TRENDNET TEW445UB 108Mbps 11g wireless USB2.0 Adaptor User Manual UG TEW 445UB v1 0R
TRENDNET, INC. 108Mbps 11g wireless USB2.0 Adaptor UG TEW 445UB v1 0R
TRENDNET >
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 723079 |
| Application ID | MXNyYltGbkUmyi5eb9Nw6w== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 210.46kB (2630783 bits) |
| Date Submitted | 2006-10-31 00:00:00 |
| Date Available | 2006-10-31 00:00:00 |
| Creation Date | 2006-10-04 15:35:13 |
| Producing Software | Acrobat Distiller 7.0 (Windows) |
| Document Lastmod | 2006-10-23 11:05:32 |
| Document Title | Microsoft Word - UG_TEW-445UB_v1.0R_.doc |
| Document Creator | PScript5.dll Version 5.2 |
| Document Author: | wen |
108Mbps 802.11g High Power Wireless USB 2.0 Adapter Table of Contents INTRODUCTION ................................................................................................................... 3 1.1 FEATURES & BENEFITS ............................................................................................................. 3 1.2 PACKAGE CONTENTS ................................................................................................................ 4 1.3 USB ADAPTER DESCRIPTION .................................................................................................... 4 1.4 SYSTEM REQUIREMENTS .......................................................................................................... 4 1.5 APPLICATIONS .......................................................................................................................... 5 1.6 NETWORK CONFIGURATION ...................................................................................................... 6 a) b) Ad hoc (peer-to-peer) Mode .................................................................................................... 6 Infrastructure Mode ................................................................................................................. 7 INSTALL DRIVERS & CLIENT UTILITY.................................................................................. 8 2.1 BEFORE YOU BEGIN ................................................................................................................. 8 2.2 INSTALLING THE DRIVERS ......................................................................................................... 8 USING THE CLIENT UTILITY................................................................................................ 20 3.1 CURRENT STATUS .................................................................................................................. 20 3.2 PROFILE MANAGEMENT .......................................................................................................... 21 3.2.1 Scan for available networks..................................................................................... 22 3.2.2 Create a New Profile................................................................................................ 23 3.2.3 Security .................................................................................................................... 24 3.2.3.1 3.2.3.2 3.2.3.3 3.2.3.4 3.2.3.5 3.2.3.6 3.2.3.7 3.2.3.8 3.2.3.9 3.2.3.10 3.2.3.11 3.2.3.12 3.2.3.13 3.2.4 Security Disabled..........................................................................................................24 WPA / WPA2– TLS, TTLS.............................................................................................25 WPA/WPA2 – PEAP (EAP-GTC) ..................................................................................27 WPA/WPA2 – PEAP (EAP-MSCHAP-V2).....................................................................29 WPA/WPA2 – LEAP......................................................................................................31 WPA/WPA2 – EAP-FAST..............................................................................................32 WPA/WPA2 – Passphrase ............................................................................................34 802.1x – TLS, TTLS......................................................................................................34 802.1x – PEAP (EAP-GTC) ..........................................................................................36 802.1x – PEAP (EAP-MSCHAP-V2).............................................................................38 802.1x – LEAP..............................................................................................................40 802.1x – EAP-FAST......................................................................................................42 Pre-Shared Key (Static WEP).......................................................................................44 Advanced Settings ................................................................................................... 46 3.2.4.1 3.2.4.2 Infrastructure Settings...................................................................................................46 Ad Hoc Settings............................................................................................................47 3.3 DIAGNOSTICS ......................................................................................................................... 48 3.4 ENABLE / DISABLE RADIO ....................................................................................................... 50 3.5 DISABLE TRAY ICON ............................................................................................................... 