TOPICON MDT7P GPS product User Manual Business Proposal
TOPICON HK LIMITED GPS product Business Proposal
TOPICON >
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2940511 |
| Application ID | lqKoqcqOCQyK6rHCUV5XuA== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 71.67kB (895891 bits) |
| Date Submitted | 2016-03-24 00:00:00 |
| Date Available | 2016-03-24 00:00:00 |
| Creation Date | 2015-01-21 12:38:56 |
| Document Lastmod | 2016-03-22 18:33:23 |
| Document Title | Business Proposal |
| Document Author: | Keller Sin |
Quick Start Guide Product introduction MDT720 has optional features (wifi, BT, GPS, 3G, back camera, front camera, RFID, lightsensor, gyroscope, accelerometer) Highlights: 3G – pls insert the SIM card when the device if complete off front camera – there are 6 IR LED around the camera. if you enable the flash function in front camera, then you will see the IR LED is on. In this case, the picture will be in black and white On/off button Pls move upward to open the cover, you will hear “click” sound, it is normal SD card slot, SIM card slot and reset button Screw hole is available if you want to lock the cover Pls cover it well in order to ensure the waterproof performance Pls move right to open the cover, you will hear “click” sound, it is normal Micro usb for connecting to PC or charging Pls cover it well in order to ensure the waterproof performance All rights reserved. No part of this work may be reproduced or copied in any form or by any means (graphic, electronic, or mechanical, including photocopying, recording, recording taping, or information and retrieval systems) without the written permission of the copyright owner Direction of SIM card and SD card All rights reserved. No part of this work may be reproduced or copied in any form or by any means (graphic, electronic, or mechanical, including photocopying, recording, recording taping, or information and retrieval systems) without the written permission of the copyright owner Interface 1. There is TTL serial port (Tx/RX) or OTG from 10 pin usb connector 10pin usb connector pls see the above schematics of our USB connector in our PND, it is 10 pin connector. Pin 4 and 6 can be used for USB or TTL serial interface (Rx/Tx) and Pin 8 is ID pin which is used to distinguish for USB or serial interface. if it is connected to GND, then the pin 4 and 6 will be Rx/Tx interface. if it is connected to Vcc, then the pin 4 and 6 will be D- and D+. All rights reserved. No part of this work may be reproduced or copied in any form or by any means (graphic, electronic, or mechanical, including photocopying, recording, recording taping, or information and retrieval systems) without the written permission of the copyright owner 2. There are Rs232 interface and OTG from cradle. Highlights: OTG port from device (10pin usb connector) and cradle are sharing same pins. Only 1 OTG interface can be used. Usb connector for OTG or charging This cable can be customized when you placed order For sample, it will be 12 pins connector, pls see below or pins assignment Pin 1 – Ignition (white) Pin 2 – GPIO (reserved) (green) Pin 3 – CTS (red) Pin 4 – car battery input (12-28V) (black) Pin 5 – RTS (blue) Pin 6 – RXD (yellow) Pin 7 – TXD (purple) Pin 8 – GND (grey) Pin 9 – GND (orange) Pin 10 – NOT connected (brown) Pin 11 – NOT connected (pink) Pin 12 – 5V input (white-black) Higlights: if you are using OTG with external device, you can only charge the device by 12V input. All rights reserved. No part of this work may be reproduced or copied in any form or by any means (graphic, electronic, or mechanical, including photocopying, recording, recording taping, or information and retrieval systems) without the written permission of the copyright owner Device installation There are few options 1. Directly attach mount to device (no cradle in this case) 2 screw hole at the back Pls use M4 18mm screw 2. Cradle attached to car mount with different screw length 2 screw hole at the back Case 1 – if M4 18mm screw is used, the device will be removable from cradle Case 2 – if M4 23mm screw is used, the device will be not removable from cradle All rights reserved. No part of this work may be reproduced or copied in any form or by any means (graphic, electronic, or mechanical, including photocopying, recording, recording taping, or information and retrieval systems) without the written permission of the copyright owner Mount options: There are many car mount options. You can use the 2 screw hole (black colour) or 4 screw hole (yellow colour) to attach the different mount system. Option 1: Low cost wind shield car mount Option 2: Many mount option from RAM MOUNT You can choose the mount you like from their website (www.rammount.com) Example 1 (RAP-B-166-2U) All rights reserved. No part of this work may be reproduced or copied in any form or by any means (graphic, electronic, or mechanical, including photocopying, recording, recording taping, or information and retrieval systems) without the written permission of the copyright owner Example 2 (RAP-B-166-2U) Example 3 (RAM-B-138U-A) Example 4 (RAP-B-138-AU) All rights reserved. No part of this work may be reproduced or copied in any form or by any means (graphic, electronic, or mechanical, including photocopying, recording, recording taping, or information and retrieval systems) without the written permission of the copyright owner Option 3: You can also choose mount from HR (http://www.hr-autocomfort.de/) There are 4 hole plate which you can lock in the cradle with 4 screw hole. then, you can choose the mount from HR. Example 1 (1719/0) Option 4: There are other mount which can support this 2 screw hole and 4 screw hole at the back can be used. For my understanding, there are other mount company also use this 2 or 4 screw hole as standard. Pls let know if you need other mounting system or solution. All rights reserved. No part of this work may be reproduced or copied in any form or by any means (graphic, electronic, or mechanical, including photocopying, recording, recording taping, or information and retrieval systems) without the written permission of the copyright owner Software support We can provide serial port apk and NFC demo. Pls contact our Sales for details. Pls also see the software setting for serial port two serial ports are available one the device : one shares the the USB data pins of the mini A/B USB connector. Only TX and RX pins are available, voltage is TTL 3.3V. one is on the Pogopin interface (pins 3, 5, 6 and 7). TX, RX CTS and RTS are available, voltage is RS232. On the software side, the tty devices corresponding to these ports are : for the RS232 port, /dev/user_external_tty RS232 interface need to be enable prior to use : $> echo 1 > /dev/enable_external_tty After use, it can be disabled with : $> echo 0 > /dev/enable_external_tty for the TTL port, /dev/user_tty In addition, one I2C port is available both on the USB and Procopin connectors. The I2C interface is accessible through /dev/user_i2c accessible through /dev/user_i2c All rights reserved. No part of this work may be reproduced or copied in any form or by any means (graphic, electronic, or mechanical, including photocopying, recording, recording taping, or information and retrieval systems) without the written permission of the copyright owner FCC RF Exposure Information and Statement The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types GPS product (FCC ID: 2AHAF-MDT7P) has also been tested against this SAR limit. The highest reported SAR values for body is 0.841W/kg. This device was tested for typical body operations with the back of the tablet kept 0mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 0mm separation distance between the user's body and the back of the tablet. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Information to Users According to the RSS-Gen section 8.4 and RSP-100 section 3.2, for this EUT, the instructions or operation manual furnished the user shall include the following or similar statement, placed in a prominent location in the text of the manual: IC WARNING This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Tagged PDF : No XMP Toolkit : 3.1-702 Create Date : 2015:01:21 12:38:56+08:00 Creator Tool : Microsoft® Word 2010 Modify Date : 2016:03:22 18:33:23+08:00 Metadata Date : 2016:03:22 18:33:23+08:00 Format : application/pdf Creator : Keller Sin Title : Business Proposal Producer : Microsoft® Word 2010 Document ID : uuid:cded4f57-985e-4004-888d-d8e2690cfdb7 Instance ID : uuid:ec986db5-6067-42e5-aa7e-0427e5ddcde0 Has XFA : No Page Count : 11 Language : zh-HK Author : Keller SinEXIF Metadata provided by EXIF.tools