TRENDNET TEW711BRV2 N150 Wireless Home Router User Manual test 3

Download:
Mirror Download [FCC.gov]
Document ID	2209814
Application ID	M0Z/Mpv1OrHX99J4BHB8Nw==
Document Description	User Manual.pdf
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	101.47kB (1268360 bits)
Date Submitted	2014-03-07 00:00:00
Date Available	2014-03-07 00:00:00
Creation Date	2013-01-11 10:16:21
Producing Software	Adobe PDF Library 10.0
Document Lastmod	2014-03-03 20:23:53
Document Title	test 3
Document Creator	Acrobat PDFMaker 10.1 for Word
Document Author:	Jonathan

TRENDnet User’s Guide
Cover Page
TRENDnet User’s Guide
Contents
Product Overview ...........................................................................1
Package Contents .......................................................................................................... 1
Features ......................................................................................................................... 1
Product Hardware Features........................................................................................... 2
Application Diagram ...................................................................................................... 4
Basic Router Setup ..........................................................................5
Creating a Home Network ............................................................................................. 5
Router Installation ......................................................................................................... 6
Connect additional wired devices to your network..................................................... 11
Wireless Networking and Security ................................................. 12
Table of Contents
Access your router management page ........................................................................ 27
Set your router date and time ..................................................................................... 28
Manually configure your Internet connection ............................................................ 28
IPv6 Internet Connection Settings ............................................................................... 29
Clone a MAC address ................................................................................................... 30
Change your router IP address .................................................................................... 31
Set up the DHCP server on your router ....................................................................... 31
Set up DHCP reservation ............................................................................................. 32
Enable/disable UPnP on your router ........................................................................... 33
Allow/deny VPN connections through your router ..................................................... 33
Allow/deny multicast streaming.................................................................................. 34
Identify your network on the Internet ........................................................................ 34
Allow remote access to your router management page ............................................. 35
How to choose the type of security for your wireless network .................................. 12
Open a device on your network to the Internet.......................................................... 35
Secure your wireless network ..................................................................................... 13
DMZ ......................................................................................................................... 35
Connect wireless devices to your router ..................................................................... 15
Virtual Server .......................................................................................................... 36
Connect wireless devices using WPS ........................................................................... 16
Special Applications ................................................................................................ 38
Basic wireless settings ................................................................................................. 18
Add static routes to your router .................................................................................. 39
Steps to improve wireless connectivity ....................................................................... 20
Enable dynamic routing on your router ...................................................................... 41
Advanced wireless settings.......................................................................................... 21
Access Control Filters .................................................................... 22
Router Maintenance & Monitoring ............................................... 42
Reset your router to factory defaults .......................................................................... 42
Access control basics ................................................................................................... 22
Router Default Settings ............................................................................................... 42
MAC address filters ................................................................................................. 22
Backup and restore your router configuration settings .............................................. 43
Domain/URL Filters ................................................................................................. 23
Restart your router ...................................................................................................... 45
Protocol/IP filters .................................................................................................... 24
Check connectivity using the router management page ............................................. 45
Firewall rules ........................................................................................................... 25
Check the router system information ......................................................................... 46
Advanced Router Setup ................................................................. 27
View your router log .................................................................................................... 47
© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
Table of Contents
Configure your router log ............................................................................................ 48
View your router packet statistics ............................................................................... 49
View wireless devices connected to your router......................................................... 49
Capture packets using the router management page ................................................. 50
Enable SNMP on your router ....................................................................................... 50
Router Management Page Structure ............................................. 51
Technical Specifications................................................................. 52
Troubleshooting ............................................................................ 53
Appendix ...................................................................................... 54
© Copyright 2013 TRENDnet. All Rights Reserved.
ii
TEW-711BR
TRENDnet User’s Guide
Product Overview
Features
TRENDnet’s N150 Wireless Home Router, model TEW-711BR, provides reliable 150Mbps
wireless n speed and coverage to share files, play games, and surf the Internet.
Advanced encryption protects your wireless network, Access Control tools help block
unwanted Websites and unknown users, and embedded GREENnet technology reduces
power consumption by up to 50%.
WMM® Quality of Service (QoS) technology prioritizes gaming, Internet calls, and video
streams.
Wi-Fi Protected Setup (WPS) connects other WPS supported wireless adapters at the
touch of a button. LEDs on the front of the router convey device status. Network wired
devices to the four Fast Ethernet ports on the back of the router.






TEW-711BR



Package Contents

In addition to your router, the package includes:

•
•
•
•
Multi-Language Quick Installation Guide
CD-ROM (User’s Guide)
Network cable (1.5 m / 5 ft.)
Power adapter (5V DC, 1A)
If any package contents are missing or damaged, please contact the retail store, online
retailer, or reseller/distributor from which the product was purchased.








4 x 10/100Mbps Auto-MDIX LAN ports
1 x 10/100Mbps Auto-MDIX WAN port (Internet)
High-speed data rates of up to 150Mbps based on IEEE 802.11n*
Compliant with IEEE 802.11b/g standards
GREENnet technology reduces power consumption by up to 50%
Compatible with most popular cable/DSL Internet service providers using
Dynamic/Static IP, PPPoE, PPTP and L2TP protocols
Support for IPv6 (Internet Protocol v6) 6rd (IPv6 rapid deployment) DHCPv4,
manual and automatic configuration
One touch wireless connection to wireless clients using the WPS button
Advanced wireless security of up to WPA2-RADIUS
Internet Access Control (MAC Address, Domain, and IP Filtering)
Easy setup via Web browser using Internet Explorer 6.0 or above, Firefox 2.0
or above, Chrome, Opera, Safari
Firewall features Network Address Translation (NAT)
Virtual server and Application Level Gateway (ALG) services for special
Internet applications
Universal Plug and Play (UPnP) for auto discovery and support for device
configuration of Internet applications
Dynamic DNS Client for dynamic Internet IP resolution
Wi-Fi Multimedia (WMM) Quality of Service (QoS) data prioritization
Indoor range up to 100 meters (330 ft.)* depending on the environment
Outdoor range up to 300 meters (980 ft.)* depending on the environment
3-year limited warranty
© Copyright 2013 TRENDnet. All Rights Reserved.
TEW-711BR
TRENDnet User’s Guide
*Maximum wireless signal rates are referenced from IEEE 802.11 theoretical specifications. Actual
data throughput and coverage will vary depending on interference, network traffic, building
materials and other conditions.
Product Hardware Features
Rear View
•
Reset Button – Use an item such as a paperclip to push and hold this button for
15 seconds and release to reset your router to its factory defaults.
•
LAN Ports – Connect Ethernet cables (also called network cables) from your
router LAN ports to your wired network devices.
•
WAN Port– Connect an Ethernet cable from your router WAN port to your
modem.
•
Power Port – Connect the included power adapter from your router power
port and to an available power outlet.
•
On/Off Power Switch – Push the router On/Off power switch to turn your
router “On” (Inner position) or “Off” (Outer position).
•
Antenna – The antenna broadcasts wireless network signals.
© Copyright 2013 TRENDnet. All Rights Reserved.
TEW-711BR
TRENDnet User’s Guide
Front View
•
Power LED -This LED indicator is solid green when your router is powered on.
Otherwise if this LED indicator is off, there is no power to your router.
•
Status LED - This LED indicator is blinking green when your router is ready and
working successfully. If this LED indicator is solid green on or off, your router is
not receiving power or not working properly.
•
WAN (Link/Activity) LED – This LED indicator is solid green when your router
WAN port is physically connected to the modem Network port (also called
network port) successfully with a Network cable. The LED indicator will be
blinking green while data is transmitted or received through the WAN port of
your router.
•
WLAN (Link/Activity) LED – This LED indicator is blinking green when the
wireless is “On” and functioning properly on your router. This LED indicator will
be blinking green rapidly while data is transmitted or received by your wireless
clients or wireless network devices connected to your router.
•
LAN 1-4 (Link/Activity) LEDs – These LED indicators are solid green when the
LAN ports are successfully connected to your wired network devices (which are
turned on). These LED indicators will blink green while data is transmitted or
received through your router’s LAN ports.
© Copyright 2013 TRENDnet. All Rights Reserved.
TEW-711BR
TRENDnet User’s Guide
Side View
•
WPS (Wi-Fi Protected Setup) – Push and hold this button for 3 seconds to
activate WPS. The button LED is blinking blue when WPS is activated.
Application Diagram
The router is installed near the modem (typically supplied by your ISP “Internet Service
Provider”) and physically connected to it from the router’s WAN port to the modem’s
network port which connects to the Internet. Wireless signals from the router are
broadcasted to wireless clients such as laptops (with wireless capability) thereby
providing Internet access.
© Copyright 2013 TRENDnet. All Rights Reserved.
TEW-711BR
TRENDnet User’s Guide
Basic Router Setup
Creating a Home Network
What is a network?
A network is a group of computers or devices that can communicate with each other. A
home network of more than one computer or device also typically includes Internet
access, which requires a router.
A typical home network may include multiple computers, a media player/server, a
printer, a modem, and a router. A large home network may also have a switch,
additional routers, access points, and many Internet-capable media devices such as TVs,
game consoles, and Internet cameras.
•
Modem – Connects a computer or router to the Internet or ISP (Internet
Service Provider).
•
Router – Connects multiple devices to the Internet.
•
Switch –Connect several wired network devices to your home network. Your
router has a built-in network switch (the LAN port 1-4). If you have more wired
network devices than available Ethernet ports on your router, you will need an
additional switch to add more wired connections.
2. Make sure that your modem is working properly. Your modem is often provided by
your Internet Service Provider (ISP) when you sign up for Internet service. If your
modem is not working contact your ISP to verify functionality.
3. Set up your router. See “How to setup your router” below.
4. To connect additional wired computers or wired network devices to your network,
see “Connect additional wired devices to your network” on page 11.
5. To set up wireless networking on your router, see “Wireless Networking and Security”
on page 12.
How to setup your router
Refer to the Quick Installation Guide or continue to the next section “Router
Installation” on page 6 for more detailed installation instructions.
Where to find more help
In addition to this User’s Guide, you can find help below:
•
http://www.trendnet.com/support
(documents, downloads, and FAQs are available from this Web page)
How to set up a home network
1. For a network that includes Internet access, you’ll need:
•
•
•
Computers/devices with an Ethernet port (also called network port) or wireless
networking capabilities.
A modem and Internet service to your home, provided by your ISP (modem
typically supplied by your ISP).
A router to connect multiple devices to the Internet.
© Copyright 2013 TRENDnet. All Rights Reserved.
TEW-711BR
TRENDnet User’s Guide
Router Installation
Before you Install
Many Internet Service Providers (ISPs) allow your router to connect to the Internet
without verifying the information fields listed below. Skip this section for now and if
your router cannot connect to the Internet using the standard installation process, come
back to this page and contact your ISP to verify required ISP specification fields listed
below.
1. Obtain IP Address Automatically (DHCP)
Host Name (Optional)
Clone Mac Address (Optional)
2. Fixed IP address
WAN IP Address: _____. _____._____._____
(e.g. 215.24.24.129)
WAN Subnet Mask: _____. _____._____._____
WAN Gateway IP Address: _____. _____._____._____
DNS Server Address 1: _____. _____._____._____
DNS Server Address 2: _____. _____._____._____
3. PPPoE to obtain IP automatically
User Name: _________
Password: ________________
Verify Password: ________________
4. PPPoE with a fixed IP address
User Name: _________
Password: ________________
Verify Password: ________________
IP Address: ____. _____._____._____ (e.g. 215.24.24.129)
5. PPTP or Russian PPTP
Type (Dynamic IP or Static IP)
My IP Address: _____. _____._____._____
(e.g. 215.24.24.129)
Subnet Mask:_____. _____._____._____
Gateway:_____. _____._____._____
Server IP: _____. _____._____._____
PPTP Account: ________________
PPTP Password: ________________
Retype Password: ________________
6. L2TP or Russia L2TP
Type (Dynamic IP or Static IP)
My IP Address: _____. _____._____._____
(e.g. 215.24.24.129)
Subnet Mask:_____. _____._____._____
Gateway:_____. _____._____._____
Server IP: _____. _____._____._____
L2TP Account: ________________
L2TP Password: ________________
Retype Password: ________________
7. Russia PPPoE
Type (Dynamic IP or Static IP)
User Name: _________
Password: ________________
Verify Password: ________________
IP Address: ____. _____._____._____ (e.g. 215.24.24.129)
© Copyright 2013 TRENDnet. All Rights Reserved.
TEW-711BR
TRENDnet User’s Guide
Hardware Installation
1. Verify that you have an Internet connection when connecting your computer directly
to your modem.
5. Using another Network cable, connect the WAN port on the router to your modem.
6. Plug in the power adapter, connect it to the router’s power port, and then push the
On/Off Power Switch to the “On” position (pushed in).
2. Turn off your modem.
3. Disconnect the Network cable from your computer to your modem.
7. Turn on your modem.
4. Using a Network cable, connect your computer to one of the four LAN ports on the
router.
8. Verify that the following front panel LED indicators on your router: Power (Solid
Green), Status (Blinking Green), LAN 1, 2, 3, or 4 (Solid/Blinking Green for ports for
which devices are connected), WAN (Solid/Blinking Green), and WLAN (Blinking Green).
© Copyright 2013 TRENDnet. All Rights Reserved.
TEW-711BR
TRENDnet User’s Guide
Setup Wizard
1. Open your web browser (e.g. Internet Explorer, Firefox, Safari, Chrome, or Opera) and
go to http://192.168.10.1. Your router will prompt you for a user name and password.