52 3.6 DISPLAY SETTINGS ................................................................................................................. 52 UNINSTALL THE DRIVERS & CLIENT UTILITY .................................................................. 54 APPENDIX A – SPECIFICATIONS............................................................................................... 56 APPENDIX B – FCC INTERFERENCE STATEMENT ................................................................. 57 108Mbps 802.11g High Power Wireless USB 2.0 Adapter 1 Introduction This 108Mbps 802.11g High-Gain Wireless USB Adapter supports the IEEE 802.11b/g (2.4GHz) protocol. It provides a high-speed wireless connection with data rates up to 108Mbps. To protect your wireless connectivity, the high-speed wireless USB adapter supports 64/128/152-bit WEP data encryption and WPA. Dynamic Frequency Selection (DFS) puts your network on the clearest channel in your location. With this high-speed wireless USB adapter, you will experience the best wireless connectivity available. This chapter describes the features & benefits, package contents, applications, and network configuration. 1.1 Features & Benefits Features Benefits High Speed Data Rate up to 108 Mbps in Capable of handling heavy data payloads Super G mode such as MPEG video streaming. High Output Power up to 23 dBm A higher power output can increase the range. Advanced Encryption Standard (AES), Powerful data security. Temporal Key Integrity Protocol (TKIP) and Wired Equivalent Privacy (WEP) IEEE 802.1x Client Support Enhances authentication and security. Support for 802.11e standard Wireless Multimedia Enhancements Quality of Service support (QoS) Advanced Power Management Low power consumption in power saving mode up to 98%. Support eXtended Range technology eXtended Range technology provides Wi-Fi products twice the range of existing designs 108Mbps 802.11g High Power Wireless USB 2.0 Adapter 1.2 Package Contents Open the package carefully, and make sure that none of the items listed below are missing. Do not discard the packing materials, in case you need to return the product return. The unit must be returned in its original package. One Wireless LAN USB Adapter One USB Cable (Type A to Mini B) One 2dBi Detachable Antenna One Driver and Utility CD-ROM with User’s Manual Included One Quick Installation Guide 1.3 USB Adapter Description This wireless USB adapter fits into your computer’s USB 1.1 or 2.0 port. The USB adapter has a LED indicator and an external high-sensitivity dipole antenna. High-sensitivity Dipole Antenna LED Indicator: Ad hoc Mode: Solid Green, whether the wireless is connected or not. Infrastructure Mode: Solid green while connected, and blinking during activity. USB port 1.4 System Requirements The following are the minimum system requirements in order to use the USB adapter. h PC/AT compatible computer with a USB 1.1 or 2.0 interface. h Windows 2000/XP operating system. h 20 MB of free disk space for installing the USB adapter driver and utility program. h CD-ROM Drive h CPU: 300MHz or above h Memory: 32MB or above 108Mbps 802.11g High Power Wireless USB 2.0 Adapter 1.5 Applications . The following list describes some of the many applications made possible through the power and flexibility of wireless LANs: a) Difficult-to-wire environments There are many situations where wires cannot be easily installed. Historic buildings, older buildings, open areas and across busy streets make the installation of LANs either impossible or very expensive. b) Temporary workgroups Consider situations in parks, athletic arenas, exhibition centers, disasterrecovery, temporary offices and construction sites where one wants a temporary WLAN established and removed. c) The ability to access real-time information Doctors/nurses, point-of-sale employees, and warehouse workers can access real-time information while dealing with patients, serving customers and processing information. d) Dynamic environments Show rooms, meeting rooms, retail stores, and manufacturing sites where the workplace is frequently rearranged. e) Small Office and Home Office (SOHO) networks SOHO users need a cost-effective, easy–to-install network. f) Wireless extensions to Ethernet networks Network managers in dynamic environments can minimize the overhead caused by moves, extensions to networks, and other changes with wireless LANs. g) Wired LAN backup Network managers implement wireless LANs to provide backup for mission-critical applications running on wired networks. 108Mbps 802.11g High Power Wireless USB 2.0 Adapter 1.6 Network Configuration To better understand how wireless devices work together to create a wireless network, it might be helpful to depict a few of the possible wireless network configurations. Wireless devices can be configured as: a) Ad hoc (or peer-to-peer) b) Infrastructure a) Ad hoc (peer-to-peer) Mode In ad hoc mode, each client is peer-to-peer. The client would only have access to the resources of the other client. Ad hoc mode does not require an access point. This is the easiest and least expensive way for the SOHO to set up a wireless network. The image above depicts a network in Ad hoc mode. 108Mbps 802.11g High Power Wireless USB 2.0 Adapter b) Infrastructure Mode Infrastructure mode requires the use of an access point (AP). In this mode, all wireless communication between clients passes through an AP. It doesn’t matter if the AP is stand-alone or wired to an Ethernet network. If used in stand-alone, the AP can extend the range of independent wireless LANs by acting as a repeater. The image below depicts a network in infrastructure mode. 108Mbps 802.11g High Power Wireless USB 2.0 Adapter 2 Install Drivers & Client Utility 2.1 Before You Begin Before installing your wireless USB adapter, you need to remove all Wireless LAN drivers that you have previously installed. During the installation, Windows XP/2K/ME/98 may need to copy systems files from its installation CD. Therefore, you may need a copy of the Windows installation CD at hand before installing the drivers. On many systems, instead of a CD, the necessary installation files are archived on the hard disk in C:\WINDOWS \OPTIONS\CABS directory. 