TP Link Technologies HS107 Smart Wi-Fi Plug, 2-Outlet User Manual TE7HS107

Download:
Mirror Download [FCC.gov]
Document ID	3745793
Application ID	AEkl1UmtAw40KAXY7Ibpjg==
Document Description	TE7HS107_User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	339.51kB (4243926 bits)
Date Submitted	2018-02-08 00:00:00
Date Available	2018-02-09 00:00:00
Creation Date	2018-02-02 10:11:47
Producing Software	Adobe PDF library 11.00
Document Lastmod	2018-02-02 10:11:47
Document Title	TE7HS107_User Manual
Document Creator	Adobe Acrobat 8.0 Combine Files

WELCOME TO K ASA
Let’s get started with your new Smart Plug.
Kasa
STEP 1
DOWNLOAD KASA
Get the Kasa for Mobile app from
the Apple App Store or Google Play.
STEP 2
CONNECT TO NETWORK
Connect your mobile device to a
2.4GHz Wi-Fi network.
STEP 3
ADD TO KASA
Tap the
button in the Kasa app and
select Smart Plug. Follow the app
instructions to complete the setup.
Supported Load Types:
Coffee Maker: 800 W
Desk Lamp: 235.2 W
LCD: 270 W
Smart Plug
Heater: 1500 W
Humidifier: 260 W
Iron: 1500 W
Toaster: 850 W
Tower Fan: 50 W
www.tp-link.com
?
Need some help?
Visit www.tp-link.com/support
for User Guides, FAQs, Warranty & more
TP-Link hereby declares that the device is in compliance with the essential requirements
and other relevant provisions of directives 2014/53/EU, 2009/125/EC and 2011/65/EU.
The original EU declaration of conformity may be found at http://www.tp-link.com/en/ce.
7106507993 REV1.0.0
© 2018 TP-Link
FCC compliance information statement
Product Name:Smart Wi-Fi Plug, 2-Outlet
Model Number: HS107
Responsible party:
TP-Link USA Corporation, d/b/a TP-Link North America, Inc.
Address: 145 South State College Blvd. Suite 400, Brea, CA 92821
Website: http://www.tp-link.com/us/
Tel: +1 626 333 0234
Fax: +1 909 527 6803
E-mail: sales.usa@tp-link.com
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.

Consult the dealer or an experienced radio/ TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions:
1）
2）
This device may not cause harmful interference.
This device must accept any interference received, including interference
that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Note: The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void the user’s
authority to operate the equipment.
FCC RF Radiation Exposure Statement:
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This device and its antenna must not be co-located or
operating in conjunction with any other antenna or transmitter.
“To comply with FCC RF exposure compliance requirements, this grant is applicable to
only Mobile Configurations. The antennas used for this transmitter must be installed to
provide a separation distance of at least 20 cm from all persons and must not be
co-located or operating in conjunction with any other antenna or transmitter.”
We, TP-Link USA Corporation, has determined that the equipment shown as above has
been shown to comply with the applicable technical standards, FCC part 15. There is no
unauthorized change is made in the equipment and the equipment is properly maintained
and operated.
Issue Date: 2018/2/2
Canadian Compliance Statement
This device complies with Industry Canada license-exempt RSSs. Operation is subject to
the following two conditions:
1）
2）
This device may not cause interference, and
This device must accept any interference, including interference that may cause
undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils
radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :
1）
2）
l’appareil ne doit pas produire de brouillage;
l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, meme si le
brouillage est susceptible d’en compromettre le fonctionnement.
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance
20cm between the radiator & your body.
Déclaration d'exposition aux radiations:
Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour
un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un
minimum de 20 cm de distance entre la source de rayonnement et votre corps.
Industry Canada Statement
CAN ICES-3 (*)/NMB-3(B)
Safety Information

Keep the device away from water, fire, humidity or hot environments.

Do not attempt to disassemble, repair, or modify the device.

Do not use the device where wireless devices are not allowed.

The socket-outlet shall be installed near the equipment and shall be easily
accessible.

For passthrough devices, plug the power strips into the integrated
electrical sockets of the devices, but devices of the same or another
type not be stacked in normal use.
Please read and follow the above safety information when operating the
device. We cannot guarantee that no accidents or damage will occur due to
improper use of the device. Please use this product with care and operate at
your own risk.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Modify Date                     : 2018:02:02 10:11:47+08:00
Create Date                     : 2018:02:02 10:11:47+08:00
Metadata Date                   : 2018:02:02 10:11:47+08:00
Creator Tool                    : Adobe Acrobat 8.0 Combine Files
Format                          : application/pdf
Document ID                     : uuid:cd2dfece-da7f-4544-8d5a-f26c9d24b08c
Instance ID                     : uuid:2047698a-0aa7-4d54-b0ea-031632cc992b
Producer                        : Adobe PDF library 11.00
Page Count                      : 5
Creator                         : Adobe Acrobat 8.0 Combine Files

EXIF Metadata provided by EXIF.tools