TP Link Technologies BS1001 Groovi Ripple User Manual bt 1033

Download:
Mirror Download [FCC.gov]
Document ID	2722605
Application ID	e6HChspzxdwxBsL+WTIFLA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	139.96kB (1749517 bits)
Date Submitted	2015-08-21 00:00:00
Date Available	2015-08-21 00:00:00
Creation Date	2015-07-22 16:12:32
Producing Software	Corel PDF Engine Version 16.1.0.843
Document Lastmod	2015-07-22 16:12:32
Document Title	bt-1033 六面图.cdr
Document Creator	CorelDRAW X6
Document Author:	liuhg(刘虎根)

TP-LINK Groovi Ripple Portable Bluetooth Speaker
BS1001
User Manual
Caution: 1) Photos are for reference only, actual product may vary! 2)
TP-LINK is committed to improving product quality and performance,
but product technology and design are subject to change without prior notice .
CONTENTS IN THE BOX:
1. BS1001:
2.USB charging cable
TP-LINK Groovi Ripple Portable Bluetooth Speaker
BS1001
User Manual
Caution: 1) Photos are for reference only, actual product may vary! 2)
TP-LINK is committed to improving product quality and performance,
but product technology and design are subject to change without prior notice .
3. Manual
4. Guarantee card
Important safety instructions:
1. Please carefully read and follow the safety instructions before using the product.
2. Please avoid leaving the product in a damp environment, exposing it to sunlight,
or placing it near re.
3. Please do not use the product near water.
4. Please do not place the product near heat-generating appliances such as a radiator,
air conditioner, or stove.
5. Please use the recommended power voltage.
6. Please do not disassemble the product without authorization.
7. Explosion may occur if battery is replaced incorrectly. Please replace battery only with
the same or equivalent type.
8. Please avoid leaving the product exposed to sunlight, rain, water droplets, or a hot or
moist environment.
9. Please enjoy the music at an appropriate volume to protect your health and sound equipment.
10. Please unplug the charging cable when it is not in use.
PRODUCT DESCRIPTION:
1 Indicate led
2 Power button
3 Vol+ button
4 Vol- button
5 Micro USB charging port
6 3.5 mm audio input interface 3.5mm
TECHNICAL DATA:
Output power: 3.5W
Distortion: ≤1%
Frequency response: 120Hz~20KHz
SNR: >65dB
Speaker unit: 4Ω
Power input: USB/DC 5V
Sensitivity: 600mV
Product size: 88 x 88 x 41mm
Recharging Battery:
1. This product has a built-in rechargeable lithium battery. Please connect the USB charging
cable to a workable USB port (a PC/Mac or a USB power adapter).
2. When the battery is low, the red power indicator will turn on.
3. When the speaker is being recharged, the red power indicator truns on. When the
recharging is completed, the indicator will turn off.
4. When the battery is completely discharged, the product cannot be turned on before being
recharged for a while.
The Speaker Paired with a Bluetooth Device (First Connection):
1. Make sure that the product has sucient power or has been connected to power.
2. Short Press the power button.
3. The blue power indicator turns on and the Bluetooth pairing blue indicator ashes.
4. Start the Bluetooth device (for example, a mobile phone) to searching mode (just as you
would when searching for a new Bluetooth device on the phone)
5. “Groovi Ripple” is displayed in the list of Bluetooth devices.
6. Select “Groovi Ripple”. Enter “0000” if prompted to enter a pairing code.
7. The blue LED stops blinking and stays blue. This indicates a successful pairing.
8. Check the Bluetooth device to make sure that the connection is successful.
9. Press the power button to turn off the product. The product will shut down automatically
after 30 minutes if no audio input is received.
ATTENTION:
● To connect the product to another Bluetooth device, you must rst disconnect the current
Bluetooth connection. Long Press Power button to enter a new device searching and pairing
mode.
● When the product is restarted, it will automatically reconnect to the previously paired device
by default. If the automatic connection fails, you need to do the connection manually.
AUX IN Mode Operation Instructions:
1. Insert one end of a 3.5 mm stereo audio cable into the “Aux in” interface on the back of this
product.
2. Put the other end of the stereo audio cable into the headphone jack of an external audio
device.


---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Profile CMM Type                : Lino
Profile Version                 : 2.1.0
Profile Class                   : Display Device Profile
Color Space Data                : RGB
Profile Connection Space        : XYZ
Profile Date Time               : 1998:02:09 06:49:00
Profile File Signature          : acsp
Primary Platform                : Microsoft Corporation
CMM Flags                       : Not Embedded, Independent
Device Manufacturer             : IEC
Device Model                    : sRGB
Device Attributes               : Reflective, Glossy, Positive, Color
Rendering Intent                : Perceptual
Connection Space Illuminant     : 0.9642 1 0.82491
Profile Creator                 : HP
Profile ID                      : 0
Profile Copyright               : Copyright (c) 1998 Hewlett-Packard Company
Profile Description             : sRGB IEC61966-2.1
Media White Point               : 0.95045 1 1.08905
Media Black Point               : 0 0 0
Red Matrix Column               : 0.43607 0.22249 0.01392
Green Matrix Column             : 0.38515 0.71687 0.09708
Blue Matrix Column              : 0.14307 0.06061 0.7141
Device Mfg Desc                 : IEC http://www.iec.ch
Device Model Desc               : IEC 61966-2.1 Default RGB colour space - sRGB
Viewing Cond Desc               : Reference Viewing Condition in IEC61966-2.1
Viewing Cond Illuminant         : 19.6445 20.3718 16.8089
Viewing Cond Surround           : 3.92889 4.07439 3.36179
Viewing Cond Illuminant Type    : D50
Luminance                       : 76.03647 80 87.12462
Measurement Observer            : CIE 1931
Measurement Backing             : 0 0 0
Measurement Geometry            : Unknown
Measurement Flare               : 0.999%
Measurement Illuminant          : D65
Technology                      : Cathode Ray Tube Display
Red Tone Reproduction Curve     : (Binary data 2060 bytes, use -b option to extract)
Green Tone Reproduction Curve   : (Binary data 2060 bytes, use -b option to extract)
Blue Tone Reproduction Curve    : (Binary data 2060 bytes, use -b option to extract)
Page Count                      : 6
Create Date                     : 2015:07:22 16:12:32+08:00
Modify Date                     : 2015:07:22 16:12:32+08:00
Producer                        : Corel PDF Engine Version 16.1.0.843
Author                          : liuhg(刘虎根)
Creator                         : CorelDRAW X6
Title                           : bt-1033 六面图.cdr

EXIF Metadata provided by EXIF.tools