2.2 Installing the Drivers Windows XP/2000 Follow the steps below in order to install the USB adapter drivers: 1. Insert the provided CD-ROM into your CD-ROM drive. The autorun screen will appear. 2. Click Install Utility & Driver and then click Windows 2000/XP. 108Mbps 802.11g High Power Wireless USB 2.0 Adapter 3. Click Run. 4. Click Run. 5. Click Next to continue. 108Mbps 802.11g High Power Wireless USB 2.0 Adapter 6. Select Install Client Utilities and Driver and then click Next. 7. This message informs you that the system must be restarted after the installation is complete. Click Yes to continue. 10 108Mbps 802.11g High Power Wireless USB 2.0 Adapter 8. Click on the Browse button to select another drive or folder to install the drivers, and then click Next. If you would like to use the default destination folder, click Next. 9. Select a program folder for the Start menu, or use the default setting: WLAN. Click Next to continue. 11 108Mbps 802.11g High Power Wireless USB 2.0 Adapter 10. The message below informs you about configuring this device through the 802.11 Client Utility (ACU) or a third party supplicant. If you choose to use a third party supplicant, some of the ACU features will not be available. Click Next to continue. 12 108Mbps 802.11g High Power Wireless USB 2.0 Adapter 11. Select one of the options. It is recommended that you select the first option: WLAN Client Utility (ACU) and Supplicant. Click Next to continue. 12. When you reach the screen below, plug in the provided USB cable into the TEW-445UB and into an available USB plug on your computer. Cancel the Found New Hardware Wizard and then click OK. 13. If you are using Windows XP, you will see a message regarding Windows Logo Testing, click on the Continue Anyway button to continue. 13 108Mbps 802.11g High Power Wireless USB 2.0 Adapter 14. If you are using Windows 2000, a Digital Signature Not Found window appears. Click Yes to continue the installation. 15. Select Yes, I want to restart my computer now and then click Finish. 14 108Mbps 802.11g High Power Wireless USB 2.0 Adapter Windows ME/98SE Follow the steps below in order to install the USB adapter drivers: 1. Insert the provided CD-ROM into your CD-ROM drive. The autorun screen will appear. 2. Click Install Utility & Driver and then click Windows 98/ME. 3. Select Run this program from its current location and then click OK. 15 108Mbps 802.11g High Power Wireless USB 2.0 Adapter 4. Click Yes. 5. Remove the USB adapter from the USB port if it is inserted and then click OK. 6. Click Next to continue. 16 108Mbps 802.11g High Power Wireless USB 2.0 Adapter 7. Select Install Client Utilities and Driver and then click Next. 17 108Mbps 802.11g High Power Wireless USB 2.0 Adapter 8. This message informs you that the system must be restarted after the installation is complete. Click Yes to continue. 9. Click on the Browse button to select another drive or folder to install the drivers, and then click Next. If you would like to use the default destination folder, click Next. 10. . Click Next to continue. 18 108Mbps 802.11g High Power Wireless USB 2.0 Adapter 11. When you reach the screen below, plug in the provided USB cable into the TEW-445UB and into an available USB port on your computer. Cancel the Found New Hardware Wizard and then click OK. 12. Click OK to reboot the computer. 19 108Mbps 802.11g High Power Wireless USB 2.0 Adapter 3 Using the Client Utility You will see the Wireless Client Utility icon on your desktop. Double click this icon to open up the utility program. 3.1 Current Status The Current Status tab displays the current status of the wireless radio. The following information is included in this tab: Profile Name: Displays the name of this profile. One device can have many profiles, but only one profile can be loaded at a time. Note: The profile name and network name (SSID) are not the same. Link Status: This indicates the state of the client; associated or not associated. Wireless Mode: Displays the 802.11 mode (e.g. “2.4GHz 11 Mbps”, “2.4GHz 54 Mbps”, “2.4GHz 108Mbps”). Network Type: Displays the type of network (e.g. “Infrastructure” or “Ad hoc”). Server Based Authentication: Displays information about the authentication method. IP address: Displays the IP address assigned to this device. Current Channel: Displays the channel of the access point the device is 20 108Mbps 802.11g High Power Wireless USB 2.0 Adapter connected to. h Data Encryption: Displays the type of encryption used. h Signal Strength: Displays the strength of the wireless connection. Click on the Advanced button to display more details about the current status. This window includes information such as: Network Name (SSID), AP MAC address, Power Save Mode, Signal Strength, Noise Level, Channel, Frequency, and Channel Set (country). Click OK to close the window. 3.2 Profile Management This tab is used to create a new profile, modify an existing profile, remove an existing profile and activate an existing profile. 