TRENDnet Output EN Datasheet TI SG104 (v1.0R)
User Manual: TRENDnet .trendnet.com - /TI-SG104/datasheet/
Open the PDF directly: View PDF 
.
Page Count: 3
| Download | |
| Open PDF In Browser | View PDF |
TI-SG104 Industrial Gigabit UPoE Splitter TI-SG104 (v1.0R) • Power a non-PoE device up to 100m (328 ft.) away from PSE • Splits a gigabit PoE signal into separate power and data sources • A single Ultra PoE source can power up to two devices • Adjustable voltage output supports 12V, 16V, 24V or 48V devices • For best performance pair with UPoE switches or injectors • Save on installation and equipment cost • Full Duplex Gigabit speeds • IEEE 802.3bt compatible TRENDnet’s Industrial Gigabit UPoE Splitter, model TI-SG104, networks a non-PoE device by using a Gigabit Ultra PoE connection and splitting it into separate power and gigabit data sources. The industrial gigabit UPoE splitter can power to up to two devices from a single UPoE source. A convenient DIP switch adjusts output power to 12V, 16V, 24V, or 48V in order to match power requirements for non-PoE devices. The UPoE splitter’s dual DC power output provides greater device compatibility. TI-SG104 UPoE Powered Adjustable Voltage Output Wall Mountable No power adapter necessary; the UPoE splitter takes a UPoE network connection, and splits power and data into separate connections to network a non-PoE device with power up to 100m (328ft.). Convenient DIP switch adjusts voltage output to 12V (2.3A), 16V (2.3A), 24V (2.3A) or 48V (1.25A) to match non-PoE device power requirements. The UPoE splitter’s wall mountable design accommodates most installation scenarios. Networking Solution UPoE switch TI-SG104 Gigabit Ethernet 1 x Gigabit UPoE input port, 1 x Gigabit output port UPoE Powered No power adapter necessary; the UPoE splitter takes a UPoE network connection and splits power and data into separate connections to network a non-PoE device with power up to 100m (328 ft.) Adjustable Voltage Output Convenient DIP switch adjusts voltage output to 12V (2.3A), 16V (2.3A), 24V (2.3A) or 48V (1.25A) to match non-PoE device power requirements Dual DC Power Output Terminal Block The UPoE splitter includes a dual DC power output terminal block, powering for up to two devices Wall Mountable Wall mountable design accommodates most installation scenarios TI-SG104 Specifications Standards Device Interface • IEEE 802.3 • IEEE 802.3u • IEEE 802.3ab • IEEE 802.3af • IEEE 802.3at • IEEE 802.3bt compatible • 1 x Gigabit port • 1 x Gigabit Ultra PoE in port • 4-pin removable terminal block (dual DC output) • Adjustable output power DIP switch (48V, 24V, 16V, 12V) • LED indicator • DIN-Rail mount • Wall mount • Grounding point DIP Switch Power Terminal Block • Hardened components rated for extreme temperatures • Dual DC power output • Auto-Negotiation • ESD 4kV and Surge 2kV protection • Input: 15.4W/30W/60W/95W PoE power • Max. Consumption: 7W (splitter only) • Max. Combined DC Output: 48V (1.25A), 24V (2.3A), 16V (2.3A), 12V (2.3A) PoE Input Max. DC Output (split between two devices) 95W • 48V(1.25A) DC Output: 60W • 24V(2.3A) DC Output: 55W • 16V(2.18A) DC Output: 35W • 12V(2.25A) DC Output: 27W 60W • 48V(1.16A) DC Output: 56W • 24V(2.12A) DC Output: 51W • 16V(2.18A) DC Output: 35W • 12V(2.16A) DC Output: 26W 30W • 48V(0.52A) DC Output: 25W • 24V(0.95A) DC Output: 23W • 16V(1.37A) DC Output: 22W • 12V(1.83A) DC Output: 22W 15.4W • 48V(0.22A) DC Output: 10.6W • 24V(0.44A) DC Output: 10.7W • 16V(0.63A DC Output: 10.2W • 12V(0.85A) DC Output: 10.2W DIP 2 Function OFF OFF 48V output ON OFF 24V output OFF ON 16V output ON ON 12V output MTBF • 684,452 hours Housing • IP30 metal