TEXTRON Fleet Management TFM10 Multimedia Display Unit with GPS and wireless communications capabilities User Manual and Quick Start Guide

TEXTRON Fleet Management Multimedia Display Unit with GPS and wireless communications capabilities and Quick Start Guide

User Manual

User Manual and Quick Start Guide Page 1 Multimedia Display Unit with GPS and wireless communications capabilitiesUser Manual and Quick Start Guide
RegulatoryInformation This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. such modifications could void the user’s authority to operate this equipment Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Industry Canada RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) il ne doit pas produire de brouillage et (2) l’ utilisateur du dispositif doit étre prêt à accepter tout brouillage radioélectrique reçu, même si ce brouillage est susceptible de compromettre le fomctionnement du dispositif. FCCID:2AN3C-TFM10,IC:23310-TFM10ContainFCCID:QISMU709S-6 The distance between user and products should be no less than 20cm 
Dimensions Front and Side View
Rear View
Connector
Hardware Specifications Features Description OS Google Android 5.1 Processor Quad Core – 1.4 GHz with graphics accelerator and Internal Temperature Sensor. Memory Min 2GB RAM + 8GB (min) FLASH Memory Expansion MicroSD Card, Up to 32GB Cellular Modem GSM/GPRS/EDGE/WCDMA/HSPAGSM：850/1900MHz WCDMA：850/1900 MHz SIM Card 1.8 / 3.0V standard SIM holder. Bluetooth Bluetooth 4.0 support A2DP - FCC pre-certified. Wi-Fi Wi-Fi 802.11 b/g/n GPS Yes, fast fix technology. NFC 13.56 MHz - ISO/IEC 14443 (ACTIVE/PASSIVE) Antennas GSM & WCDMA internal embedded antenna, 2.4G BT&WiFi internal embedded antenna, NFC internal antenna Display 10.1in (1280 x 800, 160 dpi) IPS LCD 700 nits LED backlight brightness Touch Panel 10-point CapacitiveAmbient Light Detector Control display brightness Battery 6,000 mAh + Internal Temperature Sensor; LiFePO4 chemistry. Buttons Power Button Motion Detection Tri-axis accelerometer, G-sensor Speakers Stereo, min 2W per channel speaker support. Microphone Low noise, suitable for voice capture, communication apps. USB USB2.0 X 1 port USB OTG Serial Interface RS232 TTL level, ESD, overvoltage protection. Automotive Interface CANBUS, ESD, overvoltage protection. Camera 5 Mega Pixels – support only (camera not present)
Software User Guide Welcome Screen After power up, the GPS unit will display a message with information about the golf facility it operates on. The user has access to a menu with options to enter their name and golf handicap for score keeping and other options. Add Players *optional* Access main menu Golf Course Information
Main View During Game • Hole View Once the golfer arrives on the first hole, the unit automatically transitions into play mode and shows the current hole. Distance to center/pin Golfer Location Current Time Send Message Protip To Greenview
Main View During Game • Zoomed-in Green View Distance to back of green Distance to front of green To Hole View
Scorecard Once a game is started, players can enter hole-by-hole scores. Handicap stroke holes are automatically allocated and net scores calculated as the round progresses. Edit Players and Review Scores
Messaging At any time during the round, golfers may send messages to the clubhouse. Select a message Send
Ending a Game When a round is completed, the unit will automatically return to the welcome screen and clear player information within 15-30 minutes. To end a game right away, select ‘End Game’ from the main menu. The unit will return to the welcome screen, ready for a new round. End Game

Navigation menu