TRENDNET TVIP662-862 HD Wireless Day/Night PTZ Cloud Camera, Megapixel Wireless Day/Night PTZ Network Camera User Manual test 3

TRENDNET, Inc. HD Wireless Day/Night PTZ Cloud Camera, Megapixel Wireless Day/Night PTZ Network Camera test 3

Contents

User Manual (TV IP862IC).pdf

                   TRENDnet User’s Guide Cover Page
                   ©  Copyright 2013 TRENDnet. All Rights Reserved.       TRENDnet User’s Guide Table of Contents i Contents  Product Overview ................................................................................. 1 Package Contents .......................................................................................................... 1 Features ......................................................................................................................... 1 Product Hardware Features........................................................................................... 2 Installation ............................................................................................ 3 Wired Connection ..................................................................................................... 3 WPS Connection ........................................................................................................ 3 Wall mount installation ............................................................................................. 4 Starting the TRENDnet Cloud Service ..................................................... 4 Image A (connecting using WPS) ................................................................................... 4 Image B (wired connection) ........................................................................................... 5 Cloud Mode 1: ............................................................................................................... 6 Cloud Mode 2: ............................................................................................................... 7 Cloud Mode 3: ............................................................................................................... 7 Using the AutoRun Wizard .................................................................. 13 Wireless Connection .................................................................................................... 18 Using WPS ............................................................................................................... 18 Connecting Wireless Network Manually ................................................................. 21 Mobile Apps........................................................................................ 25 Configuration ...................................................................................... 27 Main Web User Interface ............................................................................................ 31 Camera Toolbar ........................................................................................................... 32 Setup ............................................................................................................................ 32 Wizard .......................................................................................................................... 33 Step 1: LAN Settings ................................................................................................. 33 Step 2: Internet Settings .......................................................................................... 34 Step 3: DDNS Settings .............................................................................................. 34 Step 4: Camera Name Settings ................................................................................ 34 Step 5: Time Settings ............................................................................................... 35 Step 6: Setup Complete ........................................................................................... 35 Configuring Camera Settings ....................................................................................... 36 System – Time and Date .......................................................................................... 37 Network ................................................................................................................... 38 Audio/Video – Image Setup ..................................................................................... 45 How to setup/access the camera remotely .......................................... 61 Technical Specifications ...................................................................... 64 Troubleshooting ................................................................................. 71
                   ©  Copyright 2013 TRENDnet. All Rights Reserved.       TRENDnet User’s Guide TV-IP862IC  1 Product Overview                        TV-IP862IC    Package Contents In addition to your camera, the package includes:  Multi-Language Quick Installation Guide  CD-ROM (Utility & User’s Guide)  Network cable (1.8m / 6ft)  Power adapter (12V DC, 1A) If any package contents are missing or damaged, please contact the retail store, online retailer, or reseller/distributor that the item was purchased. Features  TV-IP862IC (高畫質無線夜視旋轉雲端攝影機) The TV-IP862IC records at 1280x720 pixels (VGA), 30 FPS (frames per second). You can manage  up  to  32  TRENDnet  cameras  with  the  included  complimentary  camera management  software.  The  TV-IP862IC  also  includes  adjustable  motion  detection recording areas, email alerts, and scheduled recording sessions. Some other features of this device is Pan/Tilt auto-patrol, date-and-time overlays, one-way audio, an adjustable lens,  and  four  times  digital  zoom.  A  wall/ceiling  mounting  kit  is  included  and  the camera’s off white housing blends into most environments. Easy Installation  The  TV-IP862IC  includes  a  CD-ROM  with  a  setup  wizard  that  guides  you  through  the installation process.  Wide Platform Support  The TV-IP862IC supports TCP/IP networking, HTTP, and other Internet related protocols. The  TV-IP862IC  can  be  integrated  easily  into  other  Internet/Intranet  applications because of its standards-based features.  10/100 Ethernet Support  The TV-IP862IC supports 10/100 Ethernet.  Web Configuration  Once  setup  is  complete,  administrators  can  use  a  standard  web  browser  to;  access images  and  video,  configure  the  camera  over  an  intranet  or  over  the  Internet. Administration  by  a  web  browser  over  the  internet  means  the  IP  camera  can  be accessed and administered from anywhere in the world.  Broad Range of Applications  With today’s high-speed Internet connections, many scenarios for the application of your network camera exist, including industrial and public monitoring of properties such as homes, offices, banks, hospitals, child-care centers and amusement parks. Pan & Tilt The TV-IP862IC can pan side to side at a remarkable 330 degrees. Recording Quality The TV-IP862IC can record 1280x720 (720p) video resolution.
                   ©  Copyright 2013 TRENDnet. All Rights Reserved.       TRENDnet User’s Guide TV-IP862IC  2 Product Hardware Features  Rear Panel View        LAN Port – Connect Ethernet cables to your wired network devices.   Power Port – Connect the included power adapter from your camera to an available power outlet. Note: Use only the adapter that came with your camera.  Reset Button – Use an item such as a paperclip to push and hold this button for 3 seconds and release to reset your camera to its factory defaults.    WPS (Wi-Fi Protected Setup) – Push and hold this button for 3 seconds to activate WPS. The button LED is blinking green when WPS is activated.  Antenna – 2dBi detachable antenna.  Line Out – Insert an external microphone to this connection.  Micro SD Slot – Insert a micro SD card into this slot to store video/image data.  Rear Air Vent – This is to cool theTV-IP862IC.  Front Panel View        IR LED – Built-in 6 IR LED for night vision uses. (for TV-IP862IC)  Light Sensor – Detects the light source to turn IR on or off.  Focus Ring – Turn to adjust the focus of the camera.   Microphone – Built-in microphone for audio can be turn on or off.  Power – This LED indicator is solid blue when your camera is powered on. Otherwise if this LED indicator is off, there is no power to your camera.   Link – This LED indicator is blinking green when there is connection/data to your camera.  Camera Lens – The camera   IR LED LineOut LAN port Light Sensor Microphone Camera Lens Power/Link LED  WPS button Reset button Focus Ring  Rear Air Vents Micro SD Slot WPS Indicator Light Power port
                   ©  Copyright 2013 TRENDnet. All Rights Reserved.       TRENDnet User’s Guide TV-IP862IC  3 Installation  Wired Connection  1. Connect the Ethernet Cable If you intend to use the network camera as a wired device, connect one end of the  included  Ethernet  cable  into  the  Ethernet  port  on  the  rear  panel  of  the camera and connect the other end to an available port on your network. If you prefer to use the camera on a wireless network, see below for instructions on connecting the power adapter.  2. Attach the Power Supply Attach  the  included  power  supply  to  the  DC 12V  1.0A  receptor  on  the  rear panel of the camera and then connect it to a wall outlet or power strip. A blue LED will light up under the lens indicating that the camera has power.   WPS Connection   An alternative method of connecting your camera to your network is by using WPS. WPS is a quick, simple and secure method of adding devices to a network. If you have a router which supports WPS follow the steps below, otherwise, please use the wired mode of setting up the camera.  1. Attach the Power Supply  2. Press the WPS button on your wireless device then press the WPS button on the camera.
                   ©  Copyright 2013 TRENDnet. All Rights Reserved.       TRENDnet User’s Guide TV-IP862IC  4    Wall mount installation  To attach the metal plates carry out the following:  Remove the two rubber pads under the base of the Camera.  Slide the metal plate onto the base of the camera, making sure that the two holes on the base of the camera align with the two screw holes on the base of the camera.  Secure the metal plate to the base of the Camera with the two screws provided.  The camera can now be mounted to the ceiling or a wall. See the diagram below for more information.   Starting the TRENDnet Cloud Service When you first purchase the TV-IP862IC, it’s already configured to run on the internet out of the box. To do this, you will need the following:  The TV-IP862IC must be connected to the internet  A DHCP router with WPS enabled or the camera connected to a LAN connection. Note: The TV-IP862IC must be connected to the network and Internet to work. Follow these steps to setup the process: 1. Look underneath the camera for a similar URL  (http://73859116.cam.trendnetcloud.com) on the label. Write it down 2. Connect the power cable to the camera.  There are two methods to connect to the Internet, wired and wireless. For wireless, follow the instructions from Image A below. For wired, follow the instructions from Image B below. Image A (connecting using WPS)
                   ©  Copyright 2013 TRENDnet. All Rights Reserved.       TRENDnet User’s Guide TV-IP862IC  5  Image B (wired connection)   3. Open  your  browser,  type  the  URL  listed  on  the  label  of your  camera  and  hit Enter to connect to the camera’s live stream. Please note: you can also use this URL to connect to the camera from any location or computer. No matter which setup procedure you wish to use, once you have entered the URL into your browser, you start to have access to the cloud.  You are prompted to install the plug-in needed for TRENDnet access. Click Install.  The log-in screen appears. Enter the default username (admin) and the default password (admin) and click Login. If you don’t want to use the information you just typed in, click Reset and reenter your data.  The next step is to accept the Terms of Use. Click the checkbox and click Next.
                   ©  Copyright 2013 TRENDnet. All Rights Reserved.       TRENDnet User’s Guide TV-IP862IC  6  The next step is, changing the username and password. Enter a username and the existing password. Enter the new password and re-type it to confirm it. Click OK to complete.  The next screen verifies your settings are successful. Click Login.  Now, login with the new username and password and click Login.  The camera now displays the Cloud view via the TRENDnet cloud service.  If you look under the Live View, you will notice Mode 1. The first login method is for MODE 1. If you wish to access the other modes, please go to the Settings panel. Here is a quick rundown of what the three different modes are:  Cloud Mode 1: Mode 1 indicates the camera is connecting directly to the internet or local network. This mode offers configuration and management options.
                   ©  Copyright 2013 TRENDnet. All Rights Reserved.       TRENDnet User’s Guide TV-IP862IC  7  Cloud Mode 2: Mode 2 indicates the camera is connecting to media in a peer-to-peer fashion to the Internet or local network. This mode offers configuration and management options but not an Advanced Configuration mode.  Cloud Mode 3: Mode 3 indicates the camera is connecting to the Internet or local network through a firewall. This mode offers configuration and management options but without Advanced configuration – just live streaming for 5 minutes (the last 60 seconds is in countdown format). The firewall settings limits live streaming for each user. The “red” notification at the bottom of the viewing area warns users of the limited time. Refresh this screen continuously if you wish to view your camera’s live stream.   When you first login to the Cloud Service, you need to read the service agreement. Click the Accept checkbox and click Next.
                   ©  Copyright 2013 TRENDnet. All Rights Reserved.       TRENDnet User’s Guide TV-IP862IC  8  Create a Username, enter an existing Password, and enter a new Password. Please note the password must be at least 8 characters long. Re-enter the Password to confirm and click OK.  The cloud service recognizes your changes and confirms the edit. Click Login.  After you login, this is the main Cloud Service screen.  What’s on the interface?
                   ©  Copyright 2013 TRENDnet. All Rights Reserved.       TRENDnet User’s Guide TV-IP862IC  9 1. The camera model name. 2. Live View mode. 3. Mode type 4. Notifications (Info on camera) 5. Pan/Tilt Control (Camera directional remote control) 6. Preset List (Select the Preset Position you want to view.) 7. Edit a Preset Name and Preset Position. 8. Audio. Click this button to toggle between Sound and Mute. 9. Microphone. Toggle between On/Off. 10. Snapshot – take a snapshot 11. Start recording. Toggle between Start/Stop 12. Configure settings in the cloud service. 13. Profiles (Select the camera profile). 14. Aspect Ratio (Zoom in and zoom out.) 15. Click to logout 16. Username 17. Camera Image 18. Fit to screen 19. Product Registration Under Configure settings in the cloud service, there are various options you can reference to configure. Go through the different options to toggle cloud settings. For Video Configuration 1. Profile: Select a Profile from the drop-down list. 2. Encoding Type: Select your video encoding type from the drop-down list. 3. Resolution: Select the video resolution size from the drop-down menu. 4. Frame Rate: Select the frame rate speed from the drop-down menu. 5. Encoding Method: Select an encoding method from the drop-down menu. 6. Bit Rate: Select the camera bitrate from the drop-down menu. Click OK to put the changes into effect.   For Audio Configuration 1. Click to enable the speaker. 2. Adjust the volume. 3. Click to enable the microphone. 4. Adjust the microphone volume. Click OK to complete these settings.