case • DIN-rail mount • Wall mount • Grounding point • 4KV ESD protection • 2KV surge protection Operating Temperature • - 40° – 75° C (-40° – 167° F) Operating Humidity • Max. 95% non-condensing Dimensions • 104 x 82 x 32mm (4.1 x 3.2 x 1.2 in.) Weight • 172g (6 oz.) Certifications • CE • FCC • IEC EN60950-1 • Shock (IEC 60068-2-27) • Freefall (IEC 60068-2-32) • Vibration (IEC 60068-2-6) Warranty • 3 year Data Transfer Rate • Ethernet: 10Mbps (half duplex), 20Mbps (full duplex) • Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex) • Gigabit: 2000Mbps (full duplex) Special Features DIP 1 PACKAGE CONTENTS • TI-SG104 • Quick Installation Guide • Removable terminal block • DIN-rail and wall mount kit • Dual DC power outputs, 4 pin • Wire range: 0.34mm^2 to 2.5mm^2 • Solid wire (AWG): 12-24/14-22 • Stranded wire (AWG): 12-24/14-22 • Torque: 5 lb. – In / 0.5Nm / 0.56Nm • Wire strip length: 7-8mm All references to speed are for comparison purposes only. Product specifications, size, and shape are subject to change without notice, and actual product appearance may differ from that depicted herein. 20675 Manhattan Place • Torrance • CA 90501 • USA • T: 1-888-326-6061 • F: 1-310-961-5511 • sales@trendnet.com • www.TRENDnet.com TRENDnet is a registered trademark. Other Brands and product names are trademarks of their respective holders. Information provided in this document pertain to TRENDnet products and is subject to change at any time, without notice. For the most recent product information please visit http://www.trendnet.com. Copyright © TRENDnet. All Rights Reserved. Updated: 10/30/2018
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : No Author : Allan Create Date : 2018:10:31 16:24:27-07:00 Modify Date : 2018:11:06 10:09:48-08:00 XMP Toolkit : XMP Core 5.1.2 Format : application/pdf Creator : Allan Title : output.cdr Creator Tool : CorelDRAW X8 Metadata Date : 2018:11:01 10:05:37-07:00 Producer : Corel PDF Engine Version 18.0.0.448 Document ID : uuid:e298be43-0e2c-4259-a366-b4f4b02b0805 Instance ID : uuid:cfc6fecf-5652-4ce8-a592-f5b3b333a9e8 Page Count : 3 Profile CMM Type : Linotronic Profile Version : 2.1.0 Profile Class : Display Device Profile Color Space Data : RGB Profile Connection Space : XYZ Profile Date Time : 1998:02:09 06:49:00 Profile File Signature : acsp Primary Platform : Microsoft Corporation CMM Flags : Not Embedded, Independent Device Manufacturer : Hewlett-Packard Device Model : sRGB Device Attributes : Reflective, Glossy, Positive, Color Rendering Intent : Perceptual Connection Space Illuminant : 0.9642 1 0.82491 Profile Creator : Hewlett-Packard Profile ID : 0 Profile Copyright : Copyright (c) 1998 Hewlett-Packard Company Profile Description : sRGB IEC61966-2.1 Media White Point : 0.95045 1 1.08905 Media Black Point : 0 0 0 Red Matrix Column : 0.43607 0.22249 0.01392 Green Matrix Column : 0.38515 0.71687 0.09708 Blue Matrix Column : 0.14307 0.06061 0.7141 Device Mfg Desc : IEC http://www.iec.ch Device Model Desc : IEC 61966-2.1 Default RGB colour space - sRGB Viewing Cond Desc : Reference Viewing Condition in IEC61966-2.1 Viewing Cond Illuminant : 19.6445 20.3718 16.8089 Viewing Cond Surround : 3.92889 4.07439 3.36179 Viewing Cond Illuminant Type : D50 Luminance : 76.03647 80 87.12462 Measurement Observer : CIE 1931 Measurement Backing : 0 0 0 Measurement Geometry : Unknown Measurement Flare : 0.999% Measurement Illuminant : D65 Technology : Cathode Ray Tube Display Red Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Green Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Blue Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract)EXIF Metadata provided by EXIF.tools