21 108Mbps 802.11g High Power Wireless USB 2.0 Adapter 3.2.1 Scan for available networks Click on the Scan button to view a list of available infrastructure and ad hoc networks. This table lists the Network Name, Encryption Key (if required), Signal Strength, Channel, and Wireless Mode. If you would like to associate with a specific network, select the network name (SSID) and then click on the Activate button. 22 108Mbps 802.11g High Power Wireless USB 2.0 Adapter 3.2.2 Create a New Profile Multiple profiles can be created for different Network Names (SSIDs). This allows a user to quickly associate with another network, instead of entering the SSID each time. Click on the New button to create a new profile. The window below appears: Profile Name: Enter a name for this profile; this can be any name that 23 108Mbps 802.11g High Power Wireless USB 2.0 Adapter you may associate with your network. This feature comes in handy when you need to work at several locations where there are different network settings. Using this you can configure a different profile for each of your networks. Client Name: Enter any name to describe the profile. SSID1: Enter the SSID of the network. The SSID is a unique name shared among all points in your wireless network. The SSID must be identical for all points in the network, and is case-sensitive. Click OK to continue. 3.2.3 Security The next tab displayed is the Security tab. Here you can configure the authentication and encryption method that is used on your network. There are five types of security methods available: none, WPA, WPA-PSK, 802.1x and Preshared WEP key. The configuration steps for each method are described below. 3.2.3.1 Security Disabled If your network does not require any encryption key, then select None in the security tab, and then click OK. 24 108Mbps 802.11g High Power Wireless USB 2.0 Adapter 3.2.3.2 WPA / WPA2– TLS, TTLS WPA2 (Wi-Fi Protected Access 2) provides network administrators with a high level of assurance that only authorized users can access the network. WPA (WiFi Protected Access) was designed to improve upon the security features of WEP (Wired Equivalent Privacy). The technology is designed to work with existing WiFi products that have been enabled with WEP. WPA provides improved data encryption through the Temporal Integrity Protocol (TKIP), which scrambles the keys using a hashing algorithm and by adding an integrity-checking feature which makes sure that keys haven’t been tampered with. Select the WPA/WPA2 radio button, and then select EAP – TLS or EAP – TTLS from the drop-down list. TLS (Transport Layer Security) is an IETF standardized authentication protocol that uses PKI (Public Key Infrastructure) certificate-based authentication of both the client and authentication server. Click Configure to configure the TTLS settings. 25 108Mbps 802.11g High Power Wireless USB 2.0 Adapter Trusted Root Certification Authorities: Select the appropriate certificate authority from the drop-down list. User Name: Enter the user name for the certificate authority. Password: Enter the password that corresponds with the user name for the certificate authority. Confirm Password: Retype the password. Click Settings. Specific Server or Domain: Leave the server name blank for the client to accept a certificate from any server with a certificate signed by the authority listed in the Trusted Root Certification Authorities drop-down list. (Recommended). You can also enter the domain name of the server from which the client will accept a certificate. Login Name: Enter the login name if required. Click OK to return to the previous window. Click OK again to return to the Profile Management window. 26 108Mbps 802.11g High Power Wireless USB 2.0 Adapter 3.2.3.3 WPA/WPA2 – PEAP (EAP-GTC) PEAP (EAP-GTC) was standardized along with EAP in RFC 2284. EAP-GTC allows the exchange of clear text authentication credentials across the network. The GTC method does provide a way to move a simple username and password from client to server using an EAP method, so it can be used to provide an authentication method. Naturally, if EAP-GTC is used to transport reusable passwords, it must be used inside a tunnel for protection and server authentication. EAP-GTC can be used with both TTLS and PEAP. Select the WPA/WPA2 radio button, and then select PEAP (EAP-GTC) from the drop-down list. Click Configure to configure the PEAP (EAP-GTC) settings. 27 108Mbps 802.11g High Power Wireless USB 2.0 Adapter Trusted Root Certification Authorities: Select the appropriate certificate authority from the drop-down list. . Set Password: Select Token or Static Password radio button. The default setting is Static Password. User Name: Enter the user name for the certificate authority Password: Enter the password that corresponds with the user name for the certificate authority. Confirm Password: Retype the password. Click Settings. Specific Server or Domain: Leave the server name blank for the client to accept a certificate from any server with a certificate signed by the authority listed in the Trusted Root Certification Authorities drop-down list. (Recommended). You can also enter the domain name of the server 28 108Mbps 802.11g High Power Wireless USB 2.0 Adapter from which the client will accept a certificate. Login Name: Enter the login name if required. Click OK to return to the previous window. Click OK again to return to the Profile Management window. 3.2.3.4 WPA/WPA2 – PEAP (EAP-MSCHAP-V2) The PEAP (EAP-MSCHAP V2) authentication type is based on EAPTLS authentication, but uses a password instead of a client certificate for authentication. PEAP (EAP-MSCHAP V2) uses a dynamic session-based WEP key, which is derived from the device and RADIUS server, to encrypt data. Select the WPA/WPA2 radio button, and then select PEAP (EAP-MSCHAP-V2) from the drop-down list. Click Configure to configure the PEAP (EAP-MSCHAP-V2) settings. 