TENDA TECHNOLOGY W330A Wireless N300 Ceiling Access Point User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2421553
Application ID	yiUZFyW3kXu77wy3+8aObw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	45.38kB (567215 bits)
Date Submitted	2014-10-17 00:00:00
Date Available	2014-10-17 00:00:00
Creation Date	2017-10-20 20:18:59
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-10-20 20:18:59
Document Title	Microsoft Word - User Manual
Document Creator	PScript5.dll Version 5.2
Document Author:	maggie

Install Guide
1 Open the Package
Wireless N300 Ceiling Access Point*1
Ethernet Cable*1
Bracket*1
Screw*4
Expansion Bolt*4
Position Paster*1
Install Guide*1
If any item is incorrect, missing, or damaged, please contact your reseller for immediate
replacement.
2 Get to Know the Device
LED Light
Status
Description
Solid
The device is starting.
Blinking
The device is functioning normally.
SYS
The device is receiving no electric power or the LED light is
Off
turned off on the web page of the AC.
Button
Function Description
Interface
A10/100M auto-negotiationRJ-45port that can:
a) connect to a PoE device for both data and electric power
LAN
transmission;
b) connectto a PC, switch or any other Ethernet device for data
communication only.
Press and hold it with a needle for 6 seconds. The device will be
RST
restored to factory default settings in 1 minute.
3 Install the Device
Step 1Prepare the following:
Step 2Adhere the position paster onto the ceiling where your AP will be installed.
Step 3Borefour 25~30mm deep holes by using the hammer drill (6mm drill bit)according
to the marks on the position paster.
Step 4Strike the expansion bolts into the holes with the rubber hammer, and then fix the
bracket with the provided screws.
Step 5Attach the device to the bracket and make sure it is aligned correctly.
4 Connect the Device
Step 1Connect the AP’s LAN port to an IEEE 802.3af-compliant PoE switch’s PoE port
with an Ethernet cable.
Step 2 Connect an access controller to the core switch with an Ethernet cable.
Step 3 Connect other devices and check the network topology.
Tips
As AC500 will configure the AP,there is no need to configure the AP. If you want to
know the configuration method, please refer to the user guide of AC500.
When used alone (without being managed by an access controller), this AP’s default
SSID is Tenda_XXXXXX,where XXXXXX is the last six characters of its MAC
addresson the label on the back of AP.
©2014 Shenzhen Tenda Technology Co., Ltd. All rights reserved.
This documentation (including pictures, images, and product specifications, etc.) is for
reference only. To improve internal design, operational function, and/or reliability,Tenda
reserves the right to make changes to the products described in this document without
obligation to notify any person or organization of such revisions or changes.
5 Safety
a Emiission Stateme
and
ent
CE Mark Warning
Thiss is a Classs B productt. In a dom
mestic enviro
onment, thiss product m
may cause radio
interference, in which case
e the user may
m be requ
uired to take
e adequate measures. This
999/5/EC.
device compliess with EU 19
TE: (1) The manufacture
er is not responsible for any radio or
o TV interferrence cause
ed by
NOT
unauthorized modifications
s to this equipment.
(2) To avvoid unnece
essary radia
ation
nded to use a shielded RJ45 cable..
interference, it is recommen
C Statement
FCC
Thiss device com
mplies with Part
P 15 of th
he FCC Rule
es. Operatio
on is subjectt to the follow
wing
two conditions: (1) This de
evice may not
n cause ha
armful interfference, and
d (2) this de
evice
ny interferen
nce received
d, including interference
e that may ccause undes
sired
musst accept an
operation.
and found
to com
mply with the
e limits for a Class B digital
Thiss equipmentt has been tested
device, pursuan
nt to Part 15
1 of the FCC
Rules. These limitts are desig
gned to pro
ovide
otection aga
ainst harmful interferen
nce in a re
esidential in
nstallation. This
reassonable pro
equipment gene
erates, usess and can radiate radio
o frequency energy and
d, if not insta
alled
w the instructions, ma
ay cause ha
armful interfference to radio
and used in acccordance with
mmunicationss. Howeverr, there is no
n guarantee that interf
rference willl not occur in a
com
partticular installation. If th
his equipme
ent does ca
ause harmfful interferen
nce to radio or
televvision recep
ption, which can be dettermined by
y turning the
e equipmentt off and on, the
user is encoura
aged to try to
o correct the
e interference by one of the following
g measures
s:
or relocate the
e receiving antenna.
— Reorient
— Increase
the
e separation between th
he equipmen
nt and receivver.
— Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this equipment.
This transmitter must not be co-located or operating in conjunction with any other antenna
or transmitter.
The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance
20cm between the radiator & your body.
NOTE: (1) The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. (2) To avoid unnecessary radiation
interference, it is recommended to use a shielded RJ45 cable.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Author                          : maggie
Create Date                     : 2014:10:14 10:28:49+08:00
Modify Date                     : 2014:10:17 15:50:24-07:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Producer                        : Acrobat Distiller 7.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Metadata Date                   : 2014:10:17 15:50:24-07:00
Format                          : application/pdf
Title                           : Microsoft Word - User Manual
Creator                         : maggie
Document ID                     : uuid:27200a10-9317-488e-86be-45e771060441
Instance ID                     : uuid:522c6293-401e-40e6-965f-18e11d2f8156
Page Count                      : 8

EXIF Metadata provided by EXIF.tools