TLi TLI-103N Smart Insole User Manual 1

Download:
Mirror Download [FCC.gov]
Document ID	3752140
Application ID	YfwQorFFB0DfC/xMm07gDA==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	14.76kB (184514 bits)
Date Submitted	2018-02-13 00:00:00
Date Available	2018-08-05 00:00:00
Creation Date	2018-01-19 13:03:25
Producing Software	Microsoft® PowerPoint® 2013
Document Lastmod	2018-01-19 13:03:25
Document Title	슬라이드 1
Document Creator	Microsoft® PowerPoint® 2013
Document Author:	user

TLi Inc.
Configuration of product
•
•
•
•
1 set of smart insole
2 batteries (3V CR2032)
2 water proof tapes
Product manual
3. Insert smart insole
After completion of connect to mobile
phone, apply water proof tape as
indicated in below.
How to prepare
iSOL
Smart walking sensor
Product manual
FCC ID : 2AOPXTLI-103N
1.Install battery
Rotate battery cover to counterclockwise
and open battery slot. Face ‘+’ to
top and insert battery. Put battery
cover back and rotate to clockwise
to close.
2. Connect to mobile phone
Refer ‘connect to mobile’ chapter
For use
Major feature of product
•Dash board
•
•
•
Walk information; number of walk, distance,
consumption of calories will be displayed
when insole is connected to mobile phone.
Activity analysis; it displays activities after
certain period of duration by walking,
running, sitting, and standing.
Walk analysis; it displays analysis after
certain period of duration by stride,
balance between right and left, foot angle,
heel to toe, and distribution of pressure.
• Mission
•
•
Individual mission; offers to increase
amount of activity and improvement of
walk, based on individual program.
Group mission; offer of group events by
device provider.
• Game
Funny balance; games help to improve maintain
of balance of body.
Specification
Installation of mobile application
• Connect sensor
1. Check Bluetooth is on.
2. Keep smart insoles as close as possible
to mobile phone.
3. Run mobile app and get it paired with
smart insole both left and right.
4. Once connected successfully, app will
ask ‘shake insole to check connection’.
Shake insole to connect
• System requirement
Android 4.4 or above
iOS9 or above
Display resolution 1280 x 720 or above
• Installation of mobile app
Download from app stores.
Cautions
• Do not renovate or disassemble.
• Do not leave product nearby fire
source.
• Pay extreme attention to children to
prevent them to swallow the battery.
• For stable operation, do not expose
product to water or humidity.
• Splash proof only.
Product warranty
• Wash product surface by wet rags, do
• Warranty period; 6 month from purchase not wash product into water.
• Out of warranty cases;
- Disassembly by user
- Damage by any type of impact
- Abnormal battery install
Customer service call
Address;
7F, TLi Building, 12 Yanghyeon-ro 405 beon-gil,
Jungwon-gu, Seongnam-si, Gyeonggi-do, Korea
13438
Tel; +82-(0)31-784-6954
• Sensor; 3 axis (acceleration) and
pressure sensor
• Battery; replaceable (CR2032 (220mAh))
• Weight; 45g (battery included)
• Type of network; Bluetooth Low Energy
• Operating temperature; -10 ~ 50℃
Connect to mobile
Others
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must
accept any interference received, including interference that
may cause undesired operation.
Note: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the
following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and
receiver.
—Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician
for help.
Any changes or modifications not expressly approved by the
party responsible for compliance could void the user's
authority tooperate this equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 1
Language                        : ko-KR
Tagged PDF                      : Yes
Title                           : 슬라이드 1
Author                          : user
Create Date                     : 2018:01:19 13:03:25+09:00
Modify Date                     : 2018:01:19 13:03:25+09:00
Producer                        : Microsoft® PowerPoint® 2013
Creator                         : Microsoft® PowerPoint® 2013

EXIF Metadata provided by EXIF.tools