                   ©  Copyright 2013 TRENDnet. All Rights Reserved.       TRENDnet User’s Guide TV-IP862IC  10  For Image Configuration 1. Brightness: Use the slider to adjust the brightness. 2. Contrast: Use the slider to adjust the contrast. 3. Saturation: Use the slider to adjust the saturation. 4. Hue: Use the slider to adjust the hue. 5. Mirror: Click the checkbox to mirror the image. 6. Flip: Click the checkbox to flip the image. 7. Black and White: Click the checkbox to change the image to black and white. Click OK to complete these settings.  For System Configuration 1. Username: Only change the Admin username here. 2. Existing Password: Enter the existing Admin Password. 3. New Password: Enter the new password. 4. Confirm the Password: Enter the new password again. Click OK to complete the settings.
                   ©  Copyright 2013 TRENDnet. All Rights Reserved.       TRENDnet User’s Guide TV-IP862IC  11 For User Configuration 1. Manual Recording and Snapshot/Set Folder Storage – Click the button to Select the directory you want to save your recordings and images. Once you have highlighted the folder you wish to use, click OK.  Locate the folder/directory where you want to store your data, select it and click OK.  For Advanced Configuration (Please Note: Only Admin can use this option in Mode 1) 1. Advanced Camera Settings: Click the Settings button to be redirected your IP camera. This configuration method is similar to the one you already have locally if you use your local IP address.  During this process you are redirected to your external IP address which is the camera’s webpage.  Profiles: - Camera View: The current cloud-based system allows you to set 4Profiles for each camera you setup. Select which video settings you want to view and create a profile.
                   ©  Copyright 2013 TRENDnet. All Rights Reserved.       TRENDnet User’s Guide TV-IP862IC  12  Zoom in and zoom out: Click this icon to zoom in and zoom out. Each camera selection appears as you select a viewing option or view the aspect ratio using this icon.  Logout: Use this link to logout Username: View the current user connected to the cloud.  : This is a Fit-to-Screen icon.     This is a Fit-to-Normal icon  Click this area to resize the screen back to normal view.  Camera: This is the camera view
                   ©  Copyright 2013 TRENDnet. All Rights Reserved.       TRENDnet User’s Guide TV-IP862IC  13 Using the AutoRun Wizard  Insert the included CD-ROM into your CD/DVD drive. The Install Wizard program will run automatically. Note:  If the Install Wizard does not run, you may have autorun disabled on your machine. In this case, browse to the CD drive and run InstallWizard.exe to begin the installation wizard. Begin by selecting a language from the drop-down list. There is a choice of five languages – English, French, German, Spanish, and Russian. Next, click  Install Camera and follow the on-screen steps to continue the installation.  English   French  German  Spanish
                   ©  Copyright 2013 TRENDnet. All Rights Reserved.       TRENDnet User’s Guide TV-IP862IC  14  Russian  1. This is TRENDnet’s Terms of Use. Click Agree to continue.  2. The next step references information on the camera itself. Go to your camera and check the details at the bottom of the device. Click Next to continue, Back to go to the previous screen or Home to return to the Main Menu. Also enclosed, is a sticker with the same details attached.  3. The most important part of the setup process is the network connection type. There are three options: a. Connect camera to your network using a network cable  b. Connect camera to your wireless network using Wi-Fi Protected Setup (WPS) button (Verify your router has a WPS button. If not, select the next option).
                   ©  Copyright 2013 TRENDnet. All Rights Reserved.       TRENDnet User’s Guide TV-IP862IC  15  c. Connect camera to your wireless network manually.  4. The basic connection type is “A” using a network cable. Let’s begin the installation process using the network cable connection first. Click this radio button and click Next to continue, Back to go to the previous screen or Home to return to the Main Menu.  5. Follow the instructions in the next screen to Power up the Camera. Connect one end of the power adapter to the camera and watch the LED flicker. Click Next to continue, Back to go to the previous screen or Home to return to the Main Menu.  6. Connect one end of the network cable to your camera and the other end to your router. Click Next to continue, Back to go to the previous screen or Home to return to the Main Menu.
                   ©  Copyright 2013 TRENDnet. All Rights Reserved.       TRENDnet User’s Guide TV-IP862IC  16   7. The wizard searches the network for your camera.  8. If you only have one camera on your network, the wizard will automatically select it (as shown below). Otherwise, if you have more than one camera, it provides several options from the list. The wizard provides the Model Name and MAC Address of the camera. If you do not see any of your camera(s) in the wizard, click Retry to scan for the camera again. Click Next to continue, Back to go to the previous screen or Home to return to the Main Menu.  9. Password Settings. Follow the instructions on the screen. The default username and password is admin. Tick the Change Password checkbox to enter the new password details. The password should be between 8 and 16 characters. Click Next to continue, Back to go to the previous screen or Home to return to the Main Menu.  If you have entered the incorrect admin details, you are prompted to change the configuration, as shown below.
                   ©  Copyright 2013 TRENDnet. All Rights Reserved.       TRENDnet User’s Guide TV-IP862IC  17  If the password length is less than 8 characters, you are also prompted to alter the configuration, as shown below.  10. The wizard configures your parameters.  11. The initial setup is complete. The main feature is the Cloud Access accessibility feature. Click the link(s) or icon below to create a shortcut on your desktop. Also, below the icon is a warning. This warning is only shown when the internet connection is inactive or the Cloud server cannot be found. Make sure the internet connection is active, click Retry. When the Cloud server isn’t found, the server may be busy or under maintenance. Under these circumstances, click Retry later again. If there is no warning, click Next.  Click on the product image to create a shortcut on the desktop. A shortcut is created.
                   ©  Copyright 2013 TRENDnet. All Rights Reserved.       TRENDnet User’s Guide TV-IP862IC  18  Click the link provided to browse the settings in the browser. 12. The mobile option allows the user to download the TRENDnet Cloud App in either Apple iOS or Android™1 format. To use this feature, the user must have a Barcode Scanner App on their mobile device. This is also available from the Apple App Store or Google Play™2.  You are now ready to use your camera. Click Finish to exit. Wireless Connection Using WPS                                                                   1 Android is a trademark of Google Inc. 2 Google Play is a trademark of Google Inc.  Please consider these points before using WPS.  Find the access point (AP) or wireless router you wish to connect to from the Available AP drop down menu.  In most cases you should leave the Channel set to Auto as the AP will determine the channel of operation.  Select the type of authentication and encryption required by the access point and enter the Key required to connect. Click Next to continue, Back to go to the previous screen or Home to return to the Main Menu. Please read the next steps carefully as it pertains to the WPS feature on your router and camera. 1. Follow the instructions on the screen to Power up the Camera. Click Next to continue, Back to go to the previous screen or Home to return to the Main Menu.
                   ©  Copyright 2013 TRENDnet. All Rights Reserved.       TRENDnet User’s Guide TV-IP862IC  19  2. Follow the instructions and click Next to continue. If you wish to go to the previous screen, click Back or Home to return to the main menu.  3. The camera now searches for the settings you chose.  4. If you only have one camera on your network, the wizard will automatically select it (as shown below). Otherwise, if you have more than one camera, it provides several options from the list. The wizard provides the Model Name and MAC Address of the camera. If you do not see any of your camera(s) in the wizard, click Retry to scan for the camera again. Click Next to continue, Back to go to the previous screen or Home to return to the Main Menu.
                   ©  Copyright 2013 TRENDnet. All Rights Reserved.       TRENDnet User’s Guide TV-IP862IC  20 5. Password Settings. Follow the instructions on the screen. The default username and password is admin. Tick the Change Password checkbox to enter the new password details. The password should be between 8 and 16 characters. Click Next to continue, Back to go to the previous screen or Home to return to the Main Menu.  6. The wizard configures your parameters.  7. The initial setup is complete. The main feature is the Cloud Access accessibility feature. Click the link(s) or icon below to create a shortcut on your desktop. Also, below the icon is a warning. This warning is only shown when the internet connection is inactive or the Cloud server cannot be found. Make sure the internet connection is active, click Retry. When the Cloud server isn’t found, the server may be busy or under maintenance. Under these circumstances, click Retry later again. If there is no warning, click Next.   8. The mobile option allows the user to download the TRENDnet Cloud App in either Apple iOS or Android™ format. To use this feature, the user must have a Barcode Scanner App on their mobile device. This is also available from the Apple App Store or Google Play™. You are now ready to use your camera. Click Finish to exit.
                   ©  Copyright 2013 TRENDnet. All Rights Reserved.       TRENDnet User’s Guide TV-IP862IC  21 You are now ready to use your camera. Click Finish to exit. Connecting Wireless Network Manually   1. Follow the instructions in the next screen to Power up the Camera. Click Next to continue, Back to go to the previous screen or Home to return to the Main Menu.  2. Connect one end of the network cable to your camera and the other end to your router. Click Next to continue, Back to go to the previous screen or Home to return to the Main Menu.   3. The wizard searches the network for your camera.  4. If you only have one camera on your network, the wizard will automatically select it (as shown below). Otherwise, if you have more than one camera, it provides several options from the list. The wizard provides the Model Name and MAC Address of the camera. If you do not see any of your camera(s) in the wizard, click Retry to scan for the camera again. Click Next to continue, Back to go to the previous screen or Home to return to the Main Menu.
                   ©  Copyright 2013 TRENDnet. All Rights Reserved.       TRENDnet User’s Guide TV-IP862IC  22  5. Password Settings. Follow the instructions on the screen. The default username and password is admin. Tick the Change Password checkbox to enter the new password details. The password should be between 8 and 16 characters. Click Next to continue, Back to go to the previous screen or Home to return to the Main Menu.  6. The wizard configures your parameters.  7. Once your wireless network is discovered, the wizard provides you with an option to select the Available Wireless Network and also to provide a Wireless Network Password. If you do not see your wireless network details, click the Rescan link to scan the network again.
                   ©  Copyright 2013 TRENDnet. All Rights Reserved.       TRENDnet User’s Guide TV-IP862IC  23 8. The wizard searches for wireless Access Points. Click the Rescan button at any time if you want to find your AP. Once it finds the wireless AP you are looking for, select it and enter the wireless network password of the AP. Click Next to continue.  9. Next, you are prompted to disconnect your network cable from the camera/router. Click Next to continue, Back to go to the previous screen or Home to return to the Main Menu.  10. The camera is connecting to the wireless network.    11. The initial setup is complete. The main feature is the Cloud Access accessibility feature. Click the link(s) or icon below to create a shortcut on your desktop. Also, below the icon is a warning message. This warning message is only shown when the internet connection is inactive or the cloud server cannot be found. Make sure the internet connection is active, click Retry. When the Cloud server isn’t found, the server may be busy or under maintenance. Under these circumstances, click Retry again. If there is no warning, click Next.
                   ©  Copyright 2013 TRENDnet. All Rights Reserved.       TRENDnet User’s Guide TV-IP862IC  24   12. The mobile option allows the user to download the TRENDnet Cloud App in either Apple iOS or Android™ format. To use this feature, the user must have a Barcode Scanner App on their mobile device. This is also available from the Apple App Store or Google Play™. You are now ready to use your camera. Click Finish to exit.  You are now ready to use your camera. Click Finish to exit.
                   ©  Copyright 2013 TRENDnet. All Rights Reserved.       TRENDnet User’s Guide TV-IP862IC  25 Mobile Apps Using your mobile3 device, in this example it is an Android phone, touch the Bar Code scanning app on your phone. Hold it up to the QR Code on the wizard that reads, Android, and snap to scan the image. The Bar Code app will read the QR Code and record it.   The app copies the QR link and provides a HTML link to the TRENDnet app. Click on the link.                                                                    3 Please use the Quick Installation Guide to install the mobile applications or learn how to use mobile accessibility.  You will be directed to the Google Play™ Storefront to download the app.   Download the app, install it and use the app on your mobile device to view the TRENDnet camera.
                   ©  Copyright 2013 TRENDnet. All Rights Reserved.       TRENDnet User’s Guide TV-IP862IC  26 Here is Apple iTunes version    Scan the QR Code using one of IOS’s QR Code apps. The app automatically creates an HTML link to the iTunes App Store. Link the link.   You are immediately directed to the iTunes App Store. Click the link to download.