29 108Mbps 802.11g High Power Wireless USB 2.0 Adapter Trusted Root Certification Authorities: Select the appropriate certificate authority from the drop-down list. User Name: Enter the user name for the certificate authority. Password: Enter the password that corresponds with the user name for the certificate authority. Confirm Password: Retype the password. Click Settings. Specific Server or Domain: Leave the server name blank for the client to accept a certificate from any server with a certificate signed by the authority listed in the Trusted Root Certification Authorities drop-down list. (Recommended). You can also enter the domain name of the server from which the client will accept a certificate. Login Name: Enter the login name if required. Click OK to return to the previous window. Click OK again to return to the Profile Management window. 30 108Mbps 802.11g High Power Wireless USB 2.0 Adapter 3.2.3.5 WPA/WPA2 – LEAP LEAP (Lightweight Extensible Authentication Protocol) also known as CiscoWireless EAP provides username/password-based authentication between a wireless client and a RADIUS server. LEAP is one of several protocols used with the IEEE 802.1X standard for LAN port access control. LEAP also delivers a session key to the authenticated station, so that future frames can be encrypted with a key that is different than keys used by others sessions. Dynamic key delivery eliminates one big vulnerability; static encryption keys that are shared by all stations in the WLAN. Select the WPA/WPA2 radio button, and select LEAP from the drop-down list. Click Configure to configure the LEAP settings. 31 108Mbps 802.11g High Power Wireless USB 2.0 Adapter Use Temporary User Name and Password: Select this radio button for a temporary user name and password. This will manually prompt for the user name and password. Use Saved User Name Password: Select this radio button if the user name and password will be saved in this profile. User Name: Enter the user name for the certificate authority. Password: Enter the password that corresponds with the user name for the certificate authority. Confirm Password: Retype the password. Click OK to return to the previous window. 3.2.3.6 WPA/WPA2 – EAP-FAST EAP-FAST allows customers who cannot enforce a strong password policy to deploy EAP authentication that does not require digital certificates. This method supports a variety of user and password database types and password expiration and change. It is flexible, easy to deploy, and easy to manage. For example, a customer using Cisco LEAP who cannot enforce a strong password policy and does not want to use certificates can migrate to EAP-FAST for protection from dictionary attacks. (See help menu on configuration utility for more details) 32 108Mbps 802.11g High Power Wireless USB 2.0 Adapter Click Configure to configure the EAP-Fast settings Use Temporary User Name and Password: Selecting this option will manually prompt for the user name and password. Use Saved User Name Password: Select this radio button if the user name and password will be saved in this profile. User Name: Enter the user name for the certificate authority. Password: Enter the password that corresponds with the user name for the certificate authority. Confirm Password: Retype the password. Click OK to return to the previous window. 33 108Mbps 802.11g High Power Wireless USB 2.0 Adapter 3.2.3.7 WPA/WPA2 – Passphrase Select the WPA/WPA2 Passphrase radio button and then click Configure. Enter a WPA/WPA2 passphrase. For ASCII text, enter 8-63 characters, for hexadecimal enter 64 characters). Click OK to return to the previous window. Click OK again to return to the Profile Management window. 3.2.3.8 802.1x – TLS, TTLS 802.1X provides an authentication framework for wireless LANs allowing a user to be authenticated by a central authority. 802.1X uses an existing protocol called EAP. EAP (Extensible Authentication Protocol) is an extension to the PPP protocol that enables a variety of authentication protocols to be used. It passes through the exchange of authentication messages, allowing the authentication 34 108Mbps 802.11g High Power Wireless USB 2.0 Adapter software stored in a server to interact with its counterpart in the client. Select the 802.1x radio button, and then select EAP – TLS or EAP – TTLS from the drop-down list. TLS (Transport Layer Security) is an IETF standardized authentication protocol that uses PKI (Public Key Infrastructure) certificatebased authentication of both the client and authentication server. Click Configure to configure the TTLS settings. 35 108Mbps 802.11g High Power Wireless USB 2.0 Adapter Trusted Root Certification Authorities: Select the appropriate certificate authority from the drop-down list. User Name: Enter the user name for the certificate authority. Password: Enter the password that corresponds with the user name for the certificate authority. Confirm Password: Retype the password. Click Settings. Specific Server or Domain: Leave the server name blank for the client to accept a certificate from any server with a certificate signed by the authority listed in the Trusted Root Certification Authorities drop-down list (Recommended). You can also enter the domain name of the server from which the client will accept a certificate. Login Name: Enter the login name if required. Click OK to return to the previous window. Click OK again to return to the Profile Management window. 