TP Link Technologies HS220 Wi-Fi Smart Dimmer User Manual HS220 Rev 1

TP-Link Technologies Co., Ltd. Wi-Fi Smart Dimmer HS220 Rev 1

User Manual-HS220_Rev 1

Wi-Fi Smart Dimmer www.tp-link.comSTEP 1DOWNLOAD KASAGet the Kasa for Mobile app from the Apple App Store or Google Play.Let’s get started with your new Wi-Fi Smart Dimmer.WELCOME TO KASAKasa• Read and follow all safety precautions in the Kasa app.• Ensure power is o at the circuit breaker before removing or installing any wall switch.• Follow all national and local safety regulations and practices. If you are uncertain or uncomfortable performing the installation, consult a qualied electrician.SAFETY FIRSTTap the button in the Kasa app and select Wi-Fi Smart Dimmer. ADD TO KASASTEP 2Follow app instructions for wiring your new smart switches and connecting them to your Kasa system.INSTALL AND POWER UPSTEP 3
Need some help?www.tp-link.com/support?7106507888 REV1.0.0© 2017 TP-Link. All rights reserved.TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC and 2011/65/EU.The original EU declaration of conformity may be found athttp://www.tp-link.com/en/ce.
This equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to part 15 of the FCC Rules. These limits are designed to providereasonable protection against harmful interference in a residential installation. This equipmentgenerates, uses and can radiate radio frequency energy and, if not installed and used inaccordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. Ifthis equipment does cause harmful interference to radio or television reception, which can bedetermined by turning the equipment off and on, the user is encouraged to try to correct theinterference by one or more of the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that to which the receiveris connected.Consult the dealer or an experienced radio/ TV technician for help.This device complies with part 15 of the FCC Rules. Operation is subject to the following twoconditions:1）This device may not cause harmful interference.2）This device must accept any interference received, including interference thatmay cause undesired operation.Any changes or modifications not expressly approved by the party responsible for compliancecould void the user’s authority to operate the equipment.Note: The manufacturer is not responsible for any radio or TV interference caused byunauthorized modifications to this equipment. Such modifications could void the user’sauthority to operate the equipment.FCC RF Radiation Exposure Statement:This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolledenvironment. This device and its antenna must not be co-located or operating in conjunctionwith any other antenna or transmitter.“To comply with FCC RF exposure compliance requirements, this grant is applicable to onlyMobile Configurations. The antennas used for this transmitter must be installed to provide aseparation distance of at least 20 cm from all persons and must not be co-located oroperating in conjunction with any other antenna or transmitter.”Canadian Compliance StatementThis device complies with Industry Canada license-exempt RSSs. Operation is subject to thefollowing two conditions:
1）This device may not cause interference, and2）This device must accept any interference, including interference that may causeundesired operation of the device.Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareilsradio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :1）l’appareil ne doit pas produire de brouillage;2）l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, meme si lebrouillage est susceptible d’en compromettre le fonctionnement.Radiation Exposure Statement:This equipment complies with IC radiation exposure limits set forth for an uncontrolledenvironment. This equipment should be installed and operated with minimum distance 20cmbetween the radiator & your body.Déclaration d'exposition aux radiations:Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour unenvironnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de20 cm de distance entre la source de rayonnement et votre corps.Industry Canada StatementCAN ICES-3 (B)/NMB-3(B)Safety InformationKeep the device away from water, fire, humidity or hot environments.Do not attempt to disassemble, repair, or modify the device.Do not use the device where wireless devices are not allowed.Please read and follow the above safety information when operating the device.We cannot guarantee that no accidents or damage will occur due to improper useof the device. Please use this product with care and operate at your own risk.Explanation of the symbols on the product labelSymbolExplanationIndoor use only
Protection earth

Navigation menu