                   ©  Copyright 2013 TRENDnet. All Rights Reserved.       TRENDnet User’s Guide TV-IP862IC  27 Configuration  After  completing  the  AutoRun  Wizard,  you  are  ready  to  use  your  camera.  The camera’s built-in  Web configuration utility is designed to allow you to easily access and configure your TV-IP862IC camera. Open a web browser such as Internet Explorer® and enter the IP address of your camera (Default IP Address: http://192.168.10.30). To log in, type the Username admin and the password you created in the Setup Wizard. If you did not  create  a  password,  the default password is  admin.  After  entering  your  password, click OK.   These initial steps are using Internet Explorer.  When you log in for the first time, the TRENDnet Cloud Terms of Use appears. Tick the Accept check box and click Next.    The Change Your Account page appears. Under Admin User Name, leave it as “admin” or change it accordingly. Enter the Old Password, enter the New Password, and then re-enter the New Password to confirm it. Click OK to continue. Click Cancel if you wish to discontinue.    The camera saves the information you have entered and restarts in 10 seconds.
                   ©  Copyright 2013 TRENDnet. All Rights Reserved.       TRENDnet User’s Guide TV-IP862IC  28  The Congratulations page appears. Click Login to go to the Login page again. To log in, enter the Username admin and the newly created password. This page only appears at the first time log in.    The home page for the TV-IP862IC appears. Now enter the new username and password you just created and click Log In.   PLEASE NOTE: Depending on the browser you are using, download the plugin needed to view and access the camera feed.  After you have logged in, you need to install the plug-in required. Click the link below the camera view finder to install the plug-in.   The plug-in is saved to your Downloads Folder. Click it to begin the installation. Click Run to start the process.
                   ©  Copyright 2013 TRENDnet. All Rights Reserved.       TRENDnet User’s Guide TV-IP862IC  29  Click Next to continue.  The Camera stream control application is installed.  Make sure all browsers are closed.  Click the “Close All” button to close all browser windows. Click the “Retry” button to attempt it again or click the Cancel button to exit the plug-in installer.
                   ©  Copyright 2013 TRENDnet. All Rights Reserved.       TRENDnet User’s Guide TV-IP862IC  30  Refresh your browser and the live camera image is displayed.  This is the Microsoft Internet Explorer plug-in installation. When you open your Internet Explorer, you cannot view the camera stream. Log-in using the default username and password.  The screen below displays this. At the top of the browser is a pop-up which prompts you to add the TRENDnet add-on.  Click the ActiveX pop-up to install it.  Another pop-up appears to warn you of installing an add-on. Accept the add-on and click the Install button.
                   ©  Copyright 2013 TRENDnet. All Rights Reserved.       TRENDnet User’s Guide TV-IP862IC  31  Once the add-on is installed, Internet Explorer will display the streaming image. The image below is displayed in both Internet Explorer and Chrome.   Main Web User Interface   1. Live View – view the live image. 2. Setup – Configure the camera settings. 3. Registration – Register your device with TRENDnet. 4. Record button – Click this button to enable recording. 5. Sound/Motion Trigger – Click this button to activate sound and motion. 6. Directional Controller – Control the direction of the camera. 7. Pan Button – Click this button to pan the camera. 8. Patrol Button – Click this button for the camera to patrol the viewing area. 9. Stop – Click this button to stop al Pan/ Tilt/Patrol. 10. Go To – Select a preset position from the drop-down menu. 11. Pan Speed – Select a Pan speed from the drop-down menu. 12. Tilt Speed – Select a Tilt speed from the drop-down menu. 13. Language – Select a language from the drop-down menu. 14. Displays the timestamp. 15. Displays the live image. 16. Product name and Model number.
                   ©  Copyright 2013 TRENDnet. All Rights Reserved.       TRENDnet User’s Guide TV-IP862IC  32 Camera Toolbar  COMPONENT DESCRIPTION Passive Profile This profile, in grey, means the camera is deselected. Active Profile This profile, in yellow, means the camera is selected. Full Screen Mode The viewable screen is expanded to full screen mode. Snapshot Click this button to take a snapshot of image in the viewfinder. Storage Folder Select this icon to select the folder where you want to store video feeds. Audio Click this button to toggle between sound and mute. Microphone Click this button to use the microphone on the camera and listen to incoming audio. IR LED Click this button to toggle the on/off IR LED Day/Night mode. Zoom In/Zoom Out There are different zoom options under Zoom In/Zoom Out. The viewing angle can be zoomed in from 1 times, 2 times, and 4 times. Mode Level There are four modes available: Mode 1, 2, 3, 4.  Setup View camera settings: 1. Login to the camera  2. Click Setup. The main configurable screen appears. From the menu on the left side of the screen, select an option.
                   ©  Copyright 2013 TRENDnet. All Rights Reserved.       TRENDnet User’s Guide TV-IP862IC  33 Wizard The first screen in the Setup panel displays a Welcome to Internet Connection Setup Wizard. Click Next to continue.  Step 1: LAN Settings Under LAN Settings you are provided with two choices, IPv4 Settings and IPv6 Settings. Select DHCP for the router to choose your IP address. Click Next.  For Static options, click Static IP Address.   In the Static IP address field, type in the IPv4 IP Address, the Subnet Mask, Default Gateway, Primary DNS and/or Secondary DNS servers. There is also an option to include a Search Domain if you have one. When you configure static IP settings, click the radio button next to IPv6 Static IP Address. The field now extends to further options. Type in the IPv6 IP Address in the field provided. Then enter the Default Gateway details, a Primary DNS, and a secondary DNS.
                   ©  Copyright 2013 TRENDnet. All Rights Reserved.       TRENDnet User’s Guide TV-IP862IC  34  Click the Next button to continue. Step 2: Internet Settings If your ISP requires a username and password, now is the time to complete the empty fields. Click the Enable checkbox. Enter a Username and Password, and click the Next button.   Step 3: DDNS Settings Under DDNS Settings, click the checkbox to enable this feature. In Server Address, select one of the domains from the drop-down menu. The field to the left of the drop-down menu automatically populates. Under Host Name enter the name the DDNS service provided. Enter a Username and Password, repeat the password and finally enter the Timeout. Timeout states the time DDNS is updated. Click Next to continue.    Step 4: Camera Name Settings Enter a name for the camera. This feature is helpful when you have more than one camera setup. When complete, click Next.
                   ©  Copyright 2013 TRENDnet. All Rights Reserved.       TRENDnet User’s Guide TV-IP862IC  35   Step 5: Time Settings From the drop-down menu, select a Time Zone. Click the checkbox to enable daylight saving. To edit further options, either select Auto Daylight Saving or Set DST manually. Auto Daylight will set the Daylight Savings time for you automatically. If you select DST manually, you can offset the time within 1-2 hours. Then select a start time and an end time from the drop-down menus provided. You can also click the “Keep current date and time” which maintains the current time and date of the camera. Other options include, “Synchronize with Network Time Protocol server”. Ask your administrator if you have a server like this. The last option, “Setup a Date and Time manually”, allows you to manually configure the date and time from the drop-down menus provided. Alternatively, you can also click “Sync with Computer Time”. This uses the current time settings on the computer you are using to sync with the camera’s. Click Next to continue.     Step 6: Setup Complete This is the final screen of the wizard. It shows the configuration options you selected. Click Apply to make the changes. After you click through, a notice will appear to mention that the camera will restart in 60 seconds and that its saving. After it restarts, you are directed back to the start of the wizard.
                   ©  Copyright 2013 TRENDnet. All Rights Reserved.       TRENDnet User’s Guide TV-IP862IC  36 Configuring Camera Settings  The TV-IP862IC allows you to make configuration changes from anywhere by connecting to the camera using a standard web browser. To configure camera settings: 1. Login  to  the  camera  as  described  in  the  section  Using  the  web-based configuration interface. 2. Click System. The system status screen appears. Admin Password Settings  In  this  section  there  are  two  configuration  parts  – Admin  and  Time  and  Date.  These settings  can  be  configured  using  the  Setup  Wizard  but  if  you  have  already  done  the wizard and want to return to these settings, this is the place to do it. 1.  Enter the Old Password (30 characters is the maximum length) 2.  Enter the New Password (30 characters is the maximum length) 3. Confirm New Password – Repeat the password you have just entered. 4.  Click Save. Please Note the password can only contain: Alphanumeric: A-Z, a-z, 0-9, and Special Characters: !, @, #, $, % Add User Account 1. User Name – enter a new username in this field. 2. New Password – enter a password for the user in this field. 3. Confirm New Password – Repeat the password you have just entered. 4.  Click Add to continue.  User List The User  List is now populated with the name(s) of the user(s) you have added to the above configuration. If you wish to delete a user, select the user from the drop-down list and click Delete.  Authentication 1. RTSP  Authentication –  click  the  checkbox  if  you  wish  to  enable  the authentication of Real-time Transport Streaming Protocol 2. HTTP  Authentication –  click  the  checkbox  if  you  wish  to  enable  HTTP authentication. 3. Snapshot  URL  Authentication –  click  the  checkbox  if  you  wish  to  enable snapshot authentication of the current video stream using the hyperlink next to it. 4.  Click Save to continue. Device Settings 1. Camera Name – In this field enter a name for the camera. 2. OSD – Click the OSD checkbox if you wish to have an On-screen display. 3. Label – If you have clicked the OSD previously, enter a name under the Label field to make the name visible. Also, click the Time Stamp checkbox if you wish to add a timestamp to the image. Click Save to continue. 4. LED Light – From the drop-down list, you have the option to select Power/Link, Off, or  Blinking.  These  options  allow  you  to  adjust  the  LED  settings according  to  your requirements. 5. Calibrate  the  Device – Click the Calibrate the Device button to  do exactly what it says. The camera will now pan and tilt to get the system into calibration mode.
                   ©  Copyright 2013 TRENDnet. All Rights Reserved.       TRENDnet User’s Guide TV-IP862IC  37  System – Time and Date Under Time Zone, select your region from the drop-down list  If  you  need  to  setup  Daylight  Saving  time,  click  the  Enable  Daylight  Saving checkbox.   The two options available are Auto Daylight Saving and Set DST Manually. Click Auto Daylight Saving to allow the camera to automatically adjust Daylight savings time.  Select Set DST Manually if you wish to set the Daylight Savings time yourself. A configurable  drop-down  menu  appears  allowing  you  to  set  the  Daylight  time according to your requirements. Select an Offset time and from the drop-down list  (Month,  Week,  Day,  Hour,  and  Minute)  select  a  Start  Time  and  an  End Time.  Automatic Time Configuration Click the Synchronize with NTP Server checkbox to enable this feature. An NTP Server field opens to prompt you to enter the server details.   Enter the server details otherwise consult your administrator for server details.
                   ©  Copyright 2013 TRENDnet. All Rights Reserved.       TRENDnet User’s Guide TV-IP862IC  38  Set Date and Time Manually Click the Setup Date and Time Manually checkbox to enable this feature. Here you have the option to select a Year, Month, Day, Hour, Minute, and Second or just click Copy Your Computer’s Time button. Click Apply to continue.  Network In  this  section  there  are  five  configuration  parts  –  Network,  Wireless  Setup,  Dynamic DNS, Cloud Setting, and Cloud Status. These settings can be configured using the Setup Wizard but if you  have already  done the wizard and want to return to these  settings, this is the place to do it. LAN Settings There  are  wired  LAN  settings  and  wireless  settings.  For  LAN  settings  follow  these instructions: 1.  Select the radio button next to DHCP Connection under LAN Settings 2.  Set the HTTP Port or leave the default at 80. 3.  Set the RTSP Port or leave the default at 554. 4.  Under UPnP, check the UPnP checkbox if you wish to use UPnP and the same goes for UPnP Port Forward. 5. If you use Bonjour for Mac’s, click the Bonjour checkbox under Apple.
                   ©  Copyright 2013 TRENDnet. All Rights Reserved.       TRENDnet User’s Guide TV-IP862IC  39 For Static IP Address issues follow these steps (Best suited for experienced users):  1.  Select the radio button next to Static IP Address under LAN Settings 2.  Enter the IPv4 IP address in the field provided. 3.  Set the Subnet Mask. 4.  Set the Default Gateway IP settings from your router 5.  Lastly, set the optional Primary and Secondary DNS fields. 6.  Click Apply to complete the configuration.  If  you  are  connecting  the  camera  directly  to  a  PPPoE  network,  the  camera  also  has configuration options for that.   1.  Click the PPPoE checkbox. The viewable window will scroll down to reveal more options. 2.  Enter  the  User  Name  and  Password/Confirm  Password  details.  The  Status should indicate a Success or Failure (if you have a failure please consult your network administrator or your internet provider)  3.  Set the Port Settings, HTTP Port and RTSP Port. 4.  Set the UPnP settings, UPnP and UPnP Port Forward. 5.  Lastly, set the Apple, Bonjour settings. 6.  Click Apply to complete the configuration.   Network – Wireless Setup Click the Enable Wireless button to start using this wireless function. This function takes a while to restart the camera.
