THINKWARE F770 THINKWARE DASH CAM User Manual Part 2

THINKWARE CORPORATION THINKWARE DASH CAM Part 2

User Manual Part 2

Download: THINKWARE F770 THINKWARE DASH CAM User Manual Part 2
Mirror Download [FCC.gov]THINKWARE F770 THINKWARE DASH CAM User Manual Part 2
Document ID3616002
Application IDgRWEJpS+u5XIniuK877Sfw==
Document DescriptionUser Manual Part 2
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize458.21kB (5727613 bits)
Date Submitted2017-10-24 00:00:00
Date Available2017-10-24 00:00:00
Creation Date2017-10-24 12:10:35
Producing SoftwareAdobe PDF Library 15.0
Document Lastmod2017-10-24 12:10:48
Document TitleUser Manual Part 2
Document CreatorAdobe InDesign CC 2017 (Windows)

2-10. Audio Recording
 Briefly press the Voice Recording (
) button to turn the audio recording on or off.
Press Briefly
Cautions
 sers do not reserve the right to use the product for purposes other than as specified in this user guide.
According to the Personal Information Protection Act and other related regulations, the user/owner may
be held liable if the video and/or conversation recorded by the device are distributed without their
consent. Thus, special attention should be paid in using this product.
2-11. Formatting MicroSD Card
 Press and hold the FORMAT button for 3 seconds to initiate memory card format.
18
02
Basics
2-12. Initializing Device Settings
 Press and hold REC and FORMAT buttons simultaneously to reset the device settings to default factory
settings.
2-13. Upgrading Firmware
 The system will automatically be updated if the MicroSD card contains the firmware upgrade file.
The device restarts automatically after the upgrade has been completed.
 Make sure your device is always up to date with latest firmware.
Please check back frequently at THINKWARE website (www.thinkware.com) for the latest firmware updates.
 Do NOT disconnect your device from power while it is being updated. This will result in damage to the
dash cam.
19
3. Mobile Viewer Application
3-1. Thinkware Dash Cam Mobile Viewer
Thinkware Dash Cam Mobile Viewer App is available through Google Play and the App Store from iTunes.
 Mobile App device OS version requirements: Android 4.0 (Ice Cream Sandwich) or higher, iOS 7.0 or higher.
 You may disable Cellular data (Data networks) for using apps in some of devices operating Lollipop.
 For iOS devices, Wi-Fi settings can only be accessed using the smartphone or tablet settings.
3-1-1. Connect Wi-Fi with Password
①D
 ownload and install Thinkware Dash Cam Mobile Viewer application
② P ress briefly the Wi-Fi button on the dash cam to enter Wi-Fi connection mode
③ (Make sure to turn on the Wi-Fi in the device setting for iOS devices) In the Thinkware Dash Cam Mobile
Viewer application, turn on the Wi-Fi option, select “thinkware” from SSID list, and enter password as
“123456789”
P assword is only required during first time you try to connect.
The device will auto-connect in subsequent connections.
Press Briefly
Wi-Fi LED
※ Dash cam will automatically turn off the Wi-Fi connection mode if not connected within 2 minute.
Cautions
T he distance range between the dash cam and connecting smart device is approximately 10 meters (33ft)
in an open field environment.
Use of ADAS features (road safety warning system) are restricted while being accessed using Thinkware
Dash Cam Mobile Viewer.
When device and mobile phone are connected over Wi-Fi, all control buttons of device will not be working,
except power button.
20
03
Mobile Application
 Connecting with WPS ( Only Android OS)
①D
 ownload and install Thinkware Dash Cam Mobile Viewer application.
② P ress and hold Wi-Fi (
mode.
) button for more than 5 seconds on the dash cam to enter WPS connection
③ S elect "WPS" button on the Thinkware Dash Cam Mobile Viewer application to automatically connect to
the Thinkware dash cam using Wi-Fi. (takes approximately 20~30 seconds)
: Retry Wi-Fi search.
Press and hold for 5 seconds
21
3-2. Thinkware Dash Cam Mobile Viewer Main Menu
Following section describing the Thinkware Dash Cam Mobile Viewer menu is based on Android devices.
Layouts and screen captures might be slightly different for iOS devices.
3-2-1. Live View
 Live View : When using Live View, the continuous recording will be disabled.
Back
Switch to front/rear view
(appears only when
the rear view camera is
connected)
Live View
Audio recording
on/off
Current speed/voltage
Current date/time
GPS status
22
03
Mobile Application
3-2-2. Video List
 Continuous Recording : Lists loop recording videos during continuous mode
(in 1 minute segments)
 Incident in Continuous Mode : Lists incident recording videos during
continuous mode
 Parking image : Lists motion detection recording videos during parking
surveillance mode
 Incident in Parking Mode : Lists incident recording videos during parking
surveillance mode
 Manual Recording : Lists manual recording videos initiated by selecting
manual recording button
 Recording List Menu
Download : Copies selected video file to the device from the dash cam