3.2.3.9 802.1x – PEAP (EAP-GTC) PEAP (EAP-GTC) was standardized along with EAP in RFC 2284. EAP-GTC allows the exchange of clear text authentication credentials across the network. The GTC method does provide a way to move a simple username and password from client to server using an EAP method, so it can be used to provide an authentication method. If EAP-GTC is used to transport reusable passwords, it must be used inside a tunnel for protection and server authentication. EAP-GTC can be used with both TTLS and PEAP. Select the 802.1x radio button, and then select PEAP (EAP-GTC) from the dropdown list. 36 108Mbps 802.11g High Power Wireless USB 2.0 Adapter Click Configure to configure the PEAP (EAP-GTC) settings. Trusted Root Certification Authorities: Select the appropriate certificate authority from the drop-down list. 37 108Mbps 802.11g High Power Wireless USB 2.0 Adapter User Name: Enter the user name for the certificate authority. Set Password: Select Token or Static Password radio button. The default setting is Static Password. Click Settings. Specific Server or Domain: Leave the server name blank for the client to accept a certificate from any server with a certificate signed by the authority listed in the Trusted Root Certification Authorities drop-down list. (Recommended). You can also enter the domain name of the server from which the client will accept a certificate. Login Name: Enter the login name if required. Click OK to return to the previous window. Click OK again to return to the Profile Management window. 3.2.3.10 802.1x – PEAP (EAP-MSCHAP-V2) The PEAP (EAP-MSCHAP V2) authentication type is based on EAPTLS authentication, but uses a password instead of a client certificate for authentication. PEAP (EAP-MSCHAP V2) uses a dynamic session-based WEP key, which is derived from the device and RADIUS server, to encrypt data. Select the 802.1x radio button, and then select PEAP (EAP-MSCHAP-V2) from the drop-down list. 38 108Mbps 802.11g High Power Wireless USB 2.0 Adapter Click Configure to configure the PEAP (EAP-MSCHAP-V2) settings. Trusted Root Certification Authorities: Select the appropriate certificate authority from the drop-down list. User Name: Enter the user name for the certificate authority. Password: Enter the password that corresponds with the user name for the certificate authority. Confirm Password: Retype the password. 39 108Mbps 802.11g High Power Wireless USB 2.0 Adapter Click Settings. Specific Server or Domain: Leave the server name blank for the client to accept a certificate from any server with a certificate signed by the authority listed in the Trusted Root Certification Authorities drop-down list. (Recommended). You can also enter the domain name of the server from which the client will accept a certificate. Login Name: Enter the login name if required. Click OK to return to the previous window. Click OK again to return to the Profile Management window. 3.2.3.11 802.1x – LEAP LEAP (Lightweight Extensible Authentication Protocol) also known as CiscoWireless EAP provides username/password-based authentication between a wireless client and a RADIUS server. LEAP is one of several protocols used with the IEEE 802.1X standard for LAN port access control. LEAP also delivers a session key to the authenticated station, so that future frames can be encrypted with a key that is different than keys used by others sessions. Dynamic key delivery eliminates one big vulnerability; static encryption keys that are shared by all stations in the WLAN. Select the 802.1x radio button, and then select LEAP from the drop-down list. 40 108Mbps 802.11g High Power Wireless USB 2.0 Adapter Click Configure to configure the LEAP settings. 41 108Mbps 802.11g High Power Wireless USB 2.0 Adapter Use Temporary User Name and Password: Selecting this option will manually prompt for the user name and password. Use Saved User Name Password: Select this radio button if the user name and password will be saved in this profile. User Name: Enter the user name for the certificate authority. Password: Enter the password that corresponds with the user name for the certificate authority. Confirm Password: Retype the password. Click OK to return to the previous window. 3.2.3.12 802.1x – EAP-FAST EAP-FAST allows customers who cannot enforce a strong password policy to deploy an 802.1X EAP type that does not require digital certificates. This method supports a variety of user and password database types and password expiration and change. It is flexible, easy to deploy, and easy to manage. For example, a customer using Cisco LEAP who cannot enforce a strong password policy and does not want to use certificates can migrate to EAP-FAST for protection from dictionary attacks. (See help menu on configuration utility for more details) 42 108Mbps 802.11g High Power Wireless USB 2.0 Adapter Use Temporary User Name and Password: Selecting this option will manually prompt for the user name and password. Use Saved User Name Password: Select this radio button if the user name and password will be saved in this profile. User Name: Enter the user name for the certificate authority. Password: Enter the password that corresponds with the user name for the certificate authority. Confirm Password: Retype the password. 43 108Mbps 802.11g High Power Wireless USB 2.0 Adapter Click OK to return to the previous window. 3.2.3.13 Pre-Shared Key (Static WEP) You may select 64, 128 or 152 bit WEP (Wired Equivalent Privacy) key to encrypt data (Default setting is Disable). WEP encrypts each frame transmitted from the radio using one of the Keys from the panel. When you use WEP to communicate with the other wireless clients, all the wireless devices in this network must have the same encryption key or pass phrase. 