3. The Setup Wizard will automatically appear. Click Next.
Note: If the Setup Wizard does not automatically appear, click Wizard (the bottom
button on the left tab).
2. Next to Language, click the drop-down list to select your preferred language. Enter
the default user name and password and then click Login.
Default User Name: admin
Default Password: admin
4. Enter a new login password for your router and enter it again next to “Verify
Password” to confirm. This will change the password required to log into your router.
Click Next.
Note: This is the password to enter your router’s management interface and NOT to
connect to the router wirelessly. Once you change the login password, it will be required
every time you log into your router. Store your router password in a location that you
can reference at a future time.
© Copyright 2013 TRENDnet. All Rights Reserved.
TEW-711BR
TRENDnet User’s Guide
5. Select the Time Zone for your router and click Next.
7. This section determines what method the router will use to interface with your ISP
service. Most ISP services allow your router to obtain an IP address automatically. Do
not change the default setting of Obtain IP Automatically and click next to proceed.
Note: If you know that your ISP requires a configuration other than Obtain IP
Automatically or if are having difficulty completing the router installation, please contact
your ISP to verify all required settings for one of the options listed on page 6. The options
listed on page 6 match the settings options available to choose from.
6. Click Next at the Set LAN connection and DHCP Server window.
Note: If you are an advanced user, you can make LAN IP address interface and DHCP IP
address range changes here.
8. Wireless LAN: Select Enable for Wireless LAN.
Note: Selecting Disable will disable the wireless functionality of the router and will not
allow wireless clients to connect.
© Copyright 2013 TRENDnet. All Rights Reserved.
TEW-711BR
TRENDnet User’s Guide
9. SSID: Enter a unique SSID (Wireless Network Name). Choose something that you
would easily identify when searching for available wireless networks (using laptops,
smart phones, etc.) Click Next.
11. Wait for your router to reboot.
12. Verify you have an Internet connection by opening a Web browser on your
computer.
Note:
1. To protect your network from unauthorized access, it is recommended to enable
wireless encryption. See “Secure your wireless network” on page 13 for information on
configuring wireless security.
Note: If you cannot access the Internet, power down your modem and router again.
Occasionally certain modems need to be power cycled to adopt new router settings.
2. Once wireless security is enabled on your router, each wireless device connecting to
your router must be configured with the same wireless security type and key.
10. Click Restart and wait for your router to reboot.
© Copyright 2013 TRENDnet. All Rights Reserved.
10
TRENDnet User’s Guide
TEW-711BR
Connect additional wired devices to your network
You can connect additional computers or other network enabled devices to your
network by using Ethernet cables to connect them to one of the available LAN ports
labeled 1,2,3,4 on your router. Check the status of the LED indicators (1, 2, 3, or 4) on
the front panel of your router to ensure the physical cable connection from your
computer or device.
Note: If you encounter issues connecting to your network, there may be a problem with
your computer or device network settings. Please ensure that your computer or device
network settings (also called TCP/IP settings) are configured to obtain IP address settings
automatically (also called dynamic IP address or DHCP) and to Obtain DNS Server
address settings automatically.
© Copyright 2013 TRENDnet. All Rights Reserved.
11
TEW-711BR
TRENDnet User’s Guide
Wireless Networking and Security
cards(wireless clients), you may have to set your router to WEP to allow the old
adapters to connect to the router. Note: This encryption standard will limit
How to choose the type of security for your wireless network
connection speeds to 54Mbps.
•
Setting up wireless security is very important. Leaving your wireless network open and
unsecure could expose your entire network and personal files to outsiders. TRENDnet
recommends reading through this entire section and setting up wireless security on your
new router.
WPA: This encryption is significantly more robust than the WEP technology.
Much of the older 802.11g hardware was been upgraded (with firmware/driver
upgrades) to support this encryption standard. Total wireless speeds under
this encryption type however are limited to 54Mbps.
•
WPA-Auto: This setting provides the router with the ability to detect wireless
There are a few different wireless security types supported in wireless networking each
devices using either WPA or WPA2 encryption. Your wireless network will
having its own characteristics which may be more suitable for your wireless network
automatically change the encryption setting based on the first wireless device
taking into consideration compatibility, performance, as well as the security strength
connected. For example, if the first wireless client that connects to your
along with using older wireless networking hardware (also called legacy hardware).
wireless network uses WPA encryption your wireless network will use WPA
encryption. Only when all wireless clients disconnect to the network and a
wireless client with WPA2 encryption connects your wireless network will then
It is strongly recommended to enable wireless security to prevent unwanted users from
change to WPA2 encryption. NOTE: WPA2 encryption supports 802.11n speeds
accessing your network and network resources (personal documents, media, etc.).
and WPA encryption will limit your connection speeds to 54Mbps
•
WPA2: This is the most secure wireless encryption available today, similar to
In general, it is recommended that you choose the security type with the highest
WPA encryption but more robust. This encryption standard also supports the
strength and performance supported by the wireless computers and devices in your
highest connection speeds. TRENDnet recommends setting your router to this
network. Please review the security types to determine which one you should use for
encryption standard. If you find that one of your wireless network devices does
your network.
not support WPA2 encryption, then set your router to either WPA or WPA-Auto
Wireless Encryption Types
encryption.
•
WEP: Legacy encryption method supported by older 802.11b/g hardware. This
is the oldest and least secure type of wireless encryption. It is generally not
Note: Check the specifications of your wireless network adapters and wireless appliances
to verify the highest level of encryption supported.
recommended to use this encryption standard, however if you have old 802.11
b or 802.11g wireless adapters or computers with old embedded wireless
© Copyright 2013 TRENDnet. All Rights Reserved.
12
TEW-711BR
TRENDnet User’s Guide
Below is brief comparison chart of the wireless security types and the recommended
configuration depending on which type you choose for your wireless network.
Secure your wireless network
Security Standard
After you have determined which security type to use for your wireless network (see
“How to choose the security type for your wireless network” on page 12), you can set up
wireless security.
Compatible
Wireless
Standards
Highest
Performance
Under This
Setting
Encryption
Strength
Additional
Options
Recommended
Configuration
WEP
IEEE 802.11a/b/g
(802.11n devices
will operate at
802.11g to connect
using this standard)
WPA
IEEE 802.11a/b/g
(802.11n devices
will operate at
802.11g to connect
using this
standard)
WPA2
IEEE 802.11a/b/g/n
Wireless > Security
1. Log into your router management page (see “Access your router management page”
on page 27).
2. Click on Wireless, and click on Security.
Up to 54Mbps
Up to 54Mbps
Up to 450Mbps*
Low
Open System or
Shared Key,
HEX or ASCII,
Different key sizes
Medium
High
TKIP or AES,
Preshared Key or
RADIUS
TKIP or AES,
Preshared Key or
RADIUS
TKIP
Preshared Key
8-63 characters
AES
Preshared Key
8-63 characters
Open System ASCII
13 characters
3. Click on the Authentication Type drop-down list to select your wireless security type.
*Dependent on the maximum 802.11n data rate supported by the device (150Mbps,
300Mbps, or 450Mbps)
© Copyright 2013 TRENDnet. All Rights Reserved.
13
TEW-711BR
TRENDnet User’s Guide
Selecting WEP:
password of 12345, then the client must select: Key 2 (entering Key 1,
3, or 4 will block the ability to connect) and enter password 12345)
If selecting WEP (Wired Equivalent Privacy), please review the WEP settings to configure
and click Apply to save the changes.
Selecting WPA, WPA-Auto, or WPA2 (WPA2 recommended):
First, from the Authentication Type row, select WPA, WPA-Auto, or WPA2.
• WEP– Choose Open System or Shared Key.
Note: It is recommended to use Open System because it is known to be more secure
than Shared Key.
• Mode – Choose HEX or ASCII.
Note: It is recommended to use ASCII because of the much larger character set that
can be used to create the key.
• WEP Key – Choose the key length 64-bit or 128-bit.
Note: It is recommended to use 128-bit because it is more secure to use a key that
consists of more characters.
•
Key 1-4
o This is where you enter the password or key needed for a computer to
connect to the router wirelessly
o You can define up to 4 passwords or 4 keys. Only one key can be active
at a given time. Most users simply define one key.
o Choose a key index 1, 2, 3, or 4 and enter the key.
o When connecting to the router, the client must match both the
password and the Key number. (e.g. if you have activated Key 2 with a
Then from the PSK/EAP row, select either PSK or EAP
•
•
PSK stands for Preshared Key
EAP stands for Extensive Authentication Protocol, also called Remote
Authentication Dial-In User Service or RADIUS).
Note: EAP requires an external RADIUS server, PSK only requires you to create a
passphrase.
The following section outlines options when selecting PSK (Preshared Key Protocol),
WEP Key Format
HEX
ASCII
Character set
0-9 & A-F, a-f only
Alphanumeric (a,b,C,?,*, /,1,2, etc.)
64-bit key length
10 characters
5 characters
128-bit key length
26 characters
13 characters
Select a Cipher Type. When selecting WPA security, it is recommended
to use TKIP.
When selecting WPA-Auto security, it is recommended to use AES.
When selecting WPA2 security, it is recommended to use AES.
© Copyright 2013 TRENDnet. All Rights Reserved.
14
TEW-711BR
TRENDnet User’s Guide
Create your Wireless security Passphrase (password or key):
• Passphrase – Enter the passphrase.
o This is the password or key that is used to connect your computer to
this router wirelessly
•
•
RADIUS Server 1/2 - Configure the RADIUS server settings.
Note: RADIUS Server 2 is optional and can be configured as a backup if there are any
issues with RADIUS Server 1.
Confirmed Passphrase – Re-enter the passphrase.
Note: 8-63 alphanumeric characters (a,b,C,?,*, /,1,2, etc.)
IP – Enter the IP address of the RADIUS server. (e.g. 192.168.10.250)
Port – Enter the port your RADIUS server is configured to use for
RADIUS authentication.
The following section outlines options when selecting EAP (Extensive Authentication
Protocol),
Note: It is recommended to use port 1812.
EAP (Extensible Authentication Protocol) is also called Remote Authentication Dial-In
User Service or RADIUS.
Select a Cipher Type
o When selecting WPA security, it is recommended to use TKIP.
o When selecting WPA-Auto security, it is recommended to use AES.
o When selecting WPA2 security, it is recommended to use AES.
Shared Secret – Enter the shared secret used to authorize your router
with your RADIUS server.
Connect wireless devices to your router
A variety of wireless network devices can connect to your wireless network such as:
•
Gaming Consoles
•
Internet enabled TVs
•
Network media players
•
Smart Phones
•
Wireless Laptop computers
•
Wireless IP cameras
Each device may have its own software utility for searching and connecting to available
wireless networks, therefore, you must refer to the User’s Manual/Guide of your
wireless client device to determine how to search and connect to this router’s wireless
network.
See the “Appendix” on page 54 for general information on connecting to a wireless
network.
© Copyright 2013 TRENDnet. All Rights Reserved.
15
TEW-711BR
TRENDnet User’s Guide
Connect wireless devices using WPS
WPS (Wi-Fi Protected Setup) is a feature that makes it easy to connect devices to your
wireless network. If your wireless devices support WPS, you can use this feature to
easily add wireless devices to your network.
PBC (Software/Virtual Push Button)
Wireless >WiFi Protected Setup
Note: You will not be able to use WPS if you set the SSID Broadcast setting to Disabled.
In addition to the hardware push button located physically on your router, the router
management page also has push button which is a software or virtual push button you
can click to activate WPS on your router.
There are two methods the WPS feature can easily connect your wireless devices to
your network.
1. Log into your router management page (see “Access your router management page”
on page 27).
•
•
Push Button Configuration (PBC) method
RECOMMENDED Hardware Push Button method–with an external
button located physically on your router and on your client device
WPS Software/Virtual Push Button - located in router management
page
PIN (Personal Identification Number) Method - located in router management
page
2. Click on Wireless, and click on WPS.
3. To add a wireless device to your network, simply the push the WPS button on the
wireless device (consult wireless device’s User’s Guide for length of time), you are
connecting, then in your router management page next to Push Button Configuration,
click Start PBC.
Note: Refer to your wireless device documentation for details on the operation of WPS.
Recommended Hardware Push Button (PBC) Method
•
Note it is recommended that a wireless key (passphrase or password) is created
before connecting clients using the PBC method. If no wireless key is defined
when connecting via PBC, the router will automatically create an encryption
key that is 64 characters long. This 64 character key will then have to be used if
one has to connect computers to the router using the traditional connection
method.
To add a wireless device to your network, simply push the WPS button on the wireless
device you are connecting(consult client device User’s Guide for length of time), then
push and hold the WPS button located on your router for 3 seconds and release it. A
blue LED on your router WPS button will flash indicating that the WPS setup process has
been activated on your router. (See “Product Hardware Features” on page 2)
4. You will receive a message counting down indicating the WPS process is activated on
your router.
5. You will receive a success message indicate that the wireless device successfully
connected using WPS.
For connecting additional WPS supported devices, repeat this process for each
additional device.
© Copyright 2013 TRENDnet. All Rights Reserved.
16
TEW-711BR
TRENDnet User’s Guide
PIN (Personal Identification Number)
WPS PIN Security
Wireless >WiFi Protected Setup
Wireless >WiFi Protected Setup
If your wireless device has WPS PIN (typically an 8-digit code printed on the wireless
device product label or located in the wireless device wireless software utility), you can
use this method.
