TP Link Technologies BS1001 Groovi Ripple User Manual bt 1033
TP-Link Technologies Co., Ltd. Groovi Ripple bt 1033
User Manual
TP-LINK Groovi Ripple Portable Bluetooth Speaker
BS1001
User Manual
Caution: 1) Photos are for reference only, actual product may vary! 2)
TP-LINK is committed to improving product quality and performance,
but product technology and design are subject to change without prior notice .
TP-LINK Groov i Ri pp le Portable Bluetoo th S pe aker
BS1001
User Manual
Cau tion: 1 ) Photo s are for r efere nce onl y, actua l pro duc t may v ary ! 2)
TP- LINK is c ommit ted to im provi ng prod uct qua lity an d perfo rmanc e,
but p roduc t techn ology a nd desi gn are su bject t o chang e witho ut prio r notic e .
CONTENTS IN THE BOX:
1. BS1001: 2.USB charging cable
3. Manual 4. Guarantee card
Important safety instructions:
1. Please carefully read and follow the safety instructions before using the product.
2. Please avoid leaving the product in a damp environment, exposing it to sunlight,
or placing it near re.
3. Please do not use the product near water.
4. Please do not place the product near heat-generating appliances such as a radiator,
air conditioner, or stove.
5. Please use the recommended power voltage.
6. Please do not disassemble the product without authorization.
7. Explosion may occur if battery is replaced incorrectly. Please replace battery only with
the same or equivalent type.
8. Please avoid leaving the product exposed to sunlight, rain, water droplets, or a hot or
moist environment.
9. Please enjoy the music at an appropriate volume to protect your health and sound equipment.
10. Please unplug the charging cable when it is not in use.
PRODUCT DESCRIPTION:
Indicate led
1
Power button
2
Vol+ button
3
Vol- button
4
Micro USB charging port
5
3.5 mm audio input interface 3.5mm
6
1
24 3
65
TECHNICAL DATA:
Output power: 3.5W
Distortion: ≤1%
Frequency response: 120Hz~20KHz
SNR: >65dB
Speaker unit: 4Ω
Power input: USB/DC 5V
Sensitivity: 600mV
Product size: 88 x 88 x 41mm
Recharging Battery:
1. This product has a built-in rechargeable lithium battery. Please connect the USB charging
cable to a workable USB port (a PC/Mac or a USB power adapter).
2. When the battery is low, the red power indicator will turn on.
3. When the speaker is being recharged, the red power indicator truns on. When the
recharging is completed, the indicator will turn off.
4. When the battery is completely discharged, the product cannot be turned on before being
recharged for a while.
The Speaker Paired with a Bluetooth Device (First Connection):
1. Make sure that the product has sucient power or has been connected to power.
2. Short Press the power button.
3. The blue power indicator turns on and the Bluetooth pairing blue indicator ashes.
4. Start the Bluetooth device (for example, a mobile phone) to searching mode (just as you
would when searching for a new Bluetooth device on the phone)
5. “Groovi Ripple” is displayed in the list of Bluetooth devices.
6. Select “Groovi Ripple”. Enter “0000” if prompted to enter a pairing code.
7. The blue LED stops blinking and stays blue. This indicates a successful pairing.
8. Check the Bluetooth device to make sure that the connection is successful.
9. Press the power button to turn off the product. The product will shut down automatically
after 30 minutes if no audio input is received.
ATTENTION:
● To connect the product to another Bluetooth device, you must rst disconnect the current
Bluetooth connection. Long Press Power button to enter a new device searching and pairing
mode.
● When the product is restarted, it will automatically reconnect to the previously paired device
by default. If the automatic connection fails, you need to do the connection manually.
AUX IN Mode Operation Instructions:
1. Insert one end of a 3.5 mm stereo audio cable into the “Aux in” interface on the back of this
product.
2. Put the other end of the stereo audio cable into the headphone jack of an external audio
device.