                   ©  Copyright 2013 TRENDnet. All Rights Reserved.       TRENDnet User’s Guide TV-IP862IC  40     After the camera has restarted, the wireless configuration options become available.  1.  Check  the  Wireless  checkbox.  The camera  automatically  starts  scanning  your wireless area. 2.  Enter a name in the Network Name field manually, or select a wireless network router from the drop-down list under Site Survey. 3.  Under Wireless Mode select between Infrastructure and Ad-hoc  mode.  Infrastructure Mode - An 802.11 networking framework in which devices communicate with  each  other  by  first  going  through  an  Access  Point  (AP).  In  infrastructure  mode, wireless  devices  can  communicate  with  each  other or can communicate with a wired network.  Ad-Hoc  - An 802.11  networking  framework in which  devices  or  stations communicate directly with each other, without the use of an access point (AP).  Under Security Mode select between None, WEP, WPA-PSK, and WPA2-PSK.  None – means no security  WEP  -  a  security  protocol  for  wireless  local  area  networks  (WLANs)  defined  in  the 802.11b  standard.  WEP  is  designed  to  provide  the  same  level  of  security  as  that  of  a wired LAN. LANs are inherently more secure than WLANs because LANs are somewhat protected by the physicalities of their structure, having some or all part of the network inside  a  building  that  can  be  protected  from  unauthorized  access.  WLANs,  which  are over  radio  waves,  do  not  have  the  same  physical  structure  and  therefore  are  more vulnerable  to  tampering.  WEP aims to provide  security  by  encrypting  data  over radio waves so that it is protected as it is transmitted from one end point to another.   WPA-PSK  - uses a pass-phrase, which is between 8  and 63 characters long.  This pass-phrase is created and entered by the user into any client station’s configuration utility, as well as into the AP. (A recommendation: do not pick a password already in use within the  network,  and  do  not  use  a  variation  of  your  office  address.)  Generally,  when creating or setting up a wireless LAN, the first thing to be configured is the AP, which is then followed by the configuration of client stations. Configuring an AP depends largely upon  the  manufacturer’s  instructions;  client  station  configuration  is  where  the  real choices about security come into play.  WPA2-PSK  - it  is a  method  of securing  your  network using WPA2  with  the use of the optional  Pre-Shared  Key  (PSK)  authentication,  which  was  designed  for  home  users without an enterprise authentication server. To encrypt a network with WPA2-PSK you provide  your  router  not  with  an  encryption  key,  but  rather  with  a  plain-English passphrase between 8 and 63 characters long.  Depending on what Security Mode you are using, enter the Key in the key field next to Key. Click the Show Hidden Key if you wish to see what you are typing.  Click Apply to continue.
                   ©  Copyright 2013 TRENDnet. All Rights Reserved.       TRENDnet User’s Guide TV-IP862IC  41   Network – Dynamic DNS – Dynamic DNS Settings Dynamic DNS is a method of keeping a domain name linked to a changing IP address as not all computers use static IP addresses. Typically, when a user connects to the Internet, the user’s ISP assigns an unused IP address from a pool of IP addresses, and this address is  used  only  for  the  duration  of  that  specific  connection.  This  method  of  dynamically assigning addresses extends the usable pool  of available IP addresses. A dynamic DNS service provider uses a special program that runs on the user’s computer, contacting the DNS  service  each  time  the  IP  address  provided  by  the  ISP  changes  and  subsequently updating the DNS database to reflect the change in IP address.  1.  Click the DDNS checkbox to enable DDNS settings. 2.  Select the DDNS Server from the drop-down list. 3.  Enter the Host Name you setup on this online server. 4.  Enter a User Name in the field provided. 5.  Enter a Password and confirm the Password. 6.  Enter  a  Timeout,  in  hours,  for  the  length  you  want  the  connection  to  stay active. 7.  Click Apply. The Status should change if you have configured the online DNS settings correctly.
                   ©  Copyright 2013 TRENDnet. All Rights Reserved.       TRENDnet User’s Guide TV-IP862IC  42 Network – Cloud Setting – Cloud Setting This section covers connecting to the cloud. What is a cloud? Cloud computing is being able to connect to your TV-IP862IC from any location. You can access and control the device via the internet. To do this, click the radio button next to the Enable button. Click Apply. Your selection is saved but there will not be any notification.  Network – Cloud Status – Cloud Status This section shows you the hyperlink to your cloud connection. Once you click the link, your browser opens to the cloud interface. Click Refresh to update the image.
                   ©  Copyright 2013 TRENDnet. All Rights Reserved.       TRENDnet User’s Guide TV-IP862IC  43 Audio /Video In this section  there are  two configuration parts  – Audio and  Video and Image Setup. These settings can be configured using the Setup Wizard but if you have already done the wizard and want to return to these settings, this is the place to do it. Audio and Video – Video Profile  Under  each  profile  settings  there  are  six  main  functions,  Encoder  Type,  Resolution, Frames per Second, Encode Method, bps, and RTSP URL settings. Encode Type: This sets the file format and file quality. Resolution: This is the size of your image.  Frames Per Second: This is the speed at which each frame is captured. Encode Method: Is your Constant Bit Rate. bps: Is the transmission speed of your data (4Mbps-64Kbps). RTSP URL: is the RTSP URL where video streaming is accessed. Each Profile offers different specifications. Select the specifications that best suite you. Audio and Video - Video Profile 1: Encode Type – H.264 & MPEG4 Resolution – 1280x720/640X352/320X176/160X80 FPS – 30/15/10/6/5/3/2/1 Encode Method – Two options available: CBR/Quality. CBR and Quality can be defined as such. When users choose the CBR encode method, the camera selects the bitrate as the first priority. The TV-IP862IC will adjust the image quality to fit the bitrate. When the user chooses the Quality encode method, the camera select the bitrate to fit the quality bps: 4Mbps/3Mbps/2Mbps/1.5Mbps/1Mbps/768Kbps/512Kbps/384Kbps/256Kbps/128Kbps/64Kbps Quality – Low/Fair/Standard/Good/Excellent  RTSP URL – play1.sdp   Audio and Video – Video Profile 2 Encode Type – H.264 & MPEG4 Resolution –640X352/320X176/160X80 FPS – 30/15/10/6/5/3/2/1 Encode Method – CBR/Quality bps  – 4Mbps/3Mbps/2Mbps/1.5Mbps/1Mbps/768Kbps/512Kbps/384Kbps/256Kbps/128Kbps/64Kbps Quality – Low/Fair/Standard/Good/Excellent RTSP URL – play2.sdp
                   ©  Copyright 2013 TRENDnet. All Rights Reserved.       TRENDnet User’s Guide TV-IP862IC  44   Audio and Video – Video Profile 3 Encode Type – JPEG Resolution –1280x720/640X352/320X176/160X80 FPS – 30/15/10/6/5/3/2/1 Encode Method –Quality Quality – Low/Fair/Standard/Good/Excellent RTSP URL – play3.sdp   Video Profile Four for Mobile Devices Only - Options: Encode Type – H.264 & MPEG4 Resolution – 1280x720/640X352/320X176/160X80 FPS – 30/15/10/6/5/3/2/1 Encode Method – CBR/Quality Bps  – 4Mbps/3Mbps/2Mbps/1.5Mbps/1Mbps/768Kbps/512Kbps/384Kbps/256Kbps/128Kbps/64Kbps Quality – Low/Fair/Standard/Good/Excellent RTSP URL – 3gpp   Day/Night Mode  The TV-IP862IC allows users to record data in day and night mode. The TV-IP862IC has LED’s for night mode. This section provides day and night options. You can select it to run automatically, manually, in constant day mode or constant night mode.    Toggle this switch On/Off Day/Night Settings When you select "Day" mode, the viewing image is in normal "color" mode. However, when you use "Night" mode, the viewing image turns black and white. The reason for this  is  to  create  a  clearer  and  smoother  image.  When  you  select  "Auto"  mode,  the Day/Night function is concealed.  Please Note: This allows you to set the camera to switch automatically from day to night mode (default) or to permanently set the color and Black/White operations. Also note, even when the camera is set to color mode, it will switch to Black/White night vision if there is no longer enough ambient light to support the color saturation.  Auto  Mode  -  The  camera  automatically  removes  the  filter  by  gauging  the  amount  of ambient light entering the lens.
                   ©  Copyright 2013 TRENDnet. All Rights Reserved.       TRENDnet User’s Guide TV-IP862IC  45 Day Mode - In Day Mode, the camera switches on the IR cut filter to block infrared light from reaching the sensor so colors aren't distorted. Night Mode - In Night Mode, the camera switches off the IR cut filter so the sensor can accept infradred light, helping to improve low light sensitivity.  Audio Setup The TV-IP862IC allows users to record and broadcast audio. Click the Speaker checkbox to change the volume settings on the camera’s speaker. Click the Microphone checkbox and select your preference from the volume drop-down list. Click Apply to continue.   Audio/Video – Image Setup Just like any camera, you are able to make changes to the image settings. With the TV-IP862IC, you can change the Brightness, Contrast, color scheme to Black/White, Flip the image,  change  the  Frequency,  Shutter  Speed,  Saturation,  Hue,  Mirror,  Auto  Exposure and White Balancing. The settings can be viewed “live” through the LIVE VIDEO display in the forefront image If you wish to discard the changes you made click the Reset to Default button.
                   ©  Copyright 2013 TRENDnet. All Rights Reserved.       TRENDnet User’s Guide TV-IP862IC  46  Action – Recording In  this  section  there  are  five  configuration  parts  –  Recording,  Video  Clip,  Snapshot, Preset Position, and SD Management. This option allows you to record constantly. If you select Always bear in mind that the Recording Type should be Video and that the source usually comes from Profiles 1, 2 or 4 under Source. Make sure the  Micro SD Card settings are setup to accommodate the huge  storage  space  required  for  Always  connections.  Click  Apply  to  complete  the configuration.  Trigger By – Schedule  This option allows you to record according to the schedule you setup. If you select Schedule a calendar of the days of the week appear. Here you can select from each day’s checkbox which days you want to setup and you can create a start and end time. Click Apply to complete the configuration.  Trigger By – Motion  This option allows you to record according to the motion parameters you setup. If you select Motion, click the Schedule during checkbox. Then a calendar of the days of the week will appear. Here you can click one of the days checkboxes and you can create a start and end time. The Recording Type changes to pre-event or pre-event settings. This means the camera will start recording before the motion event is observed and after the motion event is inactive. These times can only be set in seconds. Click Apply to complete the configuration.