To protect your wireless network against WPS PIN attacks, the WPS Auto Lock Down
State feature will automatically disable the WPS PIN method after 10 failed WPS PIN
attempts. Once lock down state is activated, the WPS PIN method will be disabled until
you access the router management page and unlock it.
1. Log into your router management page (see “Access your router management page”
on page 27).
2. Click on Wireless, and click on WPS.
3. Next to Client PIN Number, enter the WPS PIN of the wireless device you are
connecting and click Start PIN.
Note: You may need to initiate the WPS PIN on your wireless device first when using this
method. Refer to your wireless device documentation for details on the operation of
WPS.
1. Log into your router management page (see “Access your router management page”
on page 27).
2. Click on Wireless, and click on WPS.
3. If Auto-lock-down-state is activated, the status will display as Locked. To unlock this
state and re-enable WPS PIN method, click Unlock.
4. To save changes, click Apply.
© Copyright 2013 TRENDnet. All Rights Reserved.
17
TEW-711BR
TRENDnet User’s Guide
Basic wireless settings
Wireless > Basic
This section outlines available management options under the Basic Wireless sub tab.
1. Log into your router management page (see “Access your router management page”
on page 27).
•
Channels (13 in Europe and other countries). Selecting Auto Channel enables
the router to automatically select the best Channel for wireless
2. Click on Wireless, and click on Basic.
3. To save changes to this section, click Apply when finished.
Auto Channel – In North America, this router can broadcast on 1 of 11
communication.
•
Channel – To manually set the channel on which the router will broadcast,
uncheck Auto Channel, then click the drop-down list and select the desired
Channel for wireless communication. The goal is to select the Channel that is
•
least used by neighboring wireless networks.
Wireless
Enabled turns on the wireless networking on your router (by default it
is enabled).
•
802.11 Mode - Select the appropriate mode for your network.
compatibility. This mode allows older 802.11b and 802.11g wireless
Disabled turns off wireless networking on your router.
Note: It is recommended to leave the wireless setting to Enabled unless you do not
plan on connecting any wireless computers or devices to your network.
2.4GHz 802.11b/g/n mixed mode – Select this mode for the best
devices to connect to the router in addition to newer 802.11n devices.
2.4GHz 802.11b/g mixed mode – This mode only allows devices to
connect to the router using older and slow 802.11b or 802.11g
technology and it thereby reduces the router’s maximum speed to
54Mbps (typically not recommended).
•
SSID – This acronym stands for Service Set Identifier and is the name of your
wireless network. It differentiates your wireless network from others around
you. By default, the router broadcast TRENDnet711 as the wireless network
name. If you choose to change the SSID, change it to a name that you can easily
remember.
2.4GHz 802.11n only mode – This mode only allows newer 802.11n
devices to connect to your router. This mode does ensure the highest
speed and security for your network, however if you have older
802.11g wireless clients, they will no longer be able to connect to this
router.
© Copyright 2013 TRENDnet. All Rights Reserved.
18
TEW-711BR
TRENDnet User’s Guide
2.4GHz 802.11g only mode – This mode only allows devices to
stability than Auto 20/40 MHz for connectivity in busy wireless
connect to the router using older and slow 802.11g technology
environments where there are several wireless networks in the area.
(typically not recommended).
Auto 20/40 MHz – This mode can automatically switch between using
2.4GHz 802.11b only mode – This mode only allows devices to
a single 20MHz channel or 40MHz (two 20MHz channels). When
connect to the router using older and slow 802.11b technology
40MHz is active, this mode is capable of providing higher performance
(typically not recommended).
only if the wireless devices support the 40MHz channel width.
Note: Please check the specifications on your wireless devices for the highest wireless
capability supported first before applying these settings. If you are unsure, it is
recommended that you keep the default setting (2.4GHz 802.11b/g/n mixed mode) for
the best compatibility.
When applying the 802.11 mode setting, please keep in mind the following:
• Wireless devices that support 802.11n are backwards compatible and can
connect wirelessly at 802.11g or 802.11b.
• Connecting at 802.11b or 802.11g will limit the capability of your 802.11n
supported wireless devices from obtaining higher performance and data rates.
• Allowing 802.11b or 802.11g devices to connect to an 802.11n capable wireless
network may degrade the wireless network performance below the higher
performance and data rates of 802.11n.
• Wireless devices that only support 802.11b or 802.11g will not be able to
connect to a wireless network that is set to 802.11n only mode.
• Wireless devices that only support 802.11b will not be able to connect to a
wireless network that is set to 802.11g only mode.
Enabling 20/40MHz typically results in substantial performance
increases when connecting to an 802.11n client.
•
SSID Broadcast
Enabled allows wireless devices to search and discover your wireless
network name (also called SSID) broadcasted by your router.
Disabled turns off the ability for wireless devices to find your network.
It is still possible for wireless devices to be configured to connect to
your wireless network.
Note: Setting this option to Disabled, will disable WPS functionality.
•
WMM – Wi-Fi Multimedia is a Quality of Service (QoS) feature which prioritizes
audio and video data packets. This feature requires the wireless device to also
support WMM. Click Enabled (recommended) or Disabled to turn this feature
on or off on your router.
•
Channel Width – This setting only applies to wireless devices connecting at
802.11n. Select the appropriate channel width for your wireless network.
20 MHz – This mode operates using a single 20MHz channel for
wireless devices connecting at 802.11n. This setting may provide more
© Copyright 2013 TRENDnet. All Rights Reserved.
19
TEW-711BR
TRENDnet User’s Guide
Steps to improve wireless connectivity
There are a number of factors that can impact the range of wireless devices. Follow
these tips to help improve your wireless connectivity:
1.
2.
Keep the number of obstructions to a minimum. Each obstruction can reduce
the range of a wireless device. Position the wireless devices in a manner that
will minimize the amount of obstructions between them.
a.
For the widest coverage area, install your router near the center of
your home, and near the ceiling, if possible.
b.
Avoid placing the router on or near metal objects (such as file cabinets
and metal furniture), reflective surfaces (such as glass or mirrors), and
masonry walls.
c.
Any obstruction can weaken the wireless signal (even non-metallic
objects), so the fewer obstructions between the router and the
wireless device, the better.
d.
Place the router in a location away from other electronics, motors,
and fluorescent lighting.
e.
Many environmental variables can affect the router’s performance, so
if your wireless signal is weak, place the router in several locations and
test the signal strength to determine the ideal position.
3.
Antenna orientation can also have a large impact on your wireless signal. Use
the wireless adapter’s site survey tool to determine the best antenna
orientation for your wireless devices.
4.
Interference from devices that produce RF (radio frequency) noise can also
impact your signal. Position your wireless devices away from anything that
generates RF noise, such as microwaves, radios and baby monitors.
If possible, upgrade wireless network interfaces (such as wireless cards in computers)
from older wireless standards to 802.11n. If a wirelessly networked device uses an older
standard, the performance of the entire wireless network may be slower. If you are still
experiencing low or no signal consider repositioning the wireless devices or installing
additional access points.
Building materials can have a large impact on your wireless signal. In an indoor
environment, try to position the wireless devices so that the signal passes
through less dense material such as dry wall. Dense materials like metal, solid
wood, glass or even furniture may block or degrade the signal.
© Copyright 2013 TRENDnet. All Rights Reserved.
20
TEW-711BR
TRENDnet User’s Guide
Advanced wireless settings
•
Fragmentation Threshold – Fragmentation in wireless networks is the process
of breaking down data communications into smaller data packets in order to
improve data efficiency when transferring or receiving data between wireless
devices. The fragmentation threshold defines the maximum size of the data
packets that are broken down.
Default Value: 2346 (range: 1500~2346, even numbers only)
•
DTIM Interval – A Delivery Traffic Indication Message (DTIM) is an
informational message that is sent as part of a beacon by an access point (your
wireless router) to a wireless client (wireless device or connecting station) in
sleep mode to provide an alert that data is awaiting delivery. The DTIM Interval
(also called Data Beacon Rate) is the amount of time between DTIM
transmissions included in part of a beacon.
Default Value: 1 (range: 1-255)
Wireless > Advanced
These settings are advanced options that can be configured to change advanced
wireless broadcast specifications. It is recommended that these settings remain set to
their default values unless you are knowledgeable about the effects of changing these
values. Changing these settings incorrectly can degrade performance.
•
Beacon Interval – A beacon is a management frame used in wireless networks
that transmitted periodically to announce the presence and provide
information about the router’s wireless network. The interval is the amount
time between each beacon transmission.
Default Value:100 milliseconds (range: 25-1000)
•
RTS Threshold – The Request To Send (RTS) function is part of the networking
protocol. A wireless device that needs to send data will send a RTS before
sending the data in question. The destination wireless device will send a
response called Clear to Send (CTS). The RTS Threshold defines the smallest
data packet size allowed to initiate the RTS/CTS function.
Default Value: 2346 (range: 256-2346)
© Copyright 2013 TRENDnet. All Rights Reserved.
21
TEW-711BR
TRENDnet User’s Guide
Access Control Filters
Access control basics
Access > Filter
Note: You can check the Dynamic DHCP List for the MAC addresses of the devices on
your network, see “Setup the DHCP server on your router” on page 31 or refer to your
computer or device documentation to find the MAC address.
MAC address filters
Access > Filter > MAC Filters
Every network device has a unique, 12-digit MAC (Media Access Control) address. Using
MAC filters, you can allow or deny specific computers and other devices from using this
router’s wired or wireless network.
1. Log into your router management page (see “Access your router management page”
on page 27).
Click Add to save the new MAC address entry to the MAC Table. After clicking Add, the
MAC address entry will appear in the list below. Repeat for each device.
2. Click on Access, click on Filter, and click on MAC Filters.
•
3. Add the MAC addresses to the MAC Table first before applying the MAC filter
function.
Note: MAC filter can be configured to allow access to the listed MAC address and deny
all others unlisted or vice versa. The recommended function is to choose to only allow
access to the MAC addresses listed and deny all others unlisted because it is easier to
determine the MAC addresses of devices in your network then to determine which MAC
addresses you do not want to allow access.
•
•
Add – Saves a new MAC address entry.
To modify an existing MAC address entry, click on the entry in the MAC Table. When
selected, the entry will be highlighted.
•
Delete – Removes an existing MAC address entry.
•
Update – Modifies an existing MAC address entry.
•
Cancel – Discard changes to an existing MAC address entry.
Name – Enter a name for the MAC address entry.
MAC Address – Enter the 12-digit MAC address.(e.g. 00-11-22-AA-BB-CC)
© Copyright 2013 TRENDnet. All Rights Reserved.
22
TEW-711BR
TRENDnet User’s Guide
4. Review the MAC Filter options.
• Disabled – disables MAC address filter.
•
Only Allow computers/devices with MAC addresses listed below to access the
local network (LAN/WLAN), web management, and the Internet.
•
Only Deny computers/devices with MAC addresses listed below to access the
local network (LAN/WLAN), web management, and the Internet
Note: Do not configure this setting until you have added the MAC addresses to the MAC
Table first. The recommended option is to only Allow access to the MAC addresses listed
and deny all others unlisted.
Domain/URL Filters
Access > Filter > Domain/URL Blocking
You may want to allow or block computers or devices on your network access to specific
websites (e.g. www.trendnet.com, etc.), also called domains or URLs (Uniform Resource
Locators). You may also enter a keyword (e.g. instead of complete URL to generally
allow or block computers or devices access to websites that may contain the keyword in
the URL or on the web page.
1. Log into your router management page (see “Access your router management page”
on page 27).
2. Click on Access, click on Filter, and click on Domain/URL Blocking.
Click Apply to save the changes.
3. Review the Domain/URL blocking options.
•
Disabled – disables domain/URL blocking
•
Allow users to access all domains listed.
(Deny access to all other unlisted websites)
•
Deny users to access all domains listed.
(Allow access to all other unlisted websites)
© Copyright 2013 TRENDnet. All Rights Reserved.
23
TEW-711BR
TRENDnet User’s Guide
Click Apply to save the changes.
Protocol/IP filters
Access > Filter > Protocol/IP Filters
You may want to block computers or devices on your network access to specific ports
(used or required by a specific application) to the Internet.
4. Under Domain Blocking click on Allow or Deny. The Domains List will then appear.
Enter the Website/URL/domain (e.g.www.trendnet.com) or keyword (e.g. trendnet) to
allow or block access and click Add to add this to the domains list. The entry will be
listed below. Repeat for each additional website or keyword added.
•
•
Cancel - Discard changes to the domains list.
Delete -Delete an existing website/URL/domain or keyword entry, click on the
entry in the Domains List. When selected, the entry will be highlighted. Click
Delete to remove it from the list.
4. Go back to the Domain Blocking section and confirm you want to Allow or Deny
access to the Domains List. It is generally easier to manage a list of Domains for which
access is denied.
5. In Domain Blocking click on Apply to save the selected settings.
1. Log into your router management page (see “Access your router management page”
on page 27).
2. Click on Access, click on Filter, and click on Protocol/IP Filters.
To simplify configuration, there is a list of commonly used pre-defined Protocol/IP Filters
to modify otherwise, you can choose to manually add a new Protocol/IP Filter.
3. Review the protocol/IP filter settings.
•
Enabled – Selecting Enabled turns on the Protocol/IP Filter and selecting
Disabled turns it off.
•
Name – Enter a name for the Protocol/IP Filter.
© Copyright 2013 TRENDnet. All Rights Reserved.
24
TEW-711BR
TRENDnet User’s Guide
•
Protocol – Select the protocol type to filter. TCP, UDP, or you can select * to
choose all protocol types.
Firewall rules
•
Port – Enter the port number or port range numbers to block. (e.g. 80-80 or 2021).
