TP Link Technologies HS107 Smart Wi-Fi Plug, 2-Outlet User Manual TE7HS107

TP-Link Technologies Co., Ltd. Smart Wi-Fi Plug, 2-Outlet TE7HS107

TE7HS107_User Manual

Smart PlugLet’s get started with your new Smart Plug.WELCOME TO KASAwww.tp-link.comKasaDOWNLOAD KASAGet the Kasa for Mobile app from the Apple App Store or Google Play.STEP 1Connect your mobile device to a 2.4GHz Wi-Fi network.CONNECT TO NETWORKSTEP 2Tap the        button in the Kasa app and select Smart Plug. Follow the app instructions to complete the setup.ADD TO KASASTEP 3Coee Maker: 800 WDesk Lamp: 235.2 WLCD: 270 WHeater: 1500 WHumidier: 260 WIron: 1500 WToaster: 850 WTower Fan: 50 WSupported Load Types:
Need some help?Visit www.tp-link.com/support  for User Guides, FAQs, Warranty & more?7106507993  REV1.0.0 © 2018 TP-LinkTP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC and 2011/65/EU.The original EU declaration of conformity may be found athttp://www.tp-link.com/en/ce.
FCC compliance information statementProduct Name:Smart Wi-Fi Plug, 2-OutletModel Number: HS107Responsible party:TP-Link USA Corporation, d/b/a TP-Link North America, Inc.Address: 145 South State College Blvd. Suite 400, Brea, CA 92821Website: http://www.tp-link.com/us/Tel: +1 626 333 0234Fax: +1 909 527 6803E-mail: sales.usa@tp-link.comThis equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to part 15 of the FCC Rules. These limits are designed to providereasonable protection against harmful interference in a residential installation. Thisequipment generates, uses and can radiate radio frequency energy and, if not installedand used in accordance with the instructions, may cause harmful interference to radiocommunications. However, there is no guarantee that interference will not occur in aparticular installation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on, theuser is encouraged to try to correct the interference by one or more of the followingmeasures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected.Consult the dealer or an experienced radio/ TV technician for help.This device complies with part 15 of the FCC Rules. Operation is subject to the followingtwo conditions:1)This device may not cause harmful interference.2)This device must accept any interference received, including interferencethat may cause undesired operation.Any changes or modifications not expressly approved by the party responsible forcompliance could void the user’s authority to operate the equipment.Note: The manufacturer is not responsible for any radio or TV interference caused byunauthorized modifications to this equipment. Such modifications could void the user’sauthority to operate the equipment.
FCC RF Radiation Exposure Statement:This equipment complies with FCC RF radiation exposure limits set forth for anuncontrolled environment. This device and its antenna must not be co-located oroperating in conjunction with any other antenna or transmitter.“To comply with FCC RF exposure compliance requirements, this grant is applicable toonly Mobile Configurations. The antennas used for this transmitter must be installed toprovide a separation distance of at least 20 cm from all persons and must not beco-located or operating in conjunction with any other antenna or transmitter.”We, TP-Link USA Corporation, has determined that the equipment shown as above hasbeen shown to comply with the applicable technical standards, FCC part 15. There is nounauthorized change is made in the equipment and the equipment is properly maintainedand operated.Issue Date: 2018/2/2Canadian Compliance StatementThis device complies with Industry Canada license-exempt RSSs. Operation is subject tothe following two conditions:1)This device may not cause interference, and2)This device must accept any interference, including interference that may causeundesired operation of the device.Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareilsradio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :1)l’appareil ne doit pas produire de brouillage;2)l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, meme si lebrouillage est susceptible d’en compromettre le fonctionnement.Radiation Exposure Statement:This equipment complies with IC radiation exposure limits set forth for an uncontrolledenvironment. This equipment should be installed and operated with minimum distance20cm between the radiator & your body.Déclaration d'exposition aux radiations:Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pourun environnement non contrôlé. Cet équipement doit être installé et utilisé avec unminimum de 20 cm de distance entre la source de rayonnement et votre corps.Industry Canada StatementCAN ICES-3 (*)/NMB-3(B)
Safety InformationKeep the device away from water, fire, humidity or hot environments.Do not attempt to disassemble, repair, or modify the device.Do not use the device where wireless devices are not allowed.The socket-outlet shall be installed near the equipment and shall be easilyaccessible.For passthrough devices, plug the power strips into the integratedelectrical sockets of the devices, but devices of the same or anothertype not be stacked in normal use.Please read and follow the above safety information when operating thedevice. We cannot guarantee that no accidents or damage will occur due toimproper use of the device. Please use this product with care and operate atyour own risk.

Navigation menu