MicroSD card (Wi-Fi must be connected)
Video Info : Displays date/time, file name, recording type, size, duration,
video quality for the selected video file
Delete : Removes the selected video file
23
 Video download
Front view videos
Rear view videos
Cautions
For Android OS devices, it may take a while until downloaded videos are displayed in the list.
24
03
Mobile Application
3-2-3. Memory Settings
 Memory Card Settings
Memory Partition Setting :
	Sets how storage space on the memory card will be allotted for each
recording mode (Entire memory card will be formatted when the
memory partition setting is changed)
Memory card format :
	Formats the MicroSD card. Formatting will completely erase all video
files stored in the memory card
※ It is recommended that you back up data before formatting the
memory card.Once you format the memory card, all data will be
deleted and cannot be restored.The method for formatting a
MicroSD card might vary depending on the computer operating
system.
Video Overwrite Setting :
	Sets the overwriting option which will allow new video files to
overwrite oldestvideo in storage reserved for each mode
 Dual Save Settings
Dual Save Video : Lists Dual Save videos
Copy to memory card : Copy all Dual Save videos saved on the internal memory to the MicroSD card
Delete Dual Save : Delete all Dual Save videos saved on the internal
memory
25
3-2-4. Settings > Dashcam Setting
 Camera Settings
Brightness-F/R :
Sets the video recording brightness for front/rear camera
Wide Dynamic Range :
	Sets the WDR mode to record clear video even in extreme contrast/
back-lit environment.
 Record Settings
Cont. sensitivity :
	Sets the impact sensitivity during continuous recording mode. It is
recommended that you set the sensitivity according to vehicle type.
High sensitivity setting is recommended for cars with softer ride such
as luxury sedans; while low sensitivity setting is recommendedfor cars
such as performance cars, trucks, or SUVs which tends to have stiffer
suspension settings.
Parking Mode :
	Monitors vehicle ignition status to automatically convert to parking
mode when the vehicle engine is turned off. The dash cam must be
hardwired to the vehicle for the use of parking mode.
Parking sensitivity / Motion sensitivity :
Sets the motion detection sensitivity level during Parking mode.
Sets impact sensitivity when using Time Lapse function.
Super Night Vision :
	Enhance video exposure for low-light conditions during Parking
Surveillance Mode.
Device auto-Off Timer :
	Sets the timer for the dash cam to automatically shut down in parking
mode to prevent From draining the vehicle battery
Device auto-Off Voltage :
Sets the voltage level for the dash cam to automatically shut down if the dash cam detects voltage level
lower than configured value for more than 5 minutes in order to prevent fromdraining the vehicle battery
26
03
Mobile Application
 Road Safety Warning System Settings
Safety Camera Alert :
Sets the audible notifications for road safety warnings
Vehicle type :
	Sets the vehicle type to be used to optimize Advanced Driver
Assistance System (ADAS) features such as Lane Departure Warning
System (LDWS) and Forward Collision Warning System (FCWS).
LDWS (Lane Departure Warning) :
Sets the LDWS driver assistance notification.
Left LDWS sensitivity / Right LDWS sensitivity :
Sets the lane departure detection L/R sensitivity. (It is recommended
that the sensitivity is set at high for wider vehicles)
LDWS speed :
	Sets the speed at which the LDWS notification is enabled. LDWS
warning will only be notified to the driver when the vehicle veers
off the lane travelling at the configured speed.
Forward Collision Warning System (FCWS) :
Sets the FCWS driver assistance notification and Sets the forward
collision detection sensitivity .
 System Settings
Language : Sets dash cam system language
Volume : Sets the volume level
Security LED : Sets the pattern for security LED
Time zone : Sets the time zone
Daylight saving : Sets the daylight saving time
Speed unit : Sets the unit for the vehicle speed
S peed Stamp : Sets vehicle speed information (tracked by GPS) to
be shown or hidden directly on video
27

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Has XFA                         : No
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Modify Date                     : 2017:10:24 12:10:48-07:00
Create Date                     : 2017:10:24 12:10:35-07:00
Metadata Date                   : 2017:10:24 12:10:48-07:00
Creator Tool                    : Adobe InDesign CC 2017 (Windows)
Format                          : application/pdf
Document ID                     : uuid:d1e53f97-82a4-4fb2-9270-49b63ec9122d
Instance ID                     : uuid:7140fe2b-7cd7-411c-bebd-f443a8348f39
Producer                        : Adobe PDF Library 15.0
Page Count                      : 10
Creator                         : Adobe InDesign CC 2017 (Windows)
EXIF Metadata provided by EXIF.tools
FCC ID Filing: 2ADTG-F770

Navigation menu