TP Link Technologies HS220 Wi-Fi Smart Dimmer User Manual HS220 Rev 1

Download:
Mirror Download [FCC.gov]
Document ID	3712816
Application ID	vppN4p/5KOAQAg10/eq4Jw==
Document Description	User Manual-HS220_Rev 1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	20.93kB (261660 bits)
Date Submitted	2018-01-13 00:00:00
Date Available	2018-01-14 00:00:00
Creation Date	2018-01-03 09:36:25
Producing Software	Adobe PDF library 11.00
Document Lastmod	2018-01-03 09:36:25
Document Title	User Manual-HS220_Rev 1
Document Creator	Adobe Acrobat 8.0 Combine Files

WELCOME TO K ASA
Let’s get started with your new Wi-Fi Smart Dimmer.
Kasa
SAFETY FIRST
• Read and follow all safety precautions in the Kasa app.
• Ensure power is off at the circuit breaker before removing or
installing any wall switch.
• Follow all national and local safety regulations and practices. If
you are uncertain or uncomfortable performing the installation,
consult a qualified electrician.
STEP 1
DOWNLOAD KASA
Get the Kasa for Mobile app from the Apple App
Store or Google Play.
STEP 2
ADD TO KASA
Tap the
button in the Kasa app and select
Wi-Fi Smart Dimmer.
STEP 3
INSTALL AND POWER UP
Follow app instructions for wiring your new smart
switches and connecting them to your Kasa system.
Wi-Fi Smart Dimmer
www.tp-link.com
?
Need some help?
www.tp-link.com/support
TP-Link hereby declares that the device is in compliance with the essential requirements and other
relevant provisions of directives 2014/53/EU, 2009/125/EC and 2011/65/EU.
The original EU declaration of conformity may be found at http://www.tp-link.com/en/ce.
7106507888 REV1.0.0
© 2017 TP-Link. All rights reserved.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.

Consult the dealer or an experienced radio/ TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1）
2）
This device may not cause harmful interference.
This device must accept any interference received, including interference that
may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
Note: The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void the user’s
authority to operate the equipment.
FCC RF Radiation Exposure Statement:
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled
environment. This device and its antenna must not be co-located or operating in conjunction
with any other antenna or transmitter.
“To comply with FCC RF exposure compliance requirements, this grant is applicable to only
Mobile Configurations. The antennas used for this transmitter must be installed to provide a
separation distance of at least 20 cm from all persons and must not be co-located or
operating in conjunction with any other antenna or transmitter.”
Canadian Compliance Statement
This device complies with Industry Canada license-exempt RSSs. Operation is subject to the
following two conditions:
1）
2）
This device may not cause interference, and
This device must accept any interference, including interference that may cause
undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils
radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :
1）
2）
l’appareil ne doit pas produire de brouillage;
l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, meme si le
brouillage est susceptible d’en compromettre le fonctionnement.
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.
Déclaration d'exposition aux radiations:
Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un
environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de
20 cm de distance entre la source de rayonnement et votre corps.
Industry Canada Statement
CAN ICES-3 (B)/NMB-3(B)
Safety Information

Keep the device away from water, fire, humidity or hot environments.

Do not attempt to disassemble, repair, or modify the device.

Do not use the device where wireless devices are not allowed.
Please read and follow the above safety information when operating the device.
We cannot guarantee that no accidents or damage will occur due to improper use
of the device. Please use this product with care and operate at your own risk.
Explanation of the symbols on the product label
Symbol
Explanation
Indoor use only
Protection earth

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Modify Date                     : 2018:01:03 09:36:25+08:00
Create Date                     : 2018:01:03 09:36:25+08:00
Metadata Date                   : 2018:01:03 09:36:25+08:00
Creator Tool                    : Adobe Acrobat 8.0 Combine Files
Format                          : application/pdf
Document ID                     : uuid:5c964413-aefe-4deb-8ffb-4a796b2bae95
Instance ID                     : uuid:57ef0c64-09d8-4951-8b36-2896a19f8c1b
Producer                        : Adobe PDF library 11.00
Page Count                      : 5
Creator                         : Adobe Acrobat 8.0 Combine Files

EXIF Metadata provided by EXIF.tools