect your devices to the router
Connect your wireless devices
connect your wireless device to theWiFi network ofthe router using the
default SSiD (WiFi network name) and password on the back panel of
the router.
Connect your wired devlces
Connect your wired devices to port i, 2, 3 or 4/lPTv ofthe router using
Ethernet cables.
Connected,
4 Reconnect your WlFl devices to the WiFi network ofthe router using the SSIDS shown on
the page and thewiEi password you set.
Vou‘re all Set! You can now connect to
to change settingsolother leatures. click the“More"buttan below
More
Tip: ifthe internet is inaccessible arteryout conficluration, please refer to 02 in FAQ,
LED Indicators
Ports and Buttons
CE
CE MarkWarning
This is a Class a product. In a domestic environment, this product may cause radio
interference, in which case the user may be required to take adequate measures.
Operations in the 5.15525 GHz band are restricted to indoor use only.
This equipment should be installed and operated with minimum distance 10 cm
between the radiator is. your body.
The mains plug is used as disconnect device, the disconnect device shall remain
readily operable.
NOTE: (i ) The manufacturer is not responsible for any radio orTV interference caused
by unauthorized modifications to this equipment. (2) To avoid unnecessary radiation
interference. it is recommended to use a shielded lms cable,
- RECYCLING
This product bears the selective sorting symbol forWaste electrical and electronic
equipment (WEEE),ThiSmeanSthatthlS productmust be handled pursuantto
European directive ZOl Z/i eru in order to be recycled or dismantled to minimize its
impact on the environment
User has the choice to give his product to a competent recycling organization or to
the retailerwhen he buys new electrical or electronic equipment,
Operating Temperature: 0 "c . 40 “c
Operating Humidity: (lo - 90l% RH, nonccorldenslng
LED .
| n on ‘ “ o r status Dosalp on Port/Button Descrlptlon
. - Therouteris starting, Power Used to connect tothe included poweradapter.
Solid on .
{l} - Therouteristaultyafterstartup.
. . . . Used to enabletheWPsfunction ofthe router. PresstheWPS
Elmk'“ Thesym’““wmkmgpmpy'y' WPS button on the router,then presstheWPsbuttonofthedevice
50m, 0" Thu/{N ponisconnmed proper,” to be paired withinzminutestoestablishawps connection.
mm 5. m “WW Dam is being "WWW“ Mime LAN W“ WiFi Used to enable/disablethe WiFi networkoftherouter,
ff The LAN portisdisconnected orconnected .
0 impmpsw Rem Holdthe button downforabout l second.Therouteris reset
successfullywhen all tED indicators blinkonce.
Solid on TheWAN portisconnected properly.
WAN Used roconnectrhis routerrothe internet,
Blinking Data istransmitting overtneWAN port.
. . They are LAN ports used to connect to wired devices such as
0” TheWAN portisdisconnected orconnected 1/2/3 mmpm’swswmhes_
improperly.
. Alieamhe“GHNQGHIWipimwmkis aydefault, itisa LAN port, lfthelPvaunction ofthe routeris
Solid 0" “my“; 4/IPTV enabled, itonlyfunctionsas anIPTV portused toconnecttoa
setctop box.
a Fast blinking Data istransmitting wirelesSIy.
slowblinking The routerlsperlorrnlrlgWPSnegotiation. ”SE ”Se“‘°‘°“"“"“p°”ab'e ”55 flew“
off The WiFi networkofthe routerisdisabled.
. AUSBdeviceisconnectedtotheUSB port
Solid on
properly.
e. blinking Data istransmitting overtheUSBport.
off TheUSBportiS disconnected orconnected
improperly.
Declaration of Conformity
Hereby. SHENZHEN TENDATECHNOLOGY CO, LTD, declares that the radio
equipmenttype Acs is in compliance With Directive zaiA/SarEU,
The full text ofthe EU declaration of conformity iS available attire following internet
address: http://www.tendacn.com/en/servlce/download—(ataci Oi Jitml
Operate Frequency-
2.4 GHz: EU/ 240044835 MHZ
S GHZ:EU/5i50c5150 MHz
ElRP PowerlMax,)
2.4 GHz’ 9.6 dBrri
5 GHZ: 22.5 dBm
Soltware Version Vl5.03 06
ACE caution
Adapter Model: BN037cAi BUllE/ BN037VA|80|ZB
Manufacture: SHENZHEN HEWEISHUN NETWORK TECHNOLOGY Co,, LTD.
input iOO — 240 V AC 50/60 Hz 0.6 A
Output uc lzv |.5 A
,—: DC voltage
FCC Statement
This equipment has been tested and found to complywrth the limits fora Class bdigital
device. pursuant to Part iS ofthe FCC Pules,These limits are designed to provide
reasonable protection against harmful interference in a residential installationThis
equipment generates. uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. however, there is no guarantee that interference Will not occur in a
particular installation llthis equipmentdoes cause harmful interference to radio or
television reception, which can be determined by turning the equipment offand on,
the user is encouraged to try to correct the interference by one or more ofthe following
measures
FAQ
01: lf l cannot log in to the web Ul of the router using tendawificom, what should I
do?