                   ©  Copyright 2013 TRENDnet. All Rights Reserved.       TRENDnet User’s Guide TV-IP862IC  47  Trigger By: Sound This option allows you to record according to the audio parameters you setup. If you select Sound, click the Schedule checkbox. You can now configure this by clicking the checkbox of the days of the week. You can edit the Start and End times. Under Recording Type, edit the Pre-event recording and Post-event recording times. Decide whether you want to take a Snapshot or Video. Select the source, File Format, and Recording Time duration (in minutes).    Recording Type The two main sections here are Snapshot and Video. Snapshot takes a picture from your recorded data and only works with Profile 3. Video captures source data from Profiles 1, 2, and 4 which is configurable in Video/Audio settings. Recording data can be recorded in increments of 1-6 minutes.  Target – Micro SD Card Keep  Free  Space  is  used  to  set  the  capacity  of  your  Micro  SD  card,  preventing  the system from becoming unstable. Recycle Click here to recycle  the material on your Micro SD card. When the Micro  SD card is full all previous data is removed or recorded over thereby freeing up space. These settings depend  on  the size  of your SD  card. The larger  your SD card  the more storage space you have to record data. Recording data can be recorded in increments of 1-6 minutes. Cyclic settings can also be checked.  Target - Samba Network Device
                   ©  Copyright 2013 TRENDnet. All Rights Reserved.       TRENDnet User’s Guide TV-IP862IC  48 The Samba  Network Device requires a NAS server or a linux server to operate. Under Server,  enter  the  server  address.  Click  the  Anonymous  radio  button  to  allow anonymous users to send files to the Samba server. Then enter the Share  Folder, Sub Folder (if needed) and enter the Disk Space needed. Lastly, click the Recycle checkbox if you want to recycle data in the Share Folder. This is useful when you don’t need to keep all the recorded material.  If you click the Account radio button, then enter a Username and Password. This will authenticate the user every time they log on to the samba server. Then enter the Share Folder, Sub Folder (if needed) and enter the Keep Disk Space needed. Lastly, click the Recycle checkbox if you want to recycle data in the Share Folder. This is useful when you don’t need to keep all the recorded material. Remember to click the Apply button whenever you want to save your changes. Anonymous View  Account View   Recording features: Function Recording Video Clip Snapshot Note Trigger Type Always Y Y Y   Motion Y Y Y   Motion with Schedule Y Y Y   Schedule Y Y Y   Sound Y Y Y
                   ©  Copyright 2013 TRENDnet. All Rights Reserved.       TRENDnet User’s Guide TV-IP862IC  49 Sound with Schedule Y Y Y   Video profile Options 3 3 1 * For recording and video, the available video options are profile 1/2/4. * For snapshot, the default video option is profile 3. Target E-Mail N Y Y   FTP N Y Y   SD card Y N N   Samba Y N N   Recording Type Pre-Event Y Y Y * It's only supported when trigger by Motion/Sound is activated. * Snapshot, it’s activated using 6 snapshots only. Post Event Y N Y * It's only supported when trigger by Motion/Sound is activated. * Snapshot, it's activated using 6 snapshots only. Real Time Y Y Y    Action – Video Clip Click the Video Clip checkbox to activate video recording events. There are three main sections:  Trigger By: Always, Motion, Schedule, and Sound Video Clip Type: Configure the recording options  Target:  The targets available are FTP and E-mail. If you want to record data to an FTP server, click FTP. If you want to record data to an E-mail account click E-mail.  The Trigger by and Video Clip settings are similar to the options under Recording Type. Please see the above description for details. Video Clip - Target  Target offers two variables, FTP or Email. You cannot select both. If you select FTP enter the details as laid out in the FTP field.  FTP Server – this is your FTP server address Port – this is the default FTP Port (21) address Username – the username your FTP administrator provided Password – the password your FTP administrator assigned you Path – the directory Filename Prefix – the filename you are using to access the data or save the data to Interval – The interval range is set between 60 and 86400. The default interval is 300 seconds.  The  interval  determines  the  time  between two  video clips,  and  is  only  used when you trigger, Always and Schedule. Send  next  FTP after – The range is 0 to 86400. The default setting is 10 seconds. This determines  the  interval  to  send  the  next  video  clip  once  the  previous  video  clip  has
                   ©  Copyright 2013 TRENDnet. All Rights Reserved.       TRENDnet User’s Guide TV-IP862IC  50 finished uploading from the FTP server. It’s only available when trigger by Motion and Sound is applied.  Passive Mode – It’s used as Server/client initiation access to bypass any proxies. Click the Test button if you wish to verify your FTP server information. Click Apply to confirm the configuration settings.  For Email  Recipient E-mail Address – the email address you want to send information to SMTP Mail Server – the mail server domain details Port - the default Port number (465) Username – the username settings provided by your email administrator Password - the password settings provided by your email administrator Sender Email Address – the email address of the sender Interval –  The interval range is  60  to  86400.  The default  interval is 600 seconds. This determines  the  time  between  two  video  clips,  and  is  only  used  when  you  trigger  by Always and Schedule. Send next email after – This determines the interval to send the next video clip after the previous  video  clip  is  completed  via  E-mail.  It’s  only  available  when  you  trigger  by Motion and Sound.  Send next email after – the alert email interval times Use  SSL-TLS – this is a secure method (please consult your administrator before using this setting). There are three options available: None, SSL-TLS or STARTTLS.  Click the Test button to proceed with a test. This will authenticate the email details with your email server. If the authentication is positive the test will be complete. If the test is a failure, the result will not be successful. Click Apply to confirm the configuration settings.   Action – Snapshot These settings control SNAPSHOT settings for your camera. The Trigger by settings are similar to settings above, so please view the settings above. The Snapshot Type provides for a Single snapshot or 6 snapshots at 1-2 second intervals. The Target FTP and Email
                   ©  Copyright 2013 TRENDnet. All Rights Reserved.       TRENDnet User’s Guide TV-IP862IC  51 settings  are  similar  to  settings  explained  above.  Please  read  the  configuration  in  the above explanation. Click Apply to confirm the configuration settings.  Snapshot - Target Target offers two variables, FTP or Email. You cannot select both. If you select FTP enter the details as layed out in the FTP field. Click Apply to confirm the configuration settings.  FTP Server – this is your FTP server address Port – this is the default FTP Port (21) address Username – the username your FTP administrator provided Password – the password your FTP administrator assigned you Path – the directory Filename Prefix – the filename you are using to access the data or save the data to Interval – The interval range is set between 60 and 86400. The default interval is 300 seconds.  The  interval  determines  the  time  between two  video clips,  and  is  only  used when you trigger, Always and Schedule. Send  next  FTP after – The range is 0 to 86400. The default setting is 10 seconds. This determines  the  interval  to  send  the  next  video  clip  once  the  previous  video  clip  has finished uploading from the FTP server. It’s only available when trigger by Motion and Sound is applied. Passive Mode – It’s used as Server/client initiation access to bypass any proxies. Click the Test button if you wish to verify your FTP server information. Click Apply to confirm the configuration settings.    For Email Recipient E-mail Address – the email address you want to send information to SMTP Mail Server – the mail server domain details Port - the default Port number (465) Username – the username settings provided by your email administrator. Password - the password settings provided by your email administrator. Sender Email Address – the email address of the sender. Interval –  The interval range is  60  to 86400. The default  interval is 600 seconds.  This determines  the  time  between  two  video  clips,  and  is  only  used  when  you  trigger  by Always and Schedule.
                   ©  Copyright 2013 TRENDnet. All Rights Reserved.       TRENDnet User’s Guide TV-IP862IC  52 Send next email after – This determines the interval to send the next video clip after the previous  video  clip  is  completed  via  E-mail.  It’s  only  available  when  you  trigger  by Motion and Sound. Send next email after – the alert email interval times Use  SSL-TLS – this is a secure method (please consult your administrator before using this setting). There are three options available, None, SSL-TLS or STARTTLS.   Click the Test button to proceed with a test. This will authenticate the email details with your email server. If the authentication is positive the test will be complete. If the test is a failure, the result will not be successful. Click Apply to confirm the configuration settings.   Action Preset Position Preset Position  This screen shows the software Pan/Tilt functions. You can set preset positions for fast authentication. Most of the screen is taken up by the camera image. On the right of the main screen is the Pan/Tilt dial.  Preset Position 1. Preset Name – Enter a name in the field provided to give the position a name. 2.  Click Add. 3.  To set a new Preset Position – Use the Pan & Tilt dial to select your Pan & Tilt speeds and select the position. 4.  Use the Set As Home button to choose it as your home screen. 5.  Click  the  Default  Home  button  if  you  wish  to  use  this  configuration  as  your default home viewing area. 6. Preset Locations –Is a list of presets you can setup under Preset Position. This list is populated with different camera views and angles.  Preset Locations The Preset Locations is a list of presets you have setup under Preset Position. This list is populated with different camera views and angles.  Patrol Position This  area  is  where  you  setup  the  movement  of  the  Pan/Tilt  during  a  particular  time frame. This Patrol Position can be setup with different Pan/Patrol Speeds and Dwelling time(s)  in  seconds.  The  Dwelling  Time  is  the  duration  the  camera  takes  to  span  a particular area.
                   ©  Copyright 2013 TRENDnet. All Rights Reserved.       TRENDnet User’s Guide TV-IP862IC  53 1. Setup  the  Preset  Position –  Once  you  have  setup  the  Preset  in  the  previous configuration list, select it from the Preset Locations. 2.  Click the Select button to transfer this preset to the Patrol Position. 3.  Set the position of your Preset. This depends on the priority of Patrol Position – which item you want to make your priority. 4.  For  each  Patrol  Position  you  can  adjust  the  Dwelling  Time  (in  seconds).  This indicates the time needed to span each Preset while Patrolling. 5.  Click Save to continue and finish the process.  Action – SD Management SD Card The TV-IP862IC has a tiny Micro SD card slots at the back of the camera. Micro SD cards are smaller than normal SD cards and require an adapter to work properly in a Micro SD slot. Here you can format the SD card, select how many files you want to display on a page, delete a page and also delete a file. When inserting a Micro SD card for the first time, make  sure you don’t have any important  data  stored on  the card  because once you format the drive that data is lost.  1.  Format the SD Card 2.  Select how many files you want to display per page. 3.  Setup recording by going to Action, Recording. 4.  Designate space for the recording and click Apply. 5.  To delete a file. Select the file from the list, click the Delete checkbox and click Apply.
                   ©  Copyright 2013 TRENDnet. All Rights Reserved.       TRENDnet User’s Guide TV-IP862IC  54 Motion Detection In  this  section  there  are  five  configuration  parts  –  Video  Motion,  Sensitivity,  and Drawing  Mode.  Each  of  these  components  derives  its  feature  set  from  a  live  video stream.  Motion Detection – Live Video Video Motion Settings 1.  Draw  a  red  rectangle  around  the  area  on  the  viewable  screen  you  wish  to monitor. 2.  Click the Enable Video Motion checkbox 3.  Under  Sensitivity,  enter  a  percentage  of  how  sensitive  you  want  the  motion detection to be. 1% is low and 100% is the most sensitive. 4.  Click Apply to enforce your configuration. Editing Video Motion Settings 1.   Under Drawing Mode, click Erase motion area to erase the red rectangle from the screen and motion field. or Click the Clear   button to remove the video motion field. 2.  Click Apply to accept your configuration changes.  Sound Detection Sound detection allows the camera to pick up audio from the TV-IP862IC. When you enable sound detection, the camera listens for sounds based on the sensitivity level you created. The lower the sensitivity level the easier it is for the camera to detect sounds, thereby activating the camera to start recording. Click the checkbox to enable it. Then, in the drop-down list, next to Detection Sensitivity Level, choose the level you want to use. It ranges from 50-90. Click Apply when you are finished.  Tools In this section there are two configuration parts – System, and Firmware Upgrade.  Tools – System The first configurable option is: Backup Configuration File. Click the Backup button to save this file to your local hard drive. Then click Save to save it.
                   ©  Copyright 2013 TRENDnet. All Rights Reserved.       TRENDnet User’s Guide TV-IP862IC  55    Tools – System – Restore Configuration This feature allows you to restore the file you just saved above, and restore the system to the configuration it was previously at. Click the Browse button to locate the file. Once you have found the file, click Restore. This puts the file back in the system and you are able to click the Restore button to activate it.  Reset to Factory Defaults Click the Reset button to restore the TV-IP862IC to its original state.  Reboot Camera Click the Reboot button to reboot the TV-IP862IC. If the camera should freeze for some reason or if you need to reload software, or restart it when using the Micro SD card click the Reboot button.
                   ©  Copyright 2013 TRENDnet. All Rights Reserved.       TRENDnet User’s Guide TV-IP862IC  56   Tools – Firmware Upgrade This  window  shows  all  the  details  of  your  current  firmware.  It  shows  your  Current Firmware Version number and your Current Firmware Build Number. When you want to upgrade to the latest firmware, go to the Trendnet site, download the latest firmware, save it to a folder on your computer.  1.  Click the Browse button to locate the firmware on your computer. 2.  Select the file, click Open  . 3.  Click OK to continue. 4.  A warning message appears at the top of the screen asking you not to turn anything off.