•
IP Range – Enter the IP address or IP address range to apply the protocol/IP
filter. (e.g. 192.168.10.20-192.168.10.20 or 192.168.10.20-192.168.10.30).
You may want specify inbound or outbound access control to allow/deny sources (or
Internet IP addresses) to your network from the Internet or from computers or devices
on your network to the Internet. Firewall rules may allow for more granular control of
specific inbound and outbound access between your network and the Internet. It is
recommended that these settings remain set to default unless you are knowledgeable
about the effects of changing the firewall rule configuration. It is possible to have
undesirable functionality from your router if these settings are improperly modified.
Note: The filter will not be applied to IP addresses outside of the range
specified.
Access > Firewall Rule
1. Log into your router management page (see “Access your router management page”
on page 27).
2. Click on Access, click on Filter, and click on Firewall Rule.
•
Add – Saves new protocol/IP filter.
3. In the list, there are two default rules specific which cannot be modified. One rule to
deny all access from the Internet to your network for security and the other to allow all
access from your network to the Internet. Any additional rules will take precedence over
the default rules.
To modify an existing protocol/IP filter, click on the entry in the Protocol/IP Filters list.
When selected, the entry will be highlighted.
•
Delete – Removes an existing protocol/IP filter.
•
Update – Modifies an existing protocol/IP filter.
•
Cancel – Discard changes to an existing protocol/IP filter.
© Copyright 2013 TRENDnet. All Rights Reserved.
25
TEW-711BR
TRENDnet User’s Guide
4. Review the firewall rule settings.
•
Enabled – Selecting Enabled turns on the firewall ruler and selecting Disabled
turns it off.
•
Name – Enter a name for the firewall rule.
•
Action – Select Allow will allow access and selecting Deny will block or deny
access.
•
Source – Configure the source information for the firewall rule.
Interface - Click the drop-down list and select LAN (from your
network) or WAN (from the Internet) depending on where the traffic
will be coming from.
IP Range Start – Changes the starting address for the firewall rule to
apply (e.g. 192.168.1.20)
•
Add – Saves new firewall rule.
•
IP Range End – Changes the last address for the firewall rule to apply
(e.g. 192.168.1.30)
Update – Modifies an existing firewall rule.
•
Delete – Removes an existing firewall rule.
•
New -Saves new firewall rule.
•
•
Cancel – Discard changes to an existing firewall rule.
•
Priority Up – Moves an existing firewall rule one step higher in priority.
•
Priority Down – Moves an existing firewall rule one step below in priority.
•
Update Priority – Save updated changes to priority.
Note: The IP Range Start and End specify the range of IP addresses
that the firewall rule will apply. Both fields need to be completed so
use the same value to specify a single IP address.
•
Destination – Configure the destination information for the firewall rule.
Interface - Click the drop-down list and select LAN (your network) or
WAN (Internet) depending on where the traffic will be coming from.
IP Range Start – Changes the starting address for the firewall rule to
apply (e.g. 192.168.10.20)
IP Range End – Changes the last address for the firewall rule to apply
(e.g. 192.168.10.30)
Note: Top position in the list is the highest priority, bottom position in the list is
the lowest priority.
Note: The IP Range Start and End specify the range of IP addresses that the
firewall rule will apply. Both fields need to be completed so use the same
value to specify a single IP address.
Protocol – Select the protocol type to filter. TCP, UDP, ICMP, or you
can select * to choose all protocol types. Below, enter the port
number or range of port numbers to apply the firewall rule. (e.g. 80-80
or 20-21). For all ports, use the port range 1 - 65534.
To modify an existing firewall rule, click on the rule in the firewall rules list. When
selected, the entry will be highlighted.
© Copyright 2013 TRENDnet. All Rights Reserved.
26
TEW-711BR
TRENDnet User’s Guide
Advanced Router Setup
Access your router management page
Note: Your router management page http://192.168.10.1 is accessed through the use of
your Internet web browser (e.g. Internet Explorer, Firefox, Chrome, Safari, Opera) and
will be referenced frequently in this User’s Guide.
1. Open your web browser (e.g. Internet Explorer, Firefox, Safari, Chrome, or Opera) and
go to http://192.168.10.1. Your router will prompt you for a user name and password.
Change your router login password
Main > Password
1. Log into your router management page (see “Access your router management page”
on page 27).
2. Click on Main, and click on Password.
3. Under the Administrator section, in the New Password field, enter the new
password, and in the Confirm Password field, retype the new password again to
confirm.
4. To save changes, click Apply.
2. Next to Language, click the drop-down list to select your preferred language. Enter
the default user name and password and then click Login.
Default User Name: admin
Default Password: admin
Note: If you change the router login password, you will need to access the router
management page using the User Name “admin” and the new password instead of the
default password “admin”.
© Copyright 2013 TRENDnet. All Rights Reserved.
27
TEW-711BR
TRENDnet User’s Guide
User (Optional): The User account is an additional account used for viewing the settings
on the router management page only. Accessing the router management page using the
User account will restrict access to viewing only and will not allow any settings to be
changed.
5. You can verify the time/date settings next to Local Time at the top of the page. Local
Time displays the current date and time set on your router.
Default User Name: user
Default Password: user
Set your router date and time
Main > Time
1. Log into your router management page (see “Access your router management page”
on page 27).
2. Click on Main, and click on Time.
3. Next to Time Zone, click the drop-down list to select your Time Zone.
4. Next to Synchronize the clock with, you can choose one of the following options:
•
•
Manually configure your Internet connection
Manual – Set your router date and time manually in the Set Time section. To
save changes, click Apply.
Note: Time is specified in 24-hour format.
OR
Automatic – Set your router date and time to synchronize with an NTP
(Network Time Protocol) server address (e.g. pool.ntp.org). Enter the NTP
server address next to Default NTP server, (e.g. pool.ntp.org). Next to Daylight
Saving, set the annual range when daylight saving is activated. To save
changes, click Apply.
Note: NTP servers are used for computers and other network devices to synchronize
time across an entire network.
Main > WAN
1. Log into your router management page (see “Access your router management page”
on page 27).
2. Click on Main, and click on WAN.
3. In the Connection Type drop-down list, click the type of Internet connection provided
by your Internet Service Provider (ISP).
4. Complete the fields required by your ISP.
© Copyright 2013 TRENDnet. All Rights Reserved.
28
TEW-711BR
TRENDnet User’s Guide
5. Complete the optional settings only if required by your ISP.
6. To save changes, click Apply.
•
Easier configuration of addressing
Note: In order to use IPv6 Internet connection settings, it is required that your ISP
provide you with the IPv6 service. Please contact your ISP for availability and more
information about the IPv6 service.
Note: If you are unsure which Internet connection type you are using, please contact
your ISP. Note: If your ISP requires a host name to be specified, you can specify it under
Main > LAN & DHCP Server, in the Host Name field. To save changes, click Apply at
bottom of the page.
IPv6 Internet Connection Settings
Main > IPv6
IPv6 (Internet Protocol Version 6) is a new protocol that significantly increases the
number of available Internet public IP addresses due to the 128-bit IP address structure
versus IPv4 32-bit address structure. In addition, there are several integrated
enhancements compared to the most commonly used and well known IPv4 (Internet
Protocol Version 4) such as:
•
Integrated IPsec – Better Security
•
Integrated Quality of Service (QoS) – Lower latency for real-time applications
•
Higher Efficiency of Routing – Less transmission overhead and smaller routing
tables
1. Review the IPv6 Internet Connection settings and enter information settings specified
by your ISP.
•
IPv6 – Automatic – Select Enabled for automatic configuration of your IPv6
address settings. Otherwise, if it is required to manually configure the
parameters provided by your ISP, select Disabled.
•
6rd Configuration – Select the appropriate option according to the parameters
specified by your ISP.
•
IPv4 Address – Displays the IPv4 address automatically provided by your ISP. To
manually configure the IPv4 address settings, click on Main > WAN and
configure your IPv4 settings.
•
Mask Length – Enter the IPv4 mask length used for the tunnel provided by your
ISP.
© Copyright 2013 TRENDnet. All Rights Reserved.
29
TEW-711BR
TRENDnet User’s Guide
•
Assigned IPv6 Prefix – Displays the IPv6 address automatically provided by
your ISP.
1. Log into your router management page (see “Access your router management page”
on page 27).
•
Tunnel Link-Local Address – Displays the IPv6 local link WAN (Internet)
interface address.
2. Click on Main, and click on WAN.
•
6rd Border Relay IPv4 Address – Enter the IPv4 relay address used for the
tunnel provided by your ISP.
•
Primary IPv6 DNS Server – Enter the primary IPv6 DNS server address provided
by your ISP.
3. Under your Internet connection settings, find the MAC Address section shown below.
•
Secondary IPv6 DNS Server – Enter the secondary IPv6 DNS server address
provided by your ISP.
2. To save changes, click Apply.
4. Click either Clone MAC Address to clone the MAC address of the computer you are
currently using or manually enter the 12-digit MAC address of your old router.
5. To save changes, click Apply.
Clone a MAC address
Main > WAN
On any home network, each network device has a unique MAC (Media Access Control)
address. Some ISPs register the MAC address of the device (usually a router or a
computer) connected directly to the modem. If your computer MAC address is already
registered with your ISP and to prevent the re-provisioning and registration process of a
new MAC address with your ISP, then you can clone the address (assign the registered
MAC address of your previous device to your new router). If you want to use the MAC
address from the previous device (computer or old router that directly connected to the
modem, you should first determine the MAC address of the device or computer and
manually enter it into your router using the clone MAC address feature.
Note: For many ISPs that provide dynamic IP addresses automatically, typically, the
stored MAC address in the modem is reset each time you restart the modem. If you are
installing this router for the first time, turn your modem before connecting the router to
your modem. To clear your modem stored MAC address, typically the procedure is to
disconnect power from the modem for approximately one minute, then reconnect the
power. For more details on this procedure, refer to your modem’s User Guide/Manual or
contact your ISP.
© Copyright 2013 TRENDnet. All Rights Reserved.
30
TEW-711BR
TRENDnet User’s Guide
Change your router IP address
Main > LAN & DHCP Server
In most cases, you do not need to change your router IP address settings. Typically, the
router IP address settings only needs to be changed, if you plan to use another router in
your network with the same IP address settings, if you are connecting your router to an
existing network that is already using the IP address settings your router is using, or if
you are experiencing problems establishing VPN connections to your office network
through your router.
Note: If you are not encountering any issues or are not faced with one of the cases
described above or similar, it is recommended to keep your router IP address settings as
default.
Default Router IP Address: 192.168.10.1
Default Router Network: 192.168.10.0 / 255.255.255.0
1. Log into your router management page (see “Access your router management page”
on page 27).
4. To save changes, click Apply.
Note: You will need to access your router management page using your new router IP
address to access the router management page. (e.g. Instead of using the default
http://192.168.10.1 using your new router IP address will use the following format using
your new router IP address http://(new.router.ipaddress.here) to access your router
management page.
Set up the DHCP server on your router
Main > LAN & DHCP Server
Your router can be used as a DHCP (Dynamic Host Configuration Protocol) server to
automatically assign an IP address to each computer or device on your network. The
DHCP server is enabled by default on your router. If you already have a DHCP server on
your network, or if you do not want to use your router as a DHCP server, you can disable
this setting. It is recommended to leave this setting enabled.
2. Click on Main, and click on LAN & DHCP Server.
1. Log into your router management page (see “Access your router management page”
on page 27).
3. Enter the router IP address settings.
2. Click on Main, and click on LAN & DHCP Server.
3. Review the DHCP Server settings.
•
•
•
•
IP Address – Enter the new router IP address.
(e.g. 192.168.200.1)
Subnet Mask – Enter the new router subnet mask.
(e.g. 255.255.255.0)
Note: The DHCP address range will change automatically to your new router IP
address settings so you do not have to change the DHCP address range manually to
match your new router IP address settings.
•
DHCP Server – Enable or Disable the DHCP server.
Start IP – Changes the starting address for the DHCP server range. (e.g.
192.168.10.20)
End IP – Changes the last address for the DHCP server range. (e.g.
192.168.10.30)
Note: The Start IP and End IP specify the range of IP addresses to automatically assign to
computers or devices on your network.
© Copyright 2013 TRENDnet. All Rights Reserved.
31
TEW-711BR
TRENDnet User’s Guide
•
•
Domain Name (Optional) – Specifies a domain name to assign to computers or
devices. (e.g. trendnet.com)
Lease Time – Click the drop-down list to select the lease time.
Note: The DHCP lease time is the amount of time a computer or device can keep an
IP address assigned by the DHCP server. When the lease time expires, the computer
or device will renew the IP address lease with the DHCP server, otherwise, if there is
no attempt to renew the lease, the DHCP server will reallocate the IP address to be
assigned to another computer or device.
4. To save changes, click Apply.
Set up DHCP reservation
Main > LAN & DHCP Server
DHCP (Dynamic Host Configuration Protocol) reservation (also called Static DHCP) allows
your router to assign a fixed IP address from the DHCP server IP address range to a
specific device on your network. Assigning a fixed IP address can allow you to easily
keep track of the IP addresses used on your network by your computers or devices for
future reference or configuration such as virtual server (also called port forwarding, see
“Virtual Server” on page 36) or special applications (also called port triggering, see
“Special Applications” on page 37).
1. Log into your router management page (see “Access your router management page”
on page 27).
2. Click on Main, and click on LAN & DHCP Server.
3. Review the DHCP reservation settings.
Dynamic DHCP List – You can view the list of active lease entries for computers or
devices that have been assigned IP addresses automatically from the DHCP server on
your router.