44 108Mbps 802.11g High Power Wireless USB 2.0 Adapter Select the Pre-Shared Key (Static WEP) radio button and click Configure. Key Entry: Select Hexadecimal or ASCII depending on the WEP key that is used. WEP Key Size: Select 64, 128, or 152 bit WEP key size. Transmit Key: Enter the WEP key in the four WEP key text boxes. Click OK to return to the previous window. 45 108Mbps 802.11g High Power Wireless USB 2.0 Adapter 3.2.4 Advanced Settings Click on the Advanced tab in the Profile Management section. Here you can configure the wireless mode, power save mode, and network type. 3.2.4.1 Infrastructure Settings Wireless Mode: Place a check in the preferred frequency and data rate. Power Save Mode: Select Maximum, Normal, or Off from the dropdown list. Selecting Maximum will save the most power. This is recommended if using a laptop running on battery. Network Type: Select Infrastructure from the dropdown list if the wireless client is connecting to an access point. 802.11b Preamble: This setting should be the same as the access point. If you are not sure of that setting, select Short & Long. Preferred APs: Click on this button to add specific access points to this profile. Then enter the MAC addresses of the specific access points and then click OK to return to the previous window. 46 108Mbps 802.11g High Power Wireless USB 2.0 Adapter 3.2.4.2 Ad Hoc Settings Wireless Mode: Place a check next to the preferred frequency and data rates. Network Type: Select Ad hoc from the drop-down list if the wireless client is connecting to another wireless client 802.11b Preamble: This setting should be the same as the other wireless client. If you are not sure of that setting, select Short & Long. Click OK to return to the previous window. 47 108Mbps 802.11g High Power Wireless USB 2.0 Adapter 3.3 Diagnostics The third tab displayed is the Diagnostics tab. This tab displays the number of transmitted and received packets. Click on Adapter Information to view information about the wireless USB adapter (e.g. Card Name, MAC address, Driver, Driver Version and Driver Date). Click OK to return to the previous window Click Advanced Statistics to view detailed statistics about transmit and receive frames. 48 108Mbps 802.11g High Power Wireless USB 2.0 Adapter Click OK to return to the previous window 49 108Mbps 802.11g High Power Wireless USB 2.0 Adapter 3.4 Enable / Disable Radio To disable the radio, click on Action in the menu bar, and then click on Disable Radio. You will then see a confirmation message “The RF signals for the following network card(s) have been successfully disabled”. Click OK to continue. 50 108Mbps 802.11g High Power Wireless USB 2.0 Adapter To enable the radio, click on Action in the menu bar, and then click on Enable Radio. You will then see a confirmation message “The RF signals for the following network card(s) have been successfully enabled”. Click OK to continue. 51 108Mbps 802.11g High Power Wireless USB 2.0 Adapter 3.5 Disable Tray Icon To disable the tray icon, click on Action in the menu bar, and then click on Disable Tray Icon. You will then notice that the tray icon has disappeared from the system tray. 3.6 Display Settings To change the display settings, click on Options in the menu bar, and then click on Display Settings. 52 108Mbps 802.11g High Power Wireless USB 2.0 Adapter In this window you can change the Signal Strength Display Units from dBm to %, and increase or decrease the refresh interval rate. You can also display date in a cumulative or relative format. Click OK to return to the previous window. 53 108Mbps 802.11g High Power Wireless USB 2.0 Adapter 4 Uninstall the Drivers & Client Utility If the device installation is unsuccessful for any reason, the best way to solve the problem is to completely uninstall the device and its utility and repeat the installation procedure again. Follow the steps below in order to uninstall the Drivers and Client Utility: 1. Click on Start > Settings > Control Panel > Add or Remove Programs 2. You will then see the following window. Select the TRENDnet TEW-445UB Wireless Client Utility and then click Remove. 3. Select Uninstall the previous installation radio button. Then click Next. 54 108Mbps 802.11g High Power Wireless USB 2.0 Adapter 4. Click OK. 5. Click Yes. 6. Remove the device from your computer and then click OK. 55 108Mbps 802.11g High Power Wireless USB 2.0 Adapter Appendix A – Specifications Data Rates 802.11g: 6, 9, 12, 18, 24, 36, 48, 54, 72, 96 & 108 (Super G) Mbps 802.11b: 1, 2, 5.5, 11Mbps Standards / Compliance IEEE802.11, IEEE802.11g, IEEE802.11b, draft IEEE 802.11e, and i standards, IEEE802.1x Regulation Certifications FCC Part 15/UL, ETSI 300/328/CE Operating Voltage 5 V ± 0.25V Status LEDs RF link activity Drivers Windows XP/2K/ME/98 RF Information Frequency Band U.S., Europe and Japan product covering 2.4 to 2.484 GHz, programmable for different country regulations Media Access Protocol Carrier Sense Multiple Access with Collision Avoidance (CSMA/CA) Modulation Technology 802.11g: OFDM (64-QAM, 16-QAM, QPSK, BPSK) 802.11b: DSSS (DBPSK, DQPSK, CCK) Operating Channels 11 for North America, 13 for Europe and Japan Receive Sensitivity (Typical) z 2.412~2.472G(IEEE802.11g) 6Mbps@ -91dBm; 54Mbps@ -76dBm z 2.412~2.472G(IEEE802.11b) 11Mbps@ -91dBm; 1Mbps@ -96dBm Available transmit power FCC z 2.412~2.462G(IEEE802.11g) 22 dBm @ 6 ~ 24 Mbps 21 dBm @ 36 Mbps 20 dBm @ 48 Mbps 19 dBm @ 54 Mbps z 2.412~2.462G(IEEE802.11b) 