                   ©  Copyright 2013 TRENDnet. All Rights Reserved.       TRENDnet User’s Guide TV-IP862IC  57 Advanced Advanced – Device Info In this section there are two configuration parts – Device Info and Log. Advanced – Device Info – Information  The  Device  Information  highlights  everything  about  the  TV-IP862IC  camera.  All information refer to the primary software functions on the TV-IP862IC. The list includes the following:  Camera Name – the name of the camera – TV-IP862IC. Time and Date – the current time and date on the camera. Firmware Version – the latest firmware running on the camera. Firmware Build Number – the software factory build number. Agent Version – This is the agent number. MAC Address – This is the MAC address assigned to the device. IPv4 Address – the current IP address. IPv4 Subnet Mask – the current Subnet Mask. IPv4 Default Gateway – the gateway of your router. IPv4 Primary DNS – the primary DNS assigned by your router. IPv4 Secondary DNS – the secondary DNS assigned by your router. Search Domain – This refers to the domain you use in public. IPv6 Address/Prefix Length – This is the current IPv6 address and prefix length. IPv6Default Gateway – This is the IPv6 gateway. IPv6 Primary DNS – This is the IPv6 Primary DNS. IPv6 Secondary DNS – This is the IPv6 secondary  DNS. PPPoE Status – if you are using PPPoE will show success otherwise if you are not using it, it will show a failure DDNS Status – this will be disabled if you are not using DDNS.  Advanced – Log These settings display the Current Log of the device. Click the Clear button to reset the log or click the Download button to download a file in txt format   Registration Click the Registration tab to redirect you to the Trendnet website.
                   ©  Copyright 2013 TRENDnet. All Rights Reserved.       TRENDnet User’s Guide TV-IP862IC  58  When you click the Registration button, you are redirected to the Trendnet registration website.
                   ©  Copyright 2013 TRENDnet. All Rights Reserved.       TRENDnet User’s Guide TV-IP862IC  59 Install TRENDnetVIEW Pro Software4 Click Autorun.   Click on the link, Install TRENDnetVIEW Pro Software, to install it.  Using the proprietary-based configuration interface  This section describes the how to setup a camera using the TRENDnetView Pro 2.0 camera monitoring software. To install TRENDnetView Pro 2.0 on a system running Windows, launch the TRENDnetView Pro 2.0 installation software on the installation CD-ROM and follow the setup instructions. Once the software is installed, the TRENDnet View Pro 2.0 camera monitoring utility is ready for use. Add up to 32 network cameras to monitor using the software. Additional software, TRENDnet IPView Pro Player                                                                  4 Please refer to TRENDnetView Pro User Guide for a more detailed installation experience. software is also installed. The TRENDnetView Pro 2.0 Player is used for playing recorded video from cameras that have been configured to save recorded files.  Running the Software When the wizard starts, you have the option to select a language. The default is English.   Alternatively, there are 13 other languages to choose from. Select the one that best suits your needs.   The next screen displays the Welcome screen. Click Next to continue.
                   ©  Copyright 2013 TRENDnet. All Rights Reserved.       TRENDnet User’s Guide TV-IP862IC  60   Please view the TRENDnetVIEW Pro User Guide for more details on the software.
                   ©  Copyright 2013 TRENDnet. All Rights Reserved.       TRENDnet User’s Guide TV-IP862IC  61  How to setup/access the camera remotely  You can either setup the Dynamic DNS connection via camera itself or your home router. An account from any of the listed DDNS providers is required prior to this operation.   Configure DDNS on your Camera  1. Go to Camera’s DDNS Setting page, click Enable to activate the feature. Then select a DDNS provider from the list.    2. Enter your DDNS’s the Host Name, User Name and Password.     3. In the Port Number section, assign an HTTP port of the camera. The default HTTP Port on the camera is 80. The example shows above is using port number 9000.  4. Open another web browser and go to your Router’s Web Configuration page. (In the example, TRENDnet’s TEW-651BR Wireless N router is used)  5. Go to Virtual Server* section and create a new entry.  Enable: Click Enable Name: Enter the application name (eg. CameraName) Protocol: Select TCP Private Port: The HTTP port that you assign on your Camera.  Public Port: The port used on remote side to access to your Camera.   LAN Server: The local IP address of your Camera.
                   ©  Copyright 2013 TRENDnet. All Rights Reserved.       TRENDnet User’s Guide TV-IP862IC  62  Then click Add to add the application.   * Please refer to your router’s user’s manual for detail Virtual Server setting.  Some router might use Port Forwarding or Special applications for this function.  The setup steps should be very similar.   6. Open another web browser and enter your DDNS domain and camera’s port number.   http://yourDomainName:PortNumber    7. Camera’s login page will appear.   Configure DDNS on your router 1. Go to Camera’s DDNS  Ports Number section, assign a HTTP port for your camera and click Apply.   2. Login to your router’s web configuration page.  3. Find the Dynamic DNS configuration section.
                   ©  Copyright 2013 TRENDnet. All Rights Reserved.       TRENDnet User’s Guide TV-IP862IC  63 4. Enable DDNS, fill out the following information and then click Apply.    5. Go to Virtual Server* section and create a new entry.  Enable: Click Enable Name: Enter the application name (eg. Camera Name) Protocol: Select TCP Private Port: The HTTP port that you assign on your Camera.  Public Port: The port used on remote side to access to your Camera.   LAN Server: The local IP address of your Camera.   Click Add to add the application.   * Please refer to your router’s user’s manual for detail Virtual Server setting.  Some router might use Port Forwarding or Special applications for this function.  The setup steps should be very similar.  6. Open another web browser and enter your DDNS domain and camera’s port number.   http://yourDomainName:PortNumber   7. The camera login page will appear.
                   ©  Copyright 2013 TRENDnet. All Rights Reserved.       TRENDnet User’s Guide TV-IP862IC 64 Technical Specifications TV-IP862IC System General  Network Processor – Faraday SOC System ROM – 16MB Flash System RAM – 128MB DDR II Ethernet Interface - 10/100BaseT Port x1 - Compliant to following standards -IEEE 802.3 compliance -IEEE 802.3u compliance -Support Full-Duplex operations -MDI/MDIX auto-negotiation -802.3x Flow Control support for Full-Duplex mode Power Supply - Input : 100 ~ 240 VAC, 0.5 A, 50 - 60 Hz  -Output : DC 12V / 1 A - Power cord length: 1.5 meters Power Consumption - Max.10.5W / 12V @motor on and IR on Environment - Operation: Temp: 0℃ ~ 40℃  Humidity: 20% ~ 85% non-condensing Storage: Temp: -25℃ ~ 70℃  Humidity: 5% ~ 95% non-condensing Certification - FCC / CE class B / LVD / Anatel Sensor and Lens Image Sensor 1/4” CMOS Sensor Image resolution 1280X 800 F-Stop F2.0 Focus Length 4.6mm Sensitivity 1 lux@IR_LED Off (minimum)  0 lux@IR_LED On Focus Depth 20cm~Infinity View Angle Horizontal – 48.8° Vertical – 31.1° Diagonal – 57.8° Image Processing Compression H.264/MPEG4/MJPEG triple format compression simultaneously Multi-profile Support 4 video profiles simultaneously Exposure Control Auto White Balance Auto Frequency 50 Hz 60 Hz Image size and frame rate 1280*800 mode /H.264 - Max Resolution: 1280x800 - Max frame rate: 30 fps Audio Input – Internal Microphone Yes Input – Sensitivity 42dB +/- 3dB (5 Meters distance min.) Input – Directivity Omni-directional Input – Frequency Response 50~16000Hz S/N More than 58 dB Output Audio Output Line Out Two-way audio Full Duplex Audio Codec PCM /ADPCM/AAC Other Day/Night Built-in ICR IR LED Built-in IR LED (Max up to 5 M) I/O Connector Micro SD slot *1 , Max support 32GB (SDHC class10) Pan/Tilt Pan range +165° ~ -165° Tilt range +90° ~ -25°
                   ©  Copyright 2013 TRENDnet. All Rights Reserved.       TRENDnet User’s Guide TV-IP862IC 65 LED & Buttons Power LED Color: Blue (Lighting when power on) Link/act. LED Color: Green (Lighting when LAN/WLAN is connected , Flashing when LAN/WLAN is transmitting video stream) WPS LED  Color: Green  Push WPS button over 3 seconds and then release WPS button, and LED blinking 1 time/sec. -WPS success: Lighting and then reboot directly. -WPS Fail: blinking 5 times/ sec for 20 seconds and then reboot directly. WPS button Push button(more than 3 seconds) to enable Wi-Fi Protected Setup (WPS) function Reset button Push button for Factory reset Wireless Interface Chipset Model Ralink RT5370 11b/g/n Host Interface USB2.0 Chipset on board IEEE 802.11b specification Standard IEEE 802.11b Radio and Modulation Type DQPSK, DBPSK, DSSS, and CCK Operating Frequency 2400 ~ 2483.5MHz ISM band Channel Numbers 11 channels for United States 13 channels for Europe Countries Data Rate 11, 5.5, 2, and 1Mbps Media Access Protocol CSMA/CA with ACK Transmitter Output Power Typical RF Output Power at each RF chain, Data Rate and at room Temp. 25degree C 17.5dBm(±2dB) at 1,2,5.5,11Mbps Receiver Sensitivity Typical Sensitivity at Which Frame (1000-byte PDUs) Error Rate =8% –92dBm at 1Mbps –91dBm at 2Mbps –90dBm at 5.5Mbps –89dBm for 11Mbps IEEE 802.11g specification Standard IEEE 802.11g Radio and Modulation Type BPSK, QPSK, 16QAM, 64QAM with OFDM Operating Frequency 2400 ~ 2483.5MHz ISM band Channel Numbers 11 channels for United States 13 channels for Europe Countries Data Rate 6,9,12,18,24,36,48,54Mbps Media Access Protocol CSMA/CA with ACK Transmitter Output Power Typical RF Output Power (tolerance +-2dB) at each RF chain, Data Rate and at room Temp. 25degree C 17.5dBm at 6~12 Mbps 17.5dBm at 18 Mbps 17.5dBm at 24 Mbps 16.5dBm at 36 Mbps 15.5dBm at 48 Mbps 14.5dBm at 54 Mbps Receiver Sensitivity Typical Sensitivity at Which Frame (1000-byte PDUs) Error Rate =10% –90dBm at 6Mbps –88dBm at 9Mbps –86dBm at 12Mbps –83dBm at 18Mbps –81dBm at 24Mbps –78dBm at 36Mbps –76dBm at 48Mbps –74dBm at 54Mbps IEEE 802.11n specification Standard IEEE 802.11n Radio and BPSK, QPSK, 16QAM, 64QAM with OFDM
                   ©  Copyright 2013 TRENDnet. All Rights Reserved.       TRENDnet User’s Guide TV-IP862IC 66 Modulation Type Operating Frequency 2400 ~ 2483.5MHz ISM band Channel Numbers 11 channels for United States 13 channels for Europe Countries Data Rate From MCS0 to MCS7  MCS GI-400ns / 20MHz 0 7.2 1 14.4 2 21.7 3 28.9 4 43.3 5 57.8 6 65.0 7 72.2 Media Access Protocol CSMA/CA with ACK Transmitter Output Power  Typical RF Output Power (tolerance +-2dB) at each RF chain, Data Rate and at room Temp. 25degree C  HT20  14.5dBm at MCS0~MCS7 Receiver Sensitivity  Typical Sensitivity at Which Frame (1000-byte PDUs) Error Rate =10%  HT20 –88dBm at MCS0 –84dBm at MCS1 –81dBm at MCS2 –78dBm at MCS3 –74dBm at MCS4 –72dBm at MCS5 –70dBm at MCS6 –67dBm at MCS7 Antenna Specification   Antenna  Dipole Antenna Gain  2 dBi(max.) Operating Frequency  2.4~2.5Ghz     Firmware Specification OS Linux 2.6 Live Video (IE)  Video Profile : Profile1, Profile2 Profile3 and Profile4  Manually Snapshot, Manually Recording, Set Storage Folder  Listen/Stop Listening, Talk/ Stop Talking  Language selection: English, German, Spanish, Russian, and French  IR_LED On/Off (When “Day/Night Mode setting” is “Manual IR” mode)  Digital Zoom in /Zoom out control  Indicator 1. Motion Trigger Indicator 2. Recording Indicator Live Video (Non-IE)  Video Profile : Profile1, Profile2 Profile3 and Profile4  Manually Snapshot, Manually Recording, Set Storage Folder  Listen/Stop Listening, Talk/ Stop Talking  Language selection: English, German, Spanish, Russian, and French  IR_LED On/Off (When “Day/Night Mode setting” is “Manual IR” mode)  Digital Zoom in /Zoom out control  Indicator  1. Motion Trigger Indicator 2. Recording Indicator Digital Zoom 4X Setup wizard This wizard will guide you through a step-by-step process to configure your new IP Camera and connect the camera to the internet. Network setting  LAN Settings 1. Automatic IP Address 2. Static IP Address (Default IP:192.168.10.30) 3. PPPoE :Enable/Disable  User Name  Password  Confirm password  Port Settings 1. HTTP Port(default is 80) 2. RTSP Port(default is 554)  UPnP 1. UPnP :Enable/Disable 2. UPnP Port Forward :Enable/Disable