AlzTrythe following solutions and log in agaln:
rcnsuie that the Ethernet cable with internet connectivity is connected to the WAN port
of the router. instead of port i, 2. 3 or A/IPTV
rcnsuie that your device is connected to the router's WiFi network or port i, z, 3 or
A/iPTV properly, For detailed connection instructions, referto Step 1,The default SSID
and password are specified on the product label.
Ensure that the domain name itendavvificom) you entered in the address bar of a web
hrowseris correct.
7Log in again using anotherweb browser
7Hold the Reset button down for about i second until all LEDs blink once to reset the
router.
oz: if I cannot access the internet afterconnguratlon, what should ldoi
A2: Log in to the web Ui ofthe router and check lnternet Status,
lfrhe router is connected to the internet successfully. try the following solutions
7Connect your wired devices to ports i,z, a or 4/IPTV
7Corinect your wireless devices to the WiFi network of the router. lfyou have changed
the SSID or password, use the new SSiD and password you set to connect yourwneless
devices to the win network
lfrhe router is disconnected from the internet, try the following solutions:
rcnsuie that the connection type you selected and the internet parameters you entered
are correct.
7Corinect the Ethernet cable with internet connectivity to your computer and check
whether your computer can access the internet if it does, reconnect the Ethernet cable
to the WAN port ofthe router, reset the routerand perform the procedure in Set upthe
new routeragaln,0therwise, contact your iSPforhelp.
Reorlent or relocate the receiinng antenna.
lncreasethe separation between the equipmentand receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radlo/TV technician for help.
This device is restricted to be used in the indoor
Thisdevicecomplieswith Part is ofthe FCC Pules,0perarion is subject to thefollowmg
two conditions: (1) this device may not cause harmful interference, and at this device
must accept any interference received, including interference that may cause undesired
operation,
Radlatlon Exposure Statement
This device complies with Ecc radiation exposure limits set forth for an uncontrolled
enirironmentand it also complies with Part is ofthe FCC RF Pules.
This equipment should be installed and operated with minimum distance 20cm
between the radiator is your body.
Caution:
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment
This transmitter must not be co—Iocated or operating in conjunction with any other
antenna ortransmlttef,
NOTE: (i ) The manufacturer is not responsible for any radlo orTV interference caused
by unauthorized modifications to this equipment. (1) To avoid unnecessary radiation
interference. it is recommended to use a shielded was cable,
BE 86 (2 on or [E i[ [L ES FR HR lr (V W
LT LU nu MT NI. AT PI. PT no sl SK rl SE ult
03: Now to reset the router'l
A3: When the router is powered on and
button lot! second,The router is reset Successfully when all LEDS blink once,
LED indicator is blinking, hold down the Reset
tnclmical Support
shenzhen Tenda Technology Co., Ltd.
as Eloor, Tower ca, NO,i om , zhongshanyuan Poad, Nanshan District, Shenzhen, china.
Sisosz
USA notline: lsBUU'57075592
Canada hotllne isBBB'BQB'fiQGG
Website: http://www,tendaus com
Email: Support,usa@tenda,com,cn
Horlg Kong Hotllne: 0085278|93|998
Website: http://www,tendacn,com
EcmAll: support@tenda.com.m
copyright
e mi 7 Shenzhen Tenda Technology Co., Ltd. All rights reserved.
Tenda is a registered trademark legally held by shenzhen TendaTechnology Co.. Ltd. Other
brand and product names mentioned herein are trademarks or registered trademarks oftheir
respective holders. Specifications are subyect to change without notice.
Winn
Ngfiififi
§F512.5*287mm;ifi)§102.5*143.5mm
AC9V3.0—TDCOl§§}EFq‘§+l%lI§—E mgfiififi
10034838 7093532155 iii .
QE—
E\t~b
fist
Ah
qr»
AC9V3.0—TDC01
kit-R
g?
hale
XXE$¥t
v1.0 Q9}; 11mm it?
do
Tifii$

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Create Date                     : 2018:01:19 15:16:47+08:00
Creator                         : Adobe Acrobat 11.0
Modify Date                     : 2018:01:22 18:57:46+08:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Metadata Date                   : 2018:01:22 18:57:46+08:00
Creator Tool                    : Adobe Acrobat 11.0
Format                          : application/pdf
Document ID                     : uuid:14bca24c-d904-46cb-b523-e9c31819af91
Instance ID                     : uuid:f4217e59-6257-4188-bbc5-ef4f026f35e0
Producer                        : Adobe Acrobat Pro 11.0.1 Paper Capture Plug-in
Page Count                      : 1

EXIF Metadata provided by EXIF.tools