21 dBm @1~11Mbps ETSI z 2.412~2.472G(IEEE802.11g) 20 dBm @ 6 ~ 24 Mbps 20 dBm @ 36 Mbps 20 dBm @ 48 Mbps 19 dBm @ 54 Mbps z 2.412~2.472G(IEEE802.11b) 20 dBm @1~11Mbps Antenna Detachable Dipole antenna (2dBi Gain) Networking Topology Ad hoc, Infrastructure Security IEEE802.1x support for LEAP/PEAP WEP 64,128,152bit WPA (PSK, TKIP) WPA2 (AES) Physical Form Factor USB 2.0 Dimensions 75.2(L) mm x 53.9(W) mm x 14(H) mm Weight 40 g/ 1.5oz Environmental Temperature Range Operating: -0°C to 55°C Storage: -20°Cto 75°C Humidity (non-condensing) 5%~95% Typical Package Contents One USB Adapter One USB Cable (Type A to Mini B) One CD-ROM with User’s Manual and Drivers One Quick Installation Guide One 2dBi Detachable Antenna 56 108Mbps 802.11g High Power Wireless USB 2.0 Adapter Appendix B – FCC Interference Statement Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and radiates radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures: 1. Reorient or relocate the receiving antenna. 2. Increase the distance between the equipment and the receiver. 3. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. 4. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This device complies with FCC RF Exposure limits set forth for an uncontrolled environment, under 47 CFR 2.1093 paragraph (d) (2). This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. IEEE 802.11b or 802.11g operation of this product in the U.S.A. is firmware-limited to channels 1 - 11. 57 108Mbps 802.11g High Power Wireless USB 2.0 Adapter Limited Warranty TRENDnet warrants its products against defects in material and workmanship, under normal use and service, for the following lengths of time from the date of purchase. TEW-445UB Three years If a product does not operate as warranted above during the applicable warranty period, TRENDnet shall, at its option and expense, repair the defective product or deliver to customer an equivalent product to replace the defective item. All products that are replaced will become the property of TRENDnet. Replacement products may be new or reconditioned. TRENDnet shall not be responsible for any software, firmware, information, or memory data of customer contained in, stored on, or integrated with any products returned to TRENDnet pursuant to any warranty. There are no user serviceable parts inside the product. Do not remove or attempt to service the product through any unauthorized service center. This warranty is voided if (i) the product has been modified or repaired by any unauthorized service center, (ii) the product was subject to accident, abuse, or improper use (iii) the product was subject to conditions more severe than those specified in the manual. Warranty service may be obtained by contacting TRENDnet office within the applicable warranty period for a Return Material Authorization (RMA) number, accompanied by a copy of the dated proof of the purchase. Products returned to TRENDnet must be pre-authorized by TRENDnet with RMA number marked on the outside of the package, and sent prepaid, insured and packaged appropriately for safe shipment. WARRANTIES EXCLUSIVE: IF THE TRENDNET PRODUCT DOES NOT OPERATE AS WARRANTED ABOVE, THE CUSTOMER’S SOLE REMEDY SHALL BE, AT TRENDNET’S OPTION, REPAIR OR REPLACEMENT. THE FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, EITHER IN FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. TRENDNET NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT ANY OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE OR USE OF TRENDNET’S PRODUCTS. TRENDNET SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND EXAMINATION DISCLOSE THAT THE ALLEGED DEFECT IN THE PRODUCT DOES NOT EXIST OR WAS CAUSED BY CUSTOMER’S OR ANY THIRD PERSON’S MISUSE, NEGLECT, IMPROPER INSTALLATION OR TESTING, UNAUTHORIZED ATTEMPTS TO REPAIR OR MODIFY, OR ANY OTHER CAUSE BEYOND THE RANGE OF THE INTENDED USE, OR BY ACCIDENT, FIRE, LIGHTNING, OR OTHER HAZARD. LIMITATION OF LIABILITY: TO THE FULL EXTENT ALLOWED BY LAW TRENDNET ALSO 58 108Mbps 802.11g High Power Wireless USB 2.0 Adapter EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY LIABILITY, WHETHER BASED IN CONTRACT OR TORT (INCLUDING NEGLIGENCE), FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND, OR FOR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR DATE, OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE, USE, PERFORMANCE, FAILURE, OR INTERRUPTION OF THE POSSIBILITY OF SUCH DAMAGES, AND LIMITS ITS LIABILITY TO REPAIR, REPLACEMENT, OR REFUND OF THE PURCHASE PRICE PAID, AT TRENDNET’S OPTION. THIS DISCLAIMER OF LIABILITY FOR DAMAGES WILL NOT BE AFFECTED IF ANY REMEDY PROVIDED HEREIN SHALL FAIL OF ITS ESSENTIAL PURPOSE. Governing Law: This Limited Warranty shall be governed by the laws of the state of California. Note: AC/DC Power Adapter, Cooling Fan, and Power Supply carry 1-Year Warranty 59 108Mbps 802.11g High Power Wireless USB 2.0 Adapter 60
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Encryption : Standard V1.2 (40-bit) User Access : Print, Fill forms, Extract, Assemble, Print high-res Create Date : 2006:10:04 15:35:13-07:00 Modify Date : 2006:10:23 11:05:32+08:00 Producer : Acrobat Distiller 7.0 (Windows) Creation Date : 2006:10:04 15:35:13-07:00 Mod Date : 2006:10:23 11:05:32+08:00 Author : wen Creator Tool : PScript5.dll Version 5.2 Metadata Date : 2006:10:23 11:05:32+08:00 Document ID : uuid:8ecf815d-d420-4e3f-ad4f-db9184b876fe Instance ID : uuid:5ef5e77b-b6c7-43e4-a723-747fe6ef156a Format : application/pdf Title : Microsoft Word - UG_TEW-445UB_v1.0R_.doc Creator : wen Page Count : 60 Has XFA : NoEXIF Metadata provided by EXIF.tools