                   ©  Copyright 2013 TRENDnet. All Rights Reserved.       TRENDnet User’s Guide TV-IP862IC 67  External HTTP port(default is 80)  External RTSP port(default is 554)  Apple Bonjour :Enable/Disable Dynamic DNS setting  Enable/ Disable 1. Server Address 2. Host Name 3. User name 4. Password 5. Confirm Password 6. Timeout 7. Status Network Protocols support  IPv4 , IPv6 ,ARP, TCP, UDP, ICMP  DHCP Client  NTP Client  DNS Client  DDNS Client  SMTP Client  FTP Client  HTTP Server  UpnP Port Forwarding  PPPoE  LLTD  RTP (Real Time Protocol)  RTCP (Real Time Control Protocol)  RTSP (Real Time Streaming Protocol)  3GPP  SAMBA Client Image setting  Brightness (0 ~100)  Saturation (0 ~100)  Contrast (0 ~100)  Hue (0~100)  Black/White mode  Mirror (Enable/Disable)  Flip(Enable/Disable)  Frequency: 60Hz ,50Hz and Auto  White balance: Auto/ Disable  Slow Shutter: Disable, 1/15s, 1/10s, 1/7.5s, 1/3.75s  Reset to Default Video Profiles  Video Profile 1 mode 1. Encode Type: H.264/MPEG4 setting 2. Resolution Type:1280x720, 640x352, 320x176, 160x80 3. Max Frame Rate: H.264@30fps , MPEG4@30fps 4. Fixed Bit Rate: 64K, 128K, 256K, 384K, 512K, 768K, 1M, 1.5M, 2M, 3M, 4M (H.264/MPEG4 only) 5. RTSP Default URL is http://IP_Cam_IP/play1.sdp  Video Profile 2 mode 1. Encode Type: H.264/MPEG4 2. Resolution Type: 640x352, 320x176, 160x80 3. Max Frame Rate: 30fps 4. Fixed Bit Rate: 64K, 128K, 256K, 384K, 512K, 768K, 1M, 1.5M, 2M, 3M, 4M (H.264/MPEG4 only) 5. RTSP Default URL is http://IP_Cam_IP/play2.sdp  Video Profile 3 mode 1. Encode Type: JPEG 2. Resolution Type: 1280x720, 640x352, 320x176, 160x80 3. Max Frame Rate: 1280x720@5fps, 640x352/320x176/160x80@30fps 4. JPEG Quality: Low, Fair, Standard, Good, Excellent (JPEG only) 5. RTSP Default URL is http://IP_Cam_IP/play3.sdp  Video Profile 4 mode 1. Encode Type: H.264/MPEG4 2. Resolution Type: 640x352, 320x176, 160x80 3. Max Frame Rate: 30fps 4. Fixed Bit Rate: 64K, 128K, 256K, 384K, 512K, 768K, 1M, 1.5M, 2M, 3M, 4M (H.264/MPEG4 only) 5. RTSP Default URL is http://IP_Cam_IP/3gpp Audio setting  Speaker:   -Enable/ Disable -Volume adjustable: 0 ~ 100  Microphone: -Enable/ Disable -Volume adjustable: : 0 ~ 100 3GPP support  Audio codec: AAC  Video codec/MPEG4  Protocols / RTSP, RTP, RTCP System Time setting  Time Configuration 1. Time Zone Setting 2. Daylight Saving: Enable/ Disable -Auto Daylight Saving
                   ©  Copyright 2013 TRENDnet. All Rights Reserved.       TRENDnet User’s Guide TV-IP862IC 68 -Set date and time manually  Automatic Time Configuration 1. Synchronize with NTP Server  Set Date and Time manually manually setting/ Copy your PC’s Time settings Recording  Enable/ Disable 1. Trigger Event:  -Always -Motion Detection  Only during  Pre-event recording: Default is 5 seconds(between 0 to 5 seconds)  Post-event recording: Default is 5 seconds(between 0 to 60 seconds) -Sound Detection  Only during  Pre-event recording: Default is 5 seconds(between 0 to 5 seconds)  Post-event recording: Default is 5 seconds(between 0 to 60 seconds) -Scheduled 2. Recording Type  Snapshot -Source:Profiles3  Video -Source:Profiles1, 2 and 4(Default is Profile2) 3. Record to:    -Micro SD card    -Samba network device Video Clip setting  Enable/ Disable 1. Trigger Event:  -Always -Motion Detection  Scheduled -Sound Detection  Scheduled -Scheduled 2. Video Clip Type - Source: Profiles1, 2 and 4(Default is Profile2) -Pre-event recording (Between 0~5 seconds) -Maximum duration (Between 5~10 seconds) 3. Target :  -FTP Server  FTP Server IP address and port number  User Name  Password  Path  Filename Prefix  Interval: Between 60~86400 seconds(for Schedule and Always)  Send next FTP after (for Motion only)  Passive Mode: Enable/Disable -E-mail Address  Recipient E-mail Address  SMTP Mail Server  Port  User Name  Password  Sender E-mail Address  Interval: Range :60 to 86400 seconds(for Schedule and Always)  Send next E-mail after(for Motion and Sound)  Use SSL-TLS - Test Snapshot setting  Enable/ Disable 1. Trigger Event:  -Always -Motion Detection  Scheduled -Sound Detection  Scheduled -Scheduled 2. Snapshot Type -Source:Profiles3 -Single snapshot -6 snapshot with 1 or 2 second interval  3 frames before and 3 frames after motion frame
                   ©  Copyright 2013 TRENDnet. All Rights Reserved.       TRENDnet User’s Guide TV-IP862IC 69 3. Target :  -FTP Server  FTP Server IP address and port number  User Name  Password  Path  Filename Prefix  Interval: Between 60~86400 seconds(for Schedule and Always)  Send next FTP after (for Motion and Sound)  Passive Mode: Enable/Disable -E-mail Address  Recipient E-mail Address  SMTP Mail Server  Port  User Name  Password  Sender E-mail Address  Interval: Range :60 to 86400 seconds(for Schedule and Always)  Send next E-mail after(for Motion and Sound)  Use SSL-TLS Test Motion detection  Enable/ Disable: Video Motion 1. Sensitivity: Range 0~100 Drawing Mode: Draw motion area/ Erase motion area Sound Detection Enable/ Disable Detection Sensitivity: Range 50~100 Maintenance- Admin setting  Admin password setting  Add User account: 20 users maximum  User List: Delete  Authentication 1. RTSP Authentication : Enable/Disable 2. HTTP Authentication : Enable/Disable 3. Snapshot URL authentication : Enable/Disable  Device setting 1. Camera Name 2. OSD: Enable/ Disable -Label -Time Stamp : Enable/ Disable 3. LED light -Power/Link -Off -Blinking Backup and restore Setting  Save to local hard drive  Load from local hard drive  Restore to factory defaults  Reboot Device Firmware upgrade  Firmware information 1. Current firmware Version 2. Current product name Firmware upgrade System log  512 items (max) stored on the Flash drive  Clear system log  Download from device System Management  Web Based Administration  NIPCA support  ONVIF profile S RESET Function  Keep the RESET button pressed for at least 6 second to reset all configurations to factory default values.  When factory reset processing, Power LED and Link LED have switch lighting. Browser  Internet Explore Version 9 above  Firefox 13.0 or above  Safari 4.0 or above  Google Chrome 24 or above WLAN setting  Wireless : Enable/Disable (Default is “Enable”)  Network Name(SSID): (Default is “TRENDnet”)  Site Survey  Wireless Mode: Infrastructure / Ad-hoc   Security Mode: None /WEP /WPA-PSK /WPA2-PSK  Authentication:  1. WEP 64/128 bits 2. WPA-PSK (TKIP/AES) ( Infrastructure support only ) 3. WPA2-PSK (TKIP/AES) ( Infrastructure support only )  Show Hidden Key  Channel ( Ad-hoc support only ) WPS Support Day/Night Mode  Auto
                   ©  Copyright 2013 TRENDnet. All Rights Reserved.       TRENDnet User’s Guide TV-IP862IC 70 setting  Manual IR  Always day mode  Always night mode  Schedule Software Specifications OS Windows XP/Vista/7 (32/64bit platform) AutoRun Installation One is Executable format, another can install to PC from CD-ROM Setting Items  Search and list IP camera  Suggestion IP address function  IP mode  Wireless setting API (SDK) Uniform interface CGI Uniform interface Mobile App Specification OS Support  Apple IOS5 or above  Android™ 2.3 or above. Trendnet CloudView  Support Cloud Link Camera  Support Local Network Camera scan  Support Initial Camera  Support video recording (optional for paid version) Zoom in/ out Pinch to control
                   ©  Copyright 2013 TRENDnet. All Rights Reserved.       TRENDnet User’s Guide TV-IP862IC 71 Troubleshooting  1. The Power LED and Ethernet Activity LED do not light up. The power supply or camera might be faulty. Check that the connection to both the power source and the terminal on the back of the camera are secure and that you are using the provided power supply. If the camera is otherwise functioning correctly, the LEDs might have been disabled in the configuration. See the section of this guide on Configuration of System settings. 2. The camera can’t be accessed or access is slow There might be a problem with the network cable. To confirm that the cables are working, ping the address of a known device on the network. If the cabling is OK and your network is reachable, you should receive a reply similar to the following (…bytes = 32 time = 2 ms). Another possible problem may be that the network device such as a hub or switch utilized by the Network Camera is not functioning properly. Please confirm the power for the devices are well connected and functioning properly. 3. The camera can be accessed locally but not remotely This might be caused by a firewall. Check the Internet firewall with your system administrator. The firewall may need to have some settings changed in order for the Network Camera to be accessible outside your local LAN. For more information, please refer to the section about installing your camera behind a router. Make sure that the Network Camera isn’t conflicting with any Web server you may have running on your network. The default router setting might be a possible reason. Check that the configuration of the router settings allow the Network Camera to be accessed outside your local LAN. 4. White vertical lines appear on the image from the camera It could be that the CMOS sensor (a square panel situated behind the lens that measures the light signals and changes it into a digital format so your computer can present it into an image that you are familiar with) has become overloaded when it has been exposed to bright lights such as direct exposure to sunlight or halogen lights. Reposition the Network Camera into a more shaded area immediately as prolonged exposure to bright lights will damage the CMOS sensor. 5. The camera images are ‘noisy’ Often if the camera is in a low-light environment, the images can contain a lot of noise. Try enabling Night mode and see if that improves the image quality. Otherwise, try to use the camera in a location where there is a bit more light. 6. The camera images are of poor quality. Make sure that your computer’s display properties are set to at least 16-bit color. Using 16 or 256 colors on your computer will produce dithering artifacts in the image, making the image look as if it is of poor quality. Try also adjusting the brightness, contrast, saturation, light frequency and anti-flicker controls on the Video Settings under the Configuration menu. You may also consider adjusting the resolution of the camera and the compression rate to improve the image. 7. Video can’t be viewed through the web browser interface. ActiveX might be disabled. If you are viewing the images from Internet Explorer make sure ActiveX has been enabled in the Internet Options menu. You may also need to change the security settings on your browser to allow the ActiveX plug-in to be installed. If you are using Internet Explorer with a version number lower than 6, then you will need to upgrade your Web browser software in order to view the streaming video transmitted by the Network Camera. Try also viewing the video using Java. Ensure that you have the latest version of Java installed before you do. Go to www.java.com for more information.