•
•
•
Static DHCP– Enable or Disable the DHCP reservation feature.
Name – Enter a name for the reservation.
IP Address – Enter the IP address to assign to the reservation. (e.g.
192.168.10.101)
Note: You cannot assign IP addresses outside of the DHCP range. The IP address is
required to be within the DHCP IP address range (Start IP & End IP).
•
•
MAC Address – Enter the MAC (Media Access Control) address of the computer
or network device to assign to the reservation. (e.g. 00:11:22:AA:BB:CC)
Add - Saves the reservation.
© Copyright 2013 TRENDnet. All Rights Reserved.
32
TEW-711BR
TRENDnet User’s Guide
Static DHCP List – You can view the list of reservations for computers or devices that
have been created in this list.
Note: It is recommended to leave this setting enabled, otherwise, you may encounter
issues with applications that utilize UPnP in order allow the required communication
between your computers or devices and the Internet.
4. To save changes, click Apply.
To modify an existing reservation, click on the entry in the Static DHCP list. When
selected, the entry will be highlighted.
Allow/deny VPN connections through your router
Management > Remote Management
•
•
•
Update – Saves changes to an existing reservation.
Delete – Removes an existing reservation.
Cancel – Discards changes to existing reservation.
Enable/disable UPnP on your router
Management > Remote Management
UPnP (Universal Plug and Play) allows devices connected to a network to discover each
other and automatically open the connections or services for specific applications (e.g.
instant messenger, online gaming applications, etc.) UPnP is enabled on your router by
default to allow specific applications required by your computers or devices to allow
connections through your router as they are needed.
A Virtual Private Network (VPN) is a network that uses a public network, such as the
Internet, to provide secure communications between a remote computer or network
and another network. Some offices often provide VPN access to their networks to
enable employees to work from their remote office/home office, or while traveling.
If your office or place of work has allowed and authorized access for you to access their
network through VPN, the default VPN settings in your router have been configured to
pass through the most common types of VPN protocols, which typically do not require
any additional configuration changes.
1. Log into your router management page (see “Access your router management page”
on page 27).
2. Click on Management, and click on Remote Management.
3. Next to PPTP, L2TP, or IPsec (depending the VPN protocol your corporation requires)
click Enabled or Disabled to turn the VPN pass through feature on or off on your router.
1. Log into your router management page (see “Access your router management page”
on page 27).
Note: It is recommended to leave these settings enabled.
2. Click on Management, and click on Remote Management.
4. To save changes, click Apply.
3. Next to UPnP, click Enabled or Disabled to turn the feature on or off on your router.
© Copyright 2013 TRENDnet. All Rights Reserved.
33
TEW-711BR
TRENDnet User’s Guide
Allow/deny multicast streaming
Management > Remote Management
In some cases, applications require multicast communication (also called IP multicast
which is the delivery of information to a specific group of computers or devices in a
single transmission) typically used in media streaming applications. Multicast streaming
is enabled by default on your router to allow applications that require multicast
communication through your router which typically does not require additional
configuration changes.
1. Log into your router management page (see “Access your router management page”
on page 27).
2. Click on Management, and click on Remote Management.
3. Next to Multicast Stream, click Enabled or Disabled to turn the feature on or off on
your router.
Note: It is recommended to leave this setting enabled.
Note: First, you will need to sign up for one of the DDNS service providers listed in the
Server Address drop-down list.
1. Sign up for one of the DDNS available service providers list under Server Address.
(e.g. dyndns.com, no-ip.com, etc.)
2. Log into your router management page (see “Access your router management page”
on page 27).
3. Click on Main and click on Dynamic DNS.
4. Next to DDNS, click Enabled.
5. In the Server Address drop-down list, select the provider you selected, and enter your
information in the fields.
•
•
4. To save changes, click Apply.
•
Host Name: Personal URL provided to you by your Dynamic DNS service
provider (e.g. www.trendnet.dyndns.biz)
User Name: The user name needed to log in to your Dynamic DNS service
account
Password: This is the password to gain access to Dynamic DNS service (NOT
your router or wireless network password) for which you have signed up to.
6. To save changes, click Apply.
Identify your network on the Internet
Main > Dynamic DNS
Since most ISPs constantly change your home IP address, providing access to devices on
your home or small office Local Area Network (such as IP Cameras) from the Internet
requires setting up a Dynamic DNS service and entering the parameters into this
management area. Dynamic DNS services allow your router to confirm its location to the
given Dynamic DNS service, thereby providing the Dynamic DNS service with the ability
to provide a virtual fixed IP address for your network. This means that even though your
ISP is always changing your IP address, the Dynamic DNS service will be able to identify
your network using a fixed address—one that can be used to view home IP Camera and
other devices on your local area network.
© Copyright 2013 TRENDnet. All Rights Reserved.
34
TEW-711BR
TRENDnet User’s Guide
Allow remote access to your router management page
Management > Remote Management
You may want to make changes to your router from a remote location such at your
office or another location while away from your home.
1. Log into your router management page (see “Access your router management page”
on page 27).
2. Click on Management, and click on Remote Management.
3. Under the HTTP section, click Enabled.
•
•
Port– It is recommended to leave this setting as 8080.
Note: If you have configured port 8080 for another configuration section such
as virtual server or special application, please change the port to use.
(Recommended port range 1024-65534)
Remote IP Range – It is recommended to leave this setting as *, to allow
remote access from anywhere on the Internet.
Note: You can enter a specific range of Internet IP addresses that are allowed to
access your router management page, all others will be denied.
DMZ
Access > DMZ
You may want to expose a specific computer or device on your network to the Internet
to allow anyone to access it. Your router includes the DMZ (Demilitarized Zone) feature
that makes all the ports and services available on the WAN/Internet side of the router
and forwards them to a single IP address (computer or network device) on your
network. The DMZ feature is an easy way of allowing access from the Internet however,
it is a very insecure technology and will open local area network to greater threats from
Internet attacks.
It is strongly recommended to use Virtual Server (also called port forwarding, see
“Virtual Server” on page 36) to allow access to your computers or network devices from
the Internet.
1. Make the computer or network device (for which you are establishing a DMZ link) has
a static IP address (or you can use the DHCP reservation feature to ensure the device
has a fixed IP address) (see “Set up DHCP reservation” on page 32).
A. Signing up for a Dynamic DNS service (outlined in the DDNS section) will
provide identification of the router’s network from the Internet.
2. Log into your router management page (see “Access your router management page”
on page 27).
3. Click on Access, and click on DMZ.
4. Next to DMZ Enable, click Enabled.
5. Next to DMZ Host IP, enter the IP address you assigned to the computer or network
device to expose to the Internet.
4. To save changes, click Apply.
6. To save changes, click Apply.
Open a device on your network to the Internet
This router can provide access to devices on your local area network to the Internet
using the Virtual Server, Special Application, method (DMZ NOT recommended).
© Copyright 2013 TRENDnet. All Rights Reserved.
35
TEW-711BR
TRENDnet User’s Guide
Virtual Server
Access > Virtual Server
Virtual Server (also called port forwarding) allows you to define specific ports (used or
required by a specific application) and forward them to a single IP address (a computer
or device) on your network. Using this feature is more secure compared to using DMZ
(see DMZ on page 35) in which DMZ forwards all ports instead of only specific ports
used by an application. An example would be forwarding a port to an IP camera
(TRENDnet IP cameras default to HTTP TCP port 80 for remote access web requests) on
your network to be able to view it over the Internet.
3. Review the virtual server settings.
Since most ISPs constantly change your home IP address, to be able to access the Virtual
Server port(s) from the Internet it is recommended to setup Dynamic DNS service (See
DynDNS section).
1. Log into your router management page (see “Access your router management page”
on page 27).
•
Enabled – Selecting Enabled turns on the virtual server and selecting Disabled
turns off the virtual server.
•
Name – Enter a name for the virtual server.
•
Protocol – Select the protocol required for your device. TCP, UDP, or you can
select Both to choose both TCP & UDP (recommended).
Note: Please refer to the device documentation to determine which ports and
protocols are required.
2. Click on Access, and click on Virtual Server.
•
Private Port – Enter the port number required by your device. Refer to the
connecting device’s documentation for reference to the network port(s)
required.
•
Public Port – Enter the port number used to access the device from the
Internet.
Note: The Public Port can be assigned a different port number than the Private Port
(also known as port redirection), however it is recommended to use the same port
number for both settings. Please refer to the device documentation to determine
which ports and protocols are required.
•
To simplify configuration, there is a list of commonly used pre-defined virtual server
entries to modify, otherwise, you can choose to manually add a new virtual server.
LAN Server – Enter the IP address of the device to forward the port (e.g.
192.168.10.101).
Note: You should assign a static IP address to the device or use DHCP reservation to
ensure the IP address of the device does not change.
© Copyright 2013 TRENDnet. All Rights Reserved.
36
TEW-711BR
TRENDnet User’s Guide
•
Add – Saves a new virtual server entry.
•
Delete – Removes an existing virtual server.
•
Update – Modifies an existing virtual server.
•
Cancel – Discard changes to an existing virtual server.
Example: To forward TCP port 80 to your IP camera
1.
2.
Setup DynDNS service (See DynDNS section).
Access TRENDnet IP Camera management page and forward Port 80 (see
product documentation)
3. Make sure to configure your network/IP camera to use a static IP address or you can
use the DHCP reservation feature (see “Set up DHCP reservation” on on page 32).
Note: You may need to reference your camera documentation on configuring a static IP
address.
4. Log into your router management page (see “Access your router management page”
on page 27).
5. Click on Access, and click on Virtual Server.
8. Click Enabled to turn on this virtual server.
9. Next to Name, you can enter another name for the virtual server, otherwise, leave
the default name.
10. Next to Protocol, make sure TCP is selected in the drop-down list.
11. The Private Port and Public Port, make sure port number 80 is configured for both
settings.
12. Next to LAN Server, enter the IP address assigned to the camera. (e.g.
192.168.10.101)
13. To save the changes, click Update.
6. In the list below, click the pre-defined virtual server entry named Virtual Server HTTP.
Note: The selected item will be highlighted in yellow when selected.
7. The fields will be populated with the selected pre-defined virtual server entry.
© Copyright 2013 TRENDnet. All Rights Reserved.
37
TEW-711BR
TRENDnet User’s Guide
Special Applications
Access > Special AP
Special applications (also called port triggering) is typically used for online gaming
applications or communication applications that require a range of ports or several
ports to be dynamically opened on request to a device on your network. The router will
wait for a request on a specific port or range of ports (or trigger port/port range) from a
device on your network and once a request is detected by your router, the router will
forward a single port or multiple ports (or incoming port/port range) to the device on
your network. This feature is not typically used as most devices and routers currently
use UPnP (Universal Plug and Play) to automatically configure your router to allow
access for applications. See “Enable/disable UPnP on your router” on page 33.
Note: Please refer to the device documentation to determine if your device supports
UPnP first, before configuring this feature.
1. Log into your router management page (see “Access your router management page”
on page 27).
3. Review the special application settings.
•
Enabled – Selecting Enabled turns on the special application and selecting
Disabled turns it off.
•
Name – Enter a name for the special application.
•
Trigger – Port or port range requested by the device.
2. Click on Access, and click on Special AP.
Protocol – Select the protocol requested by the device. TCP, UDP, or you
can select Both to choose both TCP and UDP.
Port Range – Enter the ports or port range requested by the device.
(e.g. 554-554 or 6112-6112).
Note: Please refer to the device documentation to determine which ports and protocols
are required.
•
To simplify configuration, there is a list of commonly used pre-defined special
application entries to modify, otherwise, you can choose to manually add a new special
application.
Incoming – Port(s) forwarded to the device.
Protocol – Select the protocol to be forwarded to the device. TCP,
UDP, or you can select Both to choose both TCP and UDP.
Port Range – Enter the ports or port range to be forwarded to the
device.
(e.g. 2000-2038,2069,2081,2200-2210).
Note: Please refer to the device documentation to determine which ports and protocols
are required.
© Copyright 2013 TRENDnet. All Rights Reserved.
38
TEW-711BR
TRENDnet User’s Guide
•
Add – Saves a new special application.
Add static routes to your router
Routing > Static
To modify an existing application, click on the entry in the special applications list. When
selected, the entry will be highlighted.
•
Delete – Removes an existing special application.
•
Update – Modifies an existing special application.
•
Cancel – Discard changes to an existing special application.
You may want set up your router to route computers or devices on your network to
other local networks through other routers. Generally, different networks can be
determined by the IP addressing assigned to those networks. Generally speaking and for
the case of an example, your network may have 192.168.10.x IP addressing and another
network may have 192.168.20.x IP addressing and because the IP addressing of these
two networks are different, they are separate networks. In order to communicate
between the two separate networks, static routing needs to be configured. Below is an
example diagram where routing is needed for devices and computers on your network
to access the other network.
Note: Configuring this feature assumes that you have some general networking
knowledge.
© Copyright 2013 TRENDnet. All Rights Reserved.
39
TEW-711BR
TRENDnet User’s Guide
1. Log into your router management page (see “Access your router management page”
on page 27).
To modify an existing reservation, click on the entry in the static route list. When
selected, the entry will be highlighted.
2. Click on Routing, and click on Static.
3. Review the static route settings.
•
•
•
•
•
•
Network Address – Enter the IP network address of the destination network
for the route.
(e.g. 192.168.20.0)
Network Mask – Enter the subnet mask of the destination network for the
route.
(e.g. 255.255.255.0)
Gateway Address – Enter the gateway to the destination network for the
route.