                   ©  Copyright 2013 TRENDnet. All Rights Reserved.       TRENDnet User’s Guide TV-IP862IC 72 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device,  pursuant  to  Part  15  of  the  FCC  Rules.    These  limits  are  designed  to  provide reasonable  protection  against  harmful  interference  in  a  residential  installation.    This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.  However, there is no guarantee that interference will not occur in a particular  installation.    If  this  equipment  does  cause  harmful  interference  to  radio  or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect  the  equipment  into  an  outlet  on  a  circuit  different  from  that  to  which  the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC  Caution:  Any  changes  or  modifications  not  expressly  approved  by  the  party responsible for compliance could void the user's authority to operate this equipment. IEEE 802.11b or 802.11g operation of this product in the U.S.A. is firmware-limited to channels 1 through 11. IMPORTANT NOTE: FCC Radiation Exposure Statement: This  equipment  complies  with  FCC  radiation  exposure  limits  set  forth  for  an uncontrolled  environment.  This  equipment  should  be  installed  and  operated  with minimum distance 20cm between the radiator & your body. This  transmitter  must  not  be  co-located  or  operating  in  conjunction  with  any  other antenna or transmitter.  Europe – EU Declaration of Conformity This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The  following  test  methods  have  been  applied  in  order  to  prove  presumption  of conformity with the essential requirements of the R&TTE Directive 1999/5/EC: EN 60950-1:2006+A11:2009+A1:2010+A12:2011 Safety of Information Technology Equipment EN 62311: 2008 Assessment  of  electronic  and  electrical  equipment  related  to  human  exposure restrictions for electromagnetic fields (0 Hz-300 GHz) (IEC 62311:2007 (Modified)) EN 300 328 V1.7.1: (2006-10) Electromagnetic  compatibility  and  Radio  spectrum  Matters  (ERM);  Wideband Transmission systems; Data transmission equipment operating in the 2,4 GHz ISM band and  using spread  spectrum  modulation techniques; Harmonized  EN  covering essential requirements under article 3.2 of the R&TTE Directive EN 301 489-1 V1.9.2: 2011 Electromagnetic  compatibility  and  Radio  Spectrum  Matters  (ERM);  ElectroMagnetic Compatibility  (EMC)  standard  for  radio  equipment  and  services;  Part  1:  Common technical requirements EN 301 489-17 V2.1.1 (2009-05)  Electromagnetic  compatibility  and  Radio  spectrum  Matters  (ERM);  ElectroMagnetic Compatibility  (EMC)  standard  for  radio  equipment  and  services;  Part  17:  Specific conditions for 2,4 GHz wideband transmission systems This device is a 2.4 GHz wideband transmission system (transceiver), intended for use in all EU member states and EFTA countries, except in  France and  Italy where restrictive use applies.  In Italy the end-user should apply for a license at the national spectrum authorities in order to obtain authorization to use the device for setting up outdoor radio links and/or for supplying public access to telecommunications and/or network services. This device  may not  be used for setting up outdoor  radio links in France and in some areas the RF output  power  may  be  limited  to  10  mW  EIRP  in  the  frequency  range  of 2454 – 2483.5 MHz. For detailed information the end-user should contact the national spectrum authority in France.
                   ©  Copyright 2013 TRENDnet. All Rights Reserved.       TRENDnet User’s Guide TV-IP862IC 73 This device is designed to provide uninterrupted monitoring and/or recording. This device does not off power management functionality such as Off mode or Standby mode. IMPORTANT NOTE: NCC AND FCC Warning Statement FOR COUNTRY CODE SELECTION USAGE (WLAN DEVICES)  Note: This country code selection is for non-US models only and is not available to all US models. Per FCC regulation, all WiFi products marketed in the US must be fixed to US operation channels only.  以下警語適用台灣地區 經型式認證合格之低功率射頻電機,非經許可,公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。 低功率射頻電機之使用不得影響飛航安全及干擾合法通信;經發現有干擾現象時,應立即停用,並改善至無干擾時方得繼續使用。前項合法通信,指依電信法規定作業之無線電通信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾
                   ©  Copyright 2013 TRENDnet. All Rights Reserved.       TRENDnet User’s Guide TV-IP862IC 74 Česky [Czech] TRENDnet tímto prohlašuje, že tento TV-IP862IC je ve shodě se základními požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES. Dansk [Danish] Undertegnede TRENDnet erklæ rer herved, at følgende udstyr TV- TV-IP862IC overholder de væ sentlige krav og øvrige relevante krav i direktiv 1999/5/EF. Deutsch [German] Hiermit erklärt TRENDnet, dass sich das Gerät TV-IP862IC in Ü bereinstimmung mit den grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet. Eesti [Estonian] Käesolevaga kinnitab TRENDnet seadme TV-IP862IC vastavust direktiivi 1999/5/EÜ  põhinõuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele sätetele. English Hereby, TRENDnet, declares that this TV-IP862IC is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Español [Spanish] Por medio de la presente TRENDnet declara que el TV-IP862IC cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE. Ελληνική [Greek] ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ TRENDnet ΔΗΛΩΝΕΙ ΟΤΙ TV-IP862IC ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ. Français [French] Par la présente TRENDnet déclare que l'appareil TV-IP862IC est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE. Italiano [Italian] Con la presente TRENDnet dichiara che questo TV-IP862IC è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE. Latviski [Latvian] Ar šo TRENDnet deklarē, ka TV-IP862IC atbilst Direktīvas 1999/5/EK būtiskajām prasībām un citiem ar to saistītajiem noteikumiem. Lietuvių [Lithuanian]  Šiuo TRENDnet deklaruoja, kad šis TV-IP862IC atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas. Nederlands [Dutch] Hierbij verklaart TRENDnet dat het toestel TV-IP862IC in overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG. Malti [Maltese] Hawnhekk, TRENDnet, jiddikjara li dan TV-IP862IC jikkonforma mal-ħtiġijiet essenzjali u ma provvedimenti oħrajn relevanti li hemm fid-Dirrettiva 1999/5/EC. Magyar [Hungarian] Alulírott, TRENDnet nyilatkozom, hogy a TV-IP862IC megfelel a vonatkozó alapvetõ követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak. Polski [Polish] Niniejszym TRENDnet oświadcza, że TV-IP862IC jest zgodny z zasadniczymi wymogami oraz pozostałymi stosownymi postanowieniami Dyrektywy 1999/5/EC. Português [Portuguese] TRENDnet declara que este TV-IP862IC está conforme com os requisitos essenciais e outras disposições da Directiva 1999/5/CE. Slovensko [Slovenian] TRENDnet izjavlja, da je ta TV-IP862IC v skladu z bistvenimi zahtevami in ostalimi relevantnimi določili direktive 1999/5/ES. Slovensky [Slovak] TRENDnet týmto vyhlasuje, že TV-IP862IC spĺňa základné požiadavky a všetky príslušné ustanovenia Smernice 1999/5/ES. Suomi [Finnish] TRENDnet vakuuttaa täten että TV-IP862IC tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen. Svenska [Swedish] Härmed intygar TRENDnet att denna TV-IP862IC står I överensstämmelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG.
                   ©  Copyright 2013 TRENDnet. All Rights Reserved.      75  TRENDnet User’s Guide Limited Warranty Limited Warranty TRENDnet  warrants  its  products  against  defects  in  material  and  workmanship,  under normal use and service, for the following lengths of time from the date of purchase.     TV-IP862IC – 3 Years Warranty AC/DC Power Adapter, Cooling Fan, and Power Supply carry 1 year warranty. If  a  product  does  not  operate  as  warranted  during  the  applicable  warranty  period, TRENDnet  shall  reserve  the  right,  at  its  expense,  to  repair  or  replace  the  defective product  or  part  and  deliver  an  equivalent  product  or  part  to  the  customer.  The repair/replacement  unit’s  warranty  continues  from  the  original  date  of  purchase.  All products  that are replaced  become the  property  of  TRENDnet.  Replacement  products may  be  new  or  reconditioned.  TRENDnet  does  not  issue  refunds  or  credit.  Please contact the point-of-purchase for their return policies. TRENDnet shall not be responsible for any software, firmware, information, or memory data of customer contained in, stored on, or integrated with any products returned to TRENDnet pursuant to any warranty. There are no user serviceable parts inside the product.  Do not  remove or attempt to service the product by any unauthorized service center.  This warranty is voided if (i) the product  has  been  modified  or  repaired  by  any  unauthorized  service  center,  (ii)  the product was subject to accident, abuse, or improper use (iii) the product was subject to conditions more severe than those specified in the manual. Warranty  service  may  be  obtained  by  contacting  TRENDnet  within  the  applicable warranty period and providing a copy of the dated proof of the purchase. Upon proper submission of required documentation a Return Material Authorization (RMA) number will be issued. An RMA number is required in order to initiate warranty service support for all  TRENDnet  products.  Products that are  sent to  TRENDnet for  RMA service must have the RMA number marked on the outside of return packages and sent to TRENDnet prepaid,  insured  and  packaged  appropriately  for  safe  shipment.  Customers  shipping from outside of the USA and Canada are responsible for return shipping fees. Customers shipping from outside of the USA are responsible for custom charges, including but not limited to, duty, tax, and other fees.  WARRANTIES  EXCLUSIVE:  IF  THE  TRENDNET  PRODUCT  DOES  NOT  OPERATE  AS WARRANTED  ABOVE,  THE  CUSTOMER’S  SOLE  REMEDY  SHALL  BE,  AT  TRENDNET’S OPTION,  REPAIR  OR  REPLACE.  THE  FOREGOING  WARRANTIES  AND  REMEDIES  ARE EXCLUSIVE  AND  ARE  IN  LIEU  OF  ALL  OTHER  WARRANTIES,  EXPRESSED  OR  IMPLIED, EITHER  IN  FACT  OR  BY  OPERATION  OF  LAW,  STATUTORY  OR  OTHERWISE,  INCLUDING WARRANTIES  OF  MERCHANTABILITY  AND  FITNESS  FOR  A  PARTICULAR  PURPOSE. TRENDNET NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT ANY OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION MAINTENANCE OR USE OF TRENDNET’S PRODUCTS.  TRENDNET  SHALL  NOT  BE  LIABLE  UNDER  THIS  WARRANTY  IF  ITS  TESTING  AND EXAMINATION DISCLOSE THAT THE ALLEGED DEFECT IN THE PRODUCT DOES NOT EXIST OR  WAS  CAUSED  BY  CUSTOMER’S  OR  ANY  THIRD  PERSON’S  MISUSE,  NEGLECT, IMPROPER  INSTALLATION  OR  TESTING,  UNAUTHORIZED  ATTEMPTS  TO  REPAIR  OR MODIFY,  OR  ANY  OTHER  CAUSE  BEYOND  THE  RANGE  OF  THE  INTENDED  USE,  OR  BY ACCIDENT, FIRE, LIGHTNING, OR OTHER HAZARD.  LIMITATION  OF  LIABILITY:  TO  THE  FULL  EXTENT  ALLOWED  BY  LAW  TRENDNET  ALSO EXCLUDES  FOR  ITSELF  AND  ITS  SUPPLIERS  ANY  LIABILITY,  WHETHER  BASED  IN CONTRACT  OR  TORT  (INCLUDING  NEGLIGENCE),  FOR  INCIDENTAL,  CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND, OR FOR LOSS OF REVENUE OR PROFITS,  LOSS  OF  BUSINESS,  LOSS  OF  INFORMATION  OR  DATE,  OR  OTHER  FINANCIAL LOSS  ARISING  OUT  OF  OR  IN  CONNECTION  WITH  THE  SALE,  INSTALLATION, MAINTENANCE, USE, PERFORMANCE, FAILURE, OR INTERRUPTION OF THE POSSIBILITY OF SUCH DAMAGES, AND LIMITS ITS LIABILITY TO REPAIR, REPLACEMENT, OR REFUND OF THE PURCHASE PRICE PAID, AT TRENDNET’S OPTION. THIS DISCLAIMER OF LIABILITY FOR DAMAGES WILL NOT BE AFFECTED IF ANY REMEDY PROVIDED HEREIN SHALL FAIL OF ITS ESSENTIAL PURPOSE.  Governing  Law:  This  Limited  Warranty  shall  be  governed  by  the  laws  of  the  state  of California. Some  TRENDnet  products  include  software  code  written  by  third  party  developers. These  codes  are  subject  to  the  GNU  General  Public  License  ("GPL")  or  GNU  Lesser General Public License ("LGPL").  Go  to  http://www.trendnet.com/gpl  or  http://www.trendnet.com  Download  section and  look  for  the desired  TRENDnet product to access to  the  GPL  Code or LGPL Code. These codes are distributed WITHOUT WARRANTY and are subject to the copyrights of the developers. TRENDnet does not provide technical support for these codes. Please go to  http://www.gnu.org/licenses/gpl.txt  or  http://www.gnu.org/licenses/lgpl.txt  for specific terms of each license. V1.0R / 04.08.2013

Navigation menu