(e.g. 192.168.10.2)
Interface – Click the drop-down list and select the Interface on your router
where the route is active.
(e.g. LAN)
Metric – Enter the metric or priority of the route. The metric range is 1-15, the
lowest number 1 being the highest priority. (e.g. 1 )
•
•
•
Update – Saves changes to an existing static route.
Delete – Removes an existing static route.
Cancel – Discards changes to existing static route.
Add – Saves the static route.
© Copyright 2013 TRENDnet. All Rights Reserved.
40
TEW-711BR
TRENDnet User’s Guide
Enable dynamic routing on your router
Routing > Dynamic
You may want to setup your router to route computers or devices on your network to
other local networks through other routers. If other routers support dynamic routing
such as RIP (Routing Information Protocol), you can enable this feature on your router
to automatically learn the required routes to reach those networks. It is required that
the same dynamic routing protocol and version is also enabled on the other routers in
order your router and the other routers to exchange information about the network.
Note: Configuring this feature assumes that you have some general networking
knowledge.
RIP 1 - Receive routing information from other routers using the RIP
version 1 protocol.
RIP 2 – Receive routing information from other routers using the RIP
version 2 protocol.
4. Click Apply to save the changes or click Cancel to discard the changes.
1. Log into your router management page (see “Access your router management page”
on page 27).
2. Click on Routing, and click on Dynamic.
3. Select the appropriate dynamic routing protocol and version communicate with other
routers.
•
Transmit – Allows your router to send out network information to other
routers so other routers can dynamically build routes to your network.
•
Disabled – Disable sending routing information from your router to
other routers.
RIP 1 - Sends out routing information to other routers using the RIP
version 1 protocol.
RIP 2 – Sends out routing information to other routers using the RIP
version 2 protocol (recommended if supported by both devices).
Receive - Allows your router to receive network information from other router
so your router can build routes to other networks.
Disabled – Disable receiving routing information from other routers to
your router.
© Copyright 2013 TRENDnet. All Rights Reserved.
41
TEW-711BR
TRENDnet User’s Guide
Router Maintenance & Monitoring
Router Default Settings
Reset your router to factory defaults
Administrator User Name
admin
Tools > Settings
Administrator Password
admin
You may want to reset your router to factory defaults if you are encountering difficulties
with your router and have attempted all other troubleshooting. Before you reset your
router to defaults, if possible, you should backup your router configuration first, see
“Backup and restore your router configuration settings” on page 43.
Router IP Address
192.168.10.1
Router Subnet Mask
255.255.255.0
DHCP Server IP Range
192.168.10.101-192.168.199
Wireless
Enabled
SSID (wireless network name)
TRENDnet711
Wireless Security
Disabled
802.11 Mode
2.4GHz 802.11b/g/n mixed mode
Channel
Auto Channel
There are two methods that can be used to reset your router to factory defaults.
•
Reset Button – Located on the rear panel of your router, see “Product
Hardware Features” on page 2 . Use this method if you are encountering
difficulties with accessing your router management page.
OR
•
Router Management Page
1. Log into your router management page (see “Access your router management page”
on page 27).
2. Click on Tools and click on Settings.
3. Under Restore factory default settings, click Restore. When prompted to confirm this
action, click OK.
© Copyright 2013 TRENDnet. All Rights Reserved.
42
TEW-711BR
TRENDnet User’s Guide
Backup and restore your router configuration settings
Tools > Settings
3. Under Restore Configuration Settings, next to Load Settings, depending on your web
browser, click on Browse or Choose File.
You may have added many customized settings to your router and in the case that you
need to reset your router to default, all your customized settings would be lost and
would require you to manually reconfigure all of your router settings instead of simply
restoring from a backed up router configuration file.
To backup your router configuration:
1. Log into your router management page (see “Access your router management page”
on page 27).
A separate file navigation window should open.
2. Click on Tools and click on Settings.
4. Select the router configuration file to restore and click Load.
3. Under Save Configuration Settings and next to Save Settings, click Save.
(Default Filename: cfg.bin). If prompted, click Yes or OK.
5. Wait for the router to restore settings.
4. Depending on your web browser settings, you may be prompted to save a file (specify
the location) or the file may be downloaded automatically to the web browser settings
default download folder. (Default Filename: cfg.bin)
To restore your router configuration:
1. Log into your router management page (see “Access your router management page”
on page 27).
2. Click on Tools and click on Settings.
© Copyright 2013 TRENDnet. All Rights Reserved.
43
TEW-711BR
TRENDnet User’s Guide
Upgrade your router firmware
Tools > Firmware
TRENDnet may periodically release firmware upgrades that may add features or fix
problems associated with your TRENDnet router model and version. To check if there is
a firmware upgrade available for your device, please check your TRENDnet model and
version using the link. http://www.trendnet.com/downloads/
In addition, it is also important to verify if the latest firmware version is newer than the
one your router is currently running. To identify the firmware that is currently loaded on
your router, log in to the router, click on the Status tab and then on the Device
Information sub-tab. The firmware used by the router is listed at the top of this page. If
there is a newer version available, also review the release notes to check if there were
any new features you may want or if any problems were fixed that you may have been
experiencing.
1. Log into your router management page (see “Access your router management page”
on page 27).
2. Click on Status and click on Device Information to check your router’s current
firmware version at the top of the page.
3. Click on Tools and click on Firmware.
4. Depending on your web browser, next to Upgrade Firmware, click Browse or Choose
File.
1. If a firmware upgrade is available, download the firmware to your computer.
2. Unzip the file to a folder on your computer.
Please note the following:
•
Do not interrupt the firmware upgrade process. Do not turn off the device or
press the Reset button during the upgrade.
•
If you are upgrade the firmware using a laptop computer, ensure that the
laptop is connected to a power source or ensure that the battery is fully
charged.
•
Disable sleep mode on your computer as this may interrupt the firmware
upgrade process.
•
Do not upgrade the firmware using a wireless connection, only using a wired
network connection.
•
Any interruptions during the firmware upgrade process may permanently
damage your router.
5. Navigate to the folder on your computer where the unzipped firmware file (.bin) is
located and select it.
6. Click Upgrade. If prompted, click Yes or OK.
© Copyright 2013 TRENDnet. All Rights Reserved.
44
TEW-711BR
TRENDnet User’s Guide
Restart your router
Check connectivity using the router management page
Tools > Restart
Tools > Ping Test
You may want to restart your router if you are encountering difficulties with your router
and have attempted all other troubleshooting.
For troubleshooting purposes, you may want to check your router connectivity using the
ping (also known as a network connectivity test) test tool on your router management
page.
There are two methods that can be used to restart your router.
•
Turn the router off for 10 seconds using the router On/Off switch located on
the rear panel of your router, see “Product Hardware Features” on page 2 .
1. Log into your router management page (see “Access your router management page”
on page 27).
Use this method if you are encountering difficulties with accessing your router
management page. This is also known as a hard reboot or power cycle.
2. Click on Tools and click on Ping Test.
OR
•
Router Management Page – This is also known as a soft reboot or restart.
1. Log into your router management page (see “Access your router management page”
on page 27).
3. Enter in the IP address (e.g. 192.168.10.101) or host name (e.g. www.trendnet.com)
to test.
4. Click Ping.
2. Click on Tools and click on Restart. If prompted, click Yes or OK.
5. You will receive a success or fail result message of the address you entered providing
a basic indicating of the router’s connectivity to the Internet or devices that are
connected to your network. Click Back to bring you back to the Ping Test page.
© Copyright 2013 TRENDnet. All Rights Reserved.
45
TEW-711BR
TRENDnet User’s Guide
Check the router system information
Status > Device Information
You may want to check the system information of your router such as WAN (Internet)
connectivity, wireless and wired network settings, router MAC address, and firmware
version.
1. Log into your router management page (see “Access your router management page”
on page 27).
•
IP Address – The current IP address assigned to your router WAN port or
interface configuration.
•
Subnet Mask - The current subnet mask assigned to your router WAN port or
interface configuration.
•
Default Gateway – The current gateway assigned to your router WAN port or
interface configuration.
•
DNS (Domain Name System) – The current DNS address(es) assigned to your
router port or interface configuration.
2. Click on Status and click on Device Information.
3. Review the device information.
•
Firmware Version – The current firmware version your router is running.
•
Router Up Time – The duration your router has been running continuously
without a restart/power cycle (hard or soft reboot) or reset.
Wireless Information
WAN (Internet) Information
•
MAC Address – The current MAC address used by your router’s WAN port or
interface configuration.
•
Connection – Displays the current WAN (Internet) connection status. When
using DHCP Client (or Dynamic IP address) Internet connection type, you will
provide the option to Release and Renew your IP address settings.
•
MAC Address – The current MAC address of your router’s wireless or interface
configuration.
•
Connection – Displays the status if your wireless functionality on your router is
enabled or disabled.
•
SSID – Displays the current wireless network name assigned to your router.
•
Channel – Displays the current wireless channel your router is operating.
Authentication – Displays the current wireless security configured on your router.
Other Internet connection types such as PPPoE will provide the option to
Connect and Disconnect.
© Copyright 2013 TRENDnet. All Rights Reserved.
46
TEW-711BR
TRENDnet User’s Guide
1. Log into your router management page (see “Access your router management page”
on page 27).
2. Click on Status and click on Log.
3. Review the device log information.
Wired LAN Information
•
MAC Address – The current MAC address of your router’s wired LAN or
interface configuration.
•
IP Address - Displays your router’s current IP address.
•
Subnet Mask – Displays your router’s current subnet mask.
•
DHCP Server - Display your router’s DHCP server status, enabled or disabled,
•
Time – Displays the time of the log entry. If the time is inaccurate, make sure to
set the router date and time correctly. (See “Set your router date and time” on
page 28)
•
Type – Displays a notification regarding the type of log.
•
Message – Displays the log message.
and provides a link to the DHCP client listing.
Router Log Navigation
View your router log
Status > Log
•
First Page – Displays the first page of the log.
•
Last Page – Displays the last page of the log.
•
Previous Page – Display the log page previous to the current. The Page: 1/1 will
display the current page.
•
Next Page – Displays the log page next to the current.
•
Clear Log - Clears all logging
•
Refresh - The Page: 1/1 will display the current page.
Your router log can be used to obtain activity information on the functionality of your
router or for troubleshooting purposes.
© Copyright 2013 TRENDnet. All Rights Reserved.
47
TEW-711BR
TRENDnet User’s Guide
Configure your router log
•
Email Log Now – Click this option to send an e-mail with the current router log
using your email settings.
•
Email Logs – Select when you want the router log to be e-mailed.
Status > Log Setting
You may want send your router log to your e-mail address or to an external log server
(also known as Syslog server) so you can check it periodically while away from home.
You may also want to only see specific categories of logging.
Send router logs to your e-mail address
When log is full – The router log will be e-mailed to your e-mail
address when router internal log is full.
Click the drop-down list and configure to e-mail logs according to a set
schedule. Once on a specific day of the week or once every day.
1. Log into your router management page (see “Access your router management page”
on page 27).
2. Click on Status and click on Log Setting.
3. Review the e-mail log settings.
•
SMTP Authentication – Set this option to Enabled if your e-mail service
requires authentication. If not, leave this setting to Disabled.
Note: If you are unsure of this setting check with your e-mail service provider if
authentication is required.
•
SMTP Account – Enter your account user name for your e-mail service.
•
SMTP Password – Enter your password for your e-mail service.
•
SMTP Server – Enter the IP address (e.g. 10.10.10.10) or domain name (e.g.
mail.trendnet.com) of your e-mail server.
•
SMTP Server Port – Enter the port used by your e-mail service. (e.g. Default
SMTP Server Port: 25)
•
From Email Address – Enter a sender e-mail address. (e.g.
router@trendnet.com)
Note: This does not need to be real e-mail address, only used for identification
purposes when checking your e-mail.
•
To Email Address – Enter your e-mail address.
4. To save changes, click Apply.
Send router logs to an external log server
1. Log into your router management page (see “Access your router management page”
on page 27).
© Copyright 2013 TRENDnet. All Rights Reserved.
48
TEW-711BR
TRENDnet User’s Guide
2. Click on Status and click on Log Setting.
3. Next to Syslog Server, enter the IP address of the external log server to send router
logging.
View your router packet statistics
Status > Statistics
You may want to check your router packet statistics for informational purposes only.
1. Log into your router management page (see “Access your router management page”
on page 27).
4. To save changes, click Apply.
2. Click on Status and click on Statistic.
3. The table displays the amount of packets sent and received on your router’s wired
LAN, wireless, and WAN (Internet).
Set the types or categories to include in logging
1. Log into your router management page (see “Access your router management page”
on page 27).
2. Click on Status and click on Log Setting.
3. Next to Log Type, check the types or categories to include in logging.
View wireless devices connected to your router
Status > Wireless
You may want to check the wireless devices connected to your router.
1. Log into your router management page (see “Access your router management page”
on page 27).
2. Click on Status and click on Wireless.
3. The table displays the amount time each wireless device has been connected and the
MAC address of each wireless device.
4. To save changes, click Apply.
© Copyright 2013 TRENDnet. All Rights Reserved.
49
TEW-711BR
TRENDnet User’s Guide
Capture packets using the router management page
Enable SNMP on your router
Management > Capture Packets
Management > SNMP
You may want to use the router management page to capture data packets for further
troubleshooting and analysis. Packet captures allow you to see what type of data and
information is inside each packet. You will need a packet capture software application to
be able to open and view the packet capture files downloaded from the router.
SNMP (Simple Network Management Protocol) is a network management protocol used
to monitor (read) and/or manage (write) multiple network devices on a network. This
preconfigured external SNMP server.
1. Log into your router management page (see “Access your router management page”
on page 27).
2. Click on Management and click on Capture Packets.
3. Click on the Network Interface drop-down list and select which interface you would
like to capture data packets, LAN or WAN.
4. Review the options for capturing packets.
•
Start – Starts the packet capture.
•
Stop - Stops the packet capture
•
Download – Download the packet capture file.
1. Log into your router management page (see “Access your router management page”
on page 27).
2. Click on Management and click on SNMP.
3. Review the options for SNMP.
•
SNMP – Select Enabled to enable SNMP.
•
System Location – Enter the location. (optional)
•
System Contact – Enter the contact. (optional)
•
Community – Enter the community to match the settings with the external
SNMP server.
•
Trap Receiver 1-3 – Enter the IP address of the external SNMP trap receiver.
You can enter up to three receivers. (e.g. 192.168.10.250)
(.pcap file)
4. To save changes, click Apply.
© Copyright 2013 TRENDnet. All Rights Reserved.
50
TEW-711BR
TRENDnet User’s Guide
Router Management Page Structure
Main
•
LAN & DHCP Server
•
Tools
Routing
Static DHCP Reservation
WAN
•
•
•
Static
Dynamic
Routing Table
•
Restart
•
Settings
Clone MAC Address
•
Password
•
Time
•
Dynamic DNS
•
IPv6
Access
•
Wireless
•
Basic
•
Security
•
Advanced
•
Wi-Fi Protected Setup
Filter
MAC Filters
Domain/URL Blocking
Protocol/IP Filters
•
Virtual Server
•
Special AP
•
DMZ
•
Firewall Rule
Save Configuration Settings
Restore Configuration Settings
Reset to Factory Default
•
Firmware
•
Upgrade Firmware
•
Ping Test
Wizard
•
Setup Wizard
Management
Status
•
Device Information
•
Log
•
Log Setting
Email Log
Syslog
o Log Type
•
Statistic
•
Wireless
•
SNMP
•
Remote Management
•
Capture Packets
Routing
•
Static
•
Dynamic
•
Routing Table
© Copyright 2013 TRENDnet. All Rights Reserved.
51
TEW-711BR
TRENDnet User’s Guide
Technical Specifications
Dimensions (L x W x H)
158 x 109 x 34 mm (6.2 x 4.3 x 1.3 in)
Hardware
Weight
204 g (7.2 oz)
Standards
IEEE 802.3 (10BASE-T), IEEE 802.3u (100BASE-TX), IEEE
802.11b, IEEE 802.11g, Based on IEEE 802.11n technology,
IEEE 802.3az
Temperature
WAN
1 x 10/100Mbps Auto-MDIX WAN port (Internet)
Humidity
Max. 95% (non-condensing)
LAN
4 x 10/100Mbps Auto-MDIX LAN ports
Certifications
CE, FCC
WPS Button
Enables Wi-Fi Protected Setup (WPS) function (Hold for 3
seconds)
Wireless
Frequency
2.412 ~ 2.484 GHz ISM band
Power Switch
On/Off power switch
Antenna
1 x 2dBi fixed dipole antenna
Connection Type
Dynamic IP, Static (fixed) IP, PPPoE, PPTP, L2TP, IPv6 6rd
(IPv6 rapid deployment) DHCPv4, manual and automatic
configuration
Modulation
802.11b: CCK (11 and 5.5Mbps), DQPSK (2Mbps), DBPSK
(1Mbps)
802.11g: OFDM with BPSK, QPSK and 16/64-QAM
Supported Web Browsers
Internet Explorer 6.0 or above, Firefox 2.0 or above,
Chrome, Opera, Safari
Internet Access Control
MAC Address Filter, Domain/URL Filter, Protocol/IP Filter,
Virtual Server, DMZ host, UPnP, PPTP/L2TP/IPsec VPN
pass through
Management / Monitoring
Local/remote configuration, upgrade firmware,
Backup/Restore configuration via Web browser, Internal
System Log, Syslog, E-Mail Logging, SNMPv1/v2c, Ping
Test Tool, Dynamic DNS
Routing
LED Indicators
Power
Power Consumption
Static and Dynamic RIPv1/2
Operating: 0° ~ 40°C (32° ~ 104°F)
Storage: -10°C ~ 70°C (-14° ~ 158°F)
802.11n: BPSK, QPSK, 16QAM, 64QAM with OFDM
Media Access Protocol
CSMA/CA with ACK
Data Rate
802.11b: up to 11Mbps
802.11g: up to 54Mbps
802.11n: up to 150Mbps
802.11b: 15dBm (typical) @ 11Mbps
Output Power
802.11g: 15dBm (typical) @ 54Mbps
802.11n: 13dBm (typical) @ 150Mbps
802.11b: -85dBm (typical) @ 11Mbps
Receiving Sensitivity
802.11g: -68dBm (typical) @ 54Mbps
802.11n: -62dBm (typical) @ 150Mbps
Power, Status, LAN1 - LAN4, WAN, WLAN
Encryption
64/128-bit WEP (HEX/ASCII), WPA /WPA2-PSK,
WPA/WPA2-RADIUS
Output: 5V DC, 1A
Channels
1-11 (FCC), 1-13 (ETSI)
2.8 Watts (max)
*Maximum wireless signal rates are referenced from IEEE 802.11 theoretical specifications. Actual
data throughput and coverage will vary depending on interference, network traffic, building
materials and other conditions.
Input: 100~240V AC, 50~60Hz
© Copyright 2013 TRENDnet. All Rights Reserved.
52
TRENDnet User’s Guide
Troubleshooting
Q: I typed http://192.168.10.1 in my Internet Browser Address Bar, but an error
message says “The page cannot be displayed.” How can I access the router
management page?
Answer:
1. Check your hardware settings again. See “Router Installation” on page 2.
2. Make sure the LAN and WLAN lights are lit.
3. Make sure your network adapter TCP/IP settings are set to Obtain an IP address
automatically or DHCP (see the steps below).
4. Make sure your computer is connected to one of the router’s LAN ports
5. Press on the factory reset button for 15 seconds, the release.
Windows 7
a. Go into the Control Panel, click Network and Sharing Center.
b. Click Change Adapter Settings, right-click the Local Area Connection icon.
c. Then click Properties and click Internet Protocol Version 4 (TCP/IPv4).
d. Then click Obtain an IP address automatically and click OK.
Windows Vista
a. Go into the Control Panel, click Network and Internet.
b. Click Manage Network Connections, right-click the Local Area Connection
icon and click Properties.
c. Click Internet Protocol Version (TCP/IPv4) and then click Properties.
d. Then click Obtain an IP address automatically and click OK.
Windows XP/2000
a. Go into the Control Panel, double-click the Network Connections icon
b. Right-click the Local Area Connection icon and the click Properties.
c. Click Internet Protocol (TCP/IP) and click Properties.
d. Then click Obtain an IP address automatically and click OK.
Note: If you are experiencing difficulties, please contact your computer or operating
system manufacturer for assistance.
TEW-711BR
Q: I am not sure what type of Internet Account Type I have for my Cable/DSL
connection. How do I find out?
Answer:
Contact your Internet Service Provider (ISP) for the correct information.
Q: The Wizard does not appear when I access the router. What should I do?
Answer:
1. Click on Wizard on the left hand side.
2. Near the top of the browser, “Pop-up blocked” message may appear. Right click on
the message and select Always Allow Pop-ups from This Site.
3. Disable your browser's pop up blocker.
Q: I went through the Wizard, but I cannot get onto the Internet. What should I do?
Answer:
1. Verify that you can get onto the Internet with a direct connection into your modem
(meaning plug your computer directly to the modem and verify that your single
computer (without the help of the router) can access the Internet).
2. Power cycle your modem and router. Unplug the power to the modem and router.
Wait 30 seconds, and then reconnect the power to the modem. Wait for the modem to
fully boot up, and then reconnect the power to the router.
3. Contact your ISP and verify all the information that you have in regards to your
Internet connection settings is correct.
Q: I cannot connect wirelessly to the router. What should I do?
Answer:
1. Double check that the WLAN light on the router is lit.
2. Power cycle the router. Unplug the power to the router. Wait 15 seconds, then plug
the power back in to the router.
3. Contact the manufacturer of your wireless network adapter and make sure the
wireless network adapter is configured with the proper SSID. The preset SSID is
TRENDnet(model_number).
4. To verify whether or not wireless is enabled, login to the router management page,
click on Wireless.
5. Please see “Steps to improve wireless connectivity” on page 19 if you continue to
have wireless connectivity problems.
© Copyright 2013 TRENDnet. All Rights Reserved.
53
TEW-711BR
TRENDnet User’s Guide
Appendix
How to find your IP address?
Note: Please note that although the following procedures provided to follow for your
operating system on configuring your network settings can be used as general
guidelines, however, it is strongly recommended that you consult your computer or
operating system manufacturer directly for assistance on the proper procedure for
configuring network settings.
Command Prompt Method
Note: If you are experiencing difficulties, please contact your computer or operating
system manufacturer for assistance.
How to configure your network settings to obtain an IP address automatically or use
DHCP?
Note: Please note that although the following procedures provided to follow for your
operating system on configuring your network settings can be used as general
guidelines, however, it is strongly recommended that you consult your computer or
operating system manufacturer directly for assistance on the proper procedure for
configuring network settings.
Windows 2000/XP/Vista/7/8
1. On your keyboard, press Windows Logo+R keys simultaneously to bring up the Run
dialog box.
Windows 7/8
a. Go into the Control Panel, click Network and Sharing Center.
2. In the dialog box, type cmd to bring up the command prompt.
b. Click Change Adapter Settings, right-click the Local Area Connection icon.
3. In the command prompt, type ipconfig /all to display your IP address settings.
c. Then click Properties and click Internet Protocol Version 4 (TCP/IPv4).
MAC OS X
d. Then click Obtain an IP address automatically and click OK.
1. Navigate to your Applications folder and open Utilities.
2. Double-click on Terminal to launch the command prompt.
3. In the command prompt, type ipconfig getifaddr  to display the wired
or wireless IP address settings.
Note: en0 is typically the wired Ethernet and en1 is typically the wireless Airport
interface.
Graphical Method
MAC OS 10.6/10.5
1. From the Apple menu, select System Preferences.
2. In System Preferences, from the View menu, select Network.
3. In the Network preference window, click a network port (e.g., Ethernet, AirPort,
modem). If you are connected, you'll see your IP address settings under "Status:"
MAC OS 10.4
1. From the Apple menu, select Location, and then Network Preferences.
2. In the Network Preference window, next to "Show:", select Network Status. You'll see
your network status and your IP address settings displayed.
Windows Vista
a. Go into the Control Panel, click Network and Internet.
b. Click Manage Network Connections, right-click the Local Area Connection
icon and click Properties.
c. Click Internet Protocol Version (TCP/IPv4) and then click Properties.
d. Then click Obtain an IP address automatically and click OK.
Windows XP/2000
a. Go into the Control Panel, double-click the Network Connections icon
b. Right-click the Local Area Connection icon and the click Properties.
c. Click Internet Protocol (TCP/IP) and click Properties.
d. Then click Obtain an IP address automatically and click OK.
MAC OS 10.4/10.5/10.6
a. From the Apple, drop-down list, select System Preferences.
b. Click the Network icon.
c. From the Location drop-down list, select Automatic.
d. Select and view your Ethernet connection.
In MAC OS 10.4, from the Show drop-down list, select Built-in
Ethernet and select the TCP/IP tab.
In MAC OS 10.5/10.6, in the left column, select Ethernet.
e. Configure TCP/IP to use DHCP.
© Copyright 2013 TRENDnet. All Rights Reserved.
54
TEW-711BR
TRENDnet User’s Guide
In MAC 10.4, from the Configure IPv4, drop-down list, select Using
DHCP and click the Apply Now button.
In MAC 10.5, from the Configure drop-down list, select Using DHCP
and click the Apply button.
In MAC 10.6, from the Configure drop-down list, select Using DHCP
and click the Apply button.
f. Restart your computer.
Note: If you are experiencing difficulties, please contact your computer or operating
system manufacturer for assistance.
How to find your MAC address?
In Windows 2000/XP/Vista/7,
Your computer MAC addresses are also displayed in this window, however, you can type
getmac –v to display the MAC addresses only.
In MAC OS 10.4,
1. Apple Menu > System Preferences > Network
2. From the Show menu, select Built-in Ethernet.
3. On the Ethernet tab, the Ethernet ID is your MAC Address.
In MAC OS 10.5/10.6,
1. Apple Menu > System Preferences > Network
2. Select Ethernet from the list on the left.
3. Click the Advanced button.
3. On the Ethernet tab, the Ethernet ID is your MAC Address.
How to connect to a wireless network using the built-in Windows utility?
Note: Please note that although the following procedures provided to follow for your
operating system on configuring your network settings can be used as general
guidelines, however, it is strongly recommended that you consult your computer or
operating system manufacturer directly for assistance on the proper procedure for
connecting to a wireless network using the built-in utility.
Windows 7/8
1. Open Connect to a Network by clicking the network icon (
area.
or
) in the notification
2. In the list of available wireless networks, click the wireless network you would like to
connect to, then click Connect.
4. You may be prompted to enter a security key in order to connect to the network.
5. Enter in the security key corresponding to the wireless network, and click OK.
Windows Vista
1. Open Connect to a Network by clicking the Start Button.
To.
and then click Connect
2. In the Show list, click Wireless.
3. In the list of available wireless networks, click the wireless network you would like to
connect to, then click Connect.
4. You may be prompted to enter a security key in order to connect to the network.
5. Enter in the security key corresponding to the wireless network, and click OK.
Windows XP
1. Right-click the network icon in the notification area, then click View Available
Wireless Networks.
2. In Connect to a Network, under Available Networks, click the wireless network you
would like to connect to.
3. You may be prompted to enter a security key in order to connect to the network.
4. Enter in the security key corresponding to the wireless network, and click Connect.
© Copyright 2013 TRENDnet. All Rights Reserved.
55
TEW-711BR
TRENDnet User’s Guide
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one of the following measures:
•
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this equipment.
Europe – EU Declaration of Conformity
This product is herewith confirmed to comply with the Directive of 1999/5/EC,
2006/95/EC, and 2009/125/EC.
EC No. 278/2009
EN60950-1: 2006 + A11 : 2009 + A1 : 2010
Safety of Information Technology Equipment
EN 50385: 2002
Product standard to demonstrate the compliance of radio base stations and fixed
terminal stations for wireless telecommunication systems with the basic restrictions or
the reference levels related to human exposure to radio frequency electromagnetic
fields (110MHz - 40 GHz) - General public
EN 300 328 V1.7.1 (2006-10) Class B
Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband
transmission systems; Data transmission equipment operating in the 2,4 GHz ISM band
and using wide band modulation techniques; Harmonized EN covering essential
requirements under article 3.2 of the R&TTE Directive
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
EN 301 489-1 V1.8.1 (2008-04)
IMPORTANT NOTE:
EN 301 489-17 V2.1.1 (2009-05)
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
The availability of some specific channels and/or operational frequency bands are
country dependent and are firmware programmed at the factory to match the intended
destination. The firmware setting is not accessible by the end user.
RoHS
This product is RoHS compliant.
Electromagnetic compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic
Compatibility (EMC) standard for radio equipment and services; Part 1: Common
technical requirements
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic
Compatibility (EMC) standard for radio equipment and services; Part 17: Specific
conditions for 2,4 GHz wideband transmission systems and 5 GHz high performance
RLAN equipment
This device is a 2.4 GHz wideband transmission system (transceiver), intended for use in
all EU member states and EFTA countries, except in France and Italy where restrictive
use applies. In Italy the end-user should apply for a license at the national spectrum
authorities in order to obtain authorization to use the device for setting up outdoor
radio links and/or for supplying public access to telecommunications and/or network
services. This device may not be used for setting up outdoor radio links in France and in
some areas the RF output power may be limited to 10 mW EIRP in the frequency range
of 2454 – 2483.5 MHz. For detailed information the end-user should contact the
national spectrum authority in France.
© Copyright 2013 TRENDnet. All Rights Reserved.
56
TEW-711BR
TRENDnet User’s Guide
Česky [Czech]
Dansk [Danish]
Deutsch
[German]
TRENDnet tímto prohlašuje, že tento TEW-711BR je ve shodě se
základními požadavky a dalšími příslušnými ustanoveními směrnice
1999/5/ES, 2006/95/ES, a 2009/125/ES.
Undertegnede TRENDnet erklærer herved, at følgende udstyr TEW711BR overholder de væsentlige krav og øvrige relevante krav i
direktiv 1999/5/EF, 2006/95/EF, og 2009/125/EF.
Hiermit erklärt TRENDnet, dass sich das Gerät TEW-711BR in
Übereinstimmung mit den grundlegenden Anforderungen und den
übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG,
2006/95/EG und 2009/125/EG befindet.
Eesti [Estonian]
Käesolevaga kinnitab TRENDnet seadme TEW-711BR vastavust
direktiivi 1999/5/EÜ, 2006/95/EÜ ja 2009/125/EÜ põhinõuetele ja
nimetatud direktiivist tulenevatele teistele asjakohastele sätetele.
English
Hereby, TRENDnet, declares that this TEW-711BR is in compliance
with the essential requirements and other relevant provisions of
Directive 1999/5/EC, 2006/95/EC, and 2009/125/EC.
Español
[Spanish]
Por medio de la presente TRENDnet declara que el TEW-711BR
cumple con los requisitos esenciales y cualesquiera otras
disposiciones aplicables o exigibles de la Directiva 1999/5/CE,
2006/95/CE, 2009/125/CE y.
Ελληνική
[Greek]
ΜΕ ΤΗΝ ΠΑΡΟΥΣΑTRENDnet ΔΗΛΩΝΕΙ ΟΤΙTEW711BRΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ
ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ, 2006/95/ΕΚ,
2009/125/ΕΚ και.
Français
[French]
Par la présente TRENDnet déclare que l'appareil TEW-711BR est
conforme aux exigences essentielles et aux autres dispositions
pertinentes de la directive 1999/5/CE, 2006/95/CE, 2009/125/CE et.
Italiano[Italian]
Con la presente TRENDnet dichiara che questo TEW-711BR è
conforme ai requisiti essenziali ed alle altre disposizioni pertinenti
stabilite dalla direttiva 1999/5/CE, 2006/95/CE e 2009/125/CE.
Latviski [Latvian]
AršoTRENDnetdeklarē, ka TEW-711BR atbilstDirektīvas 1999/5/EK,
2006/95/EK, un 2009/125/EK būtiskajāmprasībām un citiemar to
saistītajiemnoteikumiem.
Lietuvių
[Lithuanian]
Direktyvos nuostatas.
Nederlands
[Dutch]
Malti [Maltese]
Magyar
[Hungarian]
Polski [Polish]
Hierbij verklaart TRENDnet dat het toestel TEW-711BR in
overeenstemming is met de essentiële eisen en de andere relevante
bepalingen van richtlijn 1999/5/EG, 2006/95/EG, en 2009/125/EG.
Hawnhekk, TRENDnet, jiddikjara li dan TEW-711BR jikkonforma malħtiġijiet essenzjali u ma provvedimenti oħrajn relevanti li hemm fidDirrettiva 1999/5/KE, 2006/95/KE, u 2009/125/KE.
Alulírott, TRENDnet nyilatkozom, hogy a TEW-711BRmegfelel a
vonatkozó alapvetõ követelményeknek és az 1999/5/EK irányelv, a
2006/95/EK és a 2009/125/EK irányelv egyéb elõírásainak.
Niniejszym TRENDnet oświadcza, że TEW-711BR jest zgodny z
zasadniczymi wymogami oraz pozostałymi stosownymi
postanowieniami Dyrektywy 1999/5/WE, 2006/95/WE i
2009/125/WE.
Português
[Portuguese]
TRENDnet declara que este TEW-711BR está conforme com os
requisitos essenciais e outras disposições da Directiva 1999/5/CE,
2006/95/CE e 2009/125/CE.
Slovensko
[Slovenian]
TRENDnet izjavlja, da je ta TEW-711BR v skladu z bistvenimi
zahtevami in ostalimi relevantnimi določili direktive 1999/5/ES,
2006/95/ES in 2009/125/ES.
Slovensky
[Slovak]
TRENDnettýmtovyhlasuje, že TEW-711BRspĺňazákladnépožiadavky a
všetkypríslušnéustanoveniaSmernice 1999/5/ES, 2006/95/ES, a
2009/125/ES.
Suomi [Finnish]
Svenska
[Swedish]
TRENDnet vakuuttaa täten että TEW-711BR tyyppinen laite on
direktiivin 1999/5/EY, 2006/95/EY ja 2009/125/EY oleellisten
vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen.
Härmed intygar TRENDnet att denna TEW-711BR står I
överensstämmelse med de väsentliga egenskapskrav och övriga
relevanta bestämmelser som framgår av direktiv 1999/5/EG,
2006/95/EG och 2009/125/EG.
Šiuo TRENDnet deklaruoja, kad šis TEW-711BR atitinka esminius
reikalavimus ir kitas 1999/5/EB, 2006/95/EB ir 2009/125/EB
© Copyright 2013 TRENDnet. All Rights Reserved.
57
Limited Warranty
TRENDnet User’s Guide
Limited Warranty
TRENDnet warrants its products against defects in material and workmanship, under
normal use and service, for the following lengths of time from the date of purchase.
TEW-711BR – 3 Years Warranty
AC/DC Power Adapter, Cooling Fan, and Power Supply carry 1 year warranty.
If a product does not operate as warranted during the applicable warranty period,
TRENDnet shall reserve the right, at its expense, to repair or replace the defective
product or part and deliver an equivalent product or part to the customer. The
repair/replacement unit’s warranty continues from the original date of purchase. All
products that are replaced become the property of TRENDnet. Replacement products
may be new or reconditioned. TRENDnet does not issue refunds or credit. Please
contact the point-of-purchase for their return policies.
TRENDnet shall not be responsible for any software, firmware, information, or memory
data of customer contained in, stored on, or integrated with any products returned to
TRENDnet pursuant to any warranty.
There are no user serviceable parts inside the product. Do not remove or attempt to
service the product by any unauthorized service center. This warranty is voided if (i) the
product has been modified or repaired by any unauthorized service center, (ii) the
product was subject to accident, abuse, or improper use (iii) the product was subject to
conditions more severe than those specified in the manual.
Warranty service may be obtained by contacting TRENDnet within the applicable
warranty period and providing a copy of the dated proof of the purchase. Upon proper
submission of required documentation a Return Material Authorization (RMA) number
will be issued. An RMA number is required in order to initiate warranty service support
for all TRENDnet products. Products that are sent to TRENDnet for RMA service must
have the RMA number marked on the outside of return packages and sent to TRENDnet
prepaid, insured and packaged appropriately for safe shipment. Customers shipping
from outside of the USA and Canada are responsible for return shipping fees. Customers
shipping from outside of the USA are responsible for custom charges, including but not
limited to, duty, tax, and other fees.
WARRANTIES EXCLUSIVE: IF THE TRENDNET PRODUCT DOES NOT OPERATE AS
WARRANTED ABOVE, THE CUSTOMER’S SOLE REMEDY SHALL BE, AT TRENDNET’S
OPTION, REPAIR OR REPLACE. THE FOREGOING WARRANTIES AND REMEDIES ARE
EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED,
EITHER IN FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE, INCLUDING
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
TRENDNET NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR
IT ANY OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION MAINTENANCE
OR USE OF TRENDNET’S PRODUCTS.
TRENDNET SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND
EXAMINATION DISCLOSE THAT THE ALLEGED DEFECT IN THE PRODUCT DOES NOT EXIST
OR WAS CAUSED BY CUSTOMER’S OR ANY THIRD PERSON’S MISUSE, NEGLECT,
IMPROPER INSTALLATION OR TESTING, UNAUTHORIZED ATTEMPTS TO REPAIR OR
MODIFY, OR ANY OTHER CAUSE BEYOND THE RANGE OF THE INTENDED USE, OR BY
ACCIDENT, FIRE, LIGHTNING, OR OTHER HAZARD.
LIMITATION OF LIABILITY: TO THE FULL EXTENT ALLOWED BY LAW TRENDNET ALSO
EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY LIABILITY, WHETHER BASED IN
CONTRACT OR TORT (INCLUDING NEGLIGENCE), FOR INCIDENTAL, CONSEQUENTIAL,
INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND, OR FOR LOSS OF REVENUE OR
PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR DATE, OR OTHER FINANCIAL
LOSS ARISING OUT OF OR IN CONNECTION WITH THE SALE, INSTALLATION,
MAINTENANCE, USE, PERFORMANCE, FAILURE, OR INTERRUPTION OF THE POSSIBILITY
OF SUCH DAMAGES, AND LIMITS ITS LIABILITY TO REPAIR, REPLACEMENT, OR REFUND
OF THE PURCHASE PRICE PAID, AT TRENDNET’S OPTION. THIS DISCLAIMER OF LIABILITY
FOR DAMAGES WILL NOT BE AFFECTED IF ANY REMEDY PROVIDED HEREIN SHALL FAIL
OF ITS ESSENTIAL PURPOSE.
Governing Law: This Limited Warranty shall be governed by the laws of the state of
California.
Some TRENDnet products include software code written by third party developers.
These codes are subject to the GNU General Public License ("GPL") or GNU Lesser
General Public License ("LGPL").
Go to http://www.trendnet.com/gpl or http://www.trendnet.com Download section
and look for the desired TRENDnet product to access to the GPL Code or LGPL Code.
These codes are distributed WITHOUT WARRANTY and are subject to the copyrights of
the developers. TRENDnet does not provide technical support for these codes. Please go
to http://www.gnu.org/licenses/gpl.txt or http://www.gnu.org/licenses/lgpl.txt for
specific terms of each license.
PWP05202009v2
2013/01/07
© Copyright 2013 TRENDnet. All Rights Reserved.
58


---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Annotate, Fill forms
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Modify Date                     : 2014:03:03 20:23:53+08:00
Create Date                     : 2013:01:11 10:16:21-08:00
Metadata Date                   : 2014:03:03 20:23:53+08:00
Creator Tool                    : Acrobat PDFMaker 10.1 for Word
Document ID                     : uuid:9cc0da88-7645-421b-bd99-d9ff66b44b6d
Instance ID                     : uuid:21579bb8-e67d-4701-b73f-4d761556dbb2
Subject                         : 25
Format                          : application/pdf
Title                           : test 3
Description                     : 
Creator                         : Jonathan
Producer                        : Adobe PDF Library 10.0
Keywords                        : 
Source Modified                 : D:20130111181606
Company                         : 
Has XFA                         : No
Page Count                      : 62
Page Layout                     : OneColumn
Author                          : Jonathan

EXIF Metadata